This Solicitation opportunity from Department Of Defense was posted on August 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

LIGHT SET, GENERAL I

Closed

SPE8E7-26-T-3530Federal

Submission Closed08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 335999

New

DIBBS

TAPE, INSULATION, ELECTR

Solicitation # SPE4A6-26-T-28QB

This contract is for the procurement of electrical insulation tape under solicitation SPE4A6-26-T-28QB for the Department of Defense ASC Commodities Division. The requirement consists of four rolls of material identified by NSN 5970-00-944-5015, with approved part numbers from Saint-Gobain Performance Plastics Corp, Rogers Corporation, and Hawkeye International. This is designated as a critical application commercial item with a non-extendable shelf life of 18 months. Delivery is required within 20 days after receipt of order, with FOB destination for both inspection and acceptance. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E, and requires sampling in accordance with MIL-STD-1916 or ASQ H1331. All shipments must comply with RP001 packaging requirements and include specific shelf-life marking.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

TAPE, INSULATION, ELECTR

Solicitation # SPE4A6-26-T-27CU

Solicitation SPE4A6-26-T-27CU is a Request for Quotations issued by the DLA Aviation ASC Commodities Division for the procurement of electrical insulation tape, identified by NSN 5970-00-480-1329. The requirement consists of multiple line items with quantities ranging from 1 to 20 rolls, with required delivery dates scheduled between August 28 and September 8, 2026. Delivery is required within five days of the award, with FOB, inspection, and acceptance all set at the destination. Shipments are directed to various locations, including the USS Shoup DDG 86, the DLA LMP Zone 1 depot in Texas, the Lockheed Martin Distribution Center in Georgia, ASD Oceana in Virginia, and the Base Naval de Rota in Spain. The contractor must adhere to strict quality and packaging standards, including sealing each tape in a waterproof polyfilm bag and packing 10 to 12 rolls per intermediate container. All marking must comply with MIL-STD-129, specifically using Special Marking Code 32 for Type I shelf-life items, which have a non-extendable shelf life of 18 months. The use of mercury or mercury compounds is strictly prohibited in all preservation, packaging, and marking. Technical and quality requirements are further governed by the DLA Master List and RP001 packaging requirements. Evaluation for award will consider price, with a preference for certified HUBZone Small Business Concerns. Offers utilizing additive manufacturing processes are ineligible for award. The procurement is subject to the Buy American Act and the Berry Amendment, requiring disclosure of any non-domestic materials. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS cybersecurity standards for safeguarding covered defense information.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

POWER SUPPLY, UNINTERRU

Solicitation # SPE7L7-26-Q-2372

Solicitation SPE7L7-26-Q-2372 is a fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for two uninterruptible power supplies, identified by NSN 6130-01-673-0176 and Motorola Solutions part number DSGXT4-1000RT120. The items are designated as critical application items with a 12-month extendable shelf life. Delivery is required within 60 days after order to the USS MARINETTE (LCS 25). Award will be based on the best value to the government, evaluating price, offered delivery, and past performance. The contract mandates strict adherence to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Because the items involve sealed lead acid batteries, the contractor must provide Material Safety Data Sheets per FED-STD-313 and comply with hazardous material shipping regulations under IP025. Quality assurance requires sampling according to MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in the sample lot. Additionally, the contractor must complete a CMMC Level 2 self-assessment and utilize the Wide Area WorkFlow system for all invoicing and receiving reports. Inspection and acceptance will occur at the point of origin.

Defense Logistics Agency

POSTED

DEADLINE

Supplier of Electrical Contacts (NSN 5999-01-132-8787)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Manufacturing of Special Purpose Branched Cable Assemblies

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supplier of Electromagnetic Relays (NSN 5945-01-136-7909)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Electrical Caps (NSN 5999-00-033-6574)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Electrical Solenoids (NSN 5945-00-369-0865)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Sleeve Bushings (NSN 3120011153346)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

UPS Preventative Maintenance Services

Solicitation # 36C24727Q0028

The Department of Veterans Affairs, specifically Network Contract Office 7, is seeking a provider for UPS Preventative Maintenance Services under solicitation number 36C24727Q0028. This is a combined contract opportunity set aside as a sole source for Service-Disabled Veteran-Owned Small Businesses under NAICS code 335999. The services will be performed in Dublin, Georgia, with the primary point of contact being Quentin Deloney. The solicitation was posted on September 11, 2026, and requires a response by September 22, 2026, at 5:00 PM. Interested parties should refer to the attached documentation for the full scope of the solicitation requirements.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

