Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Legacy Attitude Heading & Reference System (AHRS) Component Replacements – Low-cost Avionics Modernization Program II (LAMP II)

Active

FA822026RB007Federal

Response Deadline11/03/2026, 05:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Air Force is seeking industry input for the replacement of outdated Attitude Heading and Reference System (AHRS) components on the T-38 aircraft under the Low-cost Avionics Modernization Program II (LAMP II). This initiative aims to upgrade legacy avionics with modern, cost-effective solutions to enhance flight safety, reliability, and operational effectiveness without incurring high development or integration costs. The effort targets specific AHRS components that are no longer sustainable due to obsolescence, requiring new hardware and software that meet current military performance standards while ensuring compatibility with existing T-38 systems. The solicitation is open to contractors capable of delivering scalable, field-proven avionics that reduce lifecycle costs and support long-term fleet readiness. The contract opportunity is issued under NAICS code 334220 for Aerospace Product and Parts Manufacturing and is managed by the Air Force Life Cycle Management Center located at Hill Air Force Base, Utah. Responses are due by November 3, 2026, and the primary point of contact is Charity Simcox-Husa, with Mark Parker available for secondary inquiries. Performance of the work is anticipated to occur in Nibley, Utah, aligning with existing maintenance and logistics infrastructure. This sources-sought notice seeks industry capabilities, technologies, and past performance to inform the acquisition strategy and requirements definition for future procurement actions. The program reflects a broader Defense Department initiative to modernize aging platforms using affordable, commercial-off-the-shelf innovations.

General Info

U.S. Air Force seeks modern, low-cost AHRS replacements for T-38 aircraft under LAMP II by November 2026.

Agency

Department Of Defense → FA8220 Aflcmc WndtView Agency

NAICS

334220 - Radio and Television Broadcasting and Wireless Communications Equipment ManufacturingView NAICS

Place of Performance

NIBLEY, UT, USA

Set-Aside

NONE

Documents

(1)

RFI-T38-LAMP2-2026-FINAL Request for Information for T-38A/AT-38B LAMP II

DOCX•rfi

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSources Sought

PostedJul 23

Sources Sought

Response DeadlineNov 3

Submission deadline

Response Deadline

11/03/2026, 05:30:00 PM UTCin 3 months

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8220 Aflcmc Wndt

Contacts2 people available

OfficeHILL AFB, UT, 84056-5820, USA

Organization / Agency

Department Of Defense → FA8220 Aflcmc Wndt

View Agency Profile

Office AddressHILL AFB, UT, 84056-5820, USA

Contacts

Charity Simcox-Husa

contact@example.gov

+1 (555) 000-0000

Mark Parker

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

T 38 Legacy Attitude Heading & Reference System (AHRS) Component Replacements – Low-cost Avionics Modernization Program II (LAMP II)

Similar Contracts

Same NAICS industry code

HANDHELD RADIOThis solicitation for handheld radios, numbered SPMYM226Q7823, is a total small business set-aside under NAICS code 334220, issued by the Department of Defense’s DLA Maritime – Puget Sound office in Bremerton, Washington. All responses must be submitted electronically via email to diana.baldwin@dla.mil by the deadline of July 28, 2026, at 8:00 PM ET, and only fully completed and signed solicitation forms will be considered responsive. Bidders are required to provide detailed contractor information, including CAGE code, point of contact, quote, and delivery terms, with all items to be delivered FOB destination in Silverdale, Washington. Lead times and delivery dates must be clearly stated, and the manufacturer’s details—name, address, and country of origin—must be declared per Section K. Compliance with the FAR 52.204-24 requirement regarding cybersecurity and information systems must be confirmed by checking the appropriate boxes. Contractors must ensure their proposals meet the NIST SP 800-171 security requirements unless the items being quoted are classified as Commercial Off-The-Shelf (COTS), in which case an exemption applies but must be explicitly identified and documented during bidding. Any COTS items must be clearly marked and justified to the contracting officer. The solicitation must be reviewed in its entirety, with specific attention to Box 28 and the certification requirements in Boxes 30a, 30b, and 30c on Page 1. All submissions must be complete, accurate, and submitted via email only; failure to comply with any submission requirement will render a bid non-responsive. The place of performance is specified as Silverdale, Washington, with the contracting officer contact information provided for questions and submission purposes.

