Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

LIFE PRESERVER ACCE

Active
SPE4A1-26-T-2526Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicitation SPE4A1-26-T-2526 for four LIFE PRESERVER ACCE units under NSN 4220-01-559-7376 requires strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with compliance governed by the revision in effect on the solicitation issue date. Packaging, identification, and inspection protocols must conform to DLA requirements including the removal of government identification from non-accepted supplies, bare item marking, and inspection at origin. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes must be verified at assigned levels of VII, IV, and II for critical, major, and minor characteristics. Cybersecurity compliance mandates CMMC Level 2, either through self-assessment or third-party certification, while technical data associated with the item is subject to ITAR or EAR export controls, necessitating prior government authorization for any disclosure to foreign persons, including employees of U.S. subsidiaries. Access to controlled data is restricted to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. Item Unique Identification is waived per the service customer’s request under DFARS 252.211-7003(c)(1)(i), and delivery is required within 79 days of award to New Cumberland, Pennsylvania. The solicitation closes on August 13, 2026, with Vincent Williams of the DLA Aviation Supply Chain as the primary point of contact.

General Info

Four LIFE PRESERVER ACCE units due in 79 days, CMMC Level 2, ITAR/EAR controlled, zero defects required.

Agency

Department Of Defense → AVIATION SUPPLY CHAINView Agency

NAICS

326299 - All Other Rubber Product ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A1-26-T-2526 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Vincent Williams
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
LIFE PRESERVER ACCE
LIFE PRESERVER ACCE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State
SPE4A1-26-T-2526
SECTION B
or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 4220-01-559-7376 Quantity: 4 EA Purchase Request: 7016645467QTY: 4 Delivery: 79 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326299
New
DIBBS
Cellular Rubber Sheet Manufacturing & SupplyThe contract requires the manufacture and supply of cellular rubber sheeting at a thickness of 1/16 inch, specifically designed to be asbestos-free and compliant with the SAE AMS3195H specification. The material must also adhere to military packaging and marking standards to ensure proper handling, identification, and logistics integration within defense supply chains. The product is intended for use in applications where consistent physical properties, durability, and safety are critical, and the absence of asbestos ensures compliance with current health and environmental regulations. The solicitation is issued as a subcontract under the NAICS code 326299 for other rubber product manufacturing, and the place of performance is tied to Cherry Point, North Carolina with a zip code of 28533-5040. The opportunity was posted on August 5, 2026, and responses are due by August 17, 2026, providing potential suppliers with a twelve-day window to submit proposals. The sponsoring agency is part of the Department of Defense, operating under the Cherry Point Phantom Rd Bldg designation, indicating this requirement is part of a broader military logistics or maintenance initiative. Full details and submission guidelines are accessible via the provided DIBBS portal link.
CHERRY POINT PHANTOM RD BLDG

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 326299
New
DIBBS
Medical Tubing Manufacturing & AssemblyThe contract entails the manufacture and assembly of ventilator oxygen supply tubing identified by NSN 6515015803532, adhering strictly to military specifications. The work includes extrusion, precise cutting, rigorous quality control processes, and comprehensive traceability documentation to ensure full compliance with defense standards. All production activities must meet the exacting requirements for material integrity, dimensional accuracy, and sterility, with documented evidence maintained throughout the supply chain to support military operational readiness. Performance is required at Fort Campbell, Kentucky, with a response deadline set for August 11, 2026. The contract is classified as a subcontract under NAICS code 326299, managed by the Department of Defense through the Medical Supply Chain MD Surg FSF. The focus is on delivering a critical medical component for ventilator systems, ensuring timely, defect-free production and full traceability to uphold the safety and reliability of military medical equipment.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 326299
New
DIBBS
Rubber Block Supply (NSN: 9320015656471)
DLA DIST SAN JOAQUIN

