Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

LIGHT EMITTING DIOD

Active
SPE4A6-26-T-11DYFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one light emitting diode with NSN 5980-01-669-2413, issued under solicitation SPE4A6-26-T-11DY by the Department of Defense’s ASC Commodities Division. Delivery is required within 20 days after contract award, and the solicitation closed on August 10, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific clauses addressing packaging, removal of government identification from non-accepted items, tailored higher-level quality standards for manufacturers and non-manufacturers, and physical identification markings on bare items. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in the sample unless otherwise stated. The item contains technical data subject to ITAR or EAR export controls, forbidding any disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to this data is restricted to contractors with approved U.S./Canada Joint Certification Program certification, completion of mandatory DOD export control training, and formal approval from DLA. The place of performance is Virginia Beach, Virginia, with Berkeley Vaughan designated as the primary point of contact.

General Info

Procurement of one LED NSN 5980-01-669-2413 for delivery in 20 days, subject to ITAR/EAR and strict quality sampling requirements.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332321 - Metal Window and Door ManufacturingView NAICS

Place of Performance

2155 11TH STREET, VIRGINIA BEACH, VA, 23459-3018, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-11DY for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Berkeley Vaughan
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
LIGHT EMITTING DIOD
LIGHT EMITTING DIOD
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the
SPE4A6-26-T-11DY
SECTION B
Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5980-01-669-2413 Quantity: 1 EA Purchase Request: 7017493163QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332321
New
DIBBS
Precision Metal Forging and Stamping for Weapon System Access DoorThe contract calls for the manufacture of a precision metal access door specifically designed for integration into a weapon system, with stringent requirements aligned to military specifications for material strength, dimensional accuracy, and surface finish. The work involves either developing or utilizing specialized tooling to meet these exacting standards, ensuring both functional reliability and performance under operational conditions. Production must adhere to the NAICS code 332321, indicating a focus on forgings and stampings, and the item will be delivered to the designated performance location at Fort Riley with a postal code of 66442-0000. This is a subcontract opportunity posted by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, with submissions due by August 10, 2026. The solicitation is open to qualified suppliers capable of delivering high-integrity metal components under tight tolerances, and while no set-aside provisions are specified, bidders must be prepared to demonstrate technical competence in precision metal forging and stamping processes. The contract is part of a broader effort to sustain and enhance critical defense systems through reliable, specification-compliant component manufacturing.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332321
New
DIBBS
Defense Component Manufacturing – Vehicular Bow FabricationThe contract entails the manufacture of a vehicular bow component adhering to strict military specifications, covering all phases from material sourcing to final dimensional inspection. The work includes precision welding, forming, and quality assurance processes necessary to meet defense-grade standards, ensuring structural integrity and operational reliability under demanding conditions. The component is destined for use in military vehicle systems and must comply with all technical and compliance requirements outlined by the Department of Defense. The solicitation is classified as a subcontract under NAICS code 332321 and is managed by LSO COMBAT VEHICLES AND ARMAMENT, with performance required at Tracy, California, zip code 95304-5000. Offers must be submitted by August 13, 2026, with the opportunity posted on August 2, 2026. The contract is open to qualified subcontractors without a specific set-aside designation, and all proposals must align with the technical and delivery expectations established for defense-related fabrication. Further details and submission instructions are available via the DIBBS portal under solicitation number SPE7L426T5955.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332321
New
DIBBS
DOOR, ACCESS, WEAPON SYS
Solicitation # SPE4A7-26-T-605F
The contract is for one unit of a door, access, weapon system with NSN 5342-01-106-8147, under solicitation SPE4A7-26-T-605F, with a response deadline of August 10, 2026, and a required delivery within ten days of award. Manufacturing may involve casting or forging operations requiring specialized tooling not held by the government, necessitating engagement with the DLA Casting and Forging Assistance program for sourcing support. The technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. The item is subject to export control under either ITAR or EAR, restricting disclosure of technical data to foreign persons regardless of location, with compliance governed by DFARS 252.225-7048. Access to controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of DOD export control training, and formal DLA authorization. Performance is designated to Fort Riley, Kansas, with primary point of contact Jamiah Sutton at the Defense Logistics Agency.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332321
New
DIBBS
Locking Sleeve for Electrical Connector – Manufacturing and SupplyThe contract requires the manufacture and supply of six units of locking sleeves for electrical connectors identified by NSN 5935-01-666-8618, with strict adherence to military specification standards to ensure performance and reliability in operational environments. Each unit must be properly packaged and labeled according to federal and defense logistics requirements to facilitate seamless integration into existing supply chains. The delivery timeline is firm, with all items expected to be completed and shipped no later than 125 days after contract award, emphasizing the need for efficient production planning and quality control throughout the manufacturing process. This is a subcontract under the Department of Defense’s Active Devices Division, classified under NAICS code 332321 for other electrical equipment and component manufacturing. The solicitation was posted on July 31, 2026, with responses due by August 15, 2026, indicating a competitive procurement window of approximately two weeks. Although specific point of contact information and place of performance are not provided, the contract is managed through the DLA Dibbs platform, requiring potential suppliers to review all technical and logistical details via the official URL to ensure full compliance with procurement guidelines and contractual obligations.
ACTIVE DEVICES DIVISION

