Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

LEADSCREW, SCREW JAC

Active
SPE7L3-26-T-123TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of a lead screw for a screw jack, identified by part number D2758-01-00 and NSN 3010-01-732-3696, with a quantity of four units required. The item is classified as a critical application item, and while unit identification is not mandated, all delivery and packaging must adhere strictly to DLA and MIL-STD guidelines. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, with marking conforming to MIL-STD-129 and no special marking codes applied. Palletization follows DLA packaging requirements, and delivery is FOB origin with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and the delivery window is set for 208 days from the contract award, with a firm need ship date of February 25, 2027. The item must not contain any Class I ozone-depleting chemicals, a prohibition that overrides any conflicting specification language, and substitutes require prior approval unless explicitly permitted. The contract is issued under solicitation number SPE7L3-26-T-123T as a total small business set-aside under NAICS code 333612, awarded by the Department of Defense’s Land Supplier Operations Vehicle Support branch. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation or award date depending on acquisition size. The destination for delivery is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation logistics are governed by DLAD procedural notes C19 and C20. The point of contact for the contract is Benita Umoren, reachable via phone and email, and full details including unit of issue conversion are available through official DoD resources. All terms are binding under federal procurement guidelines, with strict adherence to compliance, environmental restrictions, and logistical directives.

General Info

Four lead screws, part D2758-01-00, DLA/MIL-STD compliant, FOB origin, deliver by Feb 25, 2027, no ozone-depleting chemicals.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

333612 - Speed Changer, Industrial High-Speed Drive, and Gear ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(1)