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 326299
New
DIBBS
Supply of Medical Recording Paper for Monitor Defibrillators (PROPAQ MD/X Series)The contract requires the manufacture or supply of medical-grade recording paper specifically designed for use with ZOLL PROPAQ MD and X series monitor defibrillators, delivered in 6-roll boxes to meet exact technical compatibility standards. All products must adhere to strict commercial packaging and labeling guidelines, ensuring proper identification, handling, and traceability throughout the supply chain. The delivery must be fulfilled to a Defense Logistics Agency destination with a FPO address, and the entire order must be completed and dispatched within 20 days of contract award, emphasizing time-sensitive fulfillment critical to medical operations. The solicitation, issued under the Department of Defense’s Medical Supply Chain, falls under NAICS code 326299 and is classified as a subcontract opportunity. It was posted on August 5, 2026, with a response deadline of August 11, 2026, indicating a brief procurement window for qualified suppliers. While no set-aside designation is specified, the requirement is targeted toward vendors capable of producing defense-compliant medical consumables under tight logistical constraints. The order is destined for a military medical support location, underscoring the operational importance of consistent, reliable paper supply for life-saving diagnostic and monitoring equipment in deployed settings.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 326299
New
DIBBS
Rubber Strip Manufacturing and SupplyThe contract requires the manufacture and delivery of 900,500 units of Rubber Strip identified by NSN 9320004978597, adhering strictly to military and federal specifications, including all relevant part standards and hazardous materials reporting obligations as applicable. The supplier must ensure full compliance with technical and regulatory requirements to meet the operational needs of the Department of Defense. This is a subcontract set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, under NAICS code 326299, with a response deadline of August 17, 2026. The place of performance is designated as Robins Air Force Base, Georgia, 31098-1887, and the contracting activity is managed by the Warner Robins office of the Department of Defense. The solicitation is accessible via the DIBBS platform, and bidders must submit proposals prior to the deadline to be considered for award.
WARNER ROBINS

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 326299
New
DIBBS
Supplier of Nonmetallic Special Shaped Sections (Seals/Gaskets) to ASTM D2000The contract requires the supply of nonmetallic special shaped sections including seals, gaskets, and molded rubber components that must fully comply with ASTM D2000 M3 BE610 A14 E014 F19 specifications, ensuring dimensional accuracy, material properties, and performance under operational conditions. All items must be properly packaged and labeled in accordance with industry standards and must adhere to hazardous materials communication requirements, including appropriate labeling, safety data sheets, and handling instructions to ensure safe transportation and use. The items are intended for use within Department of Defense operations, specifically designated for performance at Tinker Air Force Base, with a ZIP code of 73145-8000. The solicitation is classified as a subcontract under NAICS code 326299, which refers to other rubber product manufacturing, and was posted on August 5, 2026, with a response deadline set for August 17, 2026. There is no set-aside designation specified, and the contracting entity is the Construction & Equipment MRO SVC I under the Department of Defense. All submissions must be delivered through the DIBBS platform using the provided UI link, and no point of contact information is listed in the posting. Suppliers must ensure full technical compliance with the referenced ASTM standard and all regulatory requirements related to hazardous materials to be considered for award.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 326299
New
DIBBS
Nonmetallic Special-Shaped Seal ManufacturingThe contract calls for the precision manufacturing of nonmetallic special-shaped seals adhering strictly to Department of Defense technical specifications and material standards, with mandatory compliance to MIL-DTL-117 for waterproof, greaseproof, and opaque packaging applications. Production must meet exacting quality and performance benchmarks to ensure reliability in demanding operational environments, and all components must be fabricated using approved nonmetallic materials that fulfill the required physical and chemical properties. The work is issued as a subcontract under a Women-Owned Small Business Set-Aside, with the North American Industry Classification System code 326299 indicating classification under other plastics product manufacturing. The solicitation was posted on August 5, 2026, with responses due by August 20, 2026, and the contracting authority is the Strategic Acquisition Program Directorate within the Department of Defense. All work is to be performed in accordance with federal procurement guidelines, and the full details are accessible through the DIBBS portal via the provided link.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 326299
New
DIBBS
Solid Rubber Sheeting Supply
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 326299
New
DIBBS
Precision O-Ring Manufacturing – Synthetic Rubber (MS29513-116)The contract requires the manufacture of preformed synthetic rubber O-rings to meet military specification SAE AS29513 with part number MS29513-116 and NSN 5331002483850, ensuring full compliance with DFARS regulations and MIL-STD packaging and marking standards. The components are critical for fluid handling applications and must adhere to exacting dimensional, material, and performance criteria defined by the military specification to guarantee reliability in demanding operational environments. The solicitation is classified as a subcontract under NAICS code 326299 and is issued by the Fluid Handling Division of the Department of Defense, with performance required at the specified location in Texarkana, Texas, 75507-5000. The opportunity was posted on August 5, 2026, and responses are due by August 17, 2026. All submissions must align with the government’s procurement guidelines and be delivered via the designated DIBBS portal to be considered valid.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 326299
New
DIBBS
Supply of Pneumatic Vehicular Tires
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 326299
New
DIBBS
RUBBER SHEET, CELLULAR
Solicitation # SPE8E5-26-T-3910
The contract specifies the procurement of rubber sheet, cellular, under NSN 9320-01-665-3250, with a required quantity of five feet to be delivered within five days of order placement. Delivery is FOB origin, with inspection and acceptance points at the destination, and a quantity variance allowance of plus 10 percent and minus zero percent. The product must conform to ASTM D6576-20 Revision 20 dated July 1, 2020, and all technical and quality requirements from the DLA Master List of Technical and Quality Requirements prevail over any referenced ASTM standards. Packaging must comply with ASTM D3951 and be marked and labeled per MIL-STD-129, with palletization following DLA Packaging Requirements for Procurement. The material must be shipped via traceable means, excluding parcel post, to the designated delivery address in Corpus Christi, Texas, under RDD/NCMS shipment protocols. The unit of issue is feet, with a total contract value of $5.00, and the purchase request number is 7017354655. The contract is issued under solicitation SPE8E5-26-T-3910, with a response deadline of August 17, 2026, and is managed by the Defense Logistics Agency. Government-specific identifiers and markings apply, and the item is subject to Covered Defense Information protocols. The original required delivery date is July 6, 2026.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 326299
New
DIBBS
RUBBER SHEET, SOLID
Solicitation # SPE8E5-26-T-3880
The contract solicits 35 sheets of solid rubber, identified by NSN 9320-01-158-6557, under solicitation number SPE8E5-26-T-3880, with a response deadline of August 17, 2026, and a delivery requirement of 30 days after award. The product must comply with technical and quality standards referenced through R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must adhere to DLA specifications, and any non-accepted supplies must have government identification removed prior to return. Full and open competition is authorized, and the procurement is conducted in accordance with a military or federal specification. The contracting activity is managed by the Department of Defense through the San Diego office, with performance location at 92136-3581, and the point of contact is Joel Dalafave, reachable via email and phone provided. The NAICS code is 326299, indicating the industry classification for the product category.
SAN DIEGO

POSTED

1 day ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN

Same awarding agency

NAICS: 484220
New
DIBBS
Government Logistics and FOB Origin Shipment Coordination
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
Quality Inspection and First Article Testing (FAI)
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 323113
New
DIBBS
Military-Compliant Packaging and Labeling Services
Commercial Screen Printing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Precision Fastener Manufacturing – Machine Bolts
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
Quality Certification and Testing (CoQC)The contract titled Quality Certification and Testing (CoQC) requires the performance of mechanical testing and inspections to ensure compliance with origin inspection requirements and adherence to ISO 9001:2015 quality management standards. The primary deliverable is the issuance of a Certificate of Quality Compliance, affirming that all tested materials and components meet the specified technical and quality criteria. This is a subcontract under the Department of Defense’s Aviation Supply Chain, with performance required at the facility located in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on August 5, 2026, and responses must be submitted by August 13, 2026, with the North American Industry Classification System code 541380 indicating it falls under Other Scientific and Technical Consulting Services. All activities must support the integrity of defense-related supply chain components through rigorous, documented testing protocols and certified quality outcomes.
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541620
New
DIBBS
Hazard Communication and Labeling ComplianceThe contract requires the provision of comprehensive hazard communication documentation and the application of compliant labeling for hazardous material packaging, specifically aligning with OSHA Hazard Communication standards and MIL-STD-129 requirements. All deliverables must ensure proper identification, labeling, and communication of chemical hazards to meet federal safety and logistics protocols, with a focus on accurate and durable label application across all packaged materials. This subcontract is part of the Department of Defense’s Aviation Supply Chain initiative and is performance-focused on a designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation, classified under NAICS code 541620, is open for responses until August 13, 2026, and was posted on August 5, 2026. While there is no set-aside designation specified, the work is positioned as a subcontract within a broader Defense Department procurement framework. All work must adhere strictly to regulatory standards for hazard communication, ensuring safe handling, storage, and transportation of hazardous substances throughout the supply chain. The contract is accessible through the DIBBS system via the provided URL for full submission details and requirements.
Environmental Consulting Services

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 331111
New
DIBBS
Nickel Alloy 400 (Monel) Raw Material SupplyThe contract seeks the supply of Nickel Grade 400, also known as Monel, in bar stock or billet form, meeting the QQ-N-281D, Class A specification, exclusively for use in the manufacturing of defense fasteners. The material must comply with stringent quality and compositional standards required for high-performance aerospace and defense applications, ensuring structural integrity and corrosion resistance under extreme operational conditions. Delivery is expected to occur at the designated place of performance in New Cumberland, Pennsylvania, with the zip code 17070-5002 serving as the primary logistical point. The contract is classified as a subcontract under NAICS code 331111, indicating its alignment with the primary metal manufacturing sector, and is issued by the Department of Defense through its Aviation Supply Chain division. The solicitation was posted on August 5, 2026, with a firm response deadline of August 13, 2026, allowing potential suppliers a limited window to submit proposals. The procurement is part of a broader effort to secure critical raw materials for defense manufacturing, emphasizing reliability and compliance with federal specifications. All submissions must be directed through the DIBBS platform via the provided web link, with no set-aside provisions listed, making it open to qualified vendors regardless of business size or certification status.
Iron and Steel Mills

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining of Continuous Thread StudsThe contract calls for the manufacture of 20 units of a Type IV Continuous Thread Stud designated by NSN 5307015956281, adhering strictly to MIL-DTL-1222J specifications. Each stud must feature 3/4-10 UNC 2A threading and a precise length of 10.750 inches, ensuring full compliance with military-grade dimensional and performance standards. The work is classified as a subcontract under NAICS code 332710, indicating precision machining activities, and is managed by the Aviation Supply Chain within the Department of Defense. The solicitation was posted on August 5, 2026, with a response deadline set for August 13, 2026. Performance of the contract is designated to take place in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The contract opportunity is accessible via the DIBBS platform under the reference code SPE4A126T2527, and no specific set-aside classification applies, meaning it is open to all eligible contractors without restrictions based on business size or type.
Machine Shops

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
LEVER, PILOT ESCAPE
Solicitation # SPE4A1-26-T-2482
The contract pertains to the procurement of a Lever, Pilot Escape item identified by NSN 1560-00-915-7605 and part number 65207-01031-103, with a total quantity of four units to be delivered under solicitation SPE4A1-26-T-2482. Manufacturing must utilize a metal casting process requiring specialized tooling, and sourcing details for tooling and materials are to be obtained from DLA’s Aviation or Land & Maritime Supply Chains teams. The item is designated as a critical application component, and compliance with stringent technical and quality standards from the DLA Master List of Technical and Quality Requirements is mandatory, superseding standard commercial packaging norms. Item unique identification is not required, but all packaging must adhere to MIL-STD-129 and DLA packaging requirements including RP001, with hazardous material handling governed by FED-STD-313 and TQ requirement IP025 if applicable. Acceptance occurs at destination with no variance allowed in quantity, and delivery is due 171 days after award, with an original required delivery date of August 21, 2027. Sampling must follow the alternative plan per Sikorsky Corporation’s QAP 1201, meeting or exceeding ASQ H1331 or MIL-STD-1916 standards. The contractor must also perform a CMMC Level 2 self-assessment for cybersecurity compliance and remove any government identification from non-accepted supplies. All deliveries must be shipped FOB origin to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with specific packaging, labeling, and palletization instructions strictly enforced.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
STUD, PLAIN
Solicitation # SPE4A1-26-T-2518
The contract is for the procurement of 31 plain studs identified by NSN 5307-00-262-6583 and part number AN126000, classified as a commercial item under solicitation SPE4A1-26-T-2518. Delivery is required within 47 days of contract award with FOB origin terms, and inspection and acceptance occur at the manufacturer’s facility. The item must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including RQ001 for tailored higher-level quality standards and RQ009 for inspection and acceptance at origin. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001 guidelines, and all markings must conform to RQ017 for physical identification. Sampling is governed by MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise specified, and critical attributes are subject to the most stringent verification levels. The contract enforces strict compliance with the TDP Revision A General 4 standards referenced under AN125951 through AN126274 Revision 2 and QAP 77445 MQR-PSD-1 Revision 2. The unit of issue is each (EA), with no quantity variance allowed—exactly 31 units must be delivered. The delivery destination is Tinker AFB, Oklahoma, and all shipments must follow DLA Transportation Procurement Notes C19 and C20. The need ship date is September 30, 2026, with an original required delivery date of June 25, 2026. The contract is subject to Covered Defense Information requirements under RD003, and government identification must be removed from non-accepted supplies per RQ011. Pricing is fixed at $31.00 per unit, totaling $961.00, and all documentation must align with DLA’s authorized unit of issue standards. Point of contact for inquiries is Jade Stringfield, with full solicitation details available through the DIBBS system.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335131
New
DIBBS
INDICATOR, LIGHT
Solicitation # SPE4A1-26-T-2517
The contract pertains to the procurement of two Indicator, Light units identified by NSN 6210-00-462-1047 and Lockheed Martin part number 4L97503-143B, with a total quantity of two units to be delivered in 170 days FOB origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, and must comply with MIL-STD-2073-1E packaging standards, MIL-STD-129 marking specifications, and DLA packaging guidelines. Sampling procedures must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are to be classified with defined verification levels or AQLs. Configuration changes require formal engineering change proposals or variance requests, and the supplier must manage cybersecurity compliance via CMMC Level 2 self-assessment. Physical identification of the item must follow RQ017 requirements, and government identification must be removed from non-accepted supplies. Deliveries are to be made to DLA Distribution Warner Robins at Robins Air Force Base, Georgia, with no variance allowed in quantity. The contract includes strict packaging and marking instructions including a fragile designation and specific internal and external container codes, and transportation instructions are governed by DLA procedural notes. The solicitation was issued on August 5, 2026, with a response deadline of August 13, 2026, under NAICS code 335131, and is managed by the Department of Defense’s Aviation Supply Chain.
Residential Electric Lighting Fixture Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A1-26-T-2525
This contract specifies the procurement of three shear bolts identified by NSN 5306-01-366-2782 and part number NAS6406U52H, manufactured to the current revision of NAS6403 through NAS6420 Revision 15 dated July 29, 2022, with all hardware produced after the solicitation date required to meet the latest standard revision. The item is classified as a critical application item requiring critical item source inspection and adherence to stringent quality conformance standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other referenced documents. Inspection of all Class 3A and 3B threads must conform to System 22 of FED-STD-H28/20 excluding small internal and external threads, with verification levels set at VII, IV, and II for critical, major, and minor attributes or AQLs of 0.1, 1.0, and 4.0 respectively. Sampling must follow MIL-STD-1916 or a comparable zero-based plan with zero non-conformances required unless otherwise specified. The manufacturer must provide a Certificate of Quality Compliance and ensure physical identification per MIL-STD-130N, including manufacturer logos, lot numbers, and material markings. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization as defined in DLA Packaging Requirements for Procurement, and delivery is FOB origin with no variance allowed in quantity. Inspection and acceptance occur at origin, and the item must be delivered within 250 days of contract award with a required ship date of April 21, 2027. Casting or forging may be necessary for production, and due to potential absence of government tooling, suppliers must submit a Casting and Forging Assistance Request if needed. The contract contains covered defense information and applies tailored higher-level quality requirements to both manufacturers and non-manufacturers. All technical data, including drawings, quality assurance provisions, and CDRLs, must be reviewed through the Technical Data Package, and the item is designated as a commercial item of a type. Shipments must be addressed to the DLA Distribution Center in New Cumberland, Pennsylvania, and transportation directives are governed by DLAD Proc Notes C19 and C20.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details