Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

LIGHT, BED

Active
SPE4A6-26-T-12DSFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the supply of 53 units of a bed lighting fixture identified by NSN 6230-01-678-2140 and purchase request 7017740932, with a unit price of $53.00 and a total contract value of $2,809. Delivery is required within 171 days from the contract date, FOB origin, with inspection and acceptance occurring at the destination. All items must comply with MIL-STD-2073-1E for preservation and packaging, marked per MIL-STD-129 with the special fragile marking code 01, and palletized according to DLA packaging standards. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware or supplies, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents specifically authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary as mandated by NAVSEA 5100-003D. Additionally, mercury is forbidden in preservation, packaging, and marking materials. Sampling and quality verification follow MIL-STD-1916 or ASQ Z1.4 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract incorporates technical and quality requirements from the DLA Master List and references specification MIL-DTL-16377/17C for technical documentation. The delivery destination is the DLA Distribution San Joaquin warehouse in Tracy, California, with a required ship date of January 31, 2027, and the original delivery date set for January 30, 2027.

General Info

53 bed lighting fixtures, $53 each, delivery by Jan 31, 2027, FOB origin, strict mercury and packaging rules.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335139 - Electric Lamp Bulb and Other Lighting Equipment ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-12DS.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
VICTORIA BURCHAM
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
LIGHT,BED
FIXTURE,LIGHTING
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-DTL-16377/17C REVISION NR C DTD 05/26/2023 PART PIECE NUMBER: M16377/17-231.1SSL
SPE4A6-26-T-12DS
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017740932 0001 EA 53.000
NSN/MATERIAL:6230016782140
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:D
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:01 -01 Fragile
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
SPE4A6-26-T-12DS
SECTION B
PR: 7017740932 PRLI: 0001 CONT’D
TRACY CA 95304-5000
US
Need Ship Date:01/31/2027 Original Required Delivery Date:01/30/2027
SPE4A6-26-T-12DS NSN/Part Number: 6230-01-678-2140 Quantity: 53 EA Purchase Request: 7017740932QTY: 53 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335139
New
DIBBS
DRIVER, LIGHT EMMIT ING
Solicitation # SPE4A6-26-T-12EP
The contract pertains to the procurement of a Light Emitting Diode Driver identified by NSN 6210016189748 and part number 7017740032, with a total quantity of 266 units to be delivered FOB origin under solicitation SPE4A6-26-T-12EP. Delivery is required within 171 days from the contract award, with a specified need ship date of January 31, 2027, and an original required delivery date of May 11, 2027. Acceptance and inspection occur at the destination, and no quantity variance is permitted. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit containment standards, with marking following MIL-STD-129 and no special marking codes applied. Palletization adheres to DLA packaging requirements, and the final delivery point is the DLA Distribution facility in New Cumberland, Pennsylvania. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except for functional applications in batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents as outlined by NAVSEA. Portable lamps or instruments containing mercury must be shockproof and feature a secondary containment boundary per NAVSEA 5100-003D. The procurement is subject to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Transportation logistics follow DLA Procurement Notes C19 and C20, and all documentation aligns with DoD unit of issue standards. The contracting office is the ASC Commodities Division under the Department of Defense, with primary point of contact Shenika Thompson.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335139
New
DIBBS
FLASHLIGHT
Solicitation # SPE8E7-26-Q-0281
The contract pertains to the procurement of four commercial off-the-shelf flashlights with the NSN 6230-01-613-4312 and part number 14513 from STREAMLIGHT INC, issued under solicitation SPE8E7-26-Q-0281 by the Defense Logistics Agency. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions in effect as of the solicitation or award date depending on the acquisition type, and these take precedence over all other standards including ASTM D3951. Packaging must comply with DLA Packaging Requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous materials following TQ requirement IP025 per FED-STD-313 and non-hazardous items requiring commercial packaging under ASTM D3951; palletization must adhere to RP001. The item has zero variance in quantity, with inspection and acceptance occurring at destination under FOB origin terms, and delivery is due within 60 days after the award date. Transportation instructions reference DLAD PROC NOTES C19 and C20, with the final destination being USS GEORGE H W BUSH CVN 77 in Norfolk, Virginia. The unit of issue is each, and the contract includes requirements for the removal of government identification from non-accepted supplies and potential application of covered defense information controls. The government procurement request number is 7016908733, with a mandatory ship date of May 15, 2026.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335139
New
DIBBS
FIXTURE, LIGHTING
Solicitation # SPE4A6-26-T-12EE
The contract specifies the procurement of four lighting fixtures under NSN 6210-01-618-2034 with a delivery deadline of 171 days after order. The solicitation number is SPE4A6-26-T-12EE, issued by the Department of Defense’s ASC Commodities Division, with performance located in Tracy, California, 95304-5000. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must comply with applicable revisions based on the solicitation or award date. Packaging must meet DLA standards, and government identification must be removed from non-accepted supplies. Inspection and acceptance occur at the manufacturer’s origin, subject to tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 unless otherwise directed, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in samples unless the contract states otherwise. The item contains technical data subject to ITAR or EAR export controls, making unauthorized disclosure to foreign persons—even within the U.S.—a violation. Only contractors with approved JCP certification, completed DLA export control training, and authorized access may handle such data. DFARS 252.225-7048 applies, and covered defense information is strictly controlled. The solicitation was posted August 4, 2026, with responses due by August 12, 2026.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335139
New
DIBBS
LAMPHOLDER
Solicitation # SPE4A6-26-T-12BC
The contract pertains to the procurement of a lampholder under solicitation SPE4A6-26-T-12BC, with a requirement for 28 units delivered FOB origin within 171 days, with no variance allowed in quantity. The item is identified by NSN 6250-01-500-6927 and must comply with DLA packaging and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. All supplies must be free of intentionally added mercury or mercury-containing compounds, except for specific functional uses such as fluorescent lamps, sensors, or instrument controls, with portable fluorescent lamps requiring shock-proof construction and a secondary containment barrier as per NAVSEA 5100-003D. Sampling and inspection follow zero-defect acceptance criteria under MIL-STD-1916 or equivalent zero-based plans, with attributes classified by verification levels AQLs. Packaging must adhere to RP001 DLA requirements, with unit packaging specified using code U and intermediate container codes, and palletization aligned with DLA standards. Delivery is directed to Industries of the Blind Inc in Greensboro, NC, with inspection and acceptance occurring at the destination. The contract specifies that the supplier must be identified by prime technology LLC or TH-CONTACT INC part numbers and adhere to all technical, quality, and labeling directives without exception.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335139
New
DIBBS
LAMP, INCANDESCENT
Solicitation # SPE4A6-26-R-XC18
This contract is for the procurement of 690 incandescent lamps under the NSN 6240-00-583-3334, classified as a commercial off-the-shelf item. The solicitation, identified as SPE4A6-26-R-XC18, was posted on August 4, 2026, with responses due by August 19, 2026, and requires delivery within 65 days after award. The acquisition is structured as a total small business set-aside under FAR 19.5, meaning only small businesses are eligible to compete. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the scale of the acquisition. Packaging must comply with DLA standards, and any non-accepted supplies must have all government identification removed prior to return. The contracting activity is the ASC Commodities Division of the Department of Defense, with Kymberley Ferguson as the primary point of contact, reachable via email and phone. The performance location and organization address details are unspecified, though the country code is listed as the United States.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335139
New
DIBBS
LANTERN, ELECTRIC
Solicitation # SPE4A6-26-T-12DF
The contract pertains to the procurement of four electric lanterns, identified by NSN 6230-01-664-0628 and part number SYM 101.3L-SMOD from COMSACO, LLC, under solicitation SPE4A6-26-T-12DF. The delivery is due within 171 days from the award date, with a required ship date of January 31, 2027, and an original delivery deadline of March 30, 2027. All items must be delivered FOB origin, with no tolerance for quantity variance, and inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E, using preservative method 10, dry climate, and unit containers E5, with marking adhering to MIL-STD-129 and including the special fragile marking code 01. Palletization follows DLA packaging requirements, and the shipment is addressed to DLA Distribution San Joaquin in Tracy, California. The contract incorporates technical and quality standards referenced via R and I numbers from the DLA Master List, including MIL-STD-1916 or comparable zero-based sampling plans for inspection, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0. Unspecified attributes are treated as major unless otherwise defined. Sampling allows for either attribute or variable inspection at the manufacturer’s discretion, but acceptance requires zero non-conformances unless explicitly modified. Physical identification of the lanterns must satisfy RQ017 requirements, and covered defense information under RD003 may apply. The unit of issue is each, priced at $4.00 per unit, with total contract value of $16.00. All provisions are governed by the DLA master revision effective on the solicitation issue date or award date, depending on acquisition type.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335139
New
DIBBS
BALLAST, LAMP
Solicitation # SPE8E7-26-Q-0276
The contract pertains to the procurement of 30 units of BALLAST, LAMP with NSN 6250-01-420-7257 under solicitation SPE8E7-26-Q-0276, issued by the Defense Logistics Agency. The requirement is priced on a Firm Fixed Price basis with no variance allowed in quantity, and delivery must be completed within 90 days after award. Inspection and acceptance both occur at the destination, with FOB origin terms applying. All packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001), with DLA Master List of Technical and Quality Requirements taking precedence over any other standards. The supplier is Industries of the Blind Inc., located in Greensboro, NC, and the shipment is to be sent to UY8614 at the same address. The item is designated for government use with a material need ship date of November 16, 2026, and the purchase request number is 7017446199. The solicitation was posted on August 4, 2026, with responses due by August 11, 2026, and is classified under NAICS code 335139. For transportation and freight details, DLAD Proc Notes C19 and C20 apply. Technical and quality specifications referenced in the contract are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335139
New
DIBBS
FLASHLIGHT
Solicitation # SPE8E7-26-Q-0277
The contract pertains to the procurement of 3 units of a commercial off-the-shelf flashlight identified by NSN 6230-01-613-4312 and part number 14513 from STREAMLIGHT INC, with delivery required within 60 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with packaging strictly adhering to RP001, MIL-STD-129, and either FED-STD-313 or ASTM D3951 depending on whether the item is classified as hazardous. The unit of issue is each, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Shipment must be FOB origin, with transportation and delivery details directed to USS GEORGE H W BUSH CVN 77 at Norfolk, VA via designated DLA procedures. Packaging and palletization must comply fully with DLA standards, and all markings must include proper government identification unless otherwise instructed by RQ011. The item is subject to Covered Defense Information requirements under RD003, and all vendor actions must reference the contract number SPE8E7-26-Q-0277 and corresponding VSM codes. The government’s material need date is May 7, 2026, and the solicitation was issued on August 4, 2026, with responses due by August 11, 2026.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335139
New
DIBBS
LAMP, INCANDESCENT
Solicitation # SPE8E7-26-T-3456
The contract is for the procurement of 10 incandescent lamps with NSN 6240-00-905-8505 under solicitation SPE8E7-26-T-3456, issued by the Defense Logistics Agency on behalf of the Department of Defense. Delivery is required within 10 days after award, with the response deadline set for August 17, 2026. The item must comply with DLA packaging and technical requirements incorporated by reference, including MIL-STD-1916 or ASQ H1331 for sampling, where zero non-conformances are required unless otherwise specified, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively or with AQLs of 0.1, 1.0, and 4.0. The manufacturer’s symbol must be marked directly on the item’s surface and must be registered in MIL-HDBK-57, with exceptions for small fasteners under 0.190 inches in thread diameter, and no markings are permitted on bearing surfaces. Packaging must clearly identify exterior shipping containers only, and covered defense information may apply. The contract is fully competitive and governed by federal specifications, with the official drawing referenced available via DIBBS during the solicitation period. The place of performance is Camp Lejeune, North Carolina, with Kelly Mitchell designated as the primary point of contact.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335139
New
DIBBS
SEARCHLIGHT
Solicitation # SPE4A6-26-T-11WL