RFQ SPE7L3-26-T-123T for DLA Land and Maritime Vehicle Support

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUS
Contacts
Benita Umoren
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
LEADSCREW,SCREW JAC
LEADSCREW,SCREW JACK
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
CRITICAL APPLICATION ITEM
NOOK INDUSTRIES LLC 57855 P/N D2758-01-00
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017529518 0001 EA 4.000
NSN/MATERIAL:3010017323696
DELIVERY (IN DAYS):0208
SPE7L3-26-T-123T
SECTION B
PR: 7017529518 PRLI: 0001 CONT’D
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/25/2027 Original Required Delivery Date:02/25/2027
SPE7L3-26-T-123T NSN/Part Number: 3010-01-732-3696 Quantity: 4 EA Purchase Request: 7017529518QTY: 4 Delivery: 208 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333612
New
DIBBS
Supply of HUB (NSN 3930-01-123-2526)One unit of a HUB identified by NSN 3930-01-123-2526 and part number 679739 is to be procured and delivered in full compliance with all packaging, labeling, and invoicing specifications. Delivery must be completed within five days of contract award, with terms set at FOB origin. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, under a subcontract type with NAICS code 333612. The contract is managed by the Department of Defense under the agency name Construction & Equipment Manu & Con, and performance is required at a location in McAlester, Oklahoma, with a zip code of 74501-5000.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333612
New
DIBBS
UNIVERSAL JOINT, NONVEHThe contract is for the procurement of four universal joints, nonvehicular, identified by NSN 3010-01-400-6047, under solicitation SPE7L1-26-Q-1335, with a total small business set-aside and a 241-day delivery timeline. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA standards, and the use of Class I ozone-depleting chemicals is strictly prohibited; any substitutions require prior approval unless explicitly authorized by the specification. The supply is subject to stringent configuration change management, requiring engineering change proposals and formal variance requests for any deviations. Inspection and acceptance may occur at the manufacturer’s origin, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting access to foreign persons and requiring compliance with DFARS 252.225-7048; only DLA-approved contractors holding JCP certification, who have completed required DOD training and questionnaire, may access this data. Cybersecurity requirements mandate CMMC Level 2 certification by a certified third-party assessment organization, and covered defense information protocols are enforced. The contracting activity is the Department of Defense’s Land Supply Chain, with performance to be delivered to Tracy, CA, and primary point of contact is Meghan Ruehle.
LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 9 days
View Details
NAICS: 333612
New
DIBBS
GEAR, SPURThe contract pertains to the procurement of 17 spur gears identified by NSN 3020-00-869-5437 under solicitation SPE4A5-26-R-0245, with a delivery deadline of 368 days after award. This is a Navy-identified critical safety item requiring strict adherence to MIL-STD-129 for marking, including lot and serial numbers, contractor and actual manufacturer CAGE codes, and part numbers on each unit pack. Although item unique identification is not required per the service customer’s request, all supplies must comply with DLA packaging standards and the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stipulated, and attributes are assigned verification levels or AQLs based on criticality. The manufacturer must hold SAE AS9100 certification, and all configuration changes, waivers, or deviations must be formally submitted and approved by the DSC contracting officer. The item has no shelf life limitation, and cybersecurity compliance requires a CMMC Level 2 self-assessment. Measuring and test equipment used must be calibrated and documented, and government identification must be removed from non-accepted supplies per RQ011. All documentation related to source approval and quality assurance must be maintained per RC001 and RQ002.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 13 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333612
New
DIBBS
HANDWHEELThe contract specifies the procurement of a handwheel with NSN 5340011791733 under solicitation SPE7L1-26-T-853G, requiring a total quantity of six units—four units under CLIN 0001 and two units under CLIN 0002—each priced at $1.00, with a firm fixed price and zero variance allowed. Delivery is due within 20 days from the required delivery date of July 16, 2026, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-129 for marking and labeling, and palletization must adhere to DLA’s RP001 packaging requirements, with non-hazardous items packaged per ASTM D3951 unless superseded by stricter DLA Master List technical and quality requirements. Hazardous materials must meet IP025 specifications. Sampling and quality verification follow MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, and inspection must result in zero non-conformances unless otherwise stated. The item is subject to MIL-STD-130N identification and may require casting or forging, for which the contractor must seek assistance through DLA’s designated channels if tooling is not available. Shipping must use traceable methods only, with distinct destination addresses for each CLIN—one at Homestead AFB, Florida, and the other at Portland, Oregon. The contract is issued by the Department of Defense’s Land Supply Chain, with point of contact Michael Nordahl, and aligns with NAICS code 333612 for specialized machinery manufacturing.
LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333612
New
DIBBS
HUBThis contract, issued under solicitation SPE8EF-26-T-1471, pertains to the procurement of one unit of items identified by NSN 3930-01-123-2526 and part number 679739, sourced from multiple suppliers including NACCO Materials Handling Group Inc, Schrader Material Handling Inc, Hyster-Yale Group Inc, and ASRC Federal Facilities Logistics LLC. The delivery is required within five days of contract award, with all goods to be shipped FOB origin and inspected and accepted at the destination. The item is to be packaged in accordance with ASTM D3951, with DLA’s Master List of Technical and Quality Requirements taking precedence over any general standards. Packaging must be marked and labeled per MIL-STD-129 and palletized in compliance with RP001: DLA Packaging Requirements for Procurement. The sole unit of issue is each, with zero tolerance for quantity variance. The delivery address is W44W9M, W390 McAlester Army Ammunition Plant, Installation Supply Account, Building 8, 1C Tree Road, McAlester, OK 74501-5000, with shipments required to be sent by the fastest traceable means, explicitly prohibiting parcel post. The contract mandates specific marking and labeling instructions, including the use of the Military Flag Code (M/F) W44W9M619400QI, RDD code 194, and project code TP 1. The original required delivery date is July 17, 2026, with a response deadline of July 31, 2026, and the contract is managed by the U.S. Department of Defense under NAICS code 333612. All technical, quality, and packaging specifications referenced must be aligned with the DLA Master List, and any government identification on non-accepted supplies must be removed per RQ011. The point of contact is Russell Keiser, reachable through the provided email and phone number.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333612
New
DIBBS
DIFFERENTIAL GEAR UThe contract awards IVECO DEFENSE VEHICLES S.P.A. as the approved source of supply for a differential gear with part number 60212366 and NSN 2520-15-026-6567, with a firm fixed price of $______ per unit for a total quantity of four units. The purchase is tied to request number 1000231442 and is governed by strict quantity controls with zero tolerance for variance in delivery volume. Delivery is required within 90 days after order date, with the point of origin as the FOB location and acceptance and inspection both to occur at the destination. Packaging must comply with ASTM D3951 commercial standards, and all containers must meet ASTM D4169 performance requirements for shipping durability. Pricing remains fixed regardless of cost fluctuations, and the supplier is obligated to meet all packaging and marking specifications without deviation. The contract was solicited under reference number SPRAL1-26-Q-0086, with a response deadline of August 5, 2026, and is managed by the Department of Defense through the Albany Transportation Officer, with primary point of contact Garrison Ball reachable via email and phone.
ALBANY TRANSPORTATION OFFICER

