This Solicitation opportunity from Department Of Defense was posted on May 4, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
LIDOCAINE, PATCH
Closed
SPE2DP-26-T-3246FederalSubmission Closed
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
Show more
This contract covers the procurement of Lidocaine adhesive patches, each containing 700 mg of lidocaine in a 5% strength formulation, indicated specifically for the relief of pain associated with post-herpetic neuralgia. The patches are designed for cutaneous application on intact skin, with instructions to use up to three patches simultaneously for a maximum of 12 hours within a 24-hour period. Each patch measures 10 cm by 14 cm and is individually sealed, with packaging supplied in cartons containing 30 patches. The product must be stored at controlled room temperature between 20° to 25°C, avoiding moisture exposure to maintain adhesion. The contract specifies commercial packaging requirements designed to protect the product during transportation and delivery, adhering to labeling standards under Medical Marking Standard No. 1C, and compliance with federal hazardous material regulations. The delivery points include Fort Stewart, GA, and Fort Campbell, KY, with a required delivery timeframe of 20 days post-order. Quantity ordered includes packages of three and six, with no allowance for quantity variance. Attention to regulatory compliance, including OSHA’s revised hazard communication standards, submission of Safety Data Sheets prior to award approval, and appropriate employee training is mandated. The contract is managed by the Department of Defense’s Medical Supply Chain Pharmacy FSA and requires traceable shipping methods to ensure secure and timely delivery.
General Info
Procurement of 700 mg lidocaine patches for post-herpetic neuralgia, with strict packaging, delivery, and compliance.
Agency
Department Of Defense → MEDICAL SUPPLY CHAIN PHARM FSA
NAICS
424210 - Drugs and Druggists' Sundries Merchant Wholesalers View NAICS
Place of Performance
BLDG 1509 WEST 6TH STREET, FORT STEWART, GA, 31314-5185, USSet-Aside
NONE
Documents
(1)AI Contract Breakdown
Uniform Contract FormatWhat is UCF?
Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.
Timeline
PhaseClosed
Submission Closed
Organization & Contact Information
Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN PHARM FSA
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN PHARM FSA
Office AddressUS
Contacts
Full Description
Show more
LIDOCAINE,PATCH
LIDOCAINE,PATCH.
RX ONLY. EACH ADHESIVE PATCH CONTAINS 700 MG
OF LIDOCAINE (50 MG PER GRAM ADHESIVE) IN AN
AQUEOUS BASE. INDICATED FOR RELIEF OF PAIN
ASSOCIATED WITH POST-HERPETIC NEURALGIA. IT
SHOULD BE APPLIED ONLY TO INTACT SKIN. APPLY
LIDOCAINE PATCH 5% TO INTACT SKIN TO COVER
THE MOST PAINFUL AREA. APPLY THE PRESCRIBED
NUMBER OF PATCHES (MAXIMUM OF 3), ONLY ONCE
FOR UP TO 12 HOURS WITHIN A 24-HOUR PERIOD.
PATCH SIZE 10 CM × 14 CM, ROUTE OF
ADMINISTRATION CUTANEOUS, DOSE FORM ADHESIVE
PATCH, MEDICATED STRENGTH 5 %;700 MG OVER
12 HOURS
.
UNIT OF ISSUE IS A PACKAGE (OR CARTON)
CONTAINING 30 EACH (INDIVIDUALLY SEALED
PATCHES OR CHILD-RESISTANT ENVELOPES).
.
STORE AT 20° TO 25°C (68° TO 77°F) [SEE USP
CONTROLLED ROOM TEMPERATURE]. LIDOCAINE
PATCH 5% MAY NOT STICK IF IT GETS WET.
AVOID CONTACT WITH WATER, SUCH AS BATHING<(>,<)>
SWIMMING OR SHOWERING.
.
LABELING AND MARKING MUST IN ACCORDANCE WITH
MEDICAL MARKING STANDARD NO. 1C.
.
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description. Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
SPE2DP-26-T-3246
SECTION B
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html RS016: Shelf-life requirement RS001 for a TYPE I (CODE M) item with a shelf life of 24 months (non-extendable) applies to this item.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SHALL BE MARKED IAW THE LATEST EDITION OF
THE MEDICAL MARKING STANDARD NO. 1.
MMS NO. 1 IS AVAILABLE ONLINE AT:
https://www.dla.mil/Logistics-Operations/Packaging/
YARAL PHARMA INC 9D9C5 P/N NDC82347-0505-05 AVKARE LLC 4QGW8 P/N NDC42291-0495-30 AMNEAL PHARMACEUTICALS OF NEW YORK, LLC 557X3 P/N NDC65162-0791-08 GSMS INC 7A8G1 P/N NDC51407-0827-30 AMERISOURCEBERGEN DRUG CORP 1XUY5 P/N NDC00591-3525-30
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE2DP-26-T-3246
SECTION B
PR: 7016614587 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016614587 0001 PG 3.000
NSN/MATERIAL:6505016572003
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W33RBS
0087 CS BN CO A COMPOSITE
AWCF SSF
BLDG 1509 WEST 6TH STREET
FORT STEWART GA 31314-5185
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W33RBS
0087 CS BN CO A COMPOSITE
AWCF SSF
BLDG 1509 WEST 6TH STREET
FORT STEWART GA 31314-5185
US
MARKFOR
W33RBS
0087 CS BN CO A COMPOSITE
AWCF SSF
BLDG 1509 WEST 6TH STREET
FORT STEWART GA 31314-5185
SPE2DP-26-T-3246
SECTION B
PR: 7016614587 PRLI: 0001 CONT’D
US
M/F: (TCN) W33RBS61190073
RDD: 133
PROJ: TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: V ADV: 2A FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:05/06/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7016620723 0001 PG 6.000
NSN/MATERIAL:6505016572003
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W34GMT
0129 CS BN CO A COMPOSITE
AWCF SSF
BLDG 5505A WICKHAM AVE
SPE2DP-26-T-3246
SECTION B
PR: 7016620723 PRLI: 0001 CONT’D
FORT CAMPBELL KY 42223-5000
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W34GMT
0129 CS BN CO A COMPOSITE
AWCF SSF
BLDG 5505A WICKHAM AVE
FORT CAMPBELL KY 42223-5000
US
MARKFOR
W34GMT
0129 CS BN CO A COMPOSITE
AWCF SSF
BLDG 5505A WICKHAM AVE
FORT CAMPBELL KY 42223-5000
US
M/F: (TCN) W34GMT61210312
RDD: 136
PROJ: TP 3
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A0A DIST: V ADV: 2A FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:05/07/2026
SPE2DP-26-T-3246 NSN/Part Number: 6505-01-657-2003 Quantity: 3 PG Purchase Request: 7016620723QTY: 6 Delivery: 20 days ADO
LIDOCAINE,PATCH.
