Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

LEVER, BREECHBLOCK, COCK

Active
SPE7L4-26-T-5985Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the procurement of 17 units of a lever, breechblock, cocking component designated by NSN 1005-13-116-2146 under solicitation SPE7L4-26-T-5985, with a delivery deadline of 145 days after contract award. This item is classified as a defense article subject to the International Traffic in Arms Regulations and the Arms Export Control Act, requiring all manufacturers and exporters to be registered with the Directorate of Defense Trade Controls; failure to provide proof of registration renders any offer ineligible. The technical data associated with this component is export-controlled under either ITAR or EAR, with strict limitations on dissemination to foreign persons or entities, even within the United States. Only contractors with approved U.S./Canada Joint Certification Program status, completion of mandatory DOD export control training, and explicit DLA authorization may access the technical data. Additionally, the item falls under demilitarization requirements for Category I munitions, and the use of Class I ozone-depleting chemicals is strictly prohibited. Packaging must comply with DLA procurement standards, and government identification must be removed from any non-accepted supplies. The solicitation was issued on August 4, 2026, with responses due by August 17, 2026, and performance is designated for Cherry Point, North Carolina, under the oversight of the Department of Defense’s Combat Vehicles and Armament division.

General Info

Procurement of 17 defense-grade levers under ITAR, with strict export controls, registration, and demilitarization requirements.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

488190 - Other Support Activities for Air TransportationView NAICS

Place of Performance

PHANTOM RD BLDG 147 BAY A, CHERRY POINT, NC, 28533-5040, US

Set-Aside

NONE

Documents

(1)

SPE7L4-26-T-5985.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
View Agency Profile
Office AddressUS
Contacts
PAULA CHAPMAN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
LEVER,BREECHBLOCK,COCKING
LEVER,BREECHBLOCK,COCKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN
AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS
REGULATIONS (22 C.F.R. 120-30) AND THE ARMS EXPORT
CONTROL ACT (22 U.S.C.A. 2778-2799). ANY
MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES IS
REQUIRED TO REGISTER WITH THE DIRECTORATE OF DEFENSE
TRADE CONTROLS (DDTC), DEPARTMENT OF STATE.
DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED
PRIOR TO AWARD. ADDITIONAL EXPORT RESTRICTIONS
APPLY AS INDICATED HEREIN. FAILURE TO SUBMIT DDTC
REGISTRATION WHEN REQUESTED WILL MAKE A QUOTE/OFFER
INELIGIBLE FOR AWARD.
RD001: DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES
(CATEGORY I MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
SPE7L4-26-T-5985
SECTION B
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1005-13-116-2146 Quantity: 17 EA Purchase Request: 7017529313QTY: 17 Delivery: 145 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 488190
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-12PD
This contract pertains to the procurement of PIN-RIVET items identified by NSN 5320-01-623-5442 and part number HLT50YB-12-18 or ST3M759C6-18, with a total quantity of 23 units at a unit price of $23.00, resulting in a total contract value of $529.00. The items must be manufactured or sourced from approved vendors including SPS Technologies LLC, Huck International Inc, West Coast Aerospace Inc, Hi-Shear Corporation, Heartland Precision Fasteners Inc, Fastener Innovation Technology Inc, and The Boeing Company, all of which are listed with their respective DOD vendor identifiers. Manufacturing may require casting or forging processes, and if the contractor lacks the necessary tooling or technical expertise, they must submit a Casting and Forging Assistance Request to the Defense Logistics Agency. Compliance with MIL-STD-130N for identification marking of U.S. military property is mandatory, and all items must be physically marked in accordance with RQ017 requirements. Inspection and acceptance occur at the origin, with sampling governed by MIL-STD-1916 or equivalent zero-based sampling plans, and all attributes must be verified using strict AQL standards: critical at 0.1, major at 1.0, minor at 4.0. Packaging must adhere to ASTM D3951 as supplemented by DLA’s Master List of Technical and Quality Requirements and MIL-STD-129 for labeling, with palletization following RP001 guidelines. Delivery is FOB origin, with a required delivery date of March 13, 2027, and a need ship date of January 31, 2027, under a 171-day performance window. The contract mandates zero variance in quantity and requires all documentation and labeling to reflect the DLA unit of issue and purchase unit as defined in official DLA resources. Final delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
DUCT, EXHAUST, AIRCRA
Solicitation # SPE4A5-26-T-323S
This contract issued by the Defense Logistics Agency for a duct, exhaust, aircraft component with NSN 2840-01-499-0448 and part number 5116T08P02 specifies the procurement of exactly eight units under procurement request 7017739863, with delivery due in 171 days FOB origin and no variance allowed in quantity. The item must comply with stringent military standards including MIL-STD-130 for Item Unique Identification, MIL-STD-129 for marking, and MIL-STD-2073-1E for packaging, with specific preservation methods, container types, and palletization following DLA’s procurement requirements. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, and the item is subject to DFARS 252.211-7003 for covered defense information. Inspection and acceptance occur at origin using zero-defect sampling based on MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels or AQLs as defined. The delivered item must be shipped to DLA Distribution Jacksonville at the specified address with a required ship date of January 31, 2027, and original delivery deadline of April 16, 2028. The contract is governed by the DLA Master List of Technical and Quality Requirements applicable as of the solicitation issue date, and documentation for source approval is required.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
SLEEVE, EXPANSION MA
Solicitation # SPE8E5-26-T-3767
The contract is for 1,023 expansion sleeves, part number FTS-4-0-3-8, identified by NSN 3460-01-498-6519, under solicitation SPE8E5-26-T-3767. Delivery is required within 153 days of award, with shipment FOB origin and inspection and acceptance occurring at the destination. The quantity is fixed with zero variance allowed, and the unit price is based on a single unit of issue. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede any other standards such as ASTM D3951. Packaging must meet MIL-STD-129 labeling and storage requirements, and palletization must follow DLA Packaging Requirements for Procurement. The delivery destination is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation logistics are governed by DLAD procedural notes C19 and C20. The item is subject to Covered Defense Information requirements, and any non-accepted supplies must have government identification removed. The contract stipulates documentation for source approval and adherence to specific procurement protocols. The original required delivery date is March 6, 2027, with a need ship date of January 18, 2027, indicating the timeline for fulfillment under the DLA contracting framework.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 488190
New
DIBBS
CAP, FILTER
Solicitation # SPEFA3-26-T-0336
This contract pertains to the procurement of a CAP, FILTER with the NSN 1650-LL-FFX-F347 and Parker Hannifin Corporation part number 3831355-101, quantity of 10 units, to be delivered FOB destination within 84 days of contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with revision control based on the solicitation or award date depending on acquisition type. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, using zero acceptance criteria unless otherwise specified, with attributes classified as critical, major, or minor assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application with no shelf life requirement. Packaging must conform to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization following DLA Packaging Requirements. Unit of issue is each, with no variance allowed in quantity. Inspection and acceptance occur at the destination. The delivery address is the DLA Distribution Jacksonville facility, with parcel post addressed to the Fleet Readiness Center Southeast. The contract is issued under solicitation SPEFA3-26-T-0336 with a required delivery date of August 4, 2026, and a response deadline of August 12, 2026.
DLA FLEET READINESS CENTER SOUTHEAST

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-11ZV
The contract pertains to the procurement of 3 retaining rings with NSN 5325-01-517-3749 and part number M10HS155 from HEIL TRAILER INTERNATIONAL LLC, under solicitation SPE4A6-26-T-11ZV. Delivery is required FOB origin with zero variance in quantity, and inspection and acceptance occur at the destination. The item must be packaged in compliance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including mandatory marking and labeling per MIL-STD-129 and palletization per RP001. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. The required delivery date is January 18, 2027, with an allowed delivery order of 171 days, and the ship date must occur no later than January 31, 2027. The delivery location is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation must comply with DLAD Proc Note C19 and C20. The unit of issue is each, priced at $3.00 per unit, with total contract value of $9.00. All technical and quality provisions referenced via R or I numbers are governed by the DLA Master List, with revision control tied to the solicitation or award date depending on acquisition size.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
SET SCREW
Solicitation # SPEFA5-26-T-0974
This contract pertains to a single set screw with NSN 5305-LN-003-5502, procured by the Defense Logistics Agency under solicitation SPEFA5-26-T-0974, with a required delivery within five days of contract award. The item is designated as a critical application item for Hydro-Aire Aerospace Corp, part number 83691, and must comply strictly with MIL-STD-130N for identification marking of U.S. military property, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based sampling plan. Unless otherwise specified, all attributes not explicitly categorized are treated as major, and acceptance criteria demand zero non-conformances in the sampled lot. Packaging must adhere to ASTM D3951 but is subordinate to all DLA Master List of Technical and Quality Requirements, and labeling must conform to MIL-STD-129 with unit pack details as specified. Palletization follows DLA packaging guidelines, and the item has no shelf life restriction. The delivery is FOB destination, with inspection and acceptance occurring at the destination, and zero variance in quantity is permitted. The item must be shipped by the fastest traceable means, with parcel post strictly prohibited; freight must be sent to the specified address at Cherry Point, NC, using the provided freight and contact details. The required delivery date is August 6, 2026, and the contract includes mandatory government-only use identifiers for tracking and processing. The unit of issue is each (EA), with a total quantity of one and a unit price of $1.00, and the procurement is subject to all applicable technical, quality, and packaging standards listed in the DLA Master List, which override any conflicting commercial standards.
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
3851718-101 PIN ( LLFF
Solicitation # SPEFA3-26-T-0335
The contract pertains to the procurement of two units of part number 3851718-101 PIN with NSN 5315-LL-FFX-F362, designated as a critical application item manufactured by Parker Hannifin Corporation. Delivery is required within five days of award, with FOB destination terms and zero variance allowed in quantity. Inspection and acceptance both occur at the delivery point. Packaging must comply with ASTM D3951 but is subordinate to the DLA Master List of Technical and Quality Requirements, which govern all technical and quality specifications. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow DLA’s RP001 requirements. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, with attributes classified as VII, IV, and II for critical, major, and minor respectively. Unit of issue is each, and the item must be shipped by the fastest traceable means; parcel post is explicitly prohibited. The delivery address is the Fleet Readiness Center Southeast in Jacksonville, Florida, with freight and parcel post addresses provided. The original required delivery date is August 6, 2026, and the solicitation number is SPEFA3-26-T-0335, issued by the Defense Logistics Agency under a federal procurement vehicle.
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
CUSHION
Solicitation # SPEFA5-26-T-0975
The contract specifies the procurement of 25 units of a cushion identified by NSN 5330-LN-002-7833 and part number SPD65E-1701-055, with a total contract value of $25.00 per unit delivered FOB destination within 48 days of award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over any other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and must follow DLA Packaging Requirements for Procurement (RP001) and be palletized accordingly, while the material itself has no shelf life restriction. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated; critical attributes must be verified at Level VII or AQL 0.1, major at Level IV or AQL 1.0, and minor at Level II or AQL 4.0. Inspection and acceptance occur at the destination, with no允许 variance in quantity. Delivery must be sent to the specified freight address at Cherry Point, North Carolina, with a required delivery date of August 4, 2026, and must be prepared for shipment in accordance with the defined unit of issue and packaging protocols.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
SUPPORT, CANOPY, ROCKE
Solicitation # SPEFA3-26-T-0297
DLA RECEIVING OFFICER NAVAL BASE CORONADO BLDG

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 488190
New
DIBBS
VALVE, AIRCRAFT, MATE
Solicitation # SPE4A5-26-T-324D
The item is a valve for aircraft mating applications, identified by NSN 1680-01-524-1537, with a quantity of 11 units required under solicitation SPE4A5-26-T-324D, which is a total small business set-aside under NAICS code 488190. The contract requires strict compliance with limited rights data that must govern manufacturing and testing, and only vendors with direct access to this data or verifiable traceability to approved sources may submit quotes. A Source Approval Request (SAR) package is mandatory for companies seeking source approval, and all technical data associated with this item is classified as covered defense information subject to export control under either ITAR or EAR, prohibiting any unauthorized disclosure to foreign persons, including foreign nationals within the U.S. and subsidiaries of U.S. companies. Access to the controlled data is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed required DLA training on handling export-controlled technical data, and have received formal authorization from the DLA. Delivery is due 171 days after contract award, with performance centered in San Diego, California, and inquiries must be directed to Steven Lewis at the designated DLA email.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
CAP
Solicitation # SPEFA5-26-T-0956
This contract, issued under solicitation number SPEFA5-26-T-0956 by the Defense Logistics Agency Fleet Readiness Center, is a simplified acquisition for a single unit of a military component identified by NSN 1560LLNC08714 and part number 205-030-724-047 from Bell Textron Inc. Delivery is required within 50 days, with an original delivery date of October 29, 2026, and is FOB destination with zero tolerance for quantity variance. The Government will inspect and accept the item at the destination address in Cherry Point, North Carolina, using the freight shipping address provided. All packaging must comply with ASTM D3951, but the DLA Master List of Technical and Quality Requirements takes precedence, and palletization must adhere to RP001: DLA Packaging Requirements for Procurement. Marking and labeling must follow MIL-STD-129 for shipment and storage, and unique identification of the item must comply with MIL-STD-130N(1) as mandated for U.S. military property. The material has no shelf life requirement. Quality assurance sampling must follow MIL-STD-1916 or ASQ Z1331, Table 1, or an equivalent zero-based sampling plan, with attributes classified as critical, major, or minor assigned AQLs of 0.1, 1.0, and 4.0 respectively, and corresponding verification levels of VII, IV, and II; unspecified attributes are treated as major. MIL-STD-105/ASQ Z1.4 may be used to determine sample size, but acceptance requires zero non-conformances unless otherwise specified. The contract is anticipated to be awarded as a firm-fixed-price contract under an automated process, likely using a Lowest Price Technically Acceptable methodology. Multiple FAR and DFARS clauses are incorporated, including inspection requirements under 52.246-2, cybersecurity safeguards under 252.204-7012, prohibitions on covered telecommunications equipment under 252.204-7018, trafficking in persons compliance under 52.222-50, and hazardous material handling restrictions under 252.223-7006. Payment must be submitted via WAWF, and compliance with employment eligibility verification, equal opportunity, and
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 488190
New
DIBBS
SKIN
Solicitation # SPEFA3-26-T-0334
This contract pertains to the procurement of two units of a specific component identified by NSN 1560-LN-003-4843 and part number 70203-21101-144, supplied by SIKORSKY AIRCRAFT CORPORATION and JGS PROPERTIES LLC. The item is not subject to shelf life requirements or unique identification marking, as per DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over all other standards. Packaging must comply with ASTM D3951, with mandatory adherence to MIL-STD-129 for marking and labeling, and palletization must follow DLA’s RP001 packaging directives. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs as defined. The delivery is FOB destination, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. The required delivery date is January 31, 2027, with a lead time of 171 days. The unit of issue is each (EA), at a price of $2.00 per unit, totaling $4.00. Deliveries must be sent to the designated freight address in Jacksonville, Florida, and the contract is under solicitation number SPEFA3-26-T-0334, issued by the DLA Fleet Readiness Center Southeast.
DLA FLEET READINESS CENTER SOUTHEAST

POSTED

about 16 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE7L4-26-T-5973
The contract specifies a single unit of a special-purpose electrical cable assembly with NSN 5995-01-623-4267, requiring delivery within five days FOB origin, with no tolerance for quantity variance. The item must meet stringent technical and quality standards defined by the DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and DLA packaging requirements, including palletization per RP001, and all markings must adhere to established military protocols. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or equivalent zero-based plans, enforcing zero non-conformances unless otherwise contracted. The cable assembly is subject to Cybersecurity Maturity Model Certification Level 2 self-assessment, and government identification must be removed from any non-accepted supplies. The delivery address is Holloman Air Force Base, and shipment must use traceable freight methods—parcel post is prohibited. The contract was issued under solicitation SPE7L4-26-T-5973 with an original required delivery date of August 3, 2026, and is managed by the Department of Defense’s Combat Vehicles and Armament office, with Anna-Rachelle Betts as the primary point of contact.
Other Electronic Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336360
New
DIBBS
BOX, ACCESSORIES STO
Solicitation # SPE7L4-26-T-5986
This contract, under solicitation number SPE7L4-26-T-5986, specifies the procurement of one unit of a box and accessories identified by NSN 2540017179419 and part number 24001448, with a unit price of $1.00 and a total price of $1.00. Delivery is required within 20 days FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must fully comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and palletization methods, with no special marking required. Technical and quality requirements referenced through R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item must be delivered to Schaefield Barracks, HI, with the government-provided shipping and marking instructions, and transportation details follow DLAD Proc Notes C19 and C20. The contract is issued under the Department of Defense’s Combat Vehicles and Armament office, with a required delivery date of June 17, 2026, and is linked to a single point of contact at DLA for inquiries.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, VEHICULAR COMP
Solicitation # SPE7L4-26-T-5974
The contract pertains to the procurement of one bracket, vehicular component, identified by NSN 2590-01-559-1306 and part number 6433083-01M1, to be supplied by BAE Systems Land & Armaments L.P. or AMZ Alabama Inc. Delivery is required within five days of award, with shipment FOB origin and no variance in quantity allowed. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 while adhering strictly to DLA Master List of Technical and Quality Requirements, which take precedence over any other standard. Packaging and labeling must follow MIL-STD-129 and RP001, with palletization requirements enforced. The item is prohibited from containing any Class I ozone-depleting chemicals, and any substitute chemicals must be approved unless explicitly authorized by specifications. The delivery destination is in Kaiserslautern, Germany, with the shipment marked for SSA Building 2371 and designated under RDD 999/NMCS procedures. Transportation details reference DLAD PROC NOTE C19 and C20. The contract is tied to solicitation SPE7L4-26-T-5974, with an original required delivery date of August 4, 2026, and all government-specific codes and identifiers are included for administrative and logistical tracking.
Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336211
New
DIBBS
ANGLE, FENDER REINFO
Solicitation # SPE7L4-26-T-5978
The contract pertains to the procurement of an aluminum angle reinforcement component for fender applications, identified by NSN 2510-00-983-6886 and part number 10911305-2, with a quantity of 73 units. The item is subject to strict export control regulations under either ITAR or EAR, meaning any transfer, including disclosure to foreign persons within or outside the United States, requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and access to the associated technical data is restricted exclusively to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DLA training on handling export-controlled data, and have received formal approval from the DLA controlling authority. The purchase request number is 7016286376, with a delivery timeline of 219 days after contract award. The solicitation, issued under contract number SPE7L4-26-T-5978, was posted on August 4, 2026, with responses due by August 17, 2026. The procurement falls under NAICS code 336211 and is managed by the Department of Defense’s LSO Combat Vehicles and Armament office, with performance delivery slated for New Cumberland, PA, 17070-5002. Primary point of contact for inquiries is Ryan Hammond, reachable via email and phone provided in the contract data.
Motor Vehicle Body Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE7L4-26-T-5988
This contract calls for the delivery of one plain seal with NSN 5330-01-645-5546 under solicitation SPE7L4-26-T-5988, with a required delivery within 20 days of award, shipped FOB origin. The item must be packaged in accordance with MIL-STD-2073-1E and sealed in a medium-duty, waterproof, greaseproof, opaque bag meeting MIL-DTL-117, Type II, Class C, Style 1, specifically to protect against UV degradation. Packaging and marking must comply with MIL-STD-129 and DLA Packaging Requirements, with no special marking required and palletization following DLA guidelines. The seal is to be delivered to the USCGC CALHOUN in North Charleston, SC, with shipment via the fastest traceable means—parcel post is prohibited. The contract explicitly prohibits the use of Class I ozone-depleting chemicals in any part or process, overriding any conflicting specification but not relaxing product performance standards. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision controlled by the solicitation or award date depending on acquisition scale. The unit of issue is each, with zero variance allowed in quantity, and inspection and acceptance occur at destination. For government use only codes and routing details are provided for logistics tracking, and the point of contact for inquiries is Anna-Rachelle Betts at DLA.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SEAL, SPECIAL
Solicitation # SPE7L4-26-U-1051
This contract specifies the procurement of a SEAL, SPECIAL item with the NSN 5330-00-930-9089 and part number CM0001326, issued under solicitation SPE7L4-26-U-1051 for a quantity of 222 units at a unit price of $222.00, totaling $49,284. Delivery is required within 97 days FOB origin with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The item is designated as a critical application and strictly prohibited from containing asbestos as defined in FED-STD-313. Technical and quality requirements are incorporated by reference from the DLA Master List, and packaging must comply with MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1, ensuring the item is sealed in a medium-duty, waterproof, greaseproof, opaque bag to protect against UV deterioration. Packaging, marking, and shipping must adhere to DLA’s packaging requirements and MIL-STD-129 with no special marking codes applied. Palletization follows RP001 guidelines, and the unit of issue is the each (EA). The contract applies to direct vendor delivery, foreign military sales, and stock shipments, with hazardous materials handling governed by IP025. The solicitation was posted August 4, 2026, with responses due by August 19, 2026, and is managed by the Department of Defense’s LSO Combat Vehicles and Armament office.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336390
New
DIBBS
PANEL ASSEMBLY, CONSOLE
Solicitation # SPE7L4-26-T-5968
The contract specifies the procurement of one unit of a PANEL ASSEMBLY, CONSOLE with NSN 2540-01-179-8841 and part number L112652, supplied by CNH INDUSTRIAL AMERICA LLC. Delivery is required within five days of contract award, with shipment originating FOB origin and no tolerance for quantity variance. Inspection and acceptance both occur at the destination. The item must be packaged in strict compliance with DLA’s Master List of Technical and Quality Requirements, which override ASTM D3951; if hazardous per FED-STD-313, packaging must meet TQ requirement IP025, otherwise commercial packaging is permitted. All packaging and labeling must adhere to MIL-STD-129 and palletization must follow RP001. The shipment must be sent via traceable freight methods—parcel post is prohibited—and is to be delivered to the designated military receiving site at Fort Polk, Louisiana, under the RDD/NCMS shipment protocol. The contract references solicitation SPE7L4-26-T-5968, with a required delivery date of August 3, 2026, and the point of contact for inquiries is Anna-Rachelle Betts at DLA. The unit of issue is each (EA) and the total contract value is based on the listed unit price for a single item.
Other Motor Vehicle Parts Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
BAR, LOCKING
Solicitation # SPE7L4-26-T-5969
The contract pertains to the procurement of a single unit of a BAR, LOCKING component identified by NSN 1005-01-188-7858 under solicitation SPE7L4-26-T-5969, with a delivery requirement of five days after award. The item is subject to stringent DLA packaging, technical, and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. The component is classified under Category I Munitions List items, triggering strict demilitarization protocols for disposal, and is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location. Only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal authorization may access accompanying technical data. The contract mandates adherence to configuration change management, qualified products or manufacturers lists where applicable, inspection and acceptance at origin, and removal of government identification from non-accepted items. Measuring and test equipment must comply with specified standards, and all parties must follow DFARS 252.225-7048 for export-controlled technical data handling. The procurement is managed by the Department of Defense’s LSO Combat Vehicles and Armament office, with Paula Chapman as the point of contact, and responses are due by August 17, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336390
New
DIBBS
HOOK, PINTLE
Solicitation # SPE7L4-26-U-1050