POSTED

about 13 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333612
New
DIBBS
SOLENOID, ELECTRICALThe contract is a solicitation for a Soleoid, Electrical with NSN 5945-00-407-7030, issued by the Maritime Supply Chain under the Department of Defense, with a total estimated contract value ranging from $0 to $350,000. This is an Indefinite Delivery Contract (IDC), structured as a Simplified Indefinite-Delivery Contract (SIDC), with a guaranteed minimum order of four units and a maximum cumulative value of $350,000 across all delivery orders. The estimated annual quantity is 30 units, though this is not a firm commitment and pricing is not specified, leaving total value contingent on future orders. The solicitation is restricted to Women-Owned Small Businesses, with a solicitation number SPE7M1-26-U-4483, posted on July 20, 2026, and a response deadline of August 4, 2026. The contract is subject to strict compliance with military and federal standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking and barcoding, and IPC/JEDEC J-STD-609 for lead finish labeling. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, and all shipments require electronic invoicing through WAWF. The contractor must comply with prohibition clauses covering mercury and mercury-containing compounds, except in specific exempted applications such as batteries or sensors, and must ensure that portable fluorescent lamps include a secondary containment barrier per NAVSEA 5100-003D. Hazardous materials must be labeled according to 29 CFR 1910.1200, and Material Safety Data Sheets must be submitted prior to award. The contract incorporates multiple FAR and DFARS clauses regarding equal opportunity, combating human trafficking, employment verification, sustainable procurement, cybersecurity safeguards, and prohibition of covered defense telecommunications equipment. Cybersecurity requirements include adherence to NIST SP 800-171 through the 252.204-7012 clause. Offerors must provide a complete data package for both the approved and alternate parts, and are required to submit a UEI and CAGE code, with socioeconomic status representations including WOSB certification. All submissions must be made electronically through DIBBS, with no physical proposals accepted, and the primary point of contact is Bryan
MARITIME SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333612
New
DIBBS
GEARSHAFT, WORM WHEELThe contract pertains to the procurement of 35 gearshafts and worm wheels with NSN 3040-00-314-0047 and part number 123AMM50010-1, supplied by Northrop Grumman Systems Corporation under solicitation SPE4A6-26-Q-1169. Delivery is required within 694 days after the award date, with FOB origin terms and both inspection and acceptance occurring at the destination. The item is designated as a critical application item and must comply with DLA packaging requirements per RP001 and MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and packaging codes. Marking must conform to MIL-STD-129 with no special marking codes applied, and palletization must adhere to DLA standards. The item is exempt from Item Unique Identification per DFARS 252.211-7003(c)(1)(i) based on customer request. Zero tolerance for quantity variance is enforced, and sampling for quality verification follows MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise specified. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional uses in batteries, instruments, or weapon systems, with required secondary containment for portable devices per NAVSEA guidelines. The contract incorporates cybersecurity requirements including CMMC Level 2 Self-Assessment and applies to Covered Defense Information as defined in RD002. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List, with the controlling revision determined by the solicitation or award date depending on acquisition size. Documentation for source approval is required per RC001, and all supplies must comply with DLA’s packaging standards. The item is assigned to a Northrop Grumman part number and must be delivered to the DLA Distribution facility in San Diego, CA, with transportation governed by DLAD Proc Notes C19 and C20. The purchase request number is 7015851932, and the material need date is October 25, 2028. The contract explicitly prohibits intentional addition of mercury except for approved functional applications, and all packaging, marking, and compliance documentation must align with the referenced military standards and DLA policies without deviation.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333612
New
Federal
59--SOLENOID,ELECTRICALThe contract solicitation seeks electrical solenoids with NSN 5945004077030 under an RFQ issued by the DLA Land and Maritime office in Columbus, Ohio, with a response deadline of August 4, 2026. A minimum of four units must be ordered, with an initial line item for 30 units to be delivered within 61 days, though the overall procurement is structured as a potential Indefinite Delivery Contract valid for one year or until aggregate orders reach $350,000, with an estimated two orders annually. Deliveries will be directed to multiple DLA depots across CONUS and OCONUS locations through consolidated and containerized shipping. Only approved sources—25628 01085.0002 and 81978 C2J380Y—are eligible to respond. The solicitation is set aside exclusively for Women-Owned Small Businesses under NAICS code 333612, and quotes must be submitted electronically through the SAM.gov platform; no hard copies or technical specifications, plans, or drawings are provided. All responsible sources may submit bids if received by the deadline, and inquiries must be directed via the designated email address listed in the solicitation.
DLA Land And Maritime

