Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

LITTER-SPLINT, EXTRICAT

Active
SPE2DS-26-T-328CFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Litter-Splint, Extrication is a specialized medical device designed for rapid patient immobilization in cases of spinal and neck injuries, suitable for use with two- or four-person carries, helicopter lifts, or vertical confined space extractions. Constructed of 18 oz vinyl-laminated polyester in orange, it resists acids and stains, is easily decontaminated, and folds to 24 x 12 inches for compact storage, expanding to 73 x 24 inches for use. It features continuous polyester straps ensuring patient safety during transport and has a capacity rating of up to 1500 lbs. Each unit must be packaged in a sealed container that protects against damage and shipped in commercial exterior containers compliant with lowest-cost carrier requirements, ensuring safe delivery to the specified point. All packaging and marking must adhere strictly to Medical Marking Standard No. 1, superseding MIL-STD-129, with copies obtainable via DLA Troop Support. The product is identified by NSN 6530-01-477-8525, with a unit of issue of each, and is subject to technical and quality requirements listed in the DLA Master List. The procurement is governed by solicitation SPE2DS-26-T-328C, issued by the Department of Defense’s Medical Supply Chain organization, with a response deadline of August 17, 2026, and delivery required within 20 days after award.

General Info

Litter-Splint for spinal injuries, 1500 lbs capacity, orange vinyl, folds to 24x12 in, meets Medical Marking Standard No. 1, NSN 6530-01-477-8525.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

