Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

LEVER, LOCK-RELEASE

Active
SPE7M8-26-T-5409Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a LEVER, LOCK-RELEASE with NSN 5340-01-486-5031 and part number 3224890-1, sourced under solicitation SPE7M8-26-T-5409, with a required delivery in 495 days, targeting a ship date of December 5, 2027. The item is to be delivered FOB origin with a fixed quantity of 18 units at $18.00 per unit, totaling $324.00, and no quantity variance is permitted. All packaging and labeling must comply with MIL-STD-129 and the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951; if the item is non-hazardous, it must be commercially packaged per ASTM D3951 unless otherwise dictated by a higher-priority DLA requirement, and if hazardous per FED-STD-313, must follow TQ requirement IP025. Palletization must conform to RP001 packaging standards, and the Unit of Issue is each (EA), with one unit per pack. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, and transportation logistics must adhere to DLAD Proc Note C19 for general transport and C20 for first destination. The solicitation was posted on July 15, 2026, with responses due by July 27, 2026, and is classified under NAICS 332510, managed by the Department of Defense’s Electrical Devices Division, with Kitnarone Phengthongsavath as the primary point of contact.

General Info

Procure 18 lock-release levers, NSN 5340-01-486-5031, FOB origin, $324 total, delivery by Dec 5, 2027, to New Cumberland, PA.

Agency

Department Of Defense → ELECTRICAL DEVICES DIVView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M8-26-T-5409 for Electrical Devices

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ELECTRICAL DEVICES DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ELECTRICAL DEVICES DIV
View Agency Profile
Office AddressUS
Contacts
KITNARONE PHENGTHONGSAVATH
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
LEVER,LOCK-RELEASE
LEVER,LOCK-RELEASE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RAYTHEON COMPANY 96214 P/N 3224890-1
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 96214 3224890 REVISION NR A DTD 07/07/2002 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017039506 0001 EA 18.000
NSN/MATERIAL:5340014865031
DELIVERY (IN DAYS):0495
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
SPE7M8-26-T-5409
SECTION B
PR: 7017039506 PRLI: 0001 CONT’D
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:12/05/2027 Original Required Delivery Date:12/05/2027
SPE7M8-26-T-5409 NSN/Part Number: 5340-01-486-5031 Quantity: 18 EA Purchase Request: 7017039506QTY: 18 Delivery: 495 days ADO

Similar Contracts

NAICS: 332510
New
DIBBS
COVER, ACCESSThis contract specifies the procurement of one unit of a cover and access item with NSN 5342-01-706-2636 under solicitation SPE4A0-26-T-3894, requiring delivery within five days to Camp Pendleton, California, with FOB origin terms and zero variance in quantity. Inspection and acceptance occur at the origin, governed by stringent quality standards referenced from the DLA Master List of Technical and Quality Requirements, which override any conflicting commercial standards. The item must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, while palletization follows DLA’s specific packaging directives. Sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances allowed unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. All packaging and marking must remove government identification from non-accepted items and clearly identify the bare item per RQ017. Documentation for source approval is required, and the unit of issue is one each. The item is designated as a critical application item and must be shipped by the fastest traceable means, explicitly prohibiting parcel post. The delivery must meet the original required date of July 6, 2026, and the contract includes specific freight and parcel post addresses, government use codes, and contact information for the contracting officer.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
HINGE, BUTTThe contract is for the procurement of four hinge, butt units with NSN 5340-01-511-0747 and part number K1055-431-151, supplied by Jamison Door Company, under solicitation SPE7L1-26-T-836Z. The items must be delivered FOB destination within 20 days of contract award, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including preservation methods, materials, and unit packaging standards. Marking follows MIL-STD-129 with no special codes applied, and palletization must adhere to DLA guidelines. Mercury and mercury-containing compounds are strictly prohibited in all aspects of preservation, packaging, and marking, except for specific exempted uses like batteries and instruments as defined by NAVSEA, with additional containment requirements for portable devices. The delivery address is the USS Minnesota SSN 783 at FPO AP 96693-4200, and shipment logistics reference DLAD procedural notes C19 and C20. The required delivery date is July 13, 2026, and the contract includes full compliance with the DLA Master List of Technical and Quality Requirements incorporated by reference.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
ANODE, CORROSION PREThis contract pertains to the procurement of an anode for corrosion prevention, identified by NSN 5340-01-661-5836 and part number 6G8-11325-00-00, with a quantity of ten units required. Delivery must be made within twenty days to the destination FOB point, with no variance allowed in the quantity, and inspection and acceptance both occur upon arrival. The item must comply with all applicable DLA Master List of Technical and Quality Requirements, which override any conflicting commercial standards such as ASTM D3951, and packaging must adhere strictly to DLA Packaging Requirements and MIL-STD-129 labeling. Hazardous material regulations apply if the item is classified under FED-STD-313, requiring compliance with TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable. Mercury and mercury-containing compounds are strictly prohibited unless used functionally in approved devices such as batteries, sensors, or weapon systems, and any portable fluorescent lamps or instruments containing mercury must be shockproof with a secondary containment barrier as per NAVSEA 5100-003D. The contract references specific procedural notes for transportation and mandates palletization according to DLA guidelines. The delivery address is located at the U.S. Naval Base Yokosuka, Japan, with the required delivery date set for July 13, 2026, and all documentation must reflect the correct Unit of Issue and Quantity per Unit Pack as specified.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESSThe contract pertains to the procurement of 81 units of COVER, ACCESS with NSN/Part Number 5340-00-465-6384 under solicitation SPE7M2-26-Q-0635, with a response deadline of July 21, 2026, and delivery required 111 days after contract award. The item is subject to strict export control under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons—regardless of location or nationality—is prohibited without prior authorization from the Department of State or Commerce. This restriction extends to foreign national employees and overseas subsidiaries of U.S. companies. Access to the controlled data is limited exclusively to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have passed the DLA Export-Controlled Technical Data Questionnaire. The data is governed by DFARS 252.225-7048 and must be handled in accordance with stringent DLA protocols. The contract is issued by the Department of Defense’s Nuclear Reactor Program, with performance located in New Cumberland, Pennsylvania, and primary point of contact Victoria Payne at Victoria.Payne@dla.mil or 614-693-9911.
NUCLEAR REACTOR PROGRAM

POSTED

about 7 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
DIBBS
SHEET, METALThe contract pertains to the procurement of 10 units of SHEET, METAL with NSN 9535-01-348-3224 under solicitation SPE7M0-26-T-009J, issued by the Department of Defense’s Maritime Supply Chain ESOB unit. Delivery is required within 5 days of award at Pearl Harbor, HI 96860-5033. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must conform to DLA standards, and all supplies must be free of asbestos in compliance with MIL-STD-130N, with any asbestos-containing alternatives requiring explicit approval under Clause L30 and Provision 4. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware, except for enumerated functional uses such as batteries, fluorescent lights, instrument controls, weapon systems, and specific chemical reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and equipped with a secondary containment barrier per NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies, and covered defense information protocols apply. Responses are due by July 27, 2026, and all inquiries should be directed to Grace Beck at grace.beck@dla.mil or 614-698-7554.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details