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333612
New
Federal
30--LEADSCREW,SCREW JACThe solicitation seeks four lead screws, screw jac, identified by NSN 3010017323696, to be delivered to W1A8 DLA DISTRIBUTION within 208 days of award. The only approved source for this item is vendor 57855 with part number D2758-01-00. This is a full small business set-aside under the SBA program, with the NAICS code 333612, meaning only small business concerns are eligible to respond. The procurement is conducted as a Request for Quotation (RFQ) with no hard copies available; all submissions must be submitted electronically. Specifications, plans, or drawings are not provided, and any responsible source may submit a quote as long as it is received by the deadline. The solicitation number is SPE7L326T123T, posted on July 20, 2026, with responses due by July 31, 2026. The contracting activity is managed by the DLA Land and Maritime office in Columbus, Ohio, and all inquiries must be directed via email to the designated point of contact listed in the solicitation document, accessible through the provided SAM.gov link.
DLA Land And Maritime

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333612
New
Diesel Emergency Generator SupplyAmtrak is seeking a subcontractor to supply an industrial-grade diesel emergency generator system designed to deliver full backup power for the Lacolle facility, ensuring uninterrupted operations during primary power outages. The system must meet rigorous performance standards for reliability, output capacity, and durability under demanding environmental conditions, with all components engineered for seamless integration into existing building infrastructure. The solicitation is open for responses until July 30, 2026, and is categorized under NAICS code 333612, which pertains to the manufacturing of other industrial and commercial machinery and equipment. Though no specific set-aside provisions or point of contact details are provided, submissions are to be submitted through Amtrak’s official procurement portal, and the place of performance is confirmed as the Lacolle facility with no other location alternatives specified.
Amtrak

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333612
New
DIBBS
Tapered Roller Bearing Manufacturing and SupplyThe contract seeks the manufacture or sourcing of 307 units of tapered roller bearings identified by NSN 3110-00-100-0323, requiring full compliance with applicable military specifications and domestic content requirements. The work must be performed at the designated place of performance in Anniston, Alabama, with delivery expected to meet stringent defense standards for quality, reliability, and traceability. All components and manufacturing processes must satisfy federal regulations ensuring that the bearings are produced entirely within the United States. This subcontract opportunity, posted on July 19, 2026, with a response deadline of July 27, 2026, is managed by the ASC Commodities Division under the Department of Defense and falls under NAICS code 333612 for bearing and gearbox manufacturing. Prospective bidders must demonstrate capability to meet exact military specs and provide documentation verifying domestic origin of materials and labor. The contract does not specify a set-aside designation, making it open to eligible contractors capable of fulfilling the technical and compliance requirements. All submissions must be made through the provided DIBBS portal to be considered.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 339991
New
DIBBS
Nonmetallic Special Shaped Seal Manufacturing & SupplyFour nonmetallic special shaped seals, Part No. 146T7264-13 with NSN 5330-01-727-5389, are to be manufactured and supplied for a critical application requiring strict compliance with FAA airworthiness standards and Defense Logistics Agency specifications. Full supply chain traceability is mandatory to ensure material integrity and regulatory adherence throughout production. The items must be delivered FOB origin to Tinker AFB, Oklahoma, with an estimated delivery window aligning with the submission deadline of July 31, 2026. This subcontract falls under NAICS code 339991 and is issued under the Department of Defense’s Land Supplier Operations Vehicle Support organization, with no set-aside provisions designated. All manufacturing must meet the stringent quality and documentation requirements inherent to defense and aviation critical components.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance for Covered Defense InformationThis contract requires the implementation of NIST SP 800-171 security controls to ensure compliance with DFARS cybersecurity requirements for contractor information systems handling covered defense information. The work is scoped to safeguard sensitive unclassified information associated with Department of Defense contracts, mandating the adoption of specific technical, operational, and managerial safeguards outlined in the NIST framework. Performance is to be conducted at a location in Tracy, California, with a zip code of 95304-5000, and the effort is classified as a subcontract under NAICS code 541512 for other computer-related services. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and the contract is managed under the Land Supplier Ops Vehicle Support organization within the Department of Defense. All systems and processes must be configured, assessed, and documented to meet federal cybersecurity standards for protecting controlled unclassified information.
Computer Systems Design Services

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 483111
New
DIBBS
Domestic and International Shipping with U.S.-Flag Vessel ComplianceThis contract requires the transportation of military supplies via sea using U.S.-flag vessels, ensuring full compliance with Domestic and International Shipping regulations under DFARS requirements. All performance must adhere strictly to the statutory mandate that prioritizes U.S.-flag vessels for the movement of Department of Defense cargo, with any exceptions or waivers subject to rigorous justification and approval processes. The work involves managing logistics across both domestic and international maritime routes while maintaining transparency and documentation to meet federal compliance standards. The contract is classified as a subcontract with a NAICS code of 483111, indicating a focus on deep sea, coastal, and great lakes water transportation services. Performance is designated to occur in Tracy, California, with a posting date of July 20, 2026, and a response deadline of July 31, 2026. The procuring activity falls under the Department of Defense’s Land Supplier Operations Vehicle Support office, emphasizing the need for reliable, secure, and legally compliant maritime transport solutions to sustain military supply chains. Failure to comply with U.S.-flag vessel requirements or improperly seeking waivers may result in contract termination or financial penalties.
Deep Sea Freight Transportation

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and SDS ManagementThe contract titled Hazardous Materials Compliance and SDS Management is a subcontract issued by the Department of Defense under the agency name LAND SUPPLIER OPNS VEHICLE SPT, focused on providing regulatory compliance support for hazardous materials. Key responsibilities include drafting and maintaining Safety Data Sheets and implementing a comprehensive hazard communication program in alignment with applicable federal and industry standards. The work is to be performed at a specified location in Tracy, California, with a zip code of 95304-5000, and the solicitation is categorized under NAICS code 541620, indicating it relates to scientific and technical consulting services. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, giving interested parties approximately eleven days to submit proposals. There is no set-aside designation specified, meaning the contract is open to all eligible contractors without preference given to small businesses or other categories. The contract is managed through the DIBBS system with a unique identifier, SPE7L326T123Q, and all submissions must be routed through the designated online portal. While no point of contact is listed, compliance with regulatory frameworks and timely delivery of accurate hazard communication documentation are critical to successful performance under this agreement.
Environmental Consulting Services