This contract is for the procurement of a HOOK PINTLE with NSN 2540-01-558-4395 under solicitation SPE7L4-26-U-1050, issued by the Department of Defense through the Defense Logistics Agency. The item is classified as a critical application component and must conform to precise technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, which override any other specification unless explicitly authorized. The contract prohibits the use of Class I ozone-depleting chemicals in manufacturing or packaging, requiring any substitute chemicals to be submitted for approval. The item must be delivered FOB origin within 80 days in strict quantities of 135 units, with no tolerance for variance in quantity. Packaging must comply with DLA-specific requirements including MIL-STD-129 for marking and labeling, ASTM D3951 for commercial packaging unless hazardous per Fed-Std-313, in which case TQ requirement IP025 applies, with palletization conforming to RP001. Inspection and acceptance occur at the destination point, and all packaging must reflect the prescribed Unit of Issue and Quantity per Unit Pack (QUP). The procurement is a total small business set-aside under NAICS code 336390, with the estimated unit price at $135.00 per item totaling $18,225.00, though the quantity is considered estimated and subject to modification by the IDC. The contract references the DLA-defined unit of issue system and directs contractors to the official online resource for ANSI X12 conversion. The point of contact is Heather Kessler of the LSO Combat Vehicles and Armament office, with full solicitation details available through the DIBBS system. The solicitation closed on August 19, 2026, with an award expected to follow, and all suppliers must comply with the requirement to remove government identification from non-accepted supplies. The contract does not specify delivery location beyond FOB origin, and all terms are governed by DLA policies with no deviations permitted without formal amendment.
Other Motor Vehicle Parts Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335999
New
DIBBS
CLAMP, ELECTRICAL
Solicitation # SPE7L4-26-T-5979
This contract is for the procurement of one electrical clamp, identified by NSN 5999-01-302-4282 and part number 480732, under solicitation SPE7L4-26-T-5979, issued by the Department of Defense through the Logistics Support Activity for Combat Vehicles and Armament. Delivery is required within five days of order placement to Fort Riley, Kansas, with FOB origin terms and zero tolerance for quantity variance. The item is classified as a critical application component and must comply with all DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. Packaging must adhere strictly to MIL-STD-129 and RP001, with hazardous materials governed by TQ requirement IP025 and non-hazardous items packaged per ASTM D3951 unless superseded by DLA standards. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval. Transportation must utilize traceable freight methods, excluding parcel post, and all shipments must be marked with the provided government routing and freight information. The required delivery date is August 4, 2026, with no flexibility allowed on delivery timeline or quantity, and acceptance occurs at the destination point.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336360
New
DIBBS
TARPAULIN EXTENSION
Solicitation # SPE7L4-26-T-5983
This contract pertains to the procurement of a tarpaulin extension with NSN 2540-01-723-0399, quantity of one unit, to be delivered within ten days of contract award under solicitation SPE7L4-26-T-5983. Delivery is FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any conflicting standards including ASTM D3951. Packaging must adhere strictly to DLA’s packaging requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous materials packaged according to TQ requirement IP025 if identified per FED-STD-313. Ozone-depleting chemicals are strictly prohibited in the product or its manufacturing process, and any substitute chemicals must be pre-approved unless explicitly authorized. The unit of issue is each (EA), and palletization must follow DLA guidelines. The destination is W8000V, Prince Sultan Air Base, Saudi Arabia, with shipment logistics governed by DLAD Proc Notes C19 and C20. The required delivery date is July 30, 2026, and the item is intended for U.S. Forces maintenance use. The contract excludes any set-aside provisions and falls under NAICS code 336360 for defense manufacturing.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326140
New
DIBBS
INSULATION, THERMAL,
Solicitation # SPE7L4-26-U-1052
The contract pertains to the procurement of thermal insulation with the NSN 2540-01-561-0268, requiring a quantity of 104 units to be delivered within 80 days of award. The solicitation, numbered SPE7L4-26-U-1052, is a total small business set-aside under NAICS code 326140, managed by the Department of Defense’s LSO Combat Vehicles and Armament office. All technical data associated with this item is subject to strict export control regulations under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons, including foreign nationals within the United States or overseas, without prior authorization from the Department of State or Commerce. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with valid US/Canada Joint Certification Program certification, completed training on handling defense export-controlled data, and approved access via the DLA questionnaire are permitted to receive or handle the technical information. The solicitation was posted on August 4, 2026, with a response deadline of August 19, 2026, and point of contact is Heather Kessler at the provided email and phone number.
Polystyrene Foam Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details