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 332321
New
Federal
Supply of High-Impact Hurricane Roller Curtain DoorThe contract calls for the supply of one Alpine Redi Storm 60 PSF rolling hurricane door featuring a stainless steel finish, hand-chain operation, and a 20,000-cycle spring capacity, specifically designated for use at a naval facility in Japan. The product must meet stringent durability and performance standards to ensure protection against extreme weather events in a high-risk marine environment, with the hand-chain mechanism providing reliable manual operation in the event of power failure or system disruption. The 20,000-cycle spring rating indicates a long service life under repeated use, critical for a military installation requiring consistent operational readiness. This is a subcontract under a Small Business Set Aside classification, meaning only eligible small businesses may respond, and it is governed under NAICS code 332321 for metal door and window manufacturing. The solicitation was posted on July 31, 2026, with a response deadline set for August 7, 2026, allowing for a one-week window for potential vendors to submit proposals. The contracting activity is managed by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the Department of Defense, indicating the procurement is part of a larger defense infrastructure initiative. The place of performance is in Japan, requiring the vendor to account for international shipping, compliance with local and defense regulations, and potential customs or logistical challenges in delivering and installing the unit.
Navsup Flt Logistics Ctr Puget Sound

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 332321
New
Federal
2040 - ROLLER CURTAIN DOOR
Solicitation # N0040626Q0452
The solicitation titled 2040 - ROLLER CURTAIN DOOR, with solicitation number N0040626Q0452, is a Small Business Set Aside total opportunity issued by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the Department of Defense. Responsible sources may submit quotes, bids, or proposals by the deadline of August 7, 2026, at 8:00 PM Eastern Time, following the guidelines outlined in RFO 12.203. Evaluation will consider technical factors including delivery date, price, and past performance, with no single factor assigned relative importance; the government will select the most advantageous offer based on the combined merit of these criteria. The North American Industry Classification System code is 332321, and the solicitation is open exclusively to small businesses meeting the set-aside criteria. All submissions must be directed to the designated point of contact, Stacia DeBriae, via email at stacia.l.debriae.civ@us.navy.mil, and performance is expected to be fulfilled at the agency’s location in Bremerton, Washington, 98314-5100.
Navsup Flt Logistics Ctr Puget Sound

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 332321
New
DIBBS
Precision Fabrication of Weapon Access DoorThe contract calls for the precision fabrication of a single weapon access door meeting stringent military specifications, with strict requirements for dimensional accuracy, material compliance, and structural integrity to ensure performance under operational conditions. The work must be executed to exact technical standards, emphasizing quality control and adherence to defense-grade engineering protocols. Awarded under a subcontract category and identified by NAICS code 332321, the effort is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance required at Mechanicstown, Pennsylvania, zip code 17050-2411. The solicitation was posted on July 30, 2026, and responses are due by August 7, 2026, with all submissions expected to align with the unique capabilities and compliance expectations of a defense-related manufacturing environment.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 332321
New
DIBBS
Precision Metal Fabrication of Mounting BracketsThe contract entails the precision metal fabrication of 628 or more mounting brackets to fulfill military specifications, requiring advanced manufacturing processes including CNC machining, welding, and surface finishing in strict compliance with DLA technical standards. Each component must adhere to exacting quality controls to ensure structural integrity and functionality under operational conditions, with all work performed to satisfy Department of Defense requirements. The production must be completed within the constraints of the subcontract’s performance window, with final delivery targeted to meet established military logistics timelines. The work is to be performed at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and falls under NAICS code 332321 for metal forging and stamping. The solicitation was posted on July 30, 2026, with a firm response deadline of August 10, 2026, indicating a tight turnaround for qualified subcontractors to submit proposals. This opportunity is structured as a subcontract under the Land Supply Chain organization, and although no set-aside designation is specified, all bidders must demonstrate capability to meet stringent defense manufacturing criteria, including documentation, traceability, and inspection protocols required by DLA.
LAND SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 332321
New
DIBBS
Hex Cap Screw SupplyThe contract calls for the manufacture or supply of four units of hexagon head cap screws compliant with DLA RA001 specifications, encompassing all necessary packaging, labeling, and delivery requirements. The items must be delivered to Tobyhanna, Pennsylvania, with the ZIP code 18466-5050 designated as the place of performance. The solicitation is classified as a subcontract under the NAICS code 332321, which corresponds to screw, nut, and bolt manufacturing. The offering organization is the ASC Commodities Division within the Department of Defense, and the proposal must be submitted by the response deadline of August 7, 2026. The solicitation was posted on July 30, 2026, and interested parties can access further details via the provided DIBBS portal link.
ASC COMMODITIES DIVISION