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and PreservationThe contract requires compliance with military standards for the packaging and preservation of gaskets, encompassing all aspects of labeling, hazardous materials handling, and adherence to long-term storage requirements. All work must align with applicable defense specifications to ensure the integrity and readiness of components during extended periods of storage and transportation. The scope includes meticulous documentation and procedural adherence to safeguard against degradation, contamination, or misidentification of parts throughout the supply chain. Performance is to be executed at the designated location in Tracy, California, with a response deadline of July 31, 2026. The contract is classified as a subcontract under NAICS code 493190, which pertains to other support activities for transportation. It is sponsored by the Department of Defense under the Land Supplier Operations Vehicle Support office, and full compliance with federal regulations governing defense contracting is mandatory. Interested parties must submit proposals through the official DIBBS portal prior to the deadline to be considered.
Other Warehousing and Storage

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
Manufacturing of Gasket and Preformed Packing SetThe contract seeks the manufacturing of military-specification gaskets and preformed packing sets that must strictly conform to MIL-DTL-117 standards and uphold required shelf-life specifications. These components are critical for maintaining the integrity and operational readiness of defense systems and must be produced to exacting aerospace and defense industry benchmarks. The work is designated as a subcontract under NAICS code 332996, indicating specialized fabrication of other miscellaneous fabricated metal products, and the place of performance is located in Tracy, California, with a zip code of 95304-5000. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and is managed under the Department of Defense through the LAND SUPPLIER OPNS VEHICLE SPT organization. The contract does not specify a set-aside classification, suggesting it is open to all eligible subcontractors regardless of business size or status. All submissions must comply with the technical and compliance requirements outlined in the referenced military specification, and performance is expected to meet stringent quality and durability standards to ensure long-term functionality in demanding operational environments. The full details and submission portal are accessible via the provided DIBBS link.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CUI Protection SupportThis contract seeks support for achieving and maintaining compliance with NIST SP 800-171 Revision 2 and the Cybersecurity Maturity Model Certification Level 2 standards for systems that handle Covered Defense Information. The work requires the development and maintenance of System Security Plans, conducting self-assessments against required controls, and ensuring timely cyber incident reporting through the Defense Industrial Base Cybersecurity and Incident Reporting Portal. The contractor must demonstrate proficiency in implementing security measures aligned with these frameworks to protect Controlled Unclassified Information across the defense supply chain. The scope is focused on operational readiness within a defense context, demanding rigorous documentation, continuous monitoring, and adherence to federal cybersecurity mandates. The solicitation is structured as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses certified under the SBA’s guidelines are eligible to respond. It falls under NAICS code 541512, indicating the work involves computer systems design services. Performance is anchored in San Diego, California, with a response deadline of July 27, 2026, and the solicitation was posted on July 20, 2026. The contracting activity is managed by the Department of Defense through the Land Supplier Operations Vehicle Support office. Participation requires direct engagement with government cybersecurity expectations and the ability to integrate seamlessly into existing defense infrastructure while meeting strict compliance timelines and reporting protocols.
Computer Systems Design Services