59--INSULATION SLEEVING,EL

Solicitation # SPE4A6-26-U-4183

Solicitation SPE4A6-26-U-4183 is a request for quotations issued by the ASC Commodities Division of the Department of Defense for the procurement of electrical insulation sleeving, identified by NSN 5970010203420. This is a Women-Owned Small Business set-aside under NAICS code 335999. The government intends to award a unilateral Simplified Indefinite-Delivery Contract with a one-year term or until the aggregate total of orders reaches a maximum ceiling of 350,000.00 dollars. The estimated annual quantity is 474 units, with a guaranteed minimum of 47 units and an expected average of two orders per year. Delivery is required within 117 days after order, with shipping to various CONUS and OCONUS DLA Depots under FOB Origin terms. The material must be procured in one continuous length on a reel or spool and marked according to MIL-STD-129. Packaging must comply with RP001 and the Hazard Communication Standard for any hazardous materials. Inspection and acceptance will occur at the destination, utilizing a zero-based sampling plan per MIL-STD-1916 or ASQ H1331. Award will be based on the most advantageous offer considering price and other factors, though items produced via additive manufacturing are ineligible. Invoicing must be processed electronically through the Wide Area WorkFlow system. Quotes must be submitted electronically via DIBBS by September 25, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Power Supply Repair and Modification (NSN 6130-01-486-5790)

Navsup Weapon Systems Support Mech

POSTED

about 23 hours ago

DEADLINE

in about 1 month

AI Contract Overview

The contract solicitation SPE8E7-26-T-3530 is for the procurement of LIGHT SET, GENERAL ILLUMINATION, identified by NSN 6220017059965, with a quantity of three units to be delivered FOB Origin, though the final delivery point is the DLA Distribution facility in New Cumberland, Pennsylvania. The award is expected to be made on a Lowest Price Technically Acceptable basis under simplified acquisition procedures, with all technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, which supersedes any other standards such as ASTM D3951. Compliance with MIL-STD-129 is mandatory for all packaging and labeling, including hazardous material compliance per FED-STD-313 and TQ Requirement IP025, while non-hazardous items must meet commercial packaging standards unless overridden by the DLA list. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with acceptance criteria of zero non-conformances, and attributes are classified with AQLs of 0.1 for critical, 1.0 for major, and 4.0 for minor, with unspecified attributes treated as major. The product must conform to multiple referenced technical drawings under revision control, with revision dates ranging from 1992 to 2026, and all items must be packaged and palletized according to RP001 DLA Packaging Requirements. The contractor must ensure cybersecurity compliance with NIST SP 800-171 and report any potential safety issues immediately, and all hazardous materials require complete Safety Data Sheets and proper labeling under 29 CFR 1910.1200. Contract administration is governed by WAWF for invoicing, with inspection and acceptance conducted at the destination upon delivery, which is due within 139 days of order placement, with a need ship date of January 4, 2027, and a required delivery date of May 5, 2027. The solicitation requires all offerors to provide a current UEI and CAGE code and to certify small business status and socioeconomic program eligibility. Special contractual requirements include adherence to the prohibition on hexavalent chromium, restrictions on mandatory arbitration, whistleblower protections, trafficking in persons policies, and the use of U.S.-flag vessels for any ocean shipments. The contract type is not yet

General Info

Three general illumination light sets at $3.00 each, FOB origin, delivered to New Cumberland, PA, within 139 days.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

RFQ SPE8E7-26-T-3530 for DLA Troop Support Lighting Equipment

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedAug 5

Solicitation

Response DeadlineAug 17

Deadline has passed

Submission Closed

08/17/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

View Agency Profile

Office AddressUSA

Contacts

Kelly Mitchell

contact@example.gov

+1 (555) 000-0000

Full Description

LIGHT SET,GENERAL I
LIGHT SET,GENERAL ILLUMINATION
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
TDP Rev A Gen 5 IAW BASIC DRAWING NR 19207 12617371 REVISION NR C DTD 12/04/2023 PART PIECE NUMBER:
TDP Rev A Gen 5 IAW REFERENCE DRAWING NR 19207 8763344 REVISION NR F DTD 03/19/2026 PART PIECE NUMBER:
TDP Rev A Gen 5 IAW REFERENCE DRAWING NR 19207 12472301 REVISION NR B DTD 09/25/2017 PART PIECE NUMBER:
TDP Rev A Gen 5 IAW REFERENCE DRAWING NR 19207 12295496 REVISION NR C DTD 08/29/1992 PART PIECE NUMBER:
TDP Rev A Gen 5
SPE8E7-26-T-3530
SECTION B
IAW REFERENCE DRAWING NR 19207 8735874
REVISION NR F DTD 10/10/1984
PART PIECE NUMBER:
TDP Rev A Gen 5 IAW REFERENCE DRAWING NR 19207 12309000 REVISION NR E DTD 08/08/2001 PART PIECE NUMBER:
TDP Rev A Gen 5 IAW REFERENCE DRAWING NR 19207 12369326 REVISION NR D DTD 09/24/1997 PART PIECE NUMBER:
TDP Rev A Gen 5 IAW REFERENCE DRAWING NR 19207 12350824 REVISION NR R DTD 09/28/2017 PART PIECE NUMBER:
TDP Rev A Gen 5 IAW REFERENCE DRAWING NR 19207 12369242 REVISION NR D DTD 04/08/1992 PART PIECE NUMBER:
TDP Rev A Gen 5 IAW REFERENCE DRAWING NR 19207 12308492 REVISION NR B DTD 06/01/2009 PART PIECE NUMBER:
TDP Rev A Gen 5 IAW REFERENCE DRAWING NR 19207 12577737 REVISION NR A DTD 01/29/2026 PART PIECE NUMBER:
TDP Rev A Gen 5 IAW REFERENCE DRAWING NR 19207 12578616 REVISION NR B DTD 08/01/2023 PART PIECE NUMBER:
TDP Rev A Gen 5 IAW REFERENCE DRAWING NR 19207 12578605 REVISION NR B DTD 08/01/2023 PART PIECE NUMBER:
TDP Rev A Gen 5 IAW REFERENCE DRAWING NR 19207 12578628 REVISION NR C DTD 08/01/2023 PART PIECE NUMBER:
TDP Rev A Gen 5 IAW REFERENCE DRAWING NR 19207 12639468 REVISION NR A DTD 08/01/2023 PART PIECE NUMBER:
TDP Rev A Gen 5 IAW REFERENCE DRAWING NR 19207 12639469 REVISION NR A DTD 08/01/2023 PART PIECE NUMBER:
TDP Rev A Gen 5 IAW REFERENCE DRAWING NR 19207 12617372 REVISION NR C DTD 12/04/2023 PART PIECE NUMBER:
TDP Rev A Gen 5 IAW REFERENCE DRAWING NR 19207 12578615 REVISION NR B DTD 08/01/2023 PART PIECE NUMBER:
TDP Rev A Gen 5
SPE8E7-26-T-3530
SECTION B
IAW REFERENCE DRAWING NR 19207 12308493
REVISION NR B DTD 09/06/2001
PART PIECE NUMBER:
TDP Rev A Gen 5 IAW REFERENCE DRAWING NR 19207 12578619 REVISION NR B DTD 08/01/2023 PART PIECE NUMBER:
TDP Rev A Gen 5 IAW REFERENCE DRAWING NR 19207 12617371 REVISION NR DTD 07/13/2026 PART PIECE NUMBER:
TDP Rev A Gen 5 IAW REFERENCE DRAWING NR 19207 12617371 REVISION NR A DTD 12/01/2022 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017422811 0001 EA 3.000
NSN/MATERIAL:6220017059965
DELIVERY (IN DAYS):0139
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
SPE8E7-26-T-3530
SECTION B
PR: 7017422811 PRLI: 0001 CONT’D
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/04/2027 Original Required Delivery Date:05/05/2027
SPE8E7-26-T-3530 NSN/Part Number: 6220-01-705-9965 Quantity: 3 EA Purchase Request: 7017422811QTY: 3 Delivery: 139 days ADO