UNIT 100119 BOX 1, FPO, AP, 96691, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUSA
Contacts
Olusola Emmanuel
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
LITTER-SPLINT,EXTRICATION
LITTER-SPLINT, EXTRICATION
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
REEVES SLEEVE II, USED WITH A TWO OR FOUR PERSON CARRY, HELICOPTER LIFT, OR IN VERTICAL CONFINED SPACE EXTRICATION; CONTINUOUS POLYESTER STRAPS INSURE PATIENT SAFETY DURING LIFTS AND TRANSPORTS; COMPLETE IMMOBILIZATION, ENVIRONMENTAL PROTECTION; DESIGNED FOR RAPID PATIENT IMMOBILIZATION IN SPINAL AND NECK INJURIES; CAPACITY RATING: TO 1500 LBS; ORANGE COLOR; CONSTRUCTED OF 18 OZ VINYL LAMINATED POLYESTER; RESISTS ACID AND STAINS, EASILY DECONTAMINATED; EASY TO STORE; FOLDS TO 24 X 12 IN. AND OPENS TO 73 X 24 IN.
UNIT OF ISSUE: EACH (EA)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SPE2DS-26-T-328C
SECTION B
ADEQUATE DATA FOR THE NSN/Part Number: 6530-01-477-8525 Quantity: 1 EA Purchase Request: 7017804242QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339113
New
DIBBS
Supply of Surgical Adhesive Tape (NSN: 6510-01-414-3579)
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 339113
New
DIBBS
Medical Device Manufacturing – Disposable Inspiratory Valves
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
Disposable Hypodermic Syringe Supply
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
PAD, HEATING, CHEMICAL
Solicitation # SPE2DH-26-T-5894
The contract solicitation SPE2DH-26-T-5894 seeks the procurement of 1 package of 24 disposable chemical heating pads measuring 11 x 4 inches, identified by NSN 6530-01-212-5343. Each pad is designed to deliver one hour of uniform heat at a maximum temperature of 110 degrees Fahrenheit, conforms to body contours, and is constructed with plastic laminated fabric for the outer case. The unit of issue is a package of twenty-four, and delivery is required within twenty days after receipt of order, with the original delivery date set for August 11, 2026, to Luke Air Force Base, Arizona. The product must comply with all applicable technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements through identified R or I numbers, and packaging must adhere to MIL-STD-2073-1E as augmented by Special Packaging Instructions MPpWN00001. Commercial packaging is required, with each unit sealed in a protective container and shipped in suitable exterior containers appropriate for carrier transport. Marking must follow the Medical Marking Standard No. 1, superseding MIL-STD-129, with additional labeling requirements for hazardous materials according to the Hazard Communication Standard (29 CFR 1910.1200 et seq.) or other specified statutes where applicable. Inspection and acceptance are to occur at destination under FAR 52.246-2, and invoicing must be submitted electronically via WAWF as authorized by DFARS 252.232-7003. The contract is fixed price, and all offers must be submitted through the DIBBS portal by 5:00 PM Eastern Time on August 17, 2026. Offerors are required to complete mandatory representations and certifications in SAM including compliance with safeguarding defense information, prohibition on covered telecommunications equipment, and small business program status. Alternate product submissions are permitted only if accompanied by complete technical data, as the government lacks sufficient information for evaluation without it. The contracting officer is Tina Vu of DLA Troop Support, Medical Supply Chain FSH, with payment and administrative details to be finalized upon award.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
PAD, HOT-COLD TREATMENT
Solicitation # SPE2DH-26-T-5900
The contract requires the supply of reusable hot-cold gel pack therapy devices, sized at 6.6 inches by 9 inches, in cases of 24 units each, with a total order of 10 cases. These noncirculating gel packs are nontoxic and nonirritating, designed for convenient and effective pain relief, and are classified as a Class I medical device under FDA regulation. Although a 510(k) premarket notification is not required, the product must comply with FDA registration, listing, labeling, and good manufacturing practices. All items must be marked in strict accordance with the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and packaged per DLA packaging requirements and MIL-STD-2073-1E, ensuring protection against damage during transport. The delivery is FOB destination, with a strict five-day delivery window and zero quantity variance allowed, and must be shipped via the fastest traceable means, excluding parcel post. The items are to be delivered to Fort Stewart, Georgia, with detailed packaging, palletization, and marking instructions to ensure compliance with government standards. The solicitation number is SPE2DH-26-T-5900, issued by the Department of Defense under the Medical Supply Chain FSH, with a response deadline of August 17, 2026, and a required delivery date of August 12, 2026. The NSN is 6530-01-723-6237 and the manufacturer part number is 80104, produced by Cardinal Health, Inc. The contract includes references to technical and quality requirements from the DLA Master List, and incorporates provisions for the removal of government identification from non-accepted supplies. Covered defense information may apply, and buyers must refer the bid details to a product specialist via EBS for confirmation. The unit of issue is case, with a fixed price of $10.00 per case, totaling $100.00. Special shipping labels and markings are required, and all packaging must be commercial in nature, suitable for common carrier transit at the lowest possible rate.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
TUBE, FEEDING, SURGICAL
Solicitation # SPE2DS-26-T-327R
The contract is for the procurement of pediatric nasal feeding tubes, specifically 8 FR size, with a radiopaque distal end to enable precise placement confirmation, each unit measuring 42 inches in length and supplied in quantities of 10 per pack. The item is identified by NSN 6515-01-150-2946 and manufacturer part number 8888-261800, supplied by COVIDEN SALES LLC with commercial part number 461800. The requirement is for two package units, each containing 10 tubes, with a fixed unit price of $2.00 and a total contract value based on the specified quantity. Delivery must be completed within five days of award, with FOB destination terms applying, and the supplies must be delivered to M97111 at Camp Pendleton, CA, under strict shipping requirements prohibiting parcel post and mandating traceable transportation methods. All packaging must comply with commercial standards as outlined in the DLA Packaging Requirements for Procurement (RP001), be sealed to prevent damage, and be palletized per RP001, with unit and shipping containers marked in strict accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Materials must be labeled per DLA’s latest Medical Marking Standard, and all technical and quality specifications referenced by ‘R’ or ‘I’ numbers from the DLA Master List of Technical and Quality Requirements are binding and take precedence over ASTM D3951. The device is regulated by the FDA, requiring referral confirmation via EBS prior to award. The solicitation is a small business set-aside, with bids submitted exclusively through the DLA Internet Bid Board System, and includes multiple DFARS clauses governing cybersecurity, information safeguarding, export controls, hazardous materials, whistleblower protections, and compliance with NIST SP 800-171 for protected defense information. Payment must be processed electronically through the Wide Area WorkFlow system, and all deliveries are subject to destination inspection and acceptance. The contracting officer, Michael Small, oversees the solicitation with an original required delivery date of August 11, 2026, and full compliance with all listed clauses is mandatory for award consideration.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
INTRAOSSEOUS INFUSION
Solicitation # SPE2DS-26-T-328E
The contract pertains to the procurement of two boxes of EZ-IO 25mm Intraosseous Infusion System kits, each box containing five units, for a total of ten kits. Each kit includes a 15-gauge sterile EZ-IO needle set, an EZ-Stabilizer dressing, an EZ-Connect extension set, a NeedleVise 1-port sharps block, and a patient wristband, designed to streamline and simplify intraosseous vascular access in clinical settings. The system features a flexible, translucent dressing that provides full visibility of the insertion site, enhances securement with improved adhesion, and reduces the risk of catheter dislodgement while minimizing the number of separate items clinicians must carry. All components are sterile and intended for use with every EZ-IO insertion. The product must have a minimum shelf life of 48 months, with no more than seven months elapsed between the date of manufacture and delivery to the government. The NSN is 6515-01-647-1590, and the purchase request number is 7017804039. Delivery is required within 20 days of award under solicitation SPE2DS-26-T-328E, issued by the Department of Defense's Medical Supply ChainMD Surg FSF. Technical and quality requirements are governed by the DLA Master List, packaging must comply with DLA standards, and suppliers must remove government identification from non-accepted items. Bidders must clearly identify the source and part number being supplied. The primary point of contact is Colin Owens, reachable via email and phone provided.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SPONGE, SURGICAL
Solicitation # SPE2DS-26-T-327T
The contract pertains to the procurement of surgical gauze sponges measuring 6 by 6-3/4 inches, packaged in units of 600 per package, with a total quantity of one unit required. The item is identified by NSN 6510-00-294-0009 and is to be delivered within 20 days of award. Packaging must comply with DLA packaging requirements, and the product must meet technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which are incorporated by reference and controlled by the revision in effect on the solicitation or award date. The sponges are to be furnished in fluff Kerlix format, with 10 envelopes per tray and 12 trays per box. The solicitation is issued under SPE2DS-26-T-327T, with a response deadline of August 17, 2026, and falls under NAICS code 339113 for surgical appliance and supply manufacturing. The contracting agency is the Department of Defense, specifically the Medical Supply Chain MD Surg FSF, with performance destined to Fort Campbell, Tennessee. Point of contact is Mary-Kathryn Donahue, and all supplies must be marked in accordance with government identification removal requirements for non-accepted items.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CONTROL SET, GASTROINTE
Solicitation # SPE2DS-26-T-327J
The contract calls for the procurement of a Gastrointestinal Control Set, a non-infectious quality control kit designed for in vitro use with the FilmArray Gastrointestinal Panel Assay on the FilmArray instrument. Each kit contains 12 vials, each with 200 µL of synthetic nucleic acid suspended in a buffered solution of preservatives and stabilizers, sufficient for six quality control runs, composed of six each of part numbers M2393718 and M2402818. The product must be stored frozen between -25°C and -15°C and has a fixed shelf life of 18 months, non-extendable, per Type I (Code K) requirements. The item is regulated by the FDA, and the contracting official must submit a referral to confirm regulatory compliance. The required quantity is three kits, to be delivered within 83 days after receipt of order via FOB Destination to APO AE 09227-0000, with zero variance allowed in quantity. Packaging must comply with commercial standards as specified, using sealed unit containers that prevent breakage, and must be shipped in exterior containers ensuring safe delivery at the lowest carrier rate. All labeling and marking must adhere to the Medical Marking Standard No. 1, superseding MIL-STD-129, with palletization following DLA Packaging Requirements. The kit is classified as a covered defense information item, requiring compliance with safeguarding and cyber incident reporting standards under DFARS 252.204-7012, and incorporates additional DFARS clauses addressing hazardous materials, export controls, whistleblower protections, and prohibitions on certain Chinese military company products. The contractor must specify the source and part number supplied, submit bids via DIBBS, and comply with electronic payment and invoicing requirements through WAWF. The contract is an automated award and not a small business set-aside, with payment routed according to the resulting award documentation.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SPECIMEN KIT, URINE
Solicitation # SPE2DH-26-T-5897
The specimen kit for urine is designed specifically for collection and transfer of samples intended for detection of Chlamydia trachomatis and Neisseria gonorrhoeae using COBAS PCR technology. Each kit includes a COBAS PCR media tube and a transfer pipette, packaged in box quantities of 100 units per box. The item is classified as a TYPE I (CODE M) medical supply with a strict 24-month shelf life that is non-extendable, requiring that no more than three months have elapsed between the date of manufacture and the date of delivery to the government. Labeling must conform to the latest revision of Medical Marking Standard No. 1, clearly indicating the date of manufacture, expiration or retest date, and the contract or lot number, superseding all previous MIL-STD-129 requirements. Packaging must comply with commercial standards, ensuring protection from damage during transit through sealed unit containers and suitable exterior shipping containers, with markings aligned to MMS No. 1. The solicitation is governed by DLA technical and quality requirements, including packaging standards and the removal of government identification from non-accepted supplies. The National Stock Number is 6632-01-675-7582 with a procurement quantity of two boxes, under purchase request 7017802509, and a delivery requirement of 20 days after order. The contract is issued under solicitation SPE2DH-26-T-5897, posted on August 10, 2026, with responses due by August 17, 2026. The item falls under NAICS code 339113 and is managed by the Department of Defense’s Medical Supply Chain FSH. The point of contact is Tina Vu, with delivery performance required at Minot Air Force Base, North Dakota. This acquisition is subject to applicable defense information controls and follows DLA’s standard procedures for medical equipment procurement, including compliance with all referenced technical specifications and labeling mandates.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
VALVE, INSPIRATORY, M
Solicitation # SPE2DS-26-T-327C
The contract solicits 4 cases of disposable inspiratory valves with adapters, each case containing 20 units, designed for use with manual resuscitators or ventilators as specified by the manufacturer. These PEEP valves are compatible directly with original AMBU resuscitators and AMBUMATIC devices without additional connectors, feature unique resistance characteristics, are latex-free, and intended for single-use application. Each unit must be sealed in a protective container and packed in commercial shipping containers suitable for safe delivery via common carrier, with palletization compliant with DLA Packaging Requirements for Procurement. All items must be marked in accordance with Medical Marking Standard No. 1, superseding MIL-STD-129, with each label including the NSN, manufacturer and CAGE code, date of manufacture, and contract number. The product has a case dimension of 9.25 x 8.0 x 5.0 inches and is subject to technical and quality requirements from the DLA Master List of Technical and Quality Requirements. Delivery is required within five days of award to Fort Stewart, Georgia, under FOB Destination terms. The solicitation mandates electronic invoicing through WAWF and requires compliance with DFARS clauses including Safeguarding Covered Defense Information and Cyber Incident Reporting, NIST SP 800-171 DOD Assessment Requirements with a deviation, and prohibitions on hexavalent chromium and export-controlled items. Offerors must provide complete data for the approved part number and are not permitted to submit alternate offers without full technical data. Hazardous material documentation, including Safety Data Sheets compliant with 29 CFR 1910.1200, must be submitted if applicable, and all labeling must meet Hazard Communication Standard requirements. Quotes must be submitted via DIBBS by the closing date of August 17, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
DEPRESSOR, TONGUE
Solicitation # SPE2DS-26-T-327Q
The contract calls for the procurement of 5 packages of sterile hardwood tongue depressors, each containing 100 units, identified by NSN 6515013055120, with delivery required within 20 days of order receipt to two U.S. Navy vessels: USS Theodore Roosevelt CVN 71 and USS Nitze DDG 94, delivered FOB destination. The item is regulated by the FDA and must comply with stringent medical standards, including being marked in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and packaged commercially with each unit sealed in a protective container to prevent damage during transit. Palletization must adhere to DLA Packaging Requirements for Procurement (RP001), and all packaging must meet ASTM D3951 unless superseded by higher-priority DLA Master List of Technical and Quality Requirements referenced by R or I numbers. The item has a non-extendable shelf life of 60 months and must be shipped by the fastest traceable means, prohibiting parcel post; vendors must use the Vendor Shipment Module (VSM) via the Account Management & Provisioning System (AMPS), which is now required for all DLA shipments. The contract mandates electronic invoicing through Wide Area Workflow (WAWF), with payment tied to receipt and inspection at the destination. Compliance with cybersecurity protocols is required through DFARS clauses covering safeguarding covered defense information, NIST SP 800-171 assessments, and prohibitions against using covered telecommunications equipment. Offerors must submit a Safety Data Sheet to be considered responsible for award, and all representations—regarding small business status, trafficking in persons, employment eligibility, and cyber compliance—must be validated in the System for Award Management. The Berry Amendment applies due to the threshold reduction to $150,000, requiring domestic content disclosure if applicable, and the solicitation is subject to automated award consideration with a HUBZone preference unless waived. The contract is issued under the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and must be submitted via DIBBS by the stated deadline.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 541611
New
DIBBS
Regulatory Compliance and Data Safeguarding SupportThe contract seeks consulting and administrative support to ensure compliance with key federal regulations including the Defense Federal Acquisition Regulation Supplement, Federal Acquisition Regulation, Occupational Safety and Health Administration Hazard Communication Standard, and Basic Safeguarding of Contractor Information Systems. The scope of work involves providing expert guidance and operational assistance to uphold regulatory adherence across all applicable areas, with a focus on maintaining the integrity and security of contractor information systems and ensuring proper handling of hazardous materials. The services are critical to supporting the Department of Defense’s Medical Supply Chain MD Surg FSF with accurate, timely, and compliant administrative practices in alignment with federal mandates. Performance of the work is required at Fort Drum, New York, with a response deadline of August 17, 2026, and the solicitation was posted on August 10, 2026. This is classified as a subcontract under NAICS code 541611, which corresponds to Management Consulting Services. While no specific set-aside type is indicated, the contracting activity falls under the broader authority of the Department of Defense, requiring potential offerors to demonstrate proven experience in regulatory compliance frameworks pertinent to defense contracting and information security. All work must be executed with precision to meet the stringent requirements governing protected data and operational safety in a military supply chain environment.
Administrative Management and General Management Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 484220
New
DIBBS
Domestic Freight and Final Mile Delivery to Military BasesThe contract outlines the transportation and final delivery of medical gloves to two U.S. military installations: Fort Drum in New York and Fort Bragg in North Carolina, under FOB Destination terms, meaning the vendor assumes responsibility for all shipping costs and risks until the goods reach the designated delivery points. Full tracking and proof of delivery are required to ensure accountability and compliance with military supply chain standards. The solicitation is classified as a subcontract under NAICS code 484220, which pertains to truck transportation for local and long-distance freight. The posting date is August 10, 2026, with responses due by August 17, 2026, and the contracting activity falls under the Department of Defense through the Medical Supply Chain MD SURG FSF. Delivery must be completed at the specified locations with precise documentation to meet federal procurement obligations.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Labeling, and Compliance Services for Medical SuppliesThe contract requires the provision of value-added packaging and labeling services for medical supplies, strictly adhering to military and federal compliance standards including MIL-STD-129 for uniform labeling and OSHA hazard communication guidelines to ensure safety and regulatory alignment. Services must support the Department of Defense’s Medical Supply Chain under the Fort Drum, New York, location with a ZIP code of 13602-0000, and are classified as a subcontract under NAICS code 561910, which pertains to other support services. The solicitation was posted on August 10, 2026, and responses are due by August 17, 2026, with no set-aside provisions specified. All work must meet precise documentation, marking, and packaging specifications to ensure seamless integration into military logistics systems and compliance with federal safety mandates.
Packaging and Labeling Services

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 325620
New
DIBBS
Supply of Patient Examination Gloves (Latex/Nitrile)The contract involves the procurement and delivery of medical-grade patient examination gloves, available in both latex and nitrile materials, in bulk packaging to military installations, with a primary place of performance at Fort Drum, New York. The supplier is required to meet rigorous regulatory standards including FDA regulations, ASTM specifications, and detailed military labeling requirements to ensure suitability for clinical and operational use in defense healthcare settings. All gloves must comply with quality and safety benchmarks mandated for deployment in military medical environments, and packaging must adhere to specified military logistics and identification protocols. The solicitation was posted on August 10, 2026, with a response deadline of August 17, 2026, indicating a tight turnaround for potential vendors. This is classified as a subcontract under NAICS code 325620, which corresponds to medical manufacturing, and is managed by the Medical Supply Chain, MD Surg FSF under the Department of Defense. There is no set-aside designation specified, meaning the opportunity is open to all eligible vendors without preference given to small, minority-owned, or other targeted business categories. Vendors must submit proposals through the DIBBS portal, and successful bidders will be expected to meet delivery schedules and quality control expectations without deviation from the stated technical and regulatory criteria.
Toilet Preparation Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541330
New
DIBBS
Destination Inspection Coordination and ComplianceThis contract requires managing destination inspection activities in full compliance with FAR 52.246-2, ensuring rigorous documentation, quality control, and seamless coordination with DLA inspection teams to verify the condition and conformity of medical supplies upon arrival at the place of performance in Fort Bragg, North Carolina. The work demands precise adherence to federal acquisition regulations governing inspection and acceptance procedures, with a focus on maintaining accountability and operational readiness for military medical supply chains. The subcontract is under the Department of Defense's Medical Supply Chain MD Surg FSF, categorized under NAICS code 541330, and is open for response until August 17, 2026, following a posting date of August 10, 2026. All inspection tasks must be executed at the designated location in Fort Bragg, with responsibilities extending to accurate recordkeeping, timely communication with DLA inspectors, and ensuring all delivered items meet established quality and compliance standards prior to acceptance. This effort supports critical logistics operations for defense medical needs and requires a contractor with demonstrated expertise in federal inspection protocols and supply chain compliance.
Engineering Services

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 385110
New
DIBBS
Medical Item Preservation and Packaging ServicesThe contract seeks subcontractors to provide preservation, packaging, and palletization services for medical supplies in accordance with strict Department of Defense logistics standards, specifically those mandated by DLA to ensure environmental compliance, extended shelf-life, and safe transit under military operational conditions. All work must adhere to prescribed protocols for protecting sensitive medical items from degradation during storage and transportation, with performance requirements aligned to the unique demands of military supply chains. The designated place of performance is Fort Bragg, North Carolina, with a zip code of 28310, indicating the primary operational location where services must be delivered. The NAICS code 385110 categorizes this effort under Medical Equipment and Supplies Manufacturing, underscoring the technical nature of the packaging and preservation tasks involved. The contract is designated as a subcontract with no set-aside provisions, and responses are due by August 17, 2026, following a posting date of August 10, 2026. The awarding entity is the Medical Supply Chain MD Surg FSF under the Department of Defense, reflecting its integration into the broader military medical logistics infrastructure. Subcontractors must be prepared to meet rigorous quality control, documentation, and compliance benchmarks to ensure seamless integration into military supply operations.

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Packaging and Labeling ComplianceThe contract requires strict adherence to OSHA HAZCOM, MIL-STD-129, and DLA marking standards for the packaging and labeling of hazardous medical supply shipments, ensuring all materials are properly identified, documented, and transported in compliance with federal safety and defense regulations. All work must be performed to meet the rigorous labeling and documentation requirements necessary for military and federal medical logistics, with a focus on accurate hazard communication and uniformity in marking protocols across the supply chain. The opportunity is classified as a subcontract under NAICS code 541690, with a response deadline of August 17, 2026, and a performance location at Fort Bragg, North Carolina, 28310. The contracting entity is the Department of Defense through its Medical Supply Chain MD Surg FSF office, signaling that the work supports critical defense medical operations. Compliance with these standards is non-negotiable, and failure to meet the specified requirements could result in rejection of shipments or contractual penalties, making precision in packaging, labeling, and regulatory alignment essential for any potential contractor.
Other Scientific and Technical Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
Nitrile Exam Glove SupplyThe contract is for the supply of nitrile patient examining gloves that are latex-free, powder-free, and non-sterile, with a size small specification and a thickness of 6 mil, packaged in quantities of 250 gloves per box. The solicitation is classified as a subcontract and is managed under the NAICS code 339112, which pertains to medical equipment and supplies manufacturing. The offering is coordinated by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance required at Fort Bragg, North Carolina, with a zip code of 28310. The solicitation was posted on August 10, 2026, and responses must be submitted by August 17, 2026. All details are accessible through the DIBBS platform using the provided link.
Surgical and Medical Instrument Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541380
New
DIBBS
Packaging & Labeling Compliance Services
Testing Laboratories and Services

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 488510
New
DIBBS
Hazardous Materials Logistics & Ocean Transport
Freight Transportation Arrangement

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 325412
New
DIBBS
Medical Device Supply – Saline Lock Kits
Pharmaceutical Preparation Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 562910
New
DIBBS
Hazardous and Radioactive Materials HandlingThe contract requires comprehensive compliance packaging, labeling, and documentation services for hazardous and radioactive materials, ensuring full adherence to HAZCOM, DOT, IATA, and MIL-STD-129 standards. All work must be performed to meet stringent regulatory requirements governing the safe handling, transport, and identification of dangerous goods, with particular emphasis on military and medical supply chain protocols. The performance location is designated as APO with zip code 09227-0000, indicating operations will support Department of Defense logistics in a military overseas environment. This is a subcontract under the NAICS code 562910 for hazardous waste collection and treatment services, issued by the Medical Supply Chain MD Surg FSF under the Department of Defense. The solicitation was posted on August 10, 2026, with a firm deadline for responses on August 17, 2026. Contractors must be prepared to deliver precise documentation, durable and compliant labeling, and secure packaging solutions that meet federal and international transport regulations. Failure to comply with any of the specified standards could result in rejection of deliverables, regulatory non-compliance, and disruption of mission-critical medical and hazardous material logistics.
Remediation Services

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details