The contract pertains to the procurement of a commercial off-the-shelf (COTS) luminator item identified by part number 923-425-00 and NSN 6230-01-286-7449, with a total quantity of three units to be delivered FOB origin within 171 days. The item is classified as a critical application component with no shelf life requirement, and it must comply with all applicable DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to DLA’s RP001 requirements and MIL-STD-129 labeling guidelines, with hazardous material handling governed by TQ requirement IP025 if applicable. Delivery is directed to DLA Distribution Cherry Point in North Carolina, with inspection and acceptance occurring at the destination, and no variance in quantity is permitted. The contract, issued under solicitation SPE4A6-26-T-11WL, is a Total Small Business Set-Aside under NAICS code 335139, with required documentation including source approval requests and compliance with covered defense information controls. The original delivery date is November 4, 2027, with a need-by date of January 31, 2027, and the contract specifies unit pricing and total pricing as part of the CLIN structure. All transportation logistics follow DLA procedural notes C19 and C20.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335139
New
DIBBS
FLOODLIGHT, ELECTRIC
Solicitation # SPE4A6-26-T-11MF
The contract specifies the procurement of 12 electric floodlights identified by NSN 6230-01-261-4886 and part number MC3-LO-WF-120-277-50K-B2-NMIL, classified as a commercial off-the-shelf item from Phoenix Products LLC. The delivery must occur within 84 days from the contract award, with goods to be shipped FOB origin and inspected and accepted at the destination. The unit of issue is each, with no tolerance for quantity variance. Packaging must comply with MIL-STD-129 and either ASTM D3951 for non-hazardous materials or TQ requirement IP025 if classified hazardous under FED-STD-313, with all DLA Master List of Technical and Quality Requirements taking precedence. Palletization is governed by RP001, and all packaging must be properly marked and labeled per federal standards. The delivery destination is DLA District San Joaquin at 25600 S Chrisman Road, Tracy, CA 95304-5000, with the required delivery date set for August 3, 2026. The procurement falls under a total small business set-aside, solicitation number SPE4A6-26-T-11MF, with a response deadline of August 11, 2026, and is issued by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335139
New
DIBBS
FLOODLIGHT, ELECTRIC
Solicitation # SPE8E7-26-T-3368
The contract solicitation SPE8E7-26-T-3368 issued by the Defense Logistics Agency calls for the procurement of 10 electric floodlights identified by NSN 6230017175158 and part number NSR-2166R from Bayco Products Incorporated DBA 3GLY4. The items must be delivered within 20 days after award to the Field Maintenance Shop in Johnston, Iowa with FOB Origin terms and no quantity variance permitted. All packaging and labeling must adhere to MIL-STD-129 for marking and barcoding, and commercial packaging for non-hazardous items must comply with ASTM D3951 unless superseded by stricter DLA Master List of Technical and Quality Requirements, which take precedence. Hazardous materials must be packaged per TQ Requirement IP025 in accordance with FED-STD-313 and labeled in compliance with the Hazard Communication Standard. Palletization must follow RP001 DLA Packaging Requirements for Procurement, and shipments must be transmitted via traceable means excluding parcel post. The contract is fixed-price and includes numerous FAR and DFARS clauses covering compliance with equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, hazardous material identification, cybersecurity safeguards including NIST SP 800-171 assessment requirements, and restrictions on the acquisition of Chinese military company items. Payment must be processed electronically through Wide Area WorkFlow, and all deliverables will be inspected and accepted at the destination. Offerors must possess a valid Unique Entity ID and provide representations regarding small business status, joint ventures, or other socioeconomic categories if applicable. The solicitation was issued on July 21, 2026, with a response deadline of August 6, 2026, and must be submitted via the DLA Internet Bid Board System. The Contracting Officer is Kelly Mitchell, and no alternate pricing or options are specified beyond the base quantity. Supply performance is contingent on strict adherence to all packaging, labeling, and regulatory standards, with non-compliance resulting in rejection at destination.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance and Assessment Support
Computer Systems Design Services

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541611
New
DIBBS
Supply Chain Traceability and Documentation Management
Administrative Management and General Management Consulting Services

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) and Production Lot Testing (PLT) Services
Testing Laboratories and Services

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
Manufacturing and Supply of Critical Safety Item (CSI)
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-12LQ
This contract pertains to the procurement of retaining rings identified by NSN 5325-01-269-2248, with a quantity of 290 units to be delivered FOB origin within 171 days. The requirement is governed by stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with packaging and marking mandated to comply with MIL-STD-2073-1E and MIL-STD-129. Packaging must adhere to DLA-specific guidelines, including prohibited use of mercury or mercury-containing compounds in preservation, packaging, and marking, except for enumerated functional applications such as batteries, fluorescent lamps, and approved instruments, which must additionally feature shock-proof design and a secondary containment barrier in accordance with NAVSEA 5100-003D. The contract explicitly prohibits the intentional introduction of mercury into any supplied hardware. Delivery is to be made to the DLA Distribution San Joaquin receiving warehouse in Tracy, California, with no variance permitted in quantity. The item is flagged as a critical application, and documentation for source approval must meet specified requirements. The solicitation was issued under contract number SPE4A6-26-T-12LQ with a response deadline in August 2026, and the primary point of contact is Marchello Fields from the ASC Commodities Division.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-11PM
This contract specifies the procurement of 3,776 machine screws identified by NSN 5305-00-054-5636 and part number MS51957-2, manufactured to the current revision of MIL-STD or industry consensus standards, with all items produced after the solicitation date required to meet the latest version of the governing specification. The items are classified as commercial and subject to tailored quality requirements including inspection and acceptance at origin, with zero non-conformances mandated in sampling under MIL-STD-1916 or equivalent zero-based plans. Critical attributes are verified at the highest level, and unspecified features are treated as major. The screws must not contain or come in direct contact with mercury or mercury compounds except under specific exemptions for functional components like batteries or sensors, and portable devices containing mercury must have shock-proof design and secondary containment as per NAVSEA 5100-003D. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation methods including drying and protective materials, and marking adhering strictly to MIL-STD-129 without special codes. Mercury is prohibited in preservation and packing materials. Items are to be delivered FOB origin in 146 days to Warner Robins AFB, Georgia, with no tolerance for quantity variance. The supplier must ensure physical identification is applied per MIL-STD-130N, and all hardware must be traceable with manufacturer logos, lot numbers, and material markings. Transportation and shipping instructions reference DLA procedural notes, and all contractual requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-11RF
This contract pertains to the procurement of a quick-release pin identified by NSN 5315-00-575-5740, with a required quantity of 184 units to be delivered FOB origin within 171 days, with no variance allowed in quantity. All items must conform strictly to the current revision of the part standard SPE4A6-26-T-11RF Section B, and previous revisions are only acceptable for hardware manufactured prior to the solicitation date. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures adhering to MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The item is classified as a critical application and must undergo inspection and acceptance at the manufacturer’s origin. Mercury and mercury-containing compounds are prohibited unless essential for functional components such as batteries, fluorescent lamps, sensors, or weapon systems, and where used, portable devices must include a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Palletization follows DLA packaging standards, and delivery is directed to DLA Distribution San Joaquin in Tracy, California. The contract enforces full compliance with defined standards, prohibits intentional contamination with hazardous substances, and mandates original delivery by January 31, 2027, despite the original required date of December 17, 2026.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING SE
Solicitation # SPE4A6-26-T-11ZR
The contract specifies the procurement of an Electrical Insulation Sleving Set with part number LNCL-12-140-CK-N and NSN 5970015164430, quantity of 60 kit units, under solicitation SPE4A6-26-T-11ZR. The item is subject to stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, including mandatory Item Unique Identification (IUID) in compliance with MIL-STD-130, and must be packaged and marked per MIL-STD-2073-1E and MIL-STD-129 with special shelf life marking code 32. The item is classified as a Critical Application Item with a non-extendable shelf life of 60 months, requiring strict adherence to preservation and packaging standards. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the item or its packaging, except for functional uses in batteries, lamps, or instruments as specifically authorized by NAVSEA. Sampling must follow MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances required unless otherwise stated. The item must be procured in lengths divisible by 10 feet and delivered FOB origin within 171 days to the DLA Distribution facility in New Cumberland, PA, with a delivery deadline of January 31, 2027, despite the original required date being May 5, 2028. No quantity variance is permitted, and inspection and acceptance occur at destination, with all documentation and compliance governed by DFARS and DLA procedural notes.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-12FD
The contract pertains to the procurement of seven radio frequency cable assemblies with the NSN 0001S00000061, issued under solicitation SPE4A6-26-T-12FD with a response deadline of August 12, 2026, and a delivery requirement 261 days after award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the size of the acquisition. Packaging, identification, and removal of government markings from non-accepted items must comply with specific DLA directives, including RQ011 and RP001. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the item must conform to RQ017, and source approval documentation must adhere to RC001. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; access is limited to contractors with approved US/Canada Joint Certification Program certification, completed DLA training, and formal authorization. The place of performance is Greensboro, North Carolina, and primary point of contact is Traci Beaudoin at DLA.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-11TF
The contract is for 158 units of socket head cap screws with NSN 5305-01-032-9232, issued under solicitation SPE4A6-26-T-11TF by the Department of Defense’s ASC Commodities Division. The unit of issue is each (EA), with a fixed unit price and total price based on the documented quantity; no variance is permitted in the delivered quantity. Delivery is required within 217 days of award, with FOB origin terms meaning the contractor assumes responsibility for shipment from the point of origin. Inspection and acceptance both occur at the destination warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000. Packaging must comply with MIL-STD-2073-1E, including preservation method 10, dry climate conditions, and no mercury or mercury compounds permitted in any packaging materials. Marking must adhere to MIL-STD-129 with no special marking required, and palletization must follow DLA’s RP001 packaging standards. The parcel post and freight shipping addresses are identical, directing delivery to Recipient Warehouse 57. The original required delivery date is April 7, 2027, with a need ship date of March 18, 2027. Transportation instructions reference DLA procedural notes C19 and C20. The contract was posted on August 4, 2026, with responses due by August 12, 2026, and is classified under NAICS 332722 for machinery manufacturing. Primary point of contact is Lisa Harvie, reachable via phone or email provided.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-11PN
The contract is for the procurement of 820 retaining rings identified by NSN 5325-00-187-9033 under solicitation SPE4A6-26-T-11PN, classified as a commercial item and procured through a fully competitive process. The item must comply with the current revision of its defining military or consensus non-government part standard, with prior versions accepted only for hardware manufactured before the solicitation date. Quality assurance requirements are governed by MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Sampling must result in zero non-conformances unless otherwise allowed by the contract, and manufacturers may choose between attribute or variable inspection methods under MIL-STD-1916. The item is subject to DLA’s master list of technical and quality requirements, with revisions controlled by the solicitation issue date for simplified acquisitions. Identification marking must adhere to MIL-STD-130N dated 16 November 2012, and government identification must be removed from non-accepted supplies. Delivery is due within 171 days of award, with performance at Hill AFB, Utah, and the primary point of contact is Carl Younce at DLA.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, PLAIN, SPHER
Solicitation # SPE4A6-26-T-12LE
This contract specifies the procurement of 14 spherical plain bearings under NSN 3120-01-576-6374 and part number 5136L017-1 from Circor Aerospace, Inc. DBA 50601, with delivery required within 264 days FOB origin. The item is classified as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including tailored higher-level quality standards applicable to both manufacturers and non-manufacturers. Packaging, preservation, and marking must conform to MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129, with specific preservation methods determined by bearing type and closure, as outlined in referenced tables and paragraphs. Protective lubricants and preservation controls are dictated by bearing specifications, and the contractor’s packaging facility must meet quality assurance verification criteria. Unit of issue is each, with zero tolerance for quantity variance, and inspection and acceptance occur at destination. Item Unique Identification is not required per customer request, and all marking must follow specified standards without special codes. The solicitation number is SPE4A6-26-T-12LE, issued by the ASC Commodities Division of the Department of Defense, with a response deadline of August 12, 2026, and performance location at Hill AFB, Utah.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details