DLA Maritime - Puget Sound

POSTED

about 15 hours ago

DEADLINE

in about 17 hours

VOLTMETER 6625-01-477-0732The U.S. Department of Defense, through DLA Land and Maritime, is soliciting offers for a Voltmeter identified by NSN 6625-01-477-0732 under a Firm-Fixed Price Indefinite Delivery Contract with a three-year base period and two one-year option periods, utilizing FAR Part 12.201 commercial item procedures. This acquisition is a 100% Small Business Set-Aside with a size standard of 1,250 employees, and the item is subject to the Buy American Act. The estimated annual demand is 119 units, with delivery required within 99 days of issuance of each individual delivery order, and no shipments permitted prior to the issuance of a DD Form 1155. Approved sources include IDEAL PRECISION METER CO and PHAOSTRON INSTRUMENT AND ELECTRONIC, with specific part numbers designated. Offering responses must be submitted via the DIBBS system using a scanned SF1449 RFP form or via email to the designated contract specialist, and all proposals must be in English and U.S. dollars. Evaluation will consider price, delivery, and performance, with submissions due on or about August 3, 2026, and the solicitation will be available exclusively online via the DIBBS portal.

DLA Land And Maritime

POSTED

about 15 hours ago

DEADLINE

59--ANTENNAThe contract seeks the procurement of 40 units of NSN 5985013199456 ANTENNA with a delivery requirement to DLA Distribution Warner Robins within 511 days after award. Only two approved sources are authorized for this acquisition, identified as 00752 CNI22-9-1 and 00752 DMCNI22-9-1. The solicitation is issued as an RFQ under number SPE7M526Q0770 and is accessible exclusively online through the provided SAM.gov link; no hard copies are available, and no specifications, plans, or drawings are supplied. All responsible vendors may submit electronic quotes, which will be considered if received before the deadline of August 6, 2026. The opportunity is unreserved, with no set-aside classification, and falls under NAICS code 334220 for communications equipment manufacturing. The contracting activity is managed by the DLA Land and Maritime office located in Columbus, Ohio, and any questions must be directed to the designated point of contact via email, with further details available through the official DIBBS website using the solicitation number.

DLA Land And Maritime

POSTED

about 15 hours ago

DEADLINE

Radio Communication SystemThe U.S. Department of Defense, through the Office of W6QM Micc-Ft Drum located in Fort Drum, New York, has issued a solicitation for a Radio Communication System under the small business set-aside program designated as a Total Small Business Set-Aside in accordance with FAR 19.5. This combined solicitation, identified by number W911S26U3762 and classified under NAICS code 334220 for Radio and Television Broadcasting and Communications Equipment, is intended to procure a system that meets specific operational requirements for military communications. The opportunity is restricted exclusively to small businesses, ensuring eligibility and compliance with SBA size standards. The solicitation was posted on July 27, 2026, with a firm response deadline of July 29, 2026, at 8:05 p.m. Eastern Time. Although the place of performance is listed with a zip code of 22427, no specific city or state is provided in the details, indicating a potential focus on logistics coordination within the broader Department of Defense infrastructure. Jason Donovan from the contracting office serves as the primary point of contact, reachable via phone at 804-633-8737 or email at jason.r.donovan3.civ@army.mil. All proposals must be submitted through the SAM.gov portal linked in the solicitation, and failure to meet submission deadlines or compliance requirements will result in disqualification.

W6QM Micc-Ft Drum

POSTED

about 15 hours ago

DEADLINE

CCTV - Community CommonsThe solicitation FA560626QA053 for the CCTV - Community Commons project seeks a comprehensive close-circuit television security system installation at Building 441A on Spangdahlem Air Base, Germany, with performance governed by Attachment 1 – Statement of Work. The requirement includes the supply and installation of at least eight high-definition, vandal-resistant, day/night cameras with wide dynamic range, full network infrastructure, real-time monitoring, secure video storage with a minimum 30-day retention, system programming, training, warranties, and documentation. All work must comply with federal, Department of Defense, and installation-specific regulations, including antiterrorism and cybersecurity standards such as AFI 31-101 and DFARS 252.204-7012, which mandate safeguarding covered defense information and reporting cyber incidents. The contract is awarded on a lowest price technically acceptable basis, with technical acceptability assessed strictly against the Statement of Work and pricing evaluated for completeness and accuracy. Offerors must submit separate technical and price proposals via email by the extended deadline of 29 July 2026 at 1600 CEST, following a mandatory site visit scheduled for 22 July 2026 at 10:00 AM, with all attendees required to report to the visitor center by 9:20 AM for base access processing, which closes at 9:40 AM. All submissions must include a Unique Entity Identifier and CAGE code, and offerors are subject to restrictions on the use of telecommunications equipment or services from entities on the Covered List, as well as prohibitions on business with the Maduro regime or the Xinjiang Uyghur Autonomous Region. Access to the installation requires prior authorization, submission of personnel lists, completion of antiterrorism awareness training, and adherence to badge and credentialing protocols, with all credentials to be returned upon contract completion. Invoicing must be conducted electronically through Wide Area Workflow, and payment will be processed via Electronic Funds Transfer in accordance with SAM requirements. No set-aside is used, and the contract is anticipated to be a firm-fixed-price purchase order with options potentially evaluated under 52.217-5. A final site map will be provided via Amendment 0003, and compliance with all clauses including 52.252-6, 252.204-7004, 252

FA5606 52 Cons Da Lgc

POSTED

about 15 hours ago

DEADLINE

Supplier of Covered Defense Telecommunications Equipment (If Applicable)The contract requires suppliers to identify and disclose any covered defense telecommunications components embedded within marine windows, if such components are present in their products. This obligation applies specifically to subcontractors providing items related to the NAICS code 334220, which pertains to communications equipment manufacturing, and is part of a broader effort to ensure compliance with defense telecommunications security requirements. The solicitation is issued under the Department of Defense, specifically managed by the Land Supplier Opns Wheeled Vehicles office, and performance is required at the location in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. Respondents must submit their disclosures by the deadline of August 6, 2026, and the contract type is classified as a subcontract, indicating it supports a larger procurement effort rather than a direct government purchase. The supplier must determine whether their marine window products contain any covered telecommunications equipment as defined by federal regulations and provide full transparency regarding such components.

LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

DEADLINE

Commercial Supplier of Covered Defense Telecommunications EquipmentThe contract specifies the supply of telecommunications components that must fully comply with DFARS 252.204-7016, requiring strict adherence to cybersecurity and supply chain integrity standards. All vendors must disclose the full list of manufacturers involved in the production and delivery of these components and are strictly prohibited from sourcing any equipment or parts from banned entities as identified under U.S. defense regulations. The requirement applies to every level of the supply chain, ensuring that no covered telecommunications equipment or services from restricted vendors are included in any shipment or delivery under this agreement. This subcontract is issued under NAICS code 334220 for other communications equipment manufacturing and is associated with the Department of Defense, specifically under the agency name SAN DIEGO. The place of performance is designated as 92136-3581 in San Diego, California, and responses must be submitted by August 6, 2026, with the solicitation posted on July 26, 2026. The contract emphasizes full compliance with defense industrial base safeguards and expects suppliers to provide verifiable documentation attesting to the provenance and legitimacy of all telecommunications components, with potential consequences for noncompliance including termination and debarment.

POSTED

DEADLINE

Radio Communication Equipment Kit Assembly and SupplyThe contract calls for the manufacture, assembly, and delivery of 2,000 supplementary kits designed for radio and television communication equipment, with all items required to meet rigorous military specifications and packaging standards. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to respond, and the North American Industry Classification System code 334220 applies, indicating the focus on communications equipment manufacturing. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, and performance must be carried out at Fort Carson, Colorado, with the zip code 80913-4093 specified as the place of performance. The contracting activity falls under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, and interested parties must access the solicitation through the DIBBS portal using the provided link to submit proposals.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Commercial Product Sourcing and Compliance (Covered Defense Telecommunications Equipment)The contract requires the supply of commercial defense telecommunications equipment with strict adherence to Section 889 of the National Defense Authorization Act and DFARS 252.204-7017, mandating full disclosure of all sources and components to ensure no covered telecommunications equipment or services from prohibited foreign entities are included. Compliance is mandatory, and vendors must provide transparent documentation verifying the origin and supply chain integrity of all products throughout the procurement lifecycle. The item falls under NAICS code 334220, which classifies it as communications equipment manufacturing, and the requirement is structured as a subcontract under the Department of Defense’s Active Devices Division. Performance of this contract is designated for Jacksonville, Florida, with a zip code of 32212-5000, and submissions must be received by August 6, 2026. The solicitation was posted on July 26, 2026, and interested parties must respond through the DIBBS platform using the reference number SPE7M526T352G. No set-aside provisions are specified, meaning the opportunity is open to all qualified entities, but strict regulatory compliance remains the central condition for award. Failure to meet the disclosure and sourcing requirements under Section 889 will disqualify any proposal regardless of technical merit or pricing.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Precision Electrical Test Instrument Supply (Voltmeter)The contract calls for the supply of ten military-grade voltmeters adhering to the National Stock Number NSN 6625-01-229-5820 and Part Number 10080991-101, with an explicit requirement for zero-defect quality assurance throughout manufacturing, testing, and delivery. The instruments must meet stringent military specifications to ensure reliability and precision in operational environments, and the supplier is expected to demonstrate rigorous quality control processes to guarantee compliance. All units are to be delivered to Robins Air Force Base, Georgia, with the full acceptance responsibility resting on the contractor to validate performance under defined military standards. This subcontract posting, under NAICS Code 334220 for Instrument Manufacturing, was issued by the ASC Commodities Division of the Department of Defense and is open for responses until August 3, 2026. The procurement is part of a larger effort to maintain and upgrade electrical testing capabilities within defense infrastructure, and vendors must ensure full alignment with military readiness protocols. While no set-aside designation is specified, bidders are expected to comply with all applicable defense contracting regulations and deliver the full quantity of units in accordance with the technical requirements and performance expectations outlined in the referenced specifications.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Defense Telecommunications Component SupplyThe contract obligates the supplier to provide defense telecommunications components identified by the codes 7Z016, 6PZL1, and 8A310, all of which must be manufactured and marked in full compliance with military standards MIL-STD-129 and MIL-STD-130N for labeling and identification. These requirements ensure traceability, durability, and compatibility with Department of Defense logistics and inventory systems. The components are intended for use in critical military applications and must meet stringent quality and marking specifications to support operational readiness and supply chain integrity. This is a subcontract under the NAICS code 334220, issued by the Department of Defense through the LAND SUPPLIER OPNS VEHICLE SPT organization. The opportunity was posted on July 26, 2026, with a response deadline of August 6, 2026. Performance is designated to occur at New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contract is not subject to any set-aside classification, and all submissions must be made through the official DIBBS platform using the provided link to ensure timely consideration.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Defense Telecommunications Equipment SupplyThe contract titled Defense Telecommunications Equipment Supply calls for the procurement and delivery of secure, Department of Defense compliant telecommunications hardware including routers, switches, and encrypted communication devices, all of which must meet stringent military-grade security and interoperability standards. The work is classified as a subcontract under NAICS code 334220, indicating it falls within the telecommunications equipment manufacturing sector, and is being managed by the Department of Defense through the Maritime Supply Chain ESOC Buys office. All delivered equipment must be fully DoD validated, with no exceptions for commercial-off-the-shelf products that lack approved cryptographic controls or tamper-resistant design. The solicitation was posted on July 26, 2026, with a firm response deadline of August 6, 2026, and performance will be conducted globally, with no designated place of performance specified, allowing for flexible logistics planning to support global DoD operations. The contract is not set aside for any specific small business or socio-economic category, and bidders are expected to demonstrate proven capability in supplying secure telecom infrastructure to federal defense clients.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

More opportunities from Department Of Defense → FA8220 Aflcmc Wndt

Same awarding agency

Mexico F-5 Manufacture Surplus PartsThe contract solicitation FA822026RB006 seeks qualified contractors to manufacture or procure surplus spare parts for the F-5 aircraft in support of Foreign Military Sales (FMS) customers, with performance required at Nibley, Utah. The scope encompasses seven specific line items including a windshield panel, alternating current generator, gyroscope displacement component, stability augmentation system, landing gear control, control unit generator, and fire detection cable assembly, all to be delivered under firm fixed price arrangements. All parts must meet stringent quality standards, with new manufacturing requiring compliance with AS9100, AS9102, and AS9117 for aviation critical safety items, and aftermarket parts needing full traceability documentation—proof of manufacture by qualified or OEM sources, CAGE code, manufacturing date, and quality assurance acceptance—along with mandatory in-person visual inspection prior to submission, which strictly prohibits photo-based verification. Parts must be packaged and labeled per MIL-STD-2073 and MIL-STD-129, with unique item identification (UID) applied using MIL-STD-130 standards, including machine-readable data verified by automatic identification technology. Each delivery must include a signed Certificate of Conformance and functional test reports. The contract mandates adherence to a comprehensive set of Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses covering liability, termination, default, security prohibitions, whistleblower rights, safeguarding of defense information, and prohibitions on procurement from sanctioned regions such as Xinjiang and Venezuela. Deviations from standard clauses using deviation 2026-O0038 apply to material requirements, security representations, and responsibility matters. Contractors must maintain current representations and certifications in SAM.gov, including compliance with restrictions on state-sponsored terrorism ownership and foreign government-controlled price adjustments. All work must be performed at the contractor’s or approved subcontractor’s facility without requiring a security clearance, while observing operational security per DoD and Air Force directives, environmental regulations, and OSHA safety standards. Electronic invoicing through WAWF is required, and proposals must be submitted by July 29, 2026, with no discussions anticipated; awards will be made based on an integrated assessment of technical approach and price to determine best value, with non-compliance rendering an offeror ineligible. The solicitation emphasizes a robust quality control program, supply discrepancy reporting timelines up to one year post-shipment, and full flow-down of all requirements to subcontractors.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Mexico F-5 Repair and Return / OverhaulThe contract FA822026RB005, titled Mexico F-5 Repair and Return / Overhaul, is a firm fixed price procurement issued by the Air Force Life Cycle Management Center under the Department of Defense for the repair and overhaul of two specific aircraft components: the Canopy Seal Regulator and the Valve Ram Air, with a quantity of two each. Work must be completed and delivered within 120 calendar days from the date of award, with performance occurring in Nibley, Utah, and final delivery and acceptance taking place at Hill AFB, Utah. The contract is governed by a Performance Work Statement and detailed technical specifications in Attachments 1 and 3, which define the scope, deliverables, and quality standards including compliance with AS9110 and ISO 9001. Key deliverables include contractor progress reports, test and inspection reports, labor cost estimates, and variance requests, all submitted as part of the Contract Data Requirements List. Inspection and acceptance are the Government's responsibility and may occur either at the contractor’s facility or at the final delivery location under F.O.B. Origin terms, with WAWF being the exclusive system for electronic invoicing and payment requests. Evaluation for award is based on a trade-off process where technical approach is significantly more important than price, with the technical factor assessed across four subfactors: qualified repair source (critical, with an unacceptable rating disqualifying the offeror), technical ability, ramp-up timeline, and supply discrepancy reporting process. Technical risk is rated as low, moderate, high, or unacceptable, and may lead to award to a higher-priced offeror if technical merits justify the cost premium, making this a best-value, not LPTA, procurement. The solicitation requires adherence to multiple FAR and DFARS clauses including provisions on gratuities, improper activity, executive compensation reporting, and personally identifiable information control, with deviations noted for certain reporting clauses. Offerors must represent their size status and disclose UEI and CAGE codes if providing covered defense telecommunications equipment. No contract value is specified due to uncompleted pricing data, but payment processing will use DoDAAC codes and WAWF routing. All administrative roles—Contracting Officer, COR, and WAWF POC—remain to be populated by the issuing office, and no option periods or unique security requirements are stipulated beyond general compliance with existing federal regulations.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Logistics and Transportation (F.o.b. Origin)The contract requires the secure transportation of repaired valve systems from the repair facility to Hill Air Force Base in Utah, with strict adherence to chain-of-custody procedures and secure handling protocols throughout transit. All shipments are governed by F.o.b. Origin terms, meaning the responsibility and risk transfer to the buyer upon departure from the origin point. The work must be executed under the NAICS code 484220, indicating specialized freight trucking services, and is classified as a subcontract within the Department of Defense logistics network. Performance is expected to be coordinated from Nibley, Utah, and all activities must comply with federal defense transportation standards to ensure integrity and accountability of sensitive military components. The contract opportunity was posted on June 30, 2026, with a deadline for responses on July 29, 2026, at 10:30 PM UTC.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Technical Data and Documentation Support (CDRL Management)The contract requires the compilation, formatting, and delivery of technical documentation aligned with Contract Data Requirements List (CDRL) obligations for the Department of Defense. This includes producing test reports, repair logs, and certification packages that meet strict DoD compliance standards, ensuring all deliverables are accurate, complete, and properly structured for governmental review and recordkeeping. The work is focused on technical data management and support, with an emphasis on adherence to standardized formats and procedural requirements dictated by defense contracting protocols. This is a subcontract under the NAICS code 541611, specifically for administrative and support services related to management consulting and technical documentation. The opportunity was posted on June 30, 2026, with a response deadline of July 29, 2026, at 10:30 PM Eastern Time. Performance is expected to take place in Nibley, and the contracting office is tied to FA8220 Aflcmc Wndt within the Department of Defense. There is no set-aside designation specified, and no point of contact information is provided in the public record.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Non-Destructive Testing (NDT) ServicesThe contract requires the performance of non-destructive testing services on valve components used in aerospace applications, specifically employing dye penetrant, magnetic particle, and ultrasonic testing methods both before and after repair to verify structural integrity and ensure compliance with stringent aerospace safety standards. These inspections are critical to maintaining the reliability and operational safety of components subjected to high-stress environments, with all work governed by established technical and quality protocols. The contract is classified as a subcontract under NAICS code 541380, issued by the Department of Defense through the FA8220 Aflcmc Wndt organization, with performance centered in Nibley. Responses must be submitted by July 29, 2026, at 10:30 PM, following the solicitation released on June 30, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Precision Machining and Component FabricationThe contract involves the fabrication of replacement parts for valve systems requiring precision machining of critical components such as housings, seals, and regulators, all manufactured to meet original military specifications. The work is classified under NAICS code 332721, indicating it pertains to metal forging and stamping, with an emphasis on high-accuracy manufacturing required for defense applications. Performance of the work is designated to occur in Nibley, and the subcontract is issued by the Department of Defense under the FA8220 Aflcmc Wndt agency, reflecting its importance to military equipment maintenance and readiness. The solicitation was posted on June 30, 2026, with a strict response deadline of July 29, 2026, at 10:30 PM, leaving a limited window for qualified contractors to submit proposals. There is no set-aside designation listed, meaning the opportunity is open to all eligible vendors regardless of business size or classification. Although no point of contact details are provided, the official portal link gives access to additional submission requirements and technical specifications necessary for compliance. The contract is explicitly a subcontract, suggesting it is part of a broader procurement chain managed by a prime contractor under the Department of Defense's maintenance and logistics framework.

Precision Turned Product Manufacturing

POSTED

DEADLINE

Valve Ram Air System Overhaul and RepairThe contract involves the complete disassembly, inspection, repair, and reassembly of valve ram air systems to meet original equipment manufacturer and military specifications, ensuring full compliance with flight worthiness standards. All work must include rigorous testing and certification procedures to verify performance, reliability, and safety in operational environments. The scope demands precise adherence to technical requirements and documentation to maintain system integrity and regulatory compliance throughout the overhaul process. This subcontract is issued under the NAICS code 332994 and is associated with the Department of Defense, specifically the FA8220 Aflcmc Wndt agency, with performance required in Nibley. The solicitation was posted on June 30, 2026, with a firm deadline for responses on July 29, 2026, at 10:30 PM. No set-aside type is designated, and the contract is open to eligible subcontractors capable of fulfilling the highly technical overhaul work under stringent defense standards. The work environment and deliverables necessitate specialized expertise in aerospace valve systems and certified quality control processes aligned with military aviation requirements.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Battery Module SupplyThe contract pertains to the supply of five battery modules specifically designed for the electrical systems of F-5 aircraft, under a subcontract arrangement. The opportunity was posted on June 30, 2026, with a response deadline of July 29, 2026, at 10:30 PM Eastern Time. The North American Industry Classification System code 335911 applies, indicating the work falls under battery manufacturing. Performance of the contract is designated to take place in Nibley, and the contracting office is under the Department of Defense, specifically the FA8220 Aflcmc Wndt agency. No set-aside provisions or specific organization type designations are indicated, and the point of contact details are not provided within the data. The solicitation number is not assigned, and the full opportunity can be accessed through the provided SAM.gov link.

Storage Battery Manufacturing

POSTED

DEADLINE

Radiator SupplyThe contract pertains to the supply of a single radiator unit designed for the thermal management system of an F-5 aircraft, a critical component ensuring proper heat dissipation during operational conditions. The solicitation, issued under the NAICS code 333415 for other engine and engine parts manufacturing, is structured as a subcontract and is managed by the Department of Defense through the FA8220 Aflcmc Wndt office. The radiator must meet stringent military specifications for durability, performance, and compatibility within the existing aircraft thermal architecture, with delivery expected to support maintenance or upgrade cycles for the F-5 fleet. Performance of the contract is designated to take place in Nibley, indicating the physical location where the unit will be installed, tested, or integrated. Responses to the solicitation are due by July 29, 2026, at 10:30 PM Eastern Time, providing potential vendors approximately one month to prepare technical and commercial proposals. The absence of a set-aside designation means the contract is open to all eligible suppliers without restrictions based on business size or certification status. While no specific point of contact is listed, all inquiries and submissions must be processed through the official SAM.gov portal linked in the documentation. This contract represents a targeted procurement to maintain operational readiness and is likely part of a broader sustainment effort for legacy F-5 airframes still in active or support service.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Brake Caliper SupplyThe contract is for the supply of four brake calipers specifically designed for the F-5 aircraft landing systems under a subcontract arrangement. The opportunity was posted on June 30, 2026, with a firm deadline for responses set for July 29, 2026, at 10:30 PM. The North American Industry Classification System code 336320 indicates the work falls under aerospace product and parts manufacturing. Performance of the contract is tied to Nibley, though no additional location details are provided. The contracting agency is identified as FA8220 Aflcmc Wndt operating under the Department of Defense, reflecting military procurement context. No set-aside provisions or point of contact information are specified, and the solicitation number is absent, suggesting this may be an internal or non-publicly advertised subcontract opportunity. The full details can be accessed via the provided SAM.gov link.

Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

DEADLINE

Gyroscope SupplyThe contract specifies the supply of two gyroscopes for integration into the navigation and flight control systems of F-5 aircraft, under a subcontract arrangement. Performance is required at NIBLEY, with all deliverables expected to meet the technical standards necessary for military aviation operations. The North American Industry Classification System code 334511 indicates the work falls under the manufacturing of instruments and related products for navigation and control systems. The opportunity was posted on June 30, 2026, with a firm deadline for responses set for July 29, 2026, at 10:30 PM. The contracting entity is the Department of Defense, specifically through the FA8220 Aflcmc Wndt office, indicating this is a defense-related procurement aimed at sustaining the operational readiness of legacy aircraft platforms. All submission and compliance requirements must be addressed through the official SAM.gov portal prior to the stated deadline.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Generator SupplyThe contract involves the supply of two generators specifically designated for use on F-5 fighter aircraft, with all units required to meet either original equipment manufacturer specifications or approved aftermarket standards to ensure compatibility and performance. The work falls under NAICS code 335311, indicating it pertains to the manufacturing of electric lighting and wiring equipment, and is structured as a subcontract within the broader defense procurement framework. The contract is managed by the Department of Defense under the agency name FA8220 Aflcmc Wndt, and the performance location is tied to NIBLEY, though no further address details are provided. The solicitation was posted on June 30, 2026, with a firm response deadline of July 29, 2026, at 10:30 PM Eastern Time, allowing potential suppliers a one-month window to submit proposals. There is no stated set-aside designation, suggesting the opportunity is open to all eligible subcontractors without specific socioeconomic preferences. The contract is accessible via a SAM.gov link, which serves as the official platform for submission and tracking, but no point of contact information is included, implying inquiries should be directed through the SAM.gov portal or general agency communication channels.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE