Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

LEVER, MANUAL CONTRO

Active
SPE7L1-26-T-873XFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one unit of a manual control lever, identified by NSN 3040-01-479-3323, under solicitation SPE7L1-26-T-873X, issued by the Department of Defense's Land Supply Chain. Delivery is required within five days of order at FOB Origin, with the final destination being LRC Maintenance at Schofield Barracks, Hawaii, where inspection and acceptance will occur. The item is defined in part by Army drawings, but chemical agent resistant coating (CARC) and high temperature coating specifications must adhere to DCSC Drawing 16236 CS-2300-0001 in place of any conflicting Army drawing requirements. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for approved functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical analysis reagents as specified by NAVSEA; portable devices containing mercury must incorporate shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E using Preservation Method 10 (clean and dry), packaging code U, unit container E5, and intermediate container E5, while marking must follow MIL-STD-129 with no special markings required. Palletization must conform to DLA Packaging Requirements for Procurement (RP001), and all shipments require barcoding per standardized automated identification protocols. The contract prohibits the use of covered telecommunications equipment from specified foreign entities, restricts hazardous materials in accordance with OSHA and federal standards, and mandates safety data sheet submissions for all hazardous substances. Cybersecurity is strictly governed by NIST SP 800-171 requirements, including system assessments and mandatory reporting of cyber incidents within 72 hours; the contractor must also comply with the DoD's safeguarding and incident reporting mandates and maintain compliance with the prohibition on hexavalent chromium and toxic waste disposal. Payments are required to be submitted electronically via Wide Area WorkFlow, with no alternative invoicing systems accepted. The contract includes clauses affirming whistleblower rights, prohibiting mandatory arbitration agreements, requiring adherence to export controls, and mandating notification of safety issues. It also enforces restrictions on subcontracting, requires small business certifications and unique entity identifiers, and prohibits procurement from communist Chinese military companies. The contract is subject to changes under fixed

General Info

Procure one manual control lever NSN 3040-01-479-3323, FOB origin, deliver to Scholfield Barracks, Hawaii, per DLA and MIL-STD requirements, no mercury.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

333613 - Mechanical Power Transmission Equipment ManufacturingView NAICS

Place of Performance

1920 HIGGINS RD BLDG 6037, SCHOFIELD BARRACKS, HI, 96857-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L1-26-T-873X for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
LEVER,MANUAL CONTRO
LEVER, MANUAL CONTROL.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THE ITEM DESCRIBED IN THIS SOLICITATION
IS DEFINED IN WHOLE OR IN PART BY ARMY
DRAWING(S). THESE DRAWING(S) MAY CONTAIN
A PAINT FINISHING REQUIREMENT. WHERE SUCH
REQUIREMENTS ARE SPECIFIED, USE DCSC DRAWING
16236 CS-2300-0001 IN LIEU OF FINISH REQUIRE
MENTS OF THE ARMY DRAWING(S). THIS DRAWING
CONTAINS SPECIFICATIONS FOR CHEMICAL AGENT
RESISTANT COATINGS (CARC), AND ADDITIONAL
INFORMATION RELATING TO HIGH TEMPERATURE
COATINGS.
CRITICAL APPLICATION ITEM
INDEPENDENT ROUGH TERRAIN CENTER LLC 1NWY2 P/N 920476.008
INDEPENDENT ROUGH TERRAIN CENTER LLC 1NWY2 P/N EP-0003497
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7L1-26-T-873X
SECTION B
PR: 7017584288 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017584288 0001 EA 1.000
NSN/MATERIAL:3040014793323
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:E5 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
WX3JPR
W6XP USALRCTR HAWAII
AWCF SSF LRC STORAGE BR P2 100
1920 HIGGINS RD BLDG 6037
SCHOFIELD BARRACKS HI 96857-5006
US
RDD 999/NMCS SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANS SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
WX3JP5
W6XP USALRCTR HAWAII
LRC MAINTENANCE
1920 HIGGINS RD BLDG 6037
SCHOFIELD BARRACKS HI 96857-5000
US
MARKFOR
WX3JP5
W6XP USALRCTR HAWAII
LRC MAINTENANCE
1920 HIGGINS RD BLDG 6037
SCHOFIELD BARRACKS HI 96857-5000
US
M/F: (TCN) WX3JP562030001
RDD: 999
SPE7L1-26-T-873X
SECTION B
PR: 7017584288 PRLI: 0001 CONT’D
PROJ: 0D1 TP 1
SUPP ADD: WX3JPR SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A31 DIST: ADV: FC: 61
Need Ship Date:00/00/0000 Original Required Delivery Date:07/24/2026
SPE7L1-26-T-873X NSN/Part Number: 3040-01-479-3323 Quantity: 1 EA Purchase Request: 7017584288QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333613
New
DIBBS
LEVER, MANUAL CONTRO
Solicitation # SPE7LX-26-U-9175
The contract covers the procurement of a manual control lever, identified by NSN 3040-01-270-6392 and part number EL060-53300 from DYNAPAR CORP, under solicitation SPE7LX-26-U-9175. The requirement is for eight units, with an estimated quantity that may not be fully purchased by the IDC. Delivery is due within 66 days FOB origin, with zero variance allowed in quantity. The item is classified as a critical application item and must comply with stringent packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, including specific packaging methods, containment codes, and palletization per DLA packaging guidelines. No mercury or mercury-containing compounds may be intentionally added to the item or come into direct contact with it, except for functional uses in batteries, fluorescent lights, sensors, weapon systems, or chemical analysis reagents approved by NAVSEA, with portable fluorescent lamps and instruments requiring shockproof design and secondary containment as per NAVSEA 5100-003D. The contract is a total small business set-aside under NAICS code 333613, and inspection and acceptance occur at the destination. The solicitation was posted on August 3, 2026, with a response deadline of August 18, 2026, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements accessed via the provided portal.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
CYLINDER ASSEMBLY, ACTU
Solicitation # SPE7LX-26-U-8862
The contract is an indefinite-delivery contract under solicitation SPE7LX-26-U-8862 issued by the Defense Logistics Agency’s Strategic Acquisition Program Directorate for the procurement of 44 linear actuating cylinder assemblies with NSN 3040-01-549-3730 and part number 91743379 from CNH INDUSTRIAL AMERICA LLC. The delivery is required within 129 days after the issuance of a delivery order, with FOB origin terms applying, and no firm quantity is guaranteed—44 units is an estimated non-binding volume. The total contract ceiling is set at $350,000, with a guaranteed minimum of six units, and all orders are subject to the one-year ordering period. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization following DLA’s RP001 requirements, and the DLA Master List of Technical and Quality Requirements overrides any conflicting specifications. The use of Class I ozone-depleting chemicals is strictly prohibited, and substitute chemicals must be pre-approved unless explicitly authorized by the governing specification. Inspection and acceptance occur at the destination, with government oversight. The contract mandates electronic invoicing through Wide Area WorkFlow (WAWF) and requires compliance with multiple FAR and DFARS clauses, including those on combating human trafficking, employment eligibility verification, sustainable products, hazardous material safety, and NIST SP 800-171 cybersecurity assessments. Contractors must also comply with ocean transportation rules requiring U.S.-flag vessels unless otherwise authorized, and must report any radioactive materials exceeding specific thresholds. The solicitation emphasizes compliance over price and indicates an LPTA methodology is likely, with awards expected to be processed automatically through DIBBS, the mandatory electronic submission platform. Small business, HUBZone, and other socioeconomic status representations are required, and offerors must provide their Unique Entity Identifier and CAGE code. No formal statement of work is included, as performance is defined by delivery of the specified item under a unilateral, non-binding IDC structure.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333613
New
DIBBS
DISC, BRAKE
Solicitation # SPE7L1-26-T-869V
