Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Government Contract opportunity from National Aeronautics And Space Administration was posted on May 13, 2021. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Lithium-Ion High Power Cell Design

Closed
80JSC021Q0006Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 335991
SLED
Activated Powder Carbon, As Needed Over 5-Year Period (Re-Bid)
Solicitation # ITB 6631-26
The City of Spokane is soliciting bids under ITB 6631-26 for the supply of Activated Powder Carbon on an as-needed basis over a five-year period. Based on historical usage data, the estimated requirement is approximately 306,000 lbs over the contract term. The material must be 100 percent virgin, coal-based, and non-halogenated carbon with a BET surface area greater than 450 m2/gm and an auto ignition temperature exceeding 400 degrees Celsius. Moisture content must comply with the current revision of ASTM 2867. Technical compliance is evaluated on a pass/fail basis, and bidders must initial the technical specifications sheet to be considered responsive. Required packaging includes bags with a height of 50 inches, a discharge diameter of 20 inches, a discharge length of 36 inches, and a discharge spout tie located 8 inches below the bottom of the bag. The contract is governed by the laws of the State of Washington and the Washington State Uniform Commercial Code, with all disputes handled in Spokane County. Bidders must adhere to strict non-discrimination policies, including compliance with the Americans with Disabilities Act and Section 504 of the Rehabilitation Act of 1973. All shipments must be delivered to the warehouse at 2900 S Geiger Blvd, Spokane, WA, and invoices will only be processed once all items are received.
City of Spokane

POSTED

14 days ago

DEADLINE

in 13 days
NAICS: 335991
DIBBS
59--ELECTRODE ASSY
Solicitation # SPE4A6-27-U-0015
Solicitation SPE4A6-27-U-0015 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of Electrode Assemblies, NSN 5977006262420. This procurement may result in a unilateral Indefinite Delivery Contract with a one-year term and a maximum aggregate value of 350,000.00 dollars. The estimated annual demand is four units, with a guaranteed minimum quantity of one unit. Quotes must be submitted electronically by October 22, 2026. Award evaluation will be based on the price quoted for the estimated annual demand, with potential preferences given to HUBZone certified small businesses and offers featuring shorter delivery lead times than the requested 80 days after receipt of order. The contract requires strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with a total prohibition on the use of mercury in preservation and packaging. Technical data is subject to ITAR or EAR export controls, and additive manufacturing is prohibited unless authorized in writing. Quality assurance requires a manufacturer inspection system compliant with ISO 9001:2015 or an equivalent standard, with inspection and acceptance occurring at the point of origin. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Additionally, contractors must comply with the Buy American Act, the Berry Amendment, and specific DFARS cybersecurity and hazardous material labeling regulations.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

15 days ago

DEADLINE

in about 7 hours

General Info

NAICS

335991 - Carbon and Graphite Product Manufacturing

Place of Performance

Houston, TX, 77058, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

1 update
PhaseClosed
Posted

special-notice

Response Deadline

Deadline has passed

Notice updated

Notice details unchanged. Attachments may have changed.

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyNational Aeronautics And Space Administration → NASA Johnson Space Center
Contacts2 people available
OfficeHOUSTON, TX, 77058, USA
Office AddressHOUSTON, TX, 77058, USA

Full Description

Show more
NASA/Johnson Space Center has a requirement for 1 Lot (60,000 each) Lithium-Ion High Power cells that meets or exceeds 2500 Wh/kg specific power, 500 Wh/L energy density, 200 W/kg specific energy, and 6300 W/L power density. These are performance requirements for the Li-ion cell design for enabling the required high performance battery designs for NASA missions, such Human Lander Systems, Orion, and others. For a safety perspective, the cell manufacturer must be capable of manufacturing thermal runaway trigger cells in a small batch of the exact same design as the unmodified cells purchased. These trigger cells are made by implanting a small internal short circuit device invented by NASA & National Renewable Energy Laboratory (NREL) that induces an on demand hard internal short circuit when the cell is heated above 57?C. Selecting a manufacturer capable and willing to made these trigger cells is critical to enable safety verification of battery design utilizing these cell designs. NASA/Johnson Space Center intends to purchase the lithium-ion high power cell designs from KULR Technology Corporation. KULR Technology Corporation is currently the only source capable of meeting NASA minimum specifications to provide lithium-ion high power cell designs. The Government intends to acquire a commercial item using FAR Part 12. Interested organizations may submit their capabilities and qualifications to perform the effort in writing to Bermuda Brittingham at bermuda.a.brittingham@nasa.gov and Jerry G. Meeks Jr. at jerry.g.meeks@nasa.gov not later than 12:00 p.m. local time on 4/14/2021. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/pub_library/Omb.html

More opportunities from National Aeronautics And Space Administration → NASA Johnson Space Center

Same awarding agency

NAICS: 336414
New
Federal
Commercial Low Earth Orbit (LEO) Destination Contract (CLDC) Request for Proposal
Solicitation # 80JSC027R0004
The National Aeronautics and Space Administration Johnson Space Center is soliciting proposals under solicitation 80JSC027R0004 for the Commercial Low Earth Orbit Destination Contract. This effort seeks a Multi-Award Indefinite Delivery/Indefinite Quantity contract, utilizing a Firm-Fixed-Price structure, for the design, development, manufacture, launch, and operation of a Commercial LEO Destination System to succeed the International Space Station. The system comprises three primary components: the Crew Transportation System, the Commercial LEO Destination, and the Cargo Transportation System. Performance is measured across three capability categories ranging from one-month crew tended missions to six-month standard service missions. The contract includes a base ordering period from April 2027 through April 2035, with two subsequent option periods extending the potential performance through April 2042. Proposals are due by December 8, 2026, at 1:00 p.m. Central Time, with Volume III regarding past performance requested early on November 24, 2026. Award decisions will be based on best value, evaluating Mission Suitability, Price, and Past Performance, with Mission Suitability being the most significant technical factor. The scope of work involves rigorous certification and safety standards, including compliance with AS9100 and specific human space flight requirements. Key contractual obligations include the submission of an Organizational Conflicts of Interest plan, adherence to the Outer Space Treaty, and the procurement of specific property damage insurance for certain launch vehicle categories. All submissions must be delivered electronically via NASA's EFISS Box in Microsoft Office formats.
Guided Missile and Space Vehicle Manufacturing

POSTED

7 days ago

DEADLINE

in about 2 months
View Details
NAICS: 541330
New
Federal
Rendezvous Proximity Operations, and Capture (RPOC) VI
Solicitation # 80JSC027RPOC6
The NASA Johnson Space Center is conducting market research via a Sources Sought notice for the Rendezvous Proximity Operations, and Capture (RPOC) VI requirement. The agency is seeking capability statements from interested firms, including all socioeconomic small business categories and HBCU/MI institutions, to provide comprehensive engineering support services. This scope includes research, analysis, design, development, integration, verification, test, evaluation, and operations support specifically for Guidance, Navigation and Control (GN&C), system engineering, and RPOC activities. Key technical objectives involve developing high-fidelity simulation environments and analysis tools, providing documentation for Certification of Flight Readiness (CoFR) recommendations, and offering real-time technical support for the ISS/Destination Mission Evaluation Room RPOC Console. The procurement falls under NAICS code 541330 for Engineering Services, with a size standard of 25.5 million dollars. Technical requirements necessitate proficiency in tools such as Trick, JEOD, Copernicus, Genesis, and NASA core Flight System, utilizing programming languages including MATLAB, Python, Julia, C, and C++. Performance will primarily support the Johnson Space Center and other NASA centers, with potential for both domestic and international travel. Interested vendors must submit a capability statement of no more than five pages, including a brief technical narrative and a list of up to five relevant customers from the past five years, to the designated points of contact by October 28, 2026.
Engineering Services

POSTED

7 days ago

DEADLINE

in 7 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS