Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

LINE REACTORS

Active
SPE7M0-26-T-015JFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of one line reactor identified by NSN 6110-01-541-7029, with a requirement for delivery within five days of award. The solicitation number is SPE7M0-26-T-015J, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys organization, with performance required in Bremerton, Washington, 98314-5001. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which incorporates specific technical and quality controls identified by R or I numbers, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except in specified exemptions such as functional mercury in batteries, fluorescent lights, required instruments, sensors, controls, weapon systems, or chemical analysis reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary in accordance with NAVSEA 5100-003D. The offeror must provide a complete data package covering both the approved part and any alternate part, as no data is currently available for this item. The response deadline is August 3, 2026, and primary point of contact is Rocio Mino at DLA.

General Info

Procure one line reactor NSN 6110-01-541-7029, deliver in five days, no mercury, data package required, deadline August 3, 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

335312 - Motor and Generator ManufacturingView NAICS

Place of Performance

1400 FARRAGUT AVE, BREMERTON, WA, 98314-5001, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
Contacts
ROCIO MINO
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
LINE REACTORS
LINE REACTORS
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR NSN/Part Number: 6110-01-541-7029 Quantity: 1 EA Purchase Request: 7017554718QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335312
New
DIBBS
BATTERY POWER SUPPLY
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335312
New
DIBBS
PARTS KIT, FIBER OPTThe contract is for a Parts Kit, Fiber Opt, identified by NSN 6080017378594 and part number 0701-8001 from KITCO Fiber Optics Inc, classified as a commercial off the shelf item. It is issued under solicitation SPE7M0-26-T-016P with a total of three units required: one unit to be delivered to USS PATRICK GALLAGHER in West Bath, Maine, and two units to Huntington Ingalls Inc in Gulfport, Mississippi. Delivery is required within five days of shipment, with FOB origin terms and no quantity variance allowed. Inspection and acceptance both occur at the destination. Packaging must comply with MIL-STD-2073-1E Appendix D for kits, marking per MIL-STD-129, and palletization per DLA packaging requirements. Mercury or mercury-containing compounds are strictly prohibited unless used in functional components like batteries, fluorescent lamps, or specific instruments, with additional containment requirements for portable devices. The items must be shipped by the fastest traceable means—parcel post is explicitly forbidden. The contract references technical and quality requirements from the DLA Master List, and all specifications are governed by the version in effect on the solicitation or award date. The solicitation is set aside entirely for small businesses under NAICS code 335312, with a response deadline of August 3, 2026, and the original required delivery dates set for July 13 and July 16, 2026, respectively.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING CThe contract is for the procurement of eight alternating current motors with NSN 6105-01-195-5321 under solicitation SPE7M1-26-T-221F, issued by the Department of Defense through the Maritime Supply Chain. The required delivery timeframe is 223 days after award, with responses due by August 3, 2026. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, incorporating all relevant R and I numbered specifications referenced in the documentation. Configuration change management is mandatory, requiring formal Engineering Change Proposals and requests for variance or waiver for any deviations. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware, except in specific authorized applications such as functional batteries, fluorescent lights, certain instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary as mandated by NAVSEA 5100-003D. The contractor must remove government identification from non-accepted supplies and is required to submit a complete data package for both the approved and alternate parts due to lack of existing data. The place of performance is Tracy, California, and the point of contact is Lanette Lipscomb, reachable via email and phone provided.
MARITIME SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335312
New
Federal
DISCRETE INPUT PWA,
Pa DLA Aviation At Philadelphia

POSTED

about 18 hours ago

DEADLINE

in 30 days
View Details
NAICS: 335312
New
Federal
MOTOR,ACThe contract pertains to the procurement of an AC MOTOR under solicitation number SPRMM126QMG54, issued by the Defense Logistics Agency (DLA) Mechanicsburg, with a response deadline of August 3, 2026. The acquisition is governed by a Lowest Price Technically Acceptable (LPTA) evaluation method, emphasizing adherence to technical specifications over cost minimization alone. The required motor must conform to specified cage codes and reference numbers, including 51802 A-445-299 REV -3 and 10941 350-445-011, and must be marked in compliance with MIL-STD-130 Revision N. Design or part number changes require prior written approval from the NAVICP-MECH Contracting Officer, with substitutions classified under specific codes indicating interchangeability and impact. The contractor is responsible for all inspection, quality assurance, and recordkeeping activities, with documentation retained for 365 days after final delivery. Packaging must follow MIL-STD-2073, and inspection of materials occurs at the source, with final acceptance determined at the designated facility. Only authorized distributors may submit proposals and must provide proof of authorization on official letterhead. All contractual documents are considered officially issued upon electronic transmission via email, fax, or other digital means, and performance must occur at the contracted facility unless a formal change is approved with a $250 administrative cost reduction. Electronic submission of the Invoice and Receiving Report (COMBO) through the Wide Area Workflow (WAWF) system is mandatory, and vendors are strongly encouraged to register for Electronic Data Access (EDA) on the Procurement Integrated Enterprise Environment (PIEE) portal to monitor contract actions. The solicitation references mandatory clauses including Buy American, Small Business Representations, and Security Prohibitions, with compliance required for award eligibility. Offerors must supply their email for communication and provide the original equipment manufacturer’s details if they are not the manufacturer. Technical documents referenced must be obtained from approved government sources or publishers, and distribution restrictions apply to materials marked with designated distribution statements. Offers must be submitted by the deadline and any exceptions to requirements must be clearly indicated in EDI submissions or via hard copy to avoid default award based on solicitation terms.
SPRMM1 DLA Mechanicsburg

