LIGHT SET, GENERAL ILLU

LIGHT SET,GENERAL ILLUMINATION
LIGHT SET,GENERAL ILLUMINATION
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
TDP Rev B Gen 6 IAW BASIC DRAWING NR 19207 12617371 REVISION NR C DTD 12/04/2023 PART PIECE NUMBER:
TDP Rev B Gen 6 IAW REFERENCE DRAWING NR 19207 8763344 REVISION NR F DTD 03/19/2026 PART PIECE NUMBER:
TDP Rev B Gen 6 IAW REFERENCE DRAWING NR 19207 12472301 REVISION NR B DTD 09/25/2017 PART PIECE NUMBER:
TDP Rev B Gen 6 IAW REFERENCE DRAWING NR 19207 12295496 REVISION NR C DTD 08/29/1992 PART PIECE NUMBER:
TDP Rev B Gen 6
SPE8E7-27-T-0500
SECTION B
IAW REFERENCE DRAWING NR 19207 8735874
REVISION NR F DTD 10/10/1984
PART PIECE NUMBER:
TDP Rev B Gen 6 IAW REFERENCE DRAWING NR 19207 12309000 REVISION NR E DTD 08/08/2001 PART PIECE NUMBER:
TDP Rev B Gen 6 IAW REFERENCE DRAWING NR 19207 12369326 REVISION NR D DTD 09/24/1997 PART PIECE NUMBER:
TDP Rev B Gen 6 IAW REFERENCE DRAWING NR 19207 12350824 REVISION NR R DTD 09/28/2017 PART PIECE NUMBER:
TDP Rev B Gen 6 IAW REFERENCE DRAWING NR 19207 12369242 REVISION NR D DTD 04/08/1992 PART PIECE NUMBER:
TDP Rev B Gen 6 IAW REFERENCE DRAWING NR 19207 12308492 REVISION NR B DTD 06/01/2009 PART PIECE NUMBER:
TDP Rev B Gen 6 IAW REFERENCE DRAWING NR 19207 12577737 REVISION NR A DTD 01/29/2026 PART PIECE NUMBER:
TDP Rev B Gen 6 IAW REFERENCE DRAWING NR 19207 12578616 REVISION NR B DTD 08/01/2023 PART PIECE NUMBER:
TDP Rev B Gen 6 IAW REFERENCE DRAWING NR 19207 12578605 REVISION NR B DTD 08/01/2023 PART PIECE NUMBER:
TDP Rev B Gen 6 IAW REFERENCE DRAWING NR 19207 12578628 REVISION NR C DTD 08/01/2023 PART PIECE NUMBER:
TDP Rev B Gen 6 IAW REFERENCE DRAWING NR 19207 12639468 REVISION NR A DTD 08/01/2023 PART PIECE NUMBER:
TDP Rev B Gen 6 IAW REFERENCE DRAWING NR 19207 12639469 REVISION NR A DTD 08/01/2023 PART PIECE NUMBER:
TDP Rev B Gen 6 IAW REFERENCE DRAWING NR 19207 12617372 REVISION NR C DTD 12/04/2023 PART PIECE NUMBER:
TDP Rev B Gen 6 IAW REFERENCE DRAWING NR 19207 12578615 REVISION NR B DTD 08/01/2023 PART PIECE NUMBER:
TDP Rev B Gen 6
SPE8E7-27-T-0500
SECTION B
IAW REFERENCE DRAWING NR 19207 12308493
REVISION NR 09 DTD 09/06/2001
PART PIECE NUMBER:
TDP Rev B Gen 6 IAW REFERENCE DRAWING NR 19207 12578619 REVISION NR B DTD 08/01/2023 PART PIECE NUMBER:
TDP Rev B Gen 6 IAW REFERENCE DRAWING NR 19207 12617371 REVISION NR DTD 07/13/2026 PART PIECE NUMBER:
TDP Rev B Gen 6 IAW REFERENCE DRAWING NR 19207 12617371 REVISION NR A DTD 12/01/2022 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7019096552 0001 EA 1.000
NSN/MATERIAL:6220017059965
DELIVERY (IN DAYS):0166
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
SPE8E7-27-T-0500
SECTION B
PR: 7019096552 PRLI: 0001 CONT’D
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:05/09/2027 Original Required Delivery Date:09/07/2027
SPE8E7-27-T-0500 NSN/Part Number: 6220-01-705-9965 Quantity: 1 EA Purchase Request: 7019096552QTY: 1 Delivery: 166 days ADO