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 332321
New
DIBBS
RAMP SKIN PANEL Manufacturing and SupplyThe contract requires the manufacture, inspection, packaging, marking, and delivery of five RAMP SKIN PANEL units designated by NSN 1560LLNCB1542, all of which must fully comply with military standards and Defense Logistics Agency requirements. The work is to be performed in San Diego, California, with a strict delivery timeline tied to the contract's response deadline of August 7, 2026, following a July 30, 2026 posting date. The contract falls under the NAICS code 332321, indicating it is a subcontract related to forgings and stampings, and is managed by the Department of Defense through DLA Fleet Readiness Southwest. All deliverables must meet rigorous quality and documentation standards expected by DLA, with no set-aside provisions specified, meaning any qualified bidder may respond, and performance must be completed at the designated place of performance in San Diego.
DLA FLEET READINESS CT SOUTHWEST DLA

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 332321
New
DIBBS
Flat Washer Supply (NSN: 5310015135434)The contract requires the manufacture or supply of 5,745 flat washers identified by NSN 5310015135434, adhering strictly to federal specifications for material, dimensions, and performance. All items must be properly packaged and labeled in accordance with government standards, ensuring traceability and compliance throughout the supply chain. Delivery is to be made FOB origin to the Defense Logistics Agency facility in New Cumberland, Pennsylvania, with the recipient being the ASC Commodities Division under the Department of Defense. The solicitation was posted on July 30, 2026, with responses due by August 7, 2026, and is classified as a subcontract under NAICS code 332321, which pertains to screw, nut, and bolt manufacturing. There is no set-aside designation specified, and the contract is open to qualified suppliers meeting all technical and logistical requirements.
ASC COMMODITIES DIVISION

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 332321
New
DIBBS
Manufacture of Electric Light Globes (MIL-DTL-16377K Compliant)The contract awards the full manufacturing of 209 electric light globes compliant with MIL-DTL-16377K specifications, requiring strict adherence to military-grade standards including hermetic sealing to ensure durability and performance under demanding conditions. Full materials traceability is mandatory throughout the production process, and all units must be packaged according to military packaging requirements to guarantee integrity during transport and storage. The contract is structured as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses are eligible to bid, as defined by the SBA and FAR 19.5. The North American Industry Classification System code 332321 confirms the scope aligns with electrical lighting equipment manufacturing. Performance is required at the designated facility in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026, with the acquiring agency identified as the Nuclear Reactor Program within the Department of Defense.
NUCLEAR REACTOR PROGRAM

POSTED

4 days ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 561910
New
DIBBS
Compliance Packaging and Marking ServicesThe contract requires the packaging and labeling of finished fasteners in strict compliance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring all procedures meet Department of Defense requirements for uniformity, durability, and traceability. This includes proper hazard communication labeling in accordance with applicable regulations and the integration of traceable shipping information to support accountability across the supply chain. The work must be performed to guarantee full military readiness and logistical compatibility, with all packages prepared for seamless integration into defense distribution systems. The contract is classified as a subcontract under NAICS code 561910, issued by the ASC Commodities Division of the Department of Defense, with performance located in Groton, Connecticut, at ZIP code 06340-4905. Interested parties must submit responses by the deadline of August 10, 2026, with the solicitation publicly accessible via the DIBBS portal. While no set-aside designation is specified, the requirement demands precise adherence to technical specifications and rigorous documentation to ensure compliance with federal military packaging and marking protocols.
Packaging and Labeling Services

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
Testing and Certification ServicesThe contract requires the performance of slow strain rate tensile testing and liquid penetrant inspection on fasteners, with all results documented in certified reports issued by an accredited laboratory. These tests are critical for evaluating material integrity and detecting surface discontinuities under controlled conditions, ensuring compliance with stringent military and aerospace standards. The work must be completed at or delivered to the designated place of performance in Groton, Connecticut, with a delivery deadline of August 10, 2026. All testing methodologies and reporting must adhere to recognized industry and accreditation protocols to guarantee validity and traceability. The contract is structured as a subcontract under NAICS code 541380, managed by the ASC Commodities Division of the Department of Defense, and is aimed at sourcing qualified technical services to support defense material assurance programs.
Testing Laboratories and Services

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 331492
New
DIBBS
Specialized Material Supply – NICUAL GR-500 AlloyThe contract calls for the supply of NICUAL GR-500 alloy complying with the QQ-N-286 Rev G specification, requiring complete chemical and mechanical traceability with full mill certification for every batch delivered. This is a subcontract under the Department of Defense’s ASC Commodities Division, with performance obligated at Groton, Connecticut, where all materials must be delivered and verified. The solicitation was posted on August 2, 2026, with_responses due by August 10, 2026, and is classified under NAICS code 331492, indicating specialized metal product manufacturing. The material must meet exacting standards for composition and mechanical properties, with documentation ensuring accountability throughout the production and delivery chain, and all shipments are subject to rigorous compliance checks prior to acceptance.
Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Precision Fastener Manufacturing – Socket Head Cap ScrewsThe contract requires the manufacture, testing, certification, and delivery of a single socket head cap screw compliant with strict military specifications covering material composition, thread format, and self-locking functionality. The item must be produced to exacting defense standards, ensuring it meets performance, durability, and safety requirements for critical applications. All phases of production—including quality assurance and certification—must be documented and verified to confirm adherence to the referenced military requirements. The opportunity is a subcontract under the Department of Defense’s ASC Commodities Division, with performance taking place in Groton, Connecticut, at a zip code of 06340-4905. It was posted on August 2, 2026, and responses are due by August 10, 2026. The North American Industry Classification System code is 332722, identifying it as related to screw, bolt, and nut manufacturing. There is no set-aside designation, and the contract is accessible via the DLA Dibbs portal for interested vendors to review full details and submit proposals.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 484220
New
DIBBS
Transportation and Delivery to Tracy, CA (FOB Origin)The contract requires the secure transport of finished cable assemblies from the manufacturer to the DLA Distribution Depot in Tracy, California, under FOB Origin terms, meaning the buyer assumes responsibility for the goods once they leave the seller’s location. This includes managing secure handling procedures and maintaining full chain-of-custody tracking throughout the transportation process to ensure accountability and prevent loss or tampering. The delivery destination is clearly identified as the Tracy facility with a zip code of 95304-5000, and the work falls under NAICS code 484220, which classifies it as a freight transportation service. The contract is structured as a subcontract and was posted on August 2, 2026, with proposals due by August 10, 2026, under the oversight of the ASC Commodities Division within the Department of Defense. All activity must comply with federal logistics standards and be executed in alignment with the specified security and documentation protocols.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 811211
New
DIBBS
Quality Inspection and Acceptance SupportThe contract requires performance of origin-based quality inspections in accordance with ASQ Z1.4 and AQL standards, specifying critical defect limits at 0.1, major defects at 1.0, and minor defects at 4.0. All inspections must be thoroughly documented and supported to facilitate government acceptance, ensuring compliance with stringent quality benchmarks. The work is scoped as a subcontract under the Department of Defense’s ASC Commodities Division, with performance to occur at a designated location in Tracy, California, with a postal code of 95304-5000. The solicitation was posted on August 2, 2026, with responses due by August 10, 2026, and it is classified under NAICS code 811211, indicating a focus on repair and maintenance services. Participation is open without specific set-aside restrictions, and all activities must align with federal acceptance protocols for delivered commodities.
Consumer Electronics Repair and Maintenance

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 561910
New
DIBBS
Packaging and Labeling Services for Government ShipmentThe contract requires specialized packaging, marking, and labeling services fully compliant with MIL-STD-2073-1E, RP001, and applicable hazardous material regulations for government shipments. All work must adhere strictly to Department of Defense standards to ensure safe, secure, and traceable handling of critical materials throughout the supply chain. Services are to be performed at the designated place of performance in Tracy, California, with the zip code 95304-5000, and must meet all federal requirements governing the preparation and documentation of military cargo. This subcontract, solicited under the NAICS code 561910, is issued by the ASC Commodities Division of the Department of Defense and is open for response until August 10, 2026. The posting date is August 2, 2026, allowing potential vendors eight days to submit proposals. The contract is not subject to any specific set-aside designation, and interested parties must access the official solicitation through the provided DIBBS portal to review full requirements and ensure alignment with all technical, regulatory, and logistical directives before submitting a bid.
Packaging and Labeling Services

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
Special-Purpose Electrical Cable Assembly ManufacturingThe contract requires the manufacture of four special-purpose electrical cable assemblies identified by NSN 6150-01-424-8044, all produced in strict compliance with military specifications. This includes full production, rigorous quality assurance protocols, and adherence to hazardous materials regulations to ensure safety and operational readiness. The work must be completed to exact technical standards expected for defense-related components, with no tolerance for deviations in design, materials, or performance. The solicitation is issued as a subcontract under the North American Industry Classification System code 334419, reflecting the specialized nature of electrical equipment manufacturing. It is managed by the ASC Commodities Division under the Department of Defense, with performance required at a facility located in Tracy, California, 95304-5000. Interested parties must submit responses by the deadline of August 10, 2026, following the guidelines outlined on the official DIBBS platform, with no information provided regarding set-aside status or small business preferences.
Other Electronic Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Precision Manufacturing of Defense-Grade Close Tolerance ScrewsThe contract requires the manufacture, inspection, packaging, and delivery of five defense-grade close tolerance screws with NSN 5305-01-513-8897, adhering strictly to DLA Master List specifications and MIL-STD-1916 zero-defect quality standards. All work must be performed to ensure the highest level of dimensional precision and reliability, typical for critical military applications, with full traceability and documentation at every stage of production and quality control. The screws are intended for use in high-stakes defense systems where failure is not an option, and all processes must align with military-grade compliance protocols. The solicitation is issued as a subcontract under NAICS code 332722, with a response deadline of August 10, 2026, and a posted date of August 2, 2026. The place of performance is designated as San Diego, California, with the contract administered by the ASC Commodities Division of the Department of Defense. While no specific set-aside designation is provided, all bidders must meet rigorous defense manufacturing criteria and be capable of fulfilling the exacting technical and logistical demands within the specified timeframe and location. The contract seeks a supplier with proven expertise in high-precision fastener production for government defense programs.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
Specialized Material and Component SupplyThe contract entails the supply of specialized components and preservation materials critical for handling mercury-containing parts, with strict adherence to NAVSEA 5100-003D standards and the PRESV MAT:ZZ specification. The required items include shock-proof enclosures designed to ensure safe transportation and storage of sensitive hazardous materials, underscoring the need for robust engineering and compliance with military-grade safety protocols. All submitted materials must meet exacting technical criteria to guarantee compatibility, durability, and regulatory compliance in defense-related applications. The solicitation is issued as a subcontract under the NAICS code 335999, directed by the ASC COMMODITIES DIVISION within the Department of Defense, with performance required at NEW CUMBERLAND, PA, zipcode 17070-5002. The opportunity was posted on August 2, 2026, and responses are due by August 10, 2026. No set-aside classification or agency-specific procurement preferences are indicated, and bidders must ensure full technical alignment with the referenced standards without reliance on external documentation or file references. The contract is accessible via the DIBBS portal for detailed submission requirements.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Safety Data ManagementThe contract requires full compliance with OSHA’s Hazard Communication Standard 29 CFR 1910.1200 for all hazardous materials used in the production and handling of defense hardware. This includes the authoritative preparation and maintenance of Safety Data Sheets for each chemical substance involved, ensuring accurate hazard identification, risk communication, and regulatory adherence across the supply chain. Hazard labeling must be implemented precisely according to GHS standards, covering containers, work areas, and any materials transferred or stored during manufacturing or logistics operations. All activities must be performed in alignment with Defense Department protocols under the ASC Commodities Division, with performance centered at the New Cumberland location, zip code 17070-5002. The solicitation, issued as a subcontract under NAICS code 541690, demands timely submission by the August 10, 2026 deadline, and is structured to support ongoing defense hardware programs where chemical safety and regulatory integrity are critical to operational readiness and worker protection.
Other Scientific and Technical Consulting Services

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
First Article and Production Lot Testing (FAT/PLT) ServicesThe contract requests accredited First Article and Production Lot Testing services to ensure full compliance with specified drawings and contractual requirements, including the submission of detailed test reports and supporting compliance photos. The work is designated under NAICS code 541380 and is classified as a subcontract, with performance required at New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on August 2, 2026, with responses due by August 10, 2026, and is managed by the ASC Commodities Division under the Department of Defense. All testing must be conducted by accredited laboratories, and deliverables must meet stringent documentation standards to validate adherence to technical specifications.
Testing Laboratories and Services

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details