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335312
New
DIBBS
Electrical Component Supply (Alternating Current Motors)The contract involves the supply of two alternating current motors with the National Stock Number 6105013541269, requiring full compliance with federal and military specifications to ensure operational reliability in defense applications. The solicitation is structured as a subcontract under the NAICS code 335312, indicating the manufacturing of electric motors and generators, and is issued by the Maritime Supply Chain under the Department of Defense. Performance of the contract is mandated to occur in Tracy, California, with a zip code of 95304-5000, and all delivered units must meet exacting technical and quality standards dictated by military requirements. The opportunity was posted on July 20, 2026, and responses are due by July 31, 2026, providing a ten-day window for interested parties to submit proposals. While no specific set-aside designation is stated, the contract remains open to qualified subcontractors capable of fulfilling the technical and delivery requirements. The procurement is accessible via the DIBBS platform, and while no point of contact is listed, all inquiries and submissions must align with the official solicitation portal to be considered valid. Compliance with timelines, specification adherence, and performance location are critical to successful bid submission and eventual award.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 335312
New
DIBBS
Supply of Circuit Breakers with Hazardous Materials ComplianceThree units of circuit breakers with NSN 5925002625723 are to be supplied and delivered to a military storage facility in Sagamihara, Japan, under a subcontract agreement governed by the Department of Defense through the MARITIME SUPPLY CHAIN ESOC BUYS. All units must comply fully with hazardous materials handling, labeling, packaging, and documentation standards to meet military safety and regulatory requirements. The solicitation was posted on July 20, 2026, with responses required by July 31, 2026, and the contract falls under NAICS code 335312 which pertains to the manufacture of electrical equipment for power distribution. The delivery location is specified as the military installation in Sagamihara, and all packaging and documentation must reflect strict adherence to international and defense-specific protocols for hazardous components. The contractual obligation is managed through the DLA DIBBS platform under reference number SPE7M026T013A.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 335312
New
DIBBS
Electrical Component Manufacturing – End Bell, ElectricalThe contract calls for the manufacture and supply of 39,000 units of the END BELL, ELECTRICAL, identified by NSN 6115013088541, a motor subassembly component critical to electrical systems. Production must be completed and all units delivered to the DLA Distribution Depot at Hill AFB, Utah, with a zip code of 84056-5734, no later than 140 days after the order is placed. The item falls under NAICS code 335312, indicating it relates to the manufacturing of electrical lighting and wiring equipment. The contract is structured as a subcontract under the Department of Defense’s Maritime Supply Chain, with a response deadline of July 31, 2026, and was posted on July 20, 2026. All deliverables must adhere to the technical and performance specifications for the end bell component, with full compliance required for military application.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 335312
New
DIBBS
Switch Assembly Manufacturing and SupplyThe contract entails the manufacture and delivery of two military-specification switch assemblies identified by NSN 5930-01-033-1781, ensuring full compliance with Defense Logistics Agency standards and requirements. Each unit must be produced under strict defense-grade specifications with complete supply chain traceability from raw materials through final inspection and delivery. The work is governed by DLA’s procurement protocols, mandating rigorous documentation, quality control, and adherence to defense-industrial base regulations. Production must occur within a certified manufacturing environment that supports end-to-end component provenance to meet the Department of Defense’s accountability and security standards. The award is structured as a subcontract under the NAICS code 335312, which classifies it within the Electrical Equipment and Appliance Manufacturing sector. The contract was posted on July 20, 2026, and is linked to the Defense Logistics Agency’s official procurement portal, with performance obligations tied to federal defense supply chain mandates. Although the specific delivery location and point of contact are not detailed, compliance with DLA’s operational and logistical frameworks is mandatory, ensuring the delivered assemblies meet mission-critical performance and reliability criteria for U.S. military applications.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 335312
New
DIBBS
Rectifier Assembly Manufacturing and DeliveryThe contract requires the manufacture, testing, and delivery of a single rectifier assembly identified by NSN 6130015457093, adhering strictly to military standards including MIL-STD-129 for labeling and packaging, MIL-STD-1916 for quality assurance, and explicit mercury-free specifications. The product must be produced and verified to meet all technical and environmental requirements set forth by the Department of Defense to ensure operational reliability and regulatory compliance. Delivery is scheduled FOB origin to Chamberlain, South Dakota, with the zip code 57325-0496 as the designated point of performance. This subcontract is issued by the Defense Logistics Agency under the NAICS code 335312, which classifies the work as electric lighting equipment manufacturing. The solicitation was posted on July 20, 2026, with a firm response deadline of July 31, 2026. The procurement is part of a broader effort by the Department of Defense to secure critical electronic components with stringent environmental and performance criteria. While no set-aside designation is specified, the requirement demands precision in manufacturing and full adherence to federal defense protocols without exception.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 335312