The contract solicitation SPE7L1-26-T-869V seeks seven brake discs identified by NSN 3040-01-512-1744 for delivery to Tracy, California, with a 168-day delivery window from award date. The item is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with packaging governed by MIL-STD-2073-1E and marking compliant with MIL-STD-129, including dry preservation and no special markings beyond standard requirements. Mercury or mercury-containing compounds are prohibited from intentional addition or direct contact with the hardware, except for specific exempted components such as functional batteries, sensors, naval instruments, and chemical reagents authorized by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof with a secondary containment. Hazardous materials must adhere to the Hazard Communication Standard (29 CFR 1910.1200), with labeling and Safety Data Sheets submitted prior to award, and any use of foreign-flag vessels for transportation requires explicit prior approval and 45-day advance notification. The contract mandates compliance with cybersecurity requirements including safeguarding covered defense information under 252.204-7012 and reporting cyber incidents, alongside employment and trafficking compliance clauses including equal opportunity, employment eligibility verification, and sustainable product obligations. All deliveries are FOB destination, inspected and accepted by the government at the receipt point, and invoices must be submitted exclusively through Wide Area WorkFlow (WAWF). The solicitation does not include pricing information, estimated contract value, or an explicit statement of work, and evaluation factors for award are not provided, though socioeconomic preferences for small businesses are referenced. Offerors must maintain active UEI and CAGE codes, represent their small business status, and fully comply with all applicable clauses, including those governing subcontracting, payment acceleration to small business subs, and whistleblower rights. The delivery is directed to W1A8 DLA DIST SAN JOAQUIN, and all submissions must be made electronically via the DLA Internet Bid Board System by the deadline of August 6, 2026.
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333613
New
DIBBS
CHAIN, SILENT
Solicitation # SPE7L4-26-T-5765
The contract pertains to the procurement of 324 units of CHAIN, SILENT, identified by NSN 3020-01-358-8601, under solicitation SPE7L4-26-T-5765, issued as a Total Small Business Set-Aside under FAR 19.5 with NAICS code 333613. Delivery is required within 168 days after award, with the original delivery date set for March 10, 2027, and a need ship date of January 19, 2027; all items must be delivered FOB Origin to the specified receiving location at DLA Distribution Red River, Building 499, Texarkana, TX 75507-5000. Inspection and acceptance occur at the destination, with the government responsible for both processes. Packaging must strictly adhere to MIL-STD-2073-1E, including specified preservation methods, wrapping materials, container types, and packaging code U; palletization must comply with DLA’s RP001 packaging requirements. Marking is governed by MIL-STD-129 with no special marking required, and barcoding must conform to industry standards such as GS1-128. The contract mandates electronic invoicing via Wide Area WorkFlow (WAWF) and prohibits all alternative payment submission methods. Compliance with numerous Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses is required, including those addressing employment eligibility verification, combating human trafficking, sustainable products, cybersecurity safeguards per NIST SP 800-171, prohibition on hexavalent chromium, export control, and restrictions on covered telecommunications equipment from specified foreign entities. The contractor must maintain active registration in SAM and comply with post-award small business program representations. Technical and quality requirements are incorporated from the DLA Master List of Technical and Quality Requirements using designated R or I numbers, and all items must meet these referenced specifications. The solicitation closed on August 6, 2026, and the award will be made to a small business concern certified under the SBA’s set-aside program, with no pricing information provided within the solicitation, indicating that offers will be evaluated under a Lowest Price Technically Acceptable (LPTA) framework consistent with the socioeconomic constraints and lack of competitive pricing data.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, SHOULDERED
Solicitation # SPE7LX-26-U-9165
