Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Level I Special Emphasis Material Testing Services

Active

Federal

Response Deadline11/13/2026, 09:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Level I Special Emphasis Material Testing Services supports prime contractors on projects for the Department of Defense agency Navsup Weapon Systems Support. The scope of work involves performing quantitative and non-destructive testing, including chemical analysis of ASTM-A193 Grade B16 alloy, mechanical analysis, wedge tensile testing, and Liquid Penetrant or Magnetic Particle inspections. To ensure compliance with Special Emphasis standards, the contractor will utilize spectrometers and tensile testing machines to produce certified test reports and inspection certificates. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 13, 2026.

General Info

Material testing subcontract for Navsup Weapon Systems Support, deadline November 13, 2026.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

541380 - Testing Laboratories and Services

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0010426QFB30.

The full solicitation package (5 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SCREW,CAP,HEXAGON H

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 09:30:00 PM UTCin 9 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs quantitative and non-destructive testing (NDT) for prime contractors on NAVSUP Weapon Systems Support projects. Conducts chemical analysis of ASTM-A193 Grade B16 alloy, mechanical analysis, wedge tensile testing, and Liquid Penetrant (LPI) or Magnetic Particle (MPI) inspections. Utilizes spectrometers and tensile testing machines to meet Special Emphasis (Level I) standards. Delivers certified test reports and inspection certificates.

Similar Contracts

Same NAICS industry code

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a fee-for-service subcontract to conduct a respirable crystalline silica exposure assessment at the Edison Job Corps Center in Edison, New Jersey. The project focuses on the Brick Trade training program, requiring a qualified industrial hygiene consultant to evaluate potential exposures for 27 students and instructors during activities such as masonry, grinding, and sand handling. The scope of work includes performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA action levels of 25 µg/m³ and permissible exposure limits of 50 µg/m³. Deliverables consist of a written report, laboratory results, exposure calculations, and a prioritized corrective action plan for dust control. Bids must be submitted via email to Wendy Lawrence by 3:00 PM EST on November 6, 2026. A complete proposal must include a bid sheet, a completed supplier packet with a W-9 and self-certification form, proof of insurance, and three references for similar projects. Evaluation is based on best value, focusing on the consultant's qualifications, technical sampling approach, and estimated schedule. The contract mandates compliance with Service Contract Labor Standards (WD#2015-4193 Rev 32) and various FAR regulations, including small business utilization and the protection of government interests for subcontracts exceeding $45,000. Award opportunities are open to various SBA-certified small business categories, including VOSB, SDVOSB, WOSB, and HUBZone.

Edison Job Corps

POSTED

about 1 hour ago

DEADLINE

Production Lot Testing and Quality ValidationThis subcontract for the Department of Defense DLA Weapons Support Fluid Handling Division involves performing production lot testing and quality validation for CUNI pipe flanges. The selected contractor will coordinate random sample selection with the Government QAR and execute tests according to the Technical Data Package to ensure quality conformance. Key deliverables include the preparation of DD Form 1222 and detailed certified test reports. The project is based in New Cumberland and falls under NAICS code 541380. Due to the handling of export-controlled technical data, the contractor must maintain CMMC Level 2 and JCP certifications. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

Production Lot Test (PLT) ServicesThis subcontract for Production Lot Test services supports prime contractors under the DLA Weapons Support Aviation Supply Chain. The primary objective is to execute contractor testing in accordance with procurement note E03 to ensure that aviation-grade shear bolts comply with all required technical and material standards. The scope of work involves utilizing specialized laboratory equipment for material verification and culminates in the delivery of a formal Production Lot Test approval and certification report. The project is managed under NAICS code 541380 for the Department of Defense, with the place of performance located in Cherry Point. Interested parties should note the solicitation timeline, which includes a posted date of November 4, 2026, and a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

First Article and Production Lot Testing (FAT/PLT)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves providing specialized verification testing for prime contractors on Navy aviation and ship projects. The scope of work includes conducting First Article Testing for process validation, Production Lot Testing for batch sampling, and Product Verification Testing as requested by the Contracting Officer. All operations must utilize NDI tools and stress-testing rigs that comply with DoD safety standards to deliver certified test reports and pass results. The opportunity is categorized under NAICS code 541380 and was posted on November 4, 2026. Interested parties must submit their responses by the deadline of December 4, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Infrastructure Inspection and Watertightness TestingThis subcontract for the City of Richmond Hill involves providing physical inspections and watertightness testing for wastewater infrastructure projects. The selected contractor will support prime contractors by assessing the condition of manhole frames, covers, pump station wet wells, valve vaults, and impellers. These evaluations must be conducted using specialized vacuum testing equipment and inspection cameras, with all work performed by certified inspectors specializing in wastewater and concrete. The primary deliverables for this engagement include detailed condition assessment reports and formal watertightness test results. Interested parties should note that the response deadline is December 3, 2026, and the project falls under NAICS code 541380.

City of Richmond Hill

POSTED

about 5 hours ago

DEADLINE

Field Performance Testing and CertificationThe Palos Verdes Peninsula Unified School District is seeking a subcontractor for Field Performance Testing and Certification for intermediate school projects located in Palos Verdes Estates. The selected provider will perform independent safety testing for prime contractors, specifically focusing on G-Max rating and shock attenuation testing. All work must be conducted using certified G-Max testing equipment in accordance with ASTM F1936 standards to verify the impact attenuation of finished synthetic surfaces. The contractor is responsible for delivering certified test reports and all necessary compliance documentation directly to the District. This opportunity is categorized under NAICS code 541380, with a response deadline set for November 18, 2026.

Palos Verdes Peninsula Unified School District

POSTED

about 6 hours ago

DEADLINE

SFCC Functional Testing and Certification ServicesThe SFCC Functional Testing and Certification Services subcontract involves providing comprehensive inspection and performance testing for prime contractors on U.S. Navy SFCC projects. The scope of work requires the verification of form, fit, and function for Circuit Card Assemblies to ensure they meet strict system performance specifications. Additionally, the contractor is responsible for conducting traceability audits and producing precise material certification documents in accordance with SFCC protocols and DoDI 5230.24. Managed under the Department of Defense through the Navsup Weapon Systems Support Mech, this engagement focuses on the delivery of signed certification reports and detailed inspection results for 16 specific units. The project falls under NAICS code 541380, with a response deadline set for December 4, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Quality Assurance, Inspection, and Testing for F100 ComponentsThis subcontract involves providing quality assurance, inspection, and testing services for F100 components to support prime contractors delivering DLA supply contracts for the Department of Defense. The selected provider will perform independent dimensional inspections, material testing, and final quality assurance in strict accordance with the Engineering Data List and Qualification Requirements. Technical execution requires the use of non-destructive testing equipment and Coordinate Measuring Machines to ensure all certified components and inspection reports meet rigorous standards. To be eligible for this engagement, the contractor must maintain AS9100 certification. The project is categorized under NAICS code 541380 and is managed by the DLA Aviation office in Oklahoma City. Interested parties must submit their responses by November 12, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

about 6 hours ago

DEADLINE

Critical Safety Item (CSI) Testing and Certification ServicesThis subcontract for Critical Safety Item Testing and Certification Services supports the DLA Weapons Support Maritime Supply Chain by providing specialized testing, inspection, and validation for prime contractors. The scope of work includes conducting First Article Testing, source inspections, and ensuring precise marking and labeling in accordance with MIL-STD-129 and MIL-STD-130N(1) standards. These tasks are performed using high-precision metrology equipment and CMM to deliver certified inspection certificates and test reports. To qualify for this engagement, providers must maintain CMMC Level 2 compliance and hold either ISO 9001 or AS9100 certification. The opportunity is categorized under NAICS code 541380 and is managed through the Department of Defense. Interested parties must adhere to the response deadline of November 18, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

Third-Party Quality Inspection and CertificationThis subcontract for Third-Party Quality Inspection and Certification supports the Department of Defense through Navsup Weapon Systems Support Mech. The selected provider will perform independent quality audits and inspections for prime contractors, focusing on Government Source Inspections and the verification of physical identification according to MIL-STD-129. Key responsibilities include validating ISO 9001 compliance and ensuring mercury-free certifications through the use of precision measurement and mercury detection equipment. The contractor is required to deliver detailed inspection reports and certifications of compliance to ensure all project standards are met. This opportunity falls under NAICS code 541380, with a response deadline set for November 30, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

Environmental Laboratory Analysis (Lead & Asbestos)This subcontract for the City of Bell involves providing comprehensive analytical laboratory testing for lead, asbestos, and mold samples on environmental projects. The scope of work includes performing PCM, PLM, and TEM for asbestos, AAS for paint chip and dust lead, and spore trap and fungal direct examinations for mold. The selected provider is responsible for delivering all laboratory analysis results and completed Chain of Custody forms to the prime contractors. To qualify, the laboratory must maintain several critical certifications, including EPA ELLAP, EPA NLLAP, NVLAP, and AIHA, and must participate in the ELPAT Program. The project is categorized under NAICS code 541380 and will be performed in Bell, California. Responses for this opportunity are due by November 17, 2026.