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 424910
New
DIBBS
Defense-Compliant Packaging and Labeling ServicesThe contract requires military-compliant packaging and labeling of gaskets in accordance with MIL-DTL-117 and MIL-STD-2073-1E standards, ensuring full alignment with Department of Defense logistics and traceability protocols. This includes implementing serialization for individual items, generating DFARS Appendix F-compliant packing lists, and integrating all labeled components with the Department of Defense’s Item Unique Identification (IUID) system to maintain end-to-end accountability and inventory accuracy. The work must be performed at the designated place of performance in San Diego, California, with strict adherence to military specification requirements for durability, identification, and documentation. This is a total small business set-aside subcontract under NAICS code 424910, exclusively available to small business concerns as defined by the Small Business Administration. The opportunity was posted on July 20, 2026, with a response deadline of July 27, 2026, and is sourced through the Department of Defense’s Land Supplier Operations Vehicle Support organization. All proposals must demonstrate proven capability in military packaging, serialization, and IUID integration to meet the rigorous standards required for defense logistics, and compliance with all applicable federal acquisition regulations is mandatory.
Farm Supplies Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332996
New
DIBBS
Precision Gasket Manufacturing for Defense ApplicationsA small business subcontract is solicited for the manufacture of a critical safety gasket bearing the national stock number 5330-01-213-7017, to be produced in strict compliance with military specifications. The gasket must adhere to exacting material composition requirements, dimensional tolerances, and performance standards under operational conditions, all guided by approved technical data packages to ensure reliability and safety in defense applications. The contract is set aside entirely for small businesses under the SBA program, with the North American Industry Classification System code 332996 designating it for other miscellaneous fabrication services, reinforcing the requirement for specialized manufacturing capability. The place of performance is designated as San Diego, California, with a response deadline of July 27, 2026, and the solicitation issued under the Defense Logistics Agency’s procurement system, indicating the critical nature of the component for military vehicle systems.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339991
New
DIBBS
GASKETThis contract specifies the procurement of a critical safety item gasket with National Stock Number 5330-01-213-7017 under solicitation SPE7L3-26-Q-1195, issued as a total small business set-aside. The item must be supplied by approved manufacturers including Stillman Seal Corporation and General Electric Company, using part numbers 1154M18P06 and 1154M18P26 respectively, and must conform to Technical Data Package Revision A Gen 2 dated December 30, 2014. All supplies are subject to stringent technical and quality requirements referenced from the DLA Master List, including MIL-STD-130N for identification marking and MIL-STD-129 for labeling, with each unit required to carry lot and serial numbers. Packaging must comply with MIL-DTL-117 Type II Class C Style 1, using waterproof, greaseproof, opaque bags, and palletization must follow DLA Packaging Requirements. The gasket is designated a Critical Safety Item by the Air Force, requiring prior approval for any waivers or deviations. The contract mandates firm fixed pricing with zero variance allowed in quantity, and inspection and acceptance occur at origin. Delivery is due within 125 days after award, with freight destinations specified for San Diego and Hill AFB. Hazardous materials packaging and shipping must adhere to IP025 standards, and cybersecurity compliance requires a CMMC Level 2 self-assessment. Documentation for source approval must be submitted with the offer, and any proprietary data must meet the standards outlined in RD004 and RD002. The item is subject to SAE AS9100 non-tailored quality requirements regardless of manufacturer or non-manufacturer status, and all deliveries must include full compliance with MIL-STD-2073-1E preparation protocols and marking specifications. The contract is managed by the Department of Defense under the Land Supplier Operations Vehicle Support organization, with procurement points of contact and delivery timelines aligned to support defense logistics needs through 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332420
New
DIBBS
TANK, PRESSUREThis contract is for the procurement of two pressure tanks identified by NSN 2530-01-598-0344 and manufacturer part number C01V10378, with a total contract value of $2.00 per unit. The delivery must be completed within 244 days from the contract award, with delivery terms set at FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination facility located at Tracy, California, and the packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 standards, including special marking code ZZ for additional requirements and palletization aligned with DLA packaging guidelines. All items must adhere to DLA’s prohibition on Class I ozone-depleting chemicals, requiring approval for any substitute materials even if specifications suggest otherwise. The shipment must be sent to the designated receiving warehouse at 25600 S Chrismann Road, Tracy, CA 95304-5000, with transportation governed by DLAD Procurement Notes C19 and C20. The original required delivery date was October 14, 2026, with a revised need-by date of April 2, 2027. The contract falls under solicitation SPE7L3-26-T-123R, issued under NAICS code 332420 by the Department of Defense’s Land Supplier Operations Vehicle Support office, with primary contact Matthew Curry for inquiries.
Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
BOLT, AUTOMATIC WEAP
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details