New
DIBBS
Circuit Breaker Supply (NSN 5925015213173)The contract entails the supply of three military-specification circuit breakers identified by NSN 5925015213173, ensuring full compliance with all applicable military and industry standards. These components are critical for mission-critical electrical systems and must meet rigorous performance, durability, and environmental specifications required by defense operations. The subcontract is issued under the NAICS code 335312, which applies to the manufacturing of electrical equipment and components, and is managed by the Defense Logistics Agency on behalf of the Department of Defense. Despite the absence of specific location details for the place of performance or point of contact, the procurement is part of a broader initiative to maintain operational readiness through timely acquisition of certified defense hardware. The solicitation was posted on July 20, 2026, and the contract can be referenced via the official DIBBS portal using the provided link.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 335312
New
DIBBS
Supply of 5kW Service Kit (NSN: 2940016273978)The contract entails the procurement and delivery of five units of a 5kW service kit designated for military power generation equipment, identified by the National Stock Number 2940016273978 and manufacturer part number A045Y126 under CAGE code 44940. These kits are essential components for maintaining and servicing military-grade power systems and must meet stringent military specifications to ensure operational reliability in field conditions. The procurement is structured as a subcontract under the auspices of the Defense Logistics Agency, a department within the Department of Defense, and is categorized under NAICS code 335312, which corresponds to the manufacturing of electric lighting and wiring equipment. The contract was posted on July 20, 2026, and the place of performance and point of contact details are not specified, indicating potential flexibility in logistics or reliance on established supply chain protocols. Delivery is expected to support readiness and sustainment objectives for U.S. military operations, with the service kits likely integrated into existing power generation systems used across deployable units. The award reference links to a DIBBS portal entry, confirming the transaction is formally documented within the Department of Defense’s procurement tracking system, though the solicitation number is not provided. All units must be delivered in full compliance with technical and quality standards associated with the assigned NSN and manufacturer part.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 333914
New
DIBBS
SLEEVE, SHAFT, PUMPThe contract pertains to the procurement of one sleeve assembly for a pump shaft, specifically designated for use with the Worthington 2CNE72 centrifugal pump and identified by the part number 023054-30 under the NSN 4320002941591. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Delivery is required within five days from the origin point under FOB origin terms, with no tolerance for quantity variance. The product must be prepared for shipment in accordance with MIL-STD-2073-1E packaging standards, marked per MIL-STD-129, and packed at level B using code Q with no special marking. Inspection and acceptance occur at the origin, and the item must be palletized following DLA packaging requirements. The delivery destination is King Abdulaziz Naval Base in Jubail, Saudi Arabia, with freight handled by New York Forwarding Services Inc. The solicitation number is SPE7M0-26-T-014A, with a required delivery date of July 23, 2026, and the contract is managed under the Department of Defense’s Maritime Supply Chain ESOc Buys unit, with Grace Beck listed as the primary point of contact.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, ROTARYThe contract is for a single rotary switch with NSN 5930-01-619-0800, under purchase request 7017559756, requiring delivery within five days after award. The solicitation number is SPE7M0-26-T-015K, issued on July 21, 2026, with responses due by August 3, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless an amendment supersedes it. The alternate offeror must submit a complete data package including specifications for both the approved and alternate parts. The item is to be delivered to FPO, ZIP 34094, and the contracting office is the Maritime Supply Chain ESOC Buys under the Department of Defense. Primary point of contact is Laurie Wassmuth, reachable via email or phone. The NAICS code is 335313, and the solicitation is classified as federal with no set-aside designation.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
HOSE, NONMETALLICThe contract specifies the procurement of one nonmetallic hose with NSN 4720-01-471-4870 and part number 5E-9746, supplied by CATERPILLAR INC, under solicitation SPE7M0-26-T-015B. The item must be delivered within five days to Fort Leonard Wood, Missouri, under FOB origin terms, with no tolerance for quantity variance. All packaging must comply with ASTM D3951 and MIL-STD-129 for labeling and marking, with DLA Master List of Technical and Quality Requirements taking precedence over any other standard. The hose must be palletized according to DLA packaging requirements and shipped via traceable freight methods, excluding parcel post. The shipment is designated as RDD3 with no NMCS requirement, and the delivery address is the US Army Engineer School. The required delivery date is July 22, 2026, and the contract includes strict government-specific identifiers and logistics codes for tracking and accountability. The point of contact for inquiries is Abaigael Masterson, and the procurement is managed by the Department of Defense’s Maritime Supply Chain ESOc Buys.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335929
New
DIBBS
SIDE LEFT ELECThe contract pertains to the procurement of five units of SIDE LEFT ELEC with NSN 6145-01-556-7082, under solicitation number SPE7M0-26-T-016N, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office. Delivery is required within five days of award, and the place of performance is designated as Texarkana, Texas, with a ZIP code of 75507-5000. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions, unless an amendment supersedes it. The offeror must provide a complete data package covering both the approved and alternate parts, as no specific data is currently available. The solicitation was posted on July 21, 2026, with bids due by August 3, 2026, and is categorized under NAICS code 335929. Primary point of contact is Abaigael Masterson, reachable via email and phone listed in the contract data.
Other Communication and Energy Wire Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334220
New
DIBBS
WAVEGUIDE ASSEMBLYThe contract is for the procurement of a single Waveguide Assembly with part number R17-3329 and NSN 5985-01-651-9165, manufactured by Microwave Engineering Corporation, under solicitation SPE7M0-26-T-015P. This is a critical application item requiring strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with specific compliance to revision E of reference drawing NR 1L4J7 684-8270004 dated 01/10/2018. The item must be produced using limited rights data accessible only to qualified vendors, and a classified drawing will be provided upon award following submission of a completed DD Form 254. The vendor must also achieve CMMC Level 2 self-assessment certification and comply with DLA packaging requirements including MIL-STD-2073-1E and MIL-STD-129 for marking, with no special markings required. The unit of issue is EA, with a fixed quantity of one, and delivery must occur within five days at FOB origin, with inspection and acceptance also occurring at origin. Packaging and shipping must follow hazardous materials guidelines and use traceable freight methods—parcel post is prohibited. The delivery address is Tobyhanna Army Depot, with a required delivery date of July 21, 2026. The item is identified as a government-furnished property with specific tracking identifiers and is subject to cybersecurity and data protection mandates under covered defense information rules.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONMETALThis contract specifies the procurement of a single nonmetallic hose assembly with part number 4720-01-084-0119, measuring 3/8 inch inner diameter and 28 inches in length, supplied under firm fixed price terms with zero variance allowed in quantity. The item must be delivered within five days after award of order and is subject to inspection and acceptance at the destination. Packaging must comply with ASTM D3951 and all applicable DLA Master List of Technical and Quality Requirements, with mandatory labeling per MIL-STD-129 and palletization in accordance with RP001 DLA Packaging Requirements. The unit of issue is one each and the item is to be shipped by the fastest traceable means, explicitly excluding parcel post. The delivery address is Logistics Lane, Barksdale Air Force Base, Louisiana, with specific shipping identifiers including RDD 777, PROJ TP 1, and supplier code YAG328. The contract references approved suppliers and part numbers including Danfoss Power Solutions II, LLC and Atkinson Co., Inc., and the government reserves the right to remove identification from non-accepted supplies. All technical and quality specifications cited in the DLA Master List control over conflicting standards. The solicitation number is SPE7M0-26-Q-1084, with a response deadline of July 28, 2026, and a required delivery date of July 20, 2026.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333912
New
DIBBS
VACUUM PUMP UNIT, ROThe contract is for one vacuum pump unit, part number 93613 and NSN 4310016416459, to be delivered within five days of award under solicitation SPE7M0-26-T-015U. The unit must comply with all DLA packaging requirements outlined in RP001 and be packaged in accordance with MIL-STD-2073-1E using method 31 for preservation, with no cushioning material and a packaging code of U. Marking must follow MIL-STD-129 with no special marking required. The delivery is FOB origin, inspection and acceptance occur at the destination, and no quantity variance is permitted. The item must not contain any Class I ozone-depleting chemicals, and any substitute materials must be approved unless explicitly permitted by specification. The delivery destination is the Carrier Outfitting Material Support Center in Suffolk, VA, and shipment must be sent by the fastest traceable method—parcel post is prohibited. The contract prohibits removal of government identification from non-accepted supplies and is governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date. The required delivery date is July 20, 2026, and the point of contact is Grace Beck of the Department of Defense.
Air and Gas Compressor Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
TEST SET SUBASSEMBLThis contract pertains to the procurement of two units of a test set subassembly identified by NSN 4921-01-029-3054 and part number CA70251, under solicitation SPE7M0-26-T-014D. The delivery must occur within five days of order placement, with FOB origin terms and no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 specifications, utilizing approved methods and materials while avoiding plastics where possible, as required by DLA packaging standards. The item is to be delivered to a military facility in Derince, İzmit, Turkey, with freight handled by PTK00A at NUWC Newport, and must be palletized and marked in accordance with all referenced defense standards. The contract prohibits the use of Class I ozone-depleting chemicals and mandates adherence to all technical and quality requirements listed in the DLA Master List, which controls based on the solicitation issue date. Cybersecurity requirements mandate a CMMC Level 2 self-assessment, and the supplier must ensure compliance with the DLA procurement framework including oversight of government identification removal on non-accepted supplies. The solicitation is issued by the Department of Defense through the Maritime Supply Chain ESOc Buys office, with a response deadline of August 3, 2026, and an original required delivery date of July 23, 2026. The item is classified under NAICS code 333310 and is subject to federal procurement rules. Special marking is not required, and the unit of issue is each. The point of contact is Audrey Acuna, and the full technical and quality specifications are incorporated by reference through DLA’s official master list. All deliveries are to be coordinated to the specified Turkish military address and governed by the DoD’s authorized unit of issue guidelines. The contract does not permit substitutions without prior approval, particularly for chemicals or packaging materials, and remains binding under all applicable defense acquisition regulations.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, TRIGGERThe contract pertains to the procurement of one SWITCH, TRIGGER with NSN 5930-01-177-5707 under solicitation SPE7M0-26-T-014P, with a required delivery within five days of award. The procurement is governed by DLA packaging requirements and includes the application of Covered Defense Information under RD002, alongside mandatory compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 through a self-assessment. All technical and quality requirements referenced in this solicitation are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The government mandates the removal of any government identification from non-accepted supplies. The solicitation was posted on July 21, 2026, with responses due by August 3, 2026, and is classified under NAICS code 335313 for electrical equipment manufacturing. The contracting activity is managed by the Maritime Supply Chain ESOC Buys under the Department of Defense, with performance required in Lexington, Kentucky, 40516-9723. Primary point of contact is Laurie Wassmuth, reachable via email and phone provided.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
DIBBS
CABLE, POWER, ELECTRICALThe contract specifies the procurement of 800-foot reels of electrical power cable under NSN 6145012020676, with a total quantity of 360 feet divided across three line items, each priced at $120 per foot. The cable must comply with Military Specification MIL-DTL-24643/16G and MIL-DTL-24643D, and is designated as a critical application item requiring strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The product must be supplied in continuous length, as dictated by Advice Code 2N, and multiple unit packs are not acceptable. Mercury or mercury-containing compounds are strictly prohibited in or in direct contact with the cable except for specific functional exceptions like batteries, fluorescent lamps, sensors, or weapon systems, with portable devices containing mercury requiring shockproof construction and a secondary containment boundary as per NAVSEA 5100-003D. Packaging and preservation must follow MIL-STD-2073-1E and MIL-DTL-12000, with marking conforming to MIL-STD-129, and the items must be delivered FOB origin within five days of order. The delivery destination is the U.S. Naval Base in Sasebo, Japan, with inspection and acceptance occurring at the point of delivery. The contract is subject to a 10% positive quantity variance with zero tolerance for under-delivery and falls under a Total Small Business Set-Aside classification. All supplies must be sourced from qualified manufacturers listed on the Qualified Products List or Qualified Manufacturers List, and deviation requests must be formally submitted. The required delivery date is July 17, 2026.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334220
New
DIBBS
SERVICE KITThis contract pertains to the procurement of a Service Kit under solicitation SPE7M0-26-T-015Y, with a single unit of item NSN 4940-01-687-7467, quantity one, to be delivered within five days from the required delivery date of July 20, 2026. Delivery is FOB origin, with no tolerance for variance in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129, with no special markings required. Palletization follows DLA’s packaging requirements, and all items must be shipped by the fastest traceable means, explicitly prohibiting parcel post. The shipping and delivery address is the Carrier Outfitting Material Support Center in Suffolk, Virginia. Ozone-depleting chemicals are strictly prohibited, and any substitute materials must receive prior approval unless explicitly permitted by specification. The contract incorporates all technical and quality requirements listed under R or I numbers from the DLA Master List, with the applicable revision determined by the solicitation issuance or award date. The unit of issue is EA, and the total price is based on a unit price of $1.00. Government-specific identifiers are included for tracking and logistics including RDD 777, project ZQ0 TP 1, and procurement request 7017552578. The primary point of contact is Audrey Acuna, with the contract issued under NAICS code 334220 by the Department of Defense.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
DIBBS
TRANSFORMER, AUDIO FThe contract specifies the procurement of a single audio frequency transformer with NSN 5950-00-827-7181 and part number 1279642-1, sourced from approved suppliers including Honeywell International Inc. Coast/Advanced Chip Magnetics Inc. and Precision Electronics Inc. Delivery is required within five days of contract award, FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, superseding standard ASTM D3951. Non-hazardous items must be commercially packaged per DLA guidelines, while hazardous materials require alignment with FED-STD-313 and TQ requirement IP025. All packaging and labeling must conform to MIL-STD-129, with palletization following RP001 specifications. The shipment must be sent via the fastest traceable means, excluding parcel post, to the designated Tinker AFB receiving facility, with a required delivery deadline of July 21, 2026. The contract is issued under solicitation SPE7M0-26-T-014Q, with point of contact Audrey Acuna, and falls under NAICS code 334416 for electronic component manufacturing, managed by the Department of Defense’s Maritime Supply Chain ESOC.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details