POSTED

about 8 hours ago

DEADLINE

Construction Quality Control TestingThis subcontract for Construction Quality Control Testing involves providing material testing and inspection services for prime contractors working on Maine Department of Transportation bridge projects statewide. The scope of work includes performing concrete slump tests, cylinder compression tests, and coating thickness measurements to ensure structural integrity and compliance. The selected provider must utilize certified testing personnel and is responsible for delivering detailed inspection reports and material certifications. This opportunity was posted on November 4, 2026, with a response deadline of November 25, 2026, falling under NAICS code 541380.

Maine Department of Transportation

POSTED

about 13 hours ago

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

OEM Electronic Component Parts SupplierThis subcontract opportunity is for an OEM Electronic Component Parts Supplier to provide original manufacturer parts and sub-assemblies to prime contractors supporting NAVSUP Weapon Systems Support projects. The primary objective is to facilitate the repair of NIIN 015577217 through the delivery of genuine OEM replacement components. To ensure quality and safety, the supplier must provide certification of authenticity and Material Safety Data Sheets that comply with OSHA and FED STD 313 standards. Eligible candidates must hold authorized distributor status and demonstrate full compliance with the Buy American and Trade Agreements acts. This Department of Defense requirement falls under NAICS code 423830. Interested parties must submit their responses by the deadline of November 24, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

Electronic Component Repair and Modification ServicesThis subcontract for Electronic Component Repair and Modification Services involves the teardown, evaluation, repair, and modification of electronic components, specifically NIIN 015577217, for prime contractors supporting NAVSUP Weapon Systems Support projects. The scope of work includes disassembling components to identify failures, executing repairs according to technical orders and drawings, and conducting testing to ensure OEM specifications are met. The contractor must possess the necessary testing equipment for the specified NIIN and maintain CMMC certification. All repaired components must be identified in accordance with MIL-STD-130 and packaged according to MIL-STD-2073-1. This Department of Defense opportunity falls under NAICS code 811219, with a response deadline of November 24, 2026.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 6 hours ago

DEADLINE

Manufacturing of SFCC Circuit Card AssembliesThis subcontract with the Department of Defense, specifically Navsup Weapon Systems Support Mech, involves the manufacturing and delivery of 16 certified Circuit Card Assemblies (NSN 5998-01-533-4858) for U.S. Navy shipboard system projects. The contractor is required to fabricate the cards according to TDP Version 010 and SFCC/Fly-By-Wire standards, ensuring all units meet strict SFCC certification and 100% traceability marking requirements. Operational compliance includes the implementation of SMIC codes on wrapping and adherence to MIL-STD-2073 and SPI 03950 10167 packaging standards. Due to the nature of the project, the contractor must be eligible to handle export-controlled technical data. The solicitation was posted on November 4, 2026, with a response deadline of December 4, 2026, under NAICS code 334418.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Supply of Specialized Nuts (NSN 5310-01-732-5082)This subcontract involves the manufacture or procurement of 256 specialized nuts for prime contractors supporting US Navy NAVSUP projects. The components must strictly adhere to NSN 5310-01-732-5082 and TDP Version 001 specifications, with a specific requirement that no mercury-containing compounds are added during production. The contractor is responsible for packaging the units according to MIL-STD-2073 and providing a Certificate of Conformance in compliance with FAR 52.246-15. All certified and packaged materials are to be delivered to designated Navy locations. This opportunity is managed under NAICS code 332722 for the Navsup Weapon Systems Support Mech within the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in about 1 month

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports prime contractors on projects for the Department of Defense agency Navsup Weapon Systems Support Mech. The scope of work involves providing specialized military-grade packaging, marking, and palletization to ensure all deliverables are shipping-ready. All activities must strictly adhere to established military standards, specifically MIL-STD-2073 for packaging, MIL-STD-147 for unit load palletization, and MIL-STD-130 for markings. Additionally, the contractor is responsible for implementing electrostatic discharge packaging in accordance with ANSI/ESD S20.20 using approved anti-static materials. This opportunity falls under NAICS code 488510 and was posted on November 4, 2026, with a response deadline of December 3, 2026.

Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

OEM Manufacture of Inertial Measuring Units (NSN 6605-01-495-0012)This subcontract involves the OEM manufacture of Inertial Measuring Units, specifically NSN 6605-01-495-0012, for prime contractors supporting NAVSUP Weapon Systems Support projects under the Department of Defense. The manufacturer is required to produce hardware according to TDP Version O09 and design Cage Code 03956, reference 4300859, ensuring all units are marked in accordance with MIL-STD-130, REV N. Production must take place within ESD control facilities that comply with ANSI/ESD S20.20 and ISO 9001 quality systems. The contract falls under NAICS code 334511, with a response deadline set for December 3, 2026. The final deliverable consists of completed Inertial Measuring units meeting all specified technical and quality standards.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

Precision Components for Cylinder Assembly (NIIN 011107355)This subcontract involves the provision of high-tolerance metal components, specialized seals, and raw materials for cylinder assemblies under NIIN 011107355. Supporting prime contractors for the Department of Defense via the Navsup Weapon Systems Support Mech, the supplier must ensure all precision-machined sub-components strictly adhere to Technical Data Package specifications. The agreement mandates strict compliance with DFARS 252.225-7036 Buy American requirements and requires the submission of Material Safety Data Sheets per OSHA and FED STD 313 for any hazardous materials. The procurement process is categorized under NAICS code 334419, with a response deadline set for December 4, 2026.

Other Electronic Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Cylinder Assembly (NIIN 011107355) Fabrication and RepairThis subcontract involves the manufacture or refurbishment of one Cylinder Assembly (NIIN 011107355) for prime contractors supporting US Navy NAVSUP Weapon Systems Support projects. The scope of work includes the teardown, evaluation, and modification of the assembly in strict accordance with Technical Data Package Version 001, utilizing precision machining and cleaning equipment specialized for aerospace and naval components. The final deliverable is one new or refurbished assembly equipped with an Item Unique Identification. Compliance requirements for this project include authorized access to classified documents as specified by DD Form 254 and adherence to OSHA and FED STD 313 standards for Material Safety Data Sheets. The opportunity is categorized under NAICS code 333242 and is managed by the Department of Defense. Interested parties must respond by December 4, 2026.

Semiconductor Machinery Manufacturing

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Supply of Mercury-Free Bonding Materials and ElastomersThis subcontract involves the supply of mercury-free bonding materials and elastomers for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The scope of work requires the delivery of high-grade mercury-free epoxy, vulcanizing agents, and vibration damping materials. To ensure compliance and safety, the provider must supply all necessary Material Safety Data Sheets and hazard warning labels to certify that the chemical agents and raw materials are mercury-free. The opportunity is categorized under NAICS code 325211 and was posted on November 4, 2026. Interested parties must submit their responses by the deadline of December 4, 2026, at 8:30 PM. This contract focuses on the procurement of certified chemical agents essential for specialized defense mechanical projects.

Plastics Material and Resin Manufacturing

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Vulcanization and Epoxy Bonding ServicesThis subcontract for Vulcanization and Epoxy Bonding Services supports prime contractors on Navsup Weapon Systems Support Mech projects within the Department of Defense. The scope of work involves performing chemical bonding and curing, specifically executing vulcanization, epoxy bonding, gap filling, and vibration damping applications using specialized epoxy systems and vulcanizing presses. The final deliverable for this engagement is the completed bonded and cured Mounting Plate assembly. To ensure quality and compliance, the contractor must conduct hardness and tensile testing in accordance with MIL-PRF-81733. The contract further mandates strict adherence to process qualification and First Article Testing requirements. Interested parties should note the response deadline of December 4, 2026, for this opportunity categorized under NAICS code 339999.

All Other Miscellaneous Manufacturing

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Precision Machining of Mounting Plate ComponentsThis subcontract involves the precision machining of mounting plate components, specifically fabricating metal bases and structural components for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The scope of work requires the use of CNC milling and turning equipment to produce parts according to specific technical drawings, including 497A10012, 497A10104, 497A63201, 497A73300, and 497A73301. All deliverables must strictly adhere to TDP Version 006 dimensional tolerances and ISO 9001 quality systems. The contractor is required to use mercury-free materials to ensure the machined metal components are delivered ready for bonding. This effort falls under NAICS code 332710, with a response deadline set for December 4, 2026.

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Earlier notices in this NAICS code

Posted before this notice, open and closed

NGS Sequencing and Library Preparation Services

Ofc Of Acquisition Grants-Denver

POSTED

CLOSED

Proof Load Testing and Certification Services

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

Electronic Testing and Quality Assurance Services

Ok DLA Aviation At Oklahoma City

POSTED

CLOSED

First Article Testing and Quality Assurance Services

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Potable Water Laboratory Testing and Analysis

National Park Service Contracting Activity

POSTED

CLOSED

Materials Testing and Quality Control

6982AF Central Federal Lands Divisi

POSTED

DEADLINE

Aviation Electronics Testing and Quality Assurance

Ok DLA Aviation At Oklahoma City

POSTED

CLOSED

NDT Inspection Services for Valve Assemblies

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

First Article Testing (FAT) and Reporting

POSTED

DEADLINE

Turbine Component Inspection and Testing Services

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Third-Party Inspection and Testing for Naval Vent Assemblies

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Insulated Hot Line Tool Testing and Certification

DLA Distribution

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS