Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on August 31, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

LENS MEASURING INSTRUM

Closed
SPE2DS-26-T-379LFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336611
New
SLED
F&W, 2018 Munson Packman Boat Repower project
Solicitation # 2018 Munson Packman Boat Repower
The Confederated Tribes of the Colville Reservation Fish and Wildlife Department is seeking a factory-certified marine contractor to perform a complete propulsion repower and helm system integration for a 30 foot Munson Packman landing craft. The project involves a six-phase process including the decommissioning and removal of two existing Honda BF250A outboard engines, a structural assessment of the transom, and the installation of two new Honda BF250D Drive-by-Wire outboards. Key technical requirements include the installation of new-generation Honda iST electronic control heads at primary and secondary helm stations, integration with the existing NMEA 2000 backbone and SeaStar PA1315-2 Power Assist Steering system, and a comprehensive fuel system upgrade using USCG Type A1-15 lines. The project concludes with static diagnostics and a minimum two-hour sea trial to validate performance and safety protocols. The Tribe will deliver the vessel to the contractor's facility, which must provide a secure, fenced yard or indoor shop. Proposals are due by November 13, 2026, and must be submitted in PDF format. Evaluation is based on a 100-point scale with significant preference given to Colville Business Enterprises and other Indian-owned businesses. Award criteria prioritize reliability and effectiveness over the lowest cost. Selected contractors must provide proof of Honda Marine Authorized Dealer status, maintain appropriate liability insurance, and agree to either a 25 percent retainage or a performance bond, with a bond being mandatory for contracts exceeding 100,000 dollars. All payments are subject to the Tribes appropriation process and availability of funds.
Confederated Tribes of the Colville Reservation

POSTED

about 7 hours ago

DEADLINE

in 17 days
NAICS: 336611
New
Federal
TSV4 NARR MESSING AND MODERNIZATION
Solicitation # N0018927QL008
NAVSUP FLT LOG CTR Norfolk is soliciting a firm-fixed-price contract for the development of a drawing package and Bill of Materials (BOM) to support habitability upgrades for the TSV4 Narragansett. The scope of work focuses on the vessel's messing, berthing, stateroom, and sanitary spaces at Joint Expeditionary Base Little Creek-Fort Story in Virginia Beach, Virginia. This effort is strictly limited to assessment and documentation; it specifically excludes any procurement, fabrication, removal, or installation of shipboard components. The project is a total set-aside for small businesses, including service-disabled veteran-owned small businesses, under NAICS code 336611. Key deliverables include a draft drawing package and BOM due 40 calendar days after award, with the final delivery of two electronic files and two full-size paper copies in NAVSEA format due within 61 calendar days. Contractors must adhere to several technical standards, including MIL-STD-2003 for electric plants, MIL-STD-777 for piping, and General Specifications for Overhaul of Surface Ships. A mandatory ship check at Colonna's Shipyard in Norfolk is required for eligibility, and failure to attend will result in disqualification. Award will be based on the best value, evaluating the mandatory ship check on a pass/fail basis and the technical approach on an acceptable/unacceptable basis, with the final selection going to the lowest total evaluated price.
Navsup Flt Logistics Ctr Norfolk

POSTED

about 20 hours ago

DEADLINE

in 8 days

AI Contract Overview

Show more

Solicitation SPE2DS-26-T-379L is a request for quotations issued by the DLA Troop Support Medical Supply Chain for the procurement of two ophthalmic lens measuring instruments, identified by NSN 6540016200727. The required equipment, specifically the LED LM-101 model, must include an ink pad, dust cover, 7mm nose piece, prism compensator, and the associated operator and maintenance manuals. Delivery is required within 20 days after order, with a required delivery date of September 2, 2026. The shipment is FOB Destination, with delivery locations specified for both parcel post and freight shipping in the United Kingdom. The contract mandates strict adherence to technical and quality standards, including Item Unique Identification (IUID) per MIL-STD-130 and DFARS 252.211-7003. Packaging must be commercial and compliant with MIL-STD-2073-1E, utilizing sealed unit containers and suitable exterior shipping containers to prevent damage. Marking must follow Medical Marking Standard No. 1, which supersedes MIL-STD-129. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and compliance with the Buy American Act and Berry Amendment for domestic material restrictions.

General Info

Procure two LED LM-101 lens instruments from Lombart Brothers for RAF Lakenheath.

NAICS

336611 - Ship Building and Repairing

Place of Performance

UNIT 5210 BOX 230, APO, AE, 09461-9997, USA

Set-Aside

NONE

Documents

1

SPE2DS-26-T-379L Request for Quotations

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUSA

Full Description

Show more
LENS MEASURING INSTRUMENT,OPHTHALMIC
LENS MEASURING INSTRUMENT,OPHTHALMIC
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
This item requires Item Unique Identification (IUID) in accordance with the enclosed/referenced IUID technical requirements and MIL-STD-130. DFARS 252.211-7003 clause applies. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
LED LM-101 LENS MEASURING INSTRUMENT
INCLUDES:
INK PAD OPHTHALMIC (P/N L1-10-0002)
DUST COVER (P/N L1-0181)
7MM NOSE PIECE (L1-03-0001)
PRISM COMPENSATOR (L1-02-000C)
OPERATOR MANUAL & MAINTENANCE MANUAL
UNIT OF ISSUE EA(EACH)
PRESERVATION, PACKAGING AND PACKING SHALL
BE MARKED IN ACCORDANCE WITH COMMERCIAL PRACTICE.
SHALL BE TO A DEGREE OF PROTECTION TO PRECLUDE
DAMAGE TO CONTAINERS AND/OR CONTENTS THEREOF
UNDER NORMAL SHIPPING CONDITIONS, HANDLING AND ETC.
EACH UNIT OF ISSUE SHALL BE SUPPLIED IN A
SUITABLE SEALED COMMERCIAL CONTAINER.
LABELING AND MARKING SHALL BE MARKED AS SPECIFIED IN
MEDICAL MARKING STANDARD NO. 1A.
This item requires Item Unique Identification (IUID) in accordance with the enclosed/referenced IUID technical requirements and MIL-STD-130. DFARS 252.211-7003 clause applies. APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
SPE2DS-26-T-379L
SECTION B
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO contact@example.gov. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
LOMBART BROTHERS, INC 63381 P/N LM0MA101
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018101879 0001 EA 2.000
NSN/MATERIAL:6540016200727
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:Z PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
************************************************
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
SPE2DS-26-T-379L
SECTION B
PR: 7018101879 PRLI: 0001 CONT’D
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO contact@example.gov. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
*********************************************
PARCEL POST ADDRESS:
HT1083
48TH MDSS SGSM PB
UNIT 5210 BOX 230
APO AE 09461-9997
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
HT1083
48TH MDSS SGSM PB
CP 011 44 +1 (555) 000-0000
BOSTON DR RAF LAKENHEATH BLDG 930
BRANDON SUFFOLK IP27 9PN
GB
M/F: (TCN) HT108362394590
RDD:
PROJ: TP 3
SUPP ADD: HT1081 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A41 DIST: ADV: 2A FC: J6
Need Ship Date:00/00/0000 Original Required Delivery Date:09/02/2026
SPE2DS-26-T-379L NSN/Part Number: 6540-01-620-0727 Quantity: 2 EA Purchase Request: 7018101879QTY: 2 Delivery: 20 days ADO

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339112
New
DIBBS
MASK, ORONASAL
Solicitation # SPE2DS-27-T-1019
Solicitation SPE2DS-27-T-1019 is a request for quotations from the Department of Defense, specifically the Medical Supply Chain MD Surg FSF, for the procurement of universal size oronasal masks under NSN 6515-01-276-1417. The required items feature a head strap coupling and a pre-inflate cushion to prevent mouth-to-mouth contact during resuscitation and must be provided in a pocket-size case with illustrated instructions. The procurement consists of two line items, each for a quantity of one unit, with delivery required within 20 days after receipt of order. Delivery is set as FOB Destination, with shipping addresses including the USNS Burlington T-EPF 10 and NAVSUP FLC North New London. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951, MIL-STD-129 for marking and labeling, and RP001 for palletization, with the DLA Master List of Technical and Quality Requirements taking precedence. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment. Additionally, the award is subject to various federal and defense regulations, including the Buy American Act, the Berry Amendment, and specific cybersecurity reporting requirements under DFARS 252.204-7012. All quotes must be submitted through the DLA Internet Bid Board System.
Surgical and Medical Instrument Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 456199
New
DIBBS
CLAMP, HEMORRHAGE CONTR
Solicitation # SPE2DS-27-T-1018
Solicitation SPE2DS-27-T-1018 is a small business set-aside request for quotations issued by the DLA Troop Support Medical Supply Chain for the procurement of hemorrhage control clamps, identified by NSN 6515-01-629-7044. The required item is a sterile, combat-ready wound closure device constructed from medical grade polycarbonate plastic and stainless steel, designed for rapid control of severe bleeding via self or buddy application. Design control for the device is held by Innovative Trauma Care in San Antonio, Texas. The procurement specifies a non-extendable shelf life of 48 months and requires delivery within 20 days after receipt of order, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA and military standards, including MIL-STD-129 for marking and labeling, the Medical Marking Standard No. 1, and ASTM D3951 for packaging. Palletization must comply with RP001 requirements. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. Compliance with various Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses is required, specifically regarding the Buy American Act, safeguarding covered defense information, and prohibitions on certain telecommunications equipment. Offerors are encouraged to provide quantity ranges in their quotes to accommodate demand volatility.
All Other Health and Personal Care Retailers

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS