Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

LIGHT, INDICATOR

Active
SPE4A6-26-T-07CTFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of LIGHT, INDICATOR items under solicitation SPE4A6-26-T-07CT, with a total quantity of 13 units at a unit price of $13.00, for a total contract value of $169.00. The item is identified by NSN 6210-01-510-3085 and must be delivered FOB origin within 238 days from the contract award, with delivery scheduled for March 20, 2027. Inspection and acceptance occur at the destination, and the quantity variance is strictly zero percent, allowing no over or under shipment. Packaging must comply with MIL-STD-2073-1E, including preservation methods, packaging materials, and unit container specifications, while marking adheres to MIL-STD-129 with the special fragile marking code 01. Palletization follows DLA packaging requirements, and mercury or mercury-containing compounds are strictly prohibited in preservation, packaging, packing, and marking, except for functional uses in specified devices like batteries or fluorescent lamps, which must include a secondary containment barrier per NAVSEA 5100-003D. Sampling procedures for quality verification must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise stated, and attributes are classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Measuring and test equipment must be calibrated and documented per RT001, and documentation for source approval requests is required under RC001. Physical identification and bare item marking must be in accordance with RQ017. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Delivered items must be shipped to the specified DLA warehouse address in Tracy, California, and transportation logistics are governed by DLAD Proc Note C19 and C20. The contract was posted on July 16, 2026, with a response deadline of July 24, 2026, and is managed by the Department of Defense’s ASC Commodities Division, with Bradley Willis as the primary point of contact.

General Info

13 light indicator units at $13 each, FOB origin, delivery by March 20, 2027, zero variance, MIL-STD packaging, no mercury.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-07CT DLA Aviation Jul 17 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Bradley Willis
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
LIGHT,INDICATOR
LIGHT, INDICATOR
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
IDENTIFY TO:
SAMPLING DATA:
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RT001: MEASURING AND TEST EQUIPMENT
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
CRITICAL APPLICATION ITEM
ROCKWELL AUTOMATION INC 4H047 P/N 800H-QRH10G
AQUA-CHEM, INC. 0EXU3 P/N 881-07835-000
ROCKWELL AUTOMATION, INC. 01121 P/N 800H-QRH2G
SPE4A6-26-T-07CT
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017529430 0001 EA 13.000
NSN/MATERIAL:6210015103085
DELIVERY (IN DAYS):0238
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:01 -01 Fragile
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
SPE4A6-26-T-07CT
SECTION B
PR: 7017529430 PRLI: 0001 CONT’D
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:03/20/2027 Original Required Delivery Date:10/14/2026
SPE4A6-26-T-07CT NSN/Part Number: 6210-01-510-3085 Quantity: 13 EA Purchase Request: 7017529430QTY: 13 Delivery: 238 days ADO

Similar Contracts

NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, FIBEThe contract specifies the procurement of a Cable Assembly, FIBE, under solicitation SPE4A6-26-T-07LB, with a delivery requirement of 564 days after the delivery order, and a total quantity of six units to be delivered FOB ORIGIN to the designated warehouse in Tracy, California. The item is identified by NSN 5995-01-576-3913 and must comply with stringent technical and quality standards, including the DLA Master List of Technical and Quality Requirements referenced via R and I numbers. Quality assurance mandates adherence to ISO 9001:2015 for both manufacturers and non-manufacturers, along with tailored higher-level requirements covering packaging, item marking, and government identification removal. Sampling follows MIL-STD-1916 or comparable zero-based plans with zero non-conformances required for acceptance, and critical, major, and minor attributes are defined with corresponding verification levels and AQLs. Packaging must meet MIL-STD-2073-1E with preservation method 10 (cleaning and drying), and all labeling and marking must conform to MIL-STD-129 without special markings. The item has no shelf life requirement, and unit identification is not mandated per customer request, with DFARS 252.211-7003(c)(1)(i) applicable. Cybersecurity compliance requires a CMMC Level 2 self-assessment and implementation of NIST SP 800-171 controls, including mandatory reporting of cyber incidents. Hazardous materials must be labeled under OSHA’s Hazard Communication Standard, with Safety Data Sheets submitted pre-award, and all shipments must adhere to DLA packaging guidelines. The contractor must comply with clauses requiring workforce protections against trafficking, employment eligibility verification, whistleblower rights notification, and restrictions on former DoD official compensation. The contract requires electronic submission via DIBBS by July 24, 2026, with acceptance at destination and invoicing through WAWF. No unit price or total contract value is provided, and the contract type remains unspecified. All performance and delivery obligations are subject to the terms of FAR and DFARS clauses, including changes, subcontracting, and safeguarding of covered defense information.
ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
STRIP, SHORTINGThe contract solicitation SPE7M5-26-T-334M seeks 31 units of STRIP, SHORTING with NSN 5999-01-699-5632 under a fixed-price arrangement, with delivery required 227 days from the award date to the destination at 2083 NORMANDY DRIVE, DOOR 113 TO 134, NEW CUMBERLAND, PA 17070-5002. FOB ORIGIN applies, meaning title and risk transfer to the government upon delivery at the contractor’s facility, and inspection and acceptance occur at the destination. Packaging must conform to MIL-STD-2073-1E with preservation method 10 using clean/dry procedures, no preservation or wrapping materials, and no cushioning; unit and intermediate containers are E5, with a pack code of U and optional packaging instruction M. Marking must comply with MIL-STD-129 using no special marking code, and barcoding must be implemented via standardized military formats such as GS1-128 or Data Matrix. Palletization must adhere to DLA’s RP001 packaging requirements. The item is subject to the DLA Master List of Technical and Quality Requirements, including RQ011 for removal of government identification from non-accepted supplies and RQ017 for bare item marking. The technical data package TDP Rev A Gen 1 IAW BASIC DRAWING NR 80020 426101 REVISION NR A DTD 07/28/2005 defines the item’s specifications. The contract mandates compliance with hazardous material labeling under 29 CFR 1910.1200 and radioactive material notification standards when thresholds are exceeded, as specified in DFARS clauses. Electronic invoicing is exclusively through WAWF, and the contractor must submit appropriate invoice types such as invoice and receiving report combos. All offerors must provide valid UEI and CAGE codes, represent their small business status if claiming set-asides, and disclose affiliation or OEM/distributor roles for any covered defense telecommunications equipment or services under 252.204-7017. The solicitation references multiple FAR and DFARS clauses including 52.227-1 ALT II, 52.232-39, 52.
ACTIVE DEVICES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334419
New
DIBBS
SHIELDING GASKET, ELThis contract specifies the procurement of a shielding gasket, part number PG632000-13 with NSN 5999016804505, under solicitation SPE7M5-26-T-333M. A total of 18 units are required at a unit price of $18.00, totaling $324.00, with delivery required within 146 days from the contract award, FOB origin. The item is designated as a critical application item for aviation and electronic systems, and compliance with applicable technical and quality requirements from the DLA Master List is mandatory. Packaging must adhere to MIL-STD-2073-1E with specific preservation methods, including drying and inert gas sealing, and marking must conform to MIL-STD-129 without special codes. Palletization follows DLA packaging standards, and the delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur at the destination, with zero tolerance for quantity variances. The need ship date is December 21, 2026, replacing the original required delivery date of October 14, 2026. The contract is managed by the Department of Defense’s Active Devices Division, with point of contact Margaret Smith, and falls under NAICS code 334419 for other electronic component manufacturing.
ACTIVE DEVICES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334419
New
DIBBS
SPRAY GUN, PAINTThis contract is for the procurement of 35 units of a spray gun for paint identified by NSN 4940-01-718-0912 and part number 7100228104 from 3M Company. The contract is issued under solicitation SPE7M4-26-T-268L with a unit price of $35.00 per unit for a total value of $1,225. Delivery is required within 116 days from the contract award, with shipment FOB origin and inspection and acceptance taking place at the destination. The supplies must comply with all applicable DLA technical and quality requirements referenced by R and I numbers from the DLA Master List, including specific packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware except for approved functional uses such as in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specific chemical reagents. Portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier as mandated by NAVSEA 5100-003D. Packaging must adhere to DLA’s packaging requirements, with palletization and unit containment conforming to specified codes and methods, and all items must be shipped to the DLA Distribution facility at New Cumberland, Pennsylvania. The need ship date and original delivery date are both set for November 21, 2026, and the contract allows for no quantity variance. The solicitation was posted on July 16, 2026, with a response deadline of July 27, 2026, under a federal procurement managed by the Department of Defense, Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 22 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, SENSITIVEThis contract pertains to the procurement of a sensitive switch, identified by NSN 5930011224239 and part number 51ML1 from Honeywell International Inc., with a quantity of three units to be delivered FOB origin within 92 days of contract award. The delivery is to be made to DLA Distribution Barstow, with inspection and acceptance occurring at the destination point. Strict packaging standards per MIL-STD-2073-1E are mandated, including specific preservation methods, wrapping materials, and unit container codes, with marking conforming to MIL-STD-129 and no special marking required. The contract prohibits the intentional addition of mercury or mercury-containing compounds in any supplied hardware unless explicitly exempted for functional components such as batteries, fluorescent lamps, sensors, weapon systems, or NAVSEA-specified reagents; exempted items must include shockproof design and a secondary containment boundary. Sampling and inspection follow zero-defect acceptance criteria under MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels or AQLs of VII/0.1, IV/1.0, and II/4.0 respectively, unless otherwise specified. The contract references the DLA Master List of Technical and Quality Requirements for technical and quality stipulations, with the applicable revision determined by the solicitation or award date depending on acquisition size. All units must be shipped in compliance with hazardous materials protocols as outlined in DLAD Proc Note C19, with the need ship date set for October 28, 2026, following an original required delivery date of October 14, 2026.
ELECTRICAL DEVICES DIV

POSTED

about 22 hours ago

DEADLINE

in 11 days
View Details