Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on April 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

LIDOCAINE, PATCH

Awarded
SPE2DP-26-T-3189Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

AI Contract Overview

Show more

Lidocaine Patch 5% is a prescription-only adhesive patch containing 700 mg of lidocaine in an aqueous base, delivered at a strength of 5% (50 mg per gram of adhesive), designed for topical application to intact skin to relieve pain associated with post-herpetic neuralgia. Each patch measures 10 cm by 14 cm and is to be applied no more than three times per 24-hour period, with each application limited to a maximum duration of 12 hours. The product must be stored at controlled room temperature between 20°C and 25°C (68°F to 77°F), and exposure to water such as during bathing, swimming, or showering must be avoided as it may compromise adhesion. The unit of issue is a package containing 30 individually sealed, child-resistant patches. Packaging and labeling must strictly comply with Medical Marking Standard No. 1, superseding MIL-STD-129, with all containers sealed to protect against damage and ensure safe transport under commercial standards. The product carries a non-extendable shelf life of 24 months under RS016 for TYPE I (CODE M) items. As a hazardous material under FED-STD-313, it must be packaged per TQ requirement IP025 and accompanied by Safety Data Sheets (SDS) compliant with OSHA’s Hazard Communication Standard (29 CFR 1910.1200), including GHS-aligned labels submitted for approval prior to award. Supplier employees must be trained on these requirements. The medication is regulated by the FDA, and contractors must ensure all labeling and markings meet these standards, including barcoding as required by MMS No. 1. Delivery is FOB destination with a 20-day delivery window, targeting two locations: USS ROSS DDG 71 in FPO AE 09586 and Fort Bragg, North Carolina. The contract requires electronic invoicing via WAWF, and performance must adhere to all DLA technical and quality requirements, which supersede ASTM D3951. The procurement is issued under solicitation SPE2DP-26-T-3189 with a response deadline of May 6, 2026, and applicable clauses include cybersecurity safeguards under 252.204-7012, whistleblower protections, and compliance with the System for Award Management. Suppliers must

General Info

Lidocaine patch 5% for post-herpetic neuralgia, max 3 daily, 12 hours each, 24-month shelf life, FOB destination, DLA compliance.

Contract Value

$512.73

NAICS

424210 - Drugs and Druggists' Sundries Merchant Wholesalers

Place of Performance

UNIT 100308 BOX 1, FPO, AE, 09586, USA

Set-Aside

NONE

Award Issued Date

Documents

1

RFQ SPE2DP-26-T-3189 Medical Supply Chain Pharma

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhaseAwarded
Posted

Solicitation

Notice updated

The notice description changed.

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN PHARM FSA
Contacts1 person available
OfficeUSA
Office AddressUSA
Contacts