RX ONLY. EACH ADHESIVE PATCH CONTAINS 700 MG
OF LIDOCAINE (50 MG PER GRAM ADHESIVE) IN AN
AQUEOUS BASE. INDICATED FOR RELIEF OF PAIN
ASSOCIATED WITH POST-HERPETIC NEURALGIA. IT
SHOULD BE APPLIED ONLY TO INTACT SKIN. APPLY
LIDOCAINE PATCH 5% TO INTACT SKIN TO COVER
THE MOST PAINFUL AREA. APPLY THE PRESCRIBED
NUMBER OF PATCHES (MAXIMUM OF 3), ONLY ONCE
FOR UP TO 12 HOURS WITHIN A 24-HOUR PERIOD.
PATCH SIZE 10 CM × 14 CM, ROUTE OF
ADMINISTRATION CUTANEOUS, DOSE FORM ADHESIVE
PATCH, MEDICATED STRENGTH 5 %;700 MG OVER
12 HOURS
.
UNIT OF ISSUE IS A PACKAGE (OR CARTON)
CONTAINING 30 EACH (INDIVIDUALLY SEALED
PATCHES OR CHILD-RESISTANT ENVELOPES).
.
STORE AT 20° TO 25°C (68° TO 77°F) [SEE USP
CONTROLLED ROOM TEMPERATURE]. LIDOCAINE
PATCH 5% MAY NOT STICK IF IT GETS WET.
AVOID CONTACT WITH WATER, SUCH AS BATHING<(>,<)>
SWIMMING OR SHOWERING.
.
LABELING AND MARKING MUST IN ACCORDANCE WITH
MEDICAL MARKING STANDARD NO. 1C.
.
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description. Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
SPE2DP-26-T-3246
SECTION B
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html RS016: Shelf-life requirement RS001 for a TYPE I (CODE M) item with a shelf life of 24 months (non-extendable) applies to this item.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SHALL BE MARKED IAW THE LATEST EDITION OF
THE MEDICAL MARKING STANDARD NO. 1.
MMS NO. 1 IS AVAILABLE ONLINE AT:
https://www.dla.mil/Logistics-Operations/Packaging/
YARAL PHARMA INC 9D9C5 P/N NDC82347-0505-05 AVKARE LLC 4QGW8 P/N NDC42291-0495-30 AMNEAL PHARMACEUTICALS OF NEW YORK, LLC 557X3 P/N NDC65162-0791-08 GSMS INC 7A8G1 P/N NDC51407-0827-30 AMERISOURCEBERGEN DRUG CORP 1XUY5 P/N NDC00591-3525-30
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE2DP-26-T-3246
SECTION B
PR: 7016614587 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016614587 0001 PG 3.000
NSN/MATERIAL:6505016572003
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W33RBS
0087 CS BN CO A COMPOSITE
AWCF SSF
BLDG 1509 WEST 6TH STREET
FORT STEWART GA 31314-5185
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W33RBS
0087 CS BN CO A COMPOSITE
AWCF SSF
BLDG 1509 WEST 6TH STREET
FORT STEWART GA 31314-5185
US
MARKFOR
W33RBS
0087 CS BN CO A COMPOSITE
AWCF SSF
BLDG 1509 WEST 6TH STREET
FORT STEWART GA 31314-5185
SPE2DP-26-T-3246
SECTION B
PR: 7016614587 PRLI: 0001 CONT’D
US
M/F: (TCN) W33RBS61190073
RDD: 133
PROJ: TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: V ADV: 2A FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:05/06/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7016620723 0001 PG 6.000
NSN/MATERIAL:6505016572003
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W34GMT
0129 CS BN CO A COMPOSITE
AWCF SSF
BLDG 5505A WICKHAM AVE
SPE2DP-26-T-3246
SECTION B
PR: 7016620723 PRLI: 0001 CONT’D
FORT CAMPBELL KY 42223-5000
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W34GMT
0129 CS BN CO A COMPOSITE
AWCF SSF
BLDG 5505A WICKHAM AVE
FORT CAMPBELL KY 42223-5000
US
MARKFOR
W34GMT
0129 CS BN CO A COMPOSITE
AWCF SSF
BLDG 5505A WICKHAM AVE
FORT CAMPBELL KY 42223-5000
US
M/F: (TCN) W34GMT61210312
RDD: 136
PROJ: TP 3
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A0A DIST: V ADV: 2A FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:05/07/2026
SPE2DP-26-T-3246 NSN/Part Number: 6505-01-657-2003 Quantity: 3 PG Purchase Request: 7016620723QTY: 6 Delivery: 20 days ADO