The contract pertains to the procurement of eight shouldered shafts with the NSN 3040-01-073-4254 under a total small business set-aside, with responses due by August 18, 2026, and delivery required within 125 days after award. The acquisition falls under NAICS code 333613 and is administered by the Department of Defense’s Strategic Acquisition Program Directorate. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, and compliance with revised versions is controlled based on the acquisition size and amendment dates. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed. The item is subject to export control under ITAR or EAR, requiring prior authorization for any disclosure or transfer of associated technical data to foreign persons, including foreign national employees and overseas subsidiaries. Access to this controlled data is restricted to contractors with approved JCP certification, completed training on handling DOD export-controlled data, and formal approval by DLA. Inspection and acceptance may occur at the manufacturer’s origin, and a Certificate of Conformance is permitted unless prohibited by a quality assurance letter. Configuration changes require formal engineering change proposals or variance requests, and the contract mandates full and open competition under the small business set-aside. The primary point of contact for inquiries is Theodore Misiolek at the provided email and phone number.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, STRAIGHT
Solicitation # SPE7L1-26-T-906Q
The contract is for the procurement of one straight shaft with NSN 3040-01-491-3925 under solicitation number SPE7L1-26-T-906Q, with a required delivery within five days of award. The item is part of a full and open competition managed by the Department of Defense through the Land Supply Chain, and the offeror must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization. Covered Defense Information applies, and the supplier is prohibited from using any Class I ozone-depleting chemicals in the manufacturing or incorporation of the part; any substitute chemicals require prior approval unless explicitly authorized by specifications. Complete technical data packages, including data for both approved and alternate parts, must be provided if Table A0648 is referenced. The place of performance is Portsmouth, with a zip code of 03801-5000. Responses are due by August 14, 2026, and the solicitation was posted on August 3, 2026. The primary point of contact for inquiries is Kristina Derry, reachable via email and phone provided.
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
PROPELLER SHAFT, VEH
Solicitation # SPE7LX-26-U-9138
This contract under solicitation SPE7LX-26-U-9138 is an indefinite delivery contract for the procurement of two propeller shafts for vehicles, identified by NSN 2520016592616, with a guaranteed minimum of one unit and a maximum contract value of $350,000. The item is a restricted source requiring prior engineering source approval from the Government Design Control Activity, and any configuration changes must be formally submitted through an Engineering Change Proposal or request for variance with government authorization. Performance is FOB origin, with inspection and acceptance also occurring at the contractor’s origin point, and delivery must be completed within 77 days after order placement. Packaging and preservation must fully comply with MIL-STD-2073-1E, including specific methods for cleaning, drying, preservation materials, wrapping, cushioning, and unit containers, while marking and labeling adhere strictly to MIL-STD-129, although Item Unique Identification is not required. Palletization is governed by DLA Packaging Requirements for Procurement, and all items must be free of Class I ozone-depleting chemicals, a prohibition that supersedes any conflicting specification. The solicitation is a total small business set-aside under NAICS code 333613 with an August 18, 2026, response deadline, and submissions must be made exclusively via the DLA Internet Bid Board System. Contract administration is governed by a comprehensive set of FAR and DFARS clauses covering contract type, changes, inspection, payment, subcontracting, cybersecurity, environmental compliance, and prohibition of hazardous substances including hexavalent chromium and toxic materials. Payment must be processed through WAWF, with electronic invoicing required, and contractors must comply with NIST SP 800-171 for safeguarding covered defense information and reporting cyber incidents. The contracting officer’s representative will be designated upon award, and offerors must accurately represent their small business status and, if applicable, disclose UEI and CAGE codes for joint ventures or covered telecommunications equipment. The contract allows for delivery orders under a SIDC framework, with no unit price specified but estimated annual demand at two units, and pricing must reflect FOB origin terms including all costs to a U.S. destination.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
SHOE, THRUST BEARING
Solicitation # SPE7L1-26-T-873W
The contract pertains to the procurement of six units of a thrust bearing shoe, identified by NSN 3040-01-420-8447 and part numbers from Kingsbury Inc., to be delivered FOB origin with a 168-day delivery period after award, targeting a need ship date of January 19, 2027, and an original required delivery date of January 24, 2027. Deliveries are to be made to the DLA Distribution facility in New Cumberland, Pennsylvania, and inspection and acceptance occur at the destination point. Packaging must strictly conform to MIL-STD-2073-1E, including specific preservation methods, materials, and unit container codes, while marking and labeling adhere to MIL-STD-129 with no special markings required. Palletization follows DLA’s RP001 packaging requirements. The item is classified as a critical application and must not contain intentional mercury or mercury compounds, except in specified exempt applications such as batteries, fluorescent lamps, sensors, weapon systems, or NAVSEA-approved reagents, with portable mercury-containing devices requiring secondary containment per NAVSEA 5100-003D. Cybersecurity compliance is mandated at CMMC Level 2 with a self-assessment requirement, and safeguarding of covered contractor information systems is governed by FAR 52.240-93 under deviation 2026-00038. Covered defense information applies, and the contractor must comply with provisions prohibiting unauthorized obligations, subcontracting for commercial products, and requiring internal confidentiality agreements. The solicitation is classified as a simplified acquisition under FAR 52.213-4, with a fixed-price contract type and no option quantities or pricing values disclosed in the line item, though the unit quantity is six. All suppliers must maintain an active UEI and CAGE code, submit accurate socioeconomic representations including small business status, and comply with the Buy American Act and Berry Amendment. Hazardous materials must be identified with Safety Data Sheets submitted prior to award, labeled per OSHA standards, and any radioactive materials require advance notification. Invoicing must be submitted electronically via WAWF, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. The contract does not include a formal Section J attachment list but requires supporting documentation for packaging, hazard labeling, and telecommunications equipment disclosures. The contract is issued by the
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333613
New
DIBBS
CONNECTING LINK, RIGID
Solicitation # SPE7LX-26-U-9212
The contract is for a rigid connecting link identified by NSN 3040123459319 and part number 0242 0053 from Deutz AG, with a single unit required and a delivery timeframe of 74 days FOB origin. The item is procured under solicitation SPE7LX-26-U-9212 as a Total Small Business Set-Aside under NAICS code 333613, with no variance allowed in quantity—exactly one unit must be delivered. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA’s RP001 packaging requirements, and all packaging must be marked and labeled accordingly. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over any conflicting standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be approved unless explicitly authorized by the specification. Inspection and acceptance occur at the destination, and the unit of issue is each (EA). This is a DLA Direct, CONUS procurement with a unit price of $1.00 and a total price of $1.00, though the quantity is estimated and may not be purchased by the IDC. The primary point of contact is Theodore Misiolek, with solicitation response due by August 18, 2026.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, SHOULDERED
Solicitation # SPE7L3-26-Q-1256
The contract specifies the procurement of two shafts, shoulderized, identified by NSN 3040-01-689-8002 and part number 7662408, under solicitation SPE7L3-26-Q-1256, with a firm fixed price and zero variance in quantity. Delivery is required within 179 days after order, with inspection and acceptance occurring at the destination, and FOB origin. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, using specified methods, materials, and markings in accordance with MIL-STD-129 without special markings. The item is controlled by a source-controlled drawing, and only approved sources listed on the drawing are currently authorized, though additional qualified sources may exist; any new supplier seeking future qualification must contact the cognizant design activity. The product must not contain Class I ozone-depleting chemicals, overriding any conflicting specification but not relaxing product performance requirements, with substitutions requiring prior approval. Cybersecurity requirements include a CMMC Level 2 self-assessment, and covered defense information protocols apply. The item must adhere to all technical and quality requirements referenced in the DLA Master List via R or I numbers. The shipment must be delivered to the specified government receiving warehouse in Tracy, CA, and transportation protocols are governed by DLAD procedural notes. The contract has a response deadline of August 18, 2026, with a need date of May 1, 2027, and is managed by the Department of Defense’s Land Supplier Operations Vehicle Support office.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
SHOE, THRUST BEARING
Solicitation # SPE7L1-26-T-860U
The contract solicitation SPE7L1-26-T-860U is for the procurement of 27 units of a SHOE, THRUST BEARING with a total estimated value of $729.00, under a Total Small Business Set-Aside as defined by FAR 19.5. The item is identified by NSN 3040-01-420-8447 and must be supplied by a qualified small business in compliance with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. All supplies must conform to MIL-STD-2073-1E for packaging and preservation, with unit containers marked as E5 and packaged using preservation method 33, cling/dry 1, and preservation material 49. Marking must follow MIL-STD-129, including standardized barcoding, with no special marking required. The delivery is FOB origin with a 154-day ADO window, targeting shipment by January 5, 2027, and final delivery to the DLA Distribution facility in New Cumberland, Pennsylvania. Mercury and mercury-containing compounds are strictly prohibited except for approved functional uses in batteries, sensors, instruments, weapon systems, and specified reagents, with portable devices containing mercury requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Cybersecurity compliance is enforced through CMMC Level 2 self-assessment and adherence to NIST SP 800-171 and DFARS 252.204-7012 for safeguarding covered defense information. Invoicing must be conducted exclusively through WAWF using electronic submission methods, with payment processed via electronic channels and accelerated payments mandated for small business subcontractors. Contract administration requires adherence to a comprehensive set of FAR and DFARS clauses covering inspection at destination, contractor accountability for hazardous materials, trafficking in persons, employment verification, sustainable products, and prohibitions on hexavalent chromium and covered defense telecommunications equipment. The offeror must provide a valid Unique Entity ID and CAGE Code, declare small business status, and affirm compliance with all socioeconomic and cybersecurity representations. No options or quantities beyond the specified 27 units are included, and the acquisition is classified as simplified with a single CLIN and fixed unit price of $27.000 per unit.
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333613
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-26-T-857C
The contract is for the procurement of a mounting bracket, identified by NSN 5340006959106 and part number 8694423, with a quantity of 17 units to be delivered within five days of order placement under FOB Origin terms. The item is manufactured using a metal casting process, requiring specialized tooling, and sourcing inquiries must be directed to DLA’s Aviation or Land and Maritime Supply Chain assistance teams. Quality compliance is governed by the DLA Master List of Technical and Quality Requirements, which supersedes all other standards including ASTM D3951 for packaging. The product contains components subject to Qualified Products Lists or Qualified Manufacturers Lists, requiring strict adherence to qualification criteria outlined in procurement note H02. Sampling for inspection must follow MIL-STD-1916 or a comparable zero-based method, with critical, major, and minor attributes assigned AQLs of 0.1, 1.0, and 4.0 respectively, and acceptance requires zero non-conformances in the sample lot unless otherwise specified. Packaging and labeling must conform to MIL-STD-129, with palletization following RP001 DLA packaging guidelines. Delivery is to Anniston Army Depot in Alabama, with freight shipment required via traceable means, excluding parcel post. The contract mandates electronic invoicing through WAWF and requires compliance with multiple FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment verification, sustainable products, hazardous material identification, cybersecurity, export control, and prohibition of hexavalent chromium. The contract is fixed-price with full and open competition, and no small business set-aside applies. While pricing data is partially listed, unit and total pricing details are incomplete, preventing calculation of the total contract value. All documentation, including technical drawings, is available only during the open solicitation period through DIBBS. Contract performance is subject to government inspection and acceptance at the destination, with no pre-award site visits or key personnel requirements specified.
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 541611
New
DIBBS
Small Business Subcontracting and Representation SupportThe contract seeks support for small business subcontracting and representation compliance, specifically focusing on accurate socioeconomic representations and adherence to the nonmanufacturer rule for resellers. This effort is critical for ensuring that small business subcontractors meet federal procurement requirements regarding ownership, control, and manufacturing standards, particularly in contexts where goods are sourced from nonmanufacturer suppliers. The work involves providing expert guidance to maintain compliance throughout the subcontracting process and avoiding potential disqualifications or penalties tied to misrepresentations. The contract is associated with NAICS code 541611, indicating services in management consulting, and is linked to the Department of Defense through its Land Supply Chain office, with performance expected in Port Hueneme, California, under the ZIP code 93043. Responses must be submitted by August 14, 2026, and the opportunity is publicly accessible via the DIBBS platform. While no set-aside classification is specified, the focus remains strictly on enabling small business participation and ensuring regulatory alignment in the supply chain, particularly for resellers navigating complex federal contracting rules.
Administrative Management and General Management Consulting Services

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 493190
New
DIBBS
Military Packaging and Marking ServicesThe contract requires the packaging and marking of exhaust gas sensors in strict adherence to MIL-STD-129 standards for military shipment, encompassing all aspects of preservation, cushioning, and labeling to ensure product integrity and compliance during transport. All packaging must meet exacting military specifications to safeguard sensitive components from environmental and physical damage, with precise documentation and marking requirements to support logistics and inventory management across the defense supply chain. Performances are to be executed at the designated location in Port Hueneme, California, with a response deadline of August 14, 2026. This is classified as a subcontract under NAICS code 493190, managed by the Department of Defense through the Land Supply Chain organization. The work is critical to fulfilling defense logistics needs, requiring full compliance with federal military standards and timely delivery to support operational readiness. Participation is open to qualified subcontractors capable of meeting these rigorous technical and procedural requirements without deviation.
Other Warehousing and Storage

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Labeling ServicesThe contract seeks specialized services for the preparation and submission of hazard warning labels and Safety Data Sheets (SDS) that align with the Occupational Safety and Health Administration’s Hazard Communication Standard and MIL-STD-129 requirements. The work involves ensuring accurate, compliant documentation for hazardous materials used by the Department of Defense, with a specific focus on meeting federal military and workplace safety regulations. Deliverables must reflect precise chemical identification, risk communication, and labeling protocols consistent with both civilian and defense standards. Performance of the contract is designated to occur at Port Hueneme, California, with a response deadline of August 14, 2026, and a posting date of August 3, 2026. This is a subcontract opportunity classified under NAICS code 541690, which covers other scientific and technical consulting services. The contracting activity falls under the Land Supply Chain within the Department of Defense, indicating the services are critical to logistics and supply chain operations involving hazardous materials. No set-aside provisions are specified, and the contract is open to eligible subcontractors capable of delivering full compliance with OSHA HCS and military labeling requirements.
Other Scientific and Technical Consulting Services

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334510
New
DIBBS
Exhaust Gas Sensor Supply and ManufacturingThe contract calls for the manufacture and supply of exhaust gas sensors in full compliance with DLA technical specifications, encompassing all phases of production, rigorous quality control procedures, and timely delivery to fulfill operational requirements. The work must align with industry standards for reliability and performance under demanding conditions, ensuring the sensors meet the stringent demands of defense applications. All manufacturing processes, testing protocols, and documentation must be conducted with precision and traceability to guarantee consistency and conformity throughout the production lifecycle. The contract is classified as a subcontract under NAICS code 334510, specifically targeting the aerospace ingredient and component manufacturing sector, with performance mandated to occur at Port Hueneme, California, zip code 93043. The solicitation, posted on August 3, 2026, requires responses to be submitted by August 14, 2026, and is administered by the Land Supply Chain organization under the Department of Defense. While no set-aside classification or point of contact is specified, successful bidders must demonstrate proven capability in high-reliability sensor production and adherence to federal defense procurement standards, with delivery timelines and quality assurances tightly integrated into the award decision.
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 000000
New
DIBBS
Unable to Retrieve Subcontract OpportunitiesThe contract opportunity titled "Unable to Retrieve Subcontract Opportunities" was posted on August 3, 2026, with a response deadline of August 14, 2026, and is categorized as a subcontract under the Department of Defense’s LAND SUPPLY CHAIN organization. The place of performance is identified as Tracy, California, with a zip code of 95304-5000, though no specific city or state details beyond that are provided. The solicitation number is SPE7L126T907H, and the NAICS code is listed as 000000, indicating missing or undefined classification. The type of set aside and organization type are not specified, and no point of contact information is available. Access to the full details is through the DIBBS platform, but the prime contract data could not be retrieved due to a gateway timeout, and no subcontract opportunities could be identified at this time.

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Specialized Packaging and Marking ServicesThe contract requires specialized packaging and marking services in strict compliance with MIL-STD-129 military standards, ensuring all items are properly labeled with National Stock Numbers and prepared for secure, traceable shipment. Electronic reporting through the Web Automated Warehouse Facility must be completed to maintain accurate logistical records and ensure full visibility across defense supply chains. The work is to be performed at FPO, with a zip code of 96694, and is classified under NAICS code 561910 as a subcontract opportunity under the Department of Defense’s Land Supply Chain. Bidders must submit their responses by the deadline of August 14, 2026, following all regulatory and technical requirements outlined by the military’s packaging and marking protocols to qualify for award.
Packaging and Labeling Services

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract seeks specialized services to ensure compliance with federal and Department of Defense hazard communication standards, focusing on the preparation of Safety Data Sheets, accurate identification of hazardous materials, and proper labeling procedures. All work must adhere strictly to regulatory requirements governing the handling, documentation, and communication of dangerous substances in military and defense environments. The services are critical to maintaining operational safety and legal conformity across DoD facilities. This subcontract opportunity, posted on August 3, 2026, with a response deadline of August 14, 2026, falls under NAICS code 541690 for other scientific and technical consulting services. Performance is expected to be conducted at FPO, ZIP 96694, with no specific office address or point of contact provided. The solicitation is open for subcontractors capable of delivering precise, compliant hazard communication solutions tailored to the unique demands of the Land Supply Chain under the Department of Defense.
Other Scientific and Technical Consulting Services

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
Plug Assembly, Sealing Component ManufacturingThe contract seeks the manufacture and delivery of a plug assembly and sealing component identified by NSN 5340016411239 and Part Number P001356-04, aligned precisely with the technical and quality requirements set by the prime contractor. This is a subcontract under the Department of Defense’s Land Supply Chain, with a NAICS code of 332510 indicating classification within the forging and stamping industry. The work is to be performed at a military post office address with ZIP code 96694, reflecting potential deployment or military logistics requirements. The solicitation was posted on August 3, 2026, and responses must be submitted by August 14, 2026, leaving a narrow eleven-day window for qualified vendors to prepare and submit proposals. The contract does not specify a set-aside type, meaning it is open to all eligible contractors without preference given to small businesses or other designated categories. Access to detailed requirements and submission instructions is available through the DIBBS portal at the provided link.
Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336390
New
DIBBS
Supply of Drive Shaft (NSN: 3040997297518)
Other Motor Vehicle Parts Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332998
New
DIBBS
Precision Seals Manufacturing and Supply
Enameled Iron and Metal Sanitary Ware Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
Ejection Chute Manufacturing and SupplyThe contract calls for the manufacture and supply of 30 ejection chutes identified by NSN 1005015521264, all produced to meet rigorous military specifications. The scope encompasses complete production, stringent quality control measures, appropriate packaging, and timely delivery with full supply chain traceability to ensure accountability and compliance with defense standards. The work is classified as a subcontract under NAICS code 332999 and is managed by the Department of Defense through the LAND SUPPLY CHAIN organization, with performance required at NEW CUMBERLAND, PA, 17070-5002. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, providing a narrow window for qualified subcontractors to submit proposals. While no specific set-aside details are provided, the transaction is intended for the defense supply chain and requires adherence to federal contracting protocols. All deliverables must align with military readiness requirements, and the contractor must demonstrate the capability to maintain traceability across all materials and processes. The contract remains active through the DIBBS platform, accessible via the provided UI link, and is open to eligible subcontractors prepared to meet exacting defense manufacturing standards.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: NA
New
DIBBS
Unable to Decompose Subcontract OpportunitiesThe contract solicitation titled "Unable to Decompose Subcontract Opportunities" was posted on August 3, 2026, with a response deadline of August 14, 2026, and is categorized as a subcontract opportunity under the Department of Defense, specifically managed by the LAND SUPPLY CHAIN. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, though no specific city, state, or country details are provided beyond that. The NAICS code is listed as NA, and no set-aside type or description is available, indicating a lack of designated small business or special programming criteria. The agency has not identified any subcontract opportunities within this solicitation, and no point of contact information is provided, limiting direct communication pathways. The official solicitation can be accessed via the DIBBS platform at the provided URL, though system limitations have prevented the retrieval of detailed contract data or decomposable subcontract opportunities.

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details