Full Description

Show more
LIDOCAINE,PATCH
LIDOCAINE,PATCH.
RX ONLY. EACH ADHESIVE PATCH CONTAINS 700 MG
OF LIDOCAINE (50 MG PER GRAM ADHESIVE) IN AN
AQUEOUS BASE. INDICATED FOR RELIEF OF PAIN
ASSOCIATED WITH POST-HERPETIC NEURALGIA. IT
SHOULD BE APPLIED ONLY TO INTACT SKIN. APPLY
LIDOCAINE PATCH 5% TO INTACT SKIN TO COVER
THE MOST PAINFUL AREA. APPLY THE PRESCRIBED
NUMBER OF PATCHES (MAXIMUM OF 3), ONLY ONCE
FOR UP TO 12 HOURS WITHIN A 24-HOUR PERIOD.
PATCH SIZE 10 CM × 14 CM, ROUTE OF
ADMINISTRATION CUTANEOUS, DOSE FORM ADHESIVE
PATCH, MEDICATED STRENGTH 5 %;700 MG OVER
12 HOURS
.
UNIT OF ISSUE IS A PACKAGE (OR CARTON)
CONTAINING 30 EACH (INDIVIDUALLY SEALED
PATCHES OR CHILD-RESISTANT ENVELOPES).
.
STORE AT 20° TO 25°C (68° TO 77°F) [SEE USP
CONTROLLED ROOM TEMPERATURE]. LIDOCAINE
PATCH 5% MAY NOT STICK IF IT GETS WET.
AVOID CONTACT WITH WATER, SUCH AS BATHING<(>,<)>
SWIMMING OR SHOWERING.
.
LABELING AND MARKING MUST IN ACCORDANCE WITH
MEDICAL MARKING STANDARD NO. 1C.
.
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description. Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
SPE2DP-26-T-3189
SECTION B
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html RS016: Shelf-life requirement RS001 for a TYPE I (CODE M) item with a shelf life of 24 months (non-extendable) applies to this item.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO contact@example.gov. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SHALL BE MARKED IAW THE LATEST EDITION OF
THE MEDICAL MARKING STANDARD NO. 1.
MMS NO. 1 IS AVAILABLE ONLINE AT:
https://www.dla.mil/Logistics-Operations/Packaging/
YARAL PHARMA INC 9D9C5 P/N NDC82347-0505-05 AVKARE LLC 4QGW8 P/N NDC42291-0495-30 AMNEAL PHARMACEUTICALS OF NEW YORK, LLC 557X3 P/N NDC65162-0791-08 GSMS INC 7A8G1 P/N NDC51407-0827-30 AMERISOURCEBERGEN DRUG CORP 1XUY5 P/N NDC00591-3525-30
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE2DP-26-T-3189
SECTION B
PR: 7016573875 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016573875 0001 PG 4.000
NSN/MATERIAL:6505016572003
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
V21945
USS ROSS DDG 71
UNIT 100308 BOX 1
FPO AE 09586
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
V21945
USS ROSS DDG 71
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) V219456119HM70
RDD: 777
PROJ: EP5 TP 3
SUPP ADD: YNHM01 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 11
SPE2DP-26-T-3189
SECTION B
PR: 7016573875 PRLI: 0001 CONT’D
DIC: A4A DIST: 9B ADV: 2A FC: S7
Need Ship Date:00/00/0000 Original Required Delivery Date:05/04/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7016584415 0001 PG 5.000
NSN/MATERIAL:6505016572003
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W91KBP
0003 SF BN 01 CO A SUSTAINMEN
3D SFG SSA AWCF SSF
5234 EAGLE TALON DR BLDG X3063
FORT BRAGG NC 28310
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W91KBP
SPE2DP-26-T-3189
SECTION B
PR: 7016584415 PRLI: 0001 CONT’D
0003 SF BN 01 CO A SUSTAINMEN
3D SFG SSA AWCF SSF
5234 EAGLE TALON DR BLDG X3063
FORT BRAGG NC 28310
US
MARKFOR
W91KBP
0003 SF BN 01 CO A SUSTAINMEN
3D SFG SSA AWCF SSF
5234 EAGLE TALON DR BLDG X3063
FORT BRAGG NC 28310
US
M/F: (TCN) W91KBP61070065
RDD: 121
PROJ: TP 3
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A0A DIST: V ADV: 2A FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:05/04/2026
SPE2DP-26-T-3189 NSN/Part Number: 6505-01-657-2003 Quantity: 4 PG Purchase Request: 7016573875QTY: 4 Delivery: 20 days ADO

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN PHARM FSA

Same awarding agency

NAICS: 423450
New
DIBBS
SODIUM CHLORIDE INJECT
Solicitation # SPE2DP-27-T-0167
Solicitation SPE2DP-27-T-0167 is a Request for Quotations issued by the DLA Troop Support Medical Supply Chain Pharm FSA for the procurement of Sodium Chloride Injection. The required product consists of 10 ML preservative-free, latex-free dispensing syringes, packaged in trays of 30 syringes per unit of issue. This FDA-regulated drug is classified as a Type I Code M item with a non-extendable shelf life of 24 months. The solicitation includes multiple contract line items for delivery to various locations, including Fort Bliss, Texas, and Fort Bragg, North Carolina, with a required delivery period of 20 days and an original required delivery date of October 27, 2026. The contract mandates strict adherence to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and requires commercial packaging per ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials. Palletization must comply with DLA packaging requirement RP001. Terms are FOB Destination, with inspection and acceptance also occurring at the destination. Offerors must submit quotes via the DIBBS system and are encouraged to provide quantity ranges. This acquisition is not a small business set-aside and falls under NAICS code 423450. Payment and invoicing are to be processed electronically through the Wide Area WorkFlow system.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 12 hours ago

DEADLINE

in 5 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS