Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

LOCK, ROD END, HOLDBA

Active
SPE7L1-26-T-839EFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 41 units of a LOCK, ROD END, HOLDBA with NSN 5340014889256, sourced from TRIUMPH ACTUATION SYSTEMS YAKIMA, LLC under part number 7-0541-2. Delivery is required within 125 days from the date of award, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the destination, and all items must be packaged per DLA standards, specifically RP001, with labeling and marking compliant with MIL-STD-129. If the item is classified as hazardous under FED-STD-313, it must be packaged according to TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 applies, though DLA’s Master List of Technical and Quality Requirements overrides all other standards. Tooling and casting or forging processes may be involved in manufacture, and contractors are directed to submit a Casting and Forging Assistance Request if they require support. Packaging must be palletized in accordance with DLA guidelines, and the designated delivery point is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581. The original required delivery date is April 21, 2027, with a needed ship date of July 20, 2026. Unit price is $41.00 per ea, totaling $1,681.00, and the solicitation number is SPE7L1-26-T-839E, with a response deadline of July 27, 2026. All technical and quality requirements referenced are governed by the DLA Master List, applicable as of the solicitation issue date.

General Info

Procure 41 rod end locks, NSN 5340014889256, $41 each, deliver to San Diego by July 20, 2026, per DLA standards.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L1-26-T-839E for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
ISABELLE SZULEWSKI
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
LOCK,ROD END,HOLDBA
LOCK,ROD END,HOLDBA
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Casting/forging may be required to manufacture this NSN and tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please submit a Casting and Forging Assistance Request at either https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/ or Land & Maritime Supply Chains DSCC.cast.forge@dla.mil.
TRIUMPH ACTUATION SYSTEMS YAKIMA, LLC 97415 P/N 7-0541-2
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017438316 0001 EA 41.000
NSN/MATERIAL:5340014889256
DELIVERY (IN DAYS):0125
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
SPE7L1-26-T-839E
SECTION B
PR: 7017438316 PRLI: 0001 CONT’D
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
Need Ship Date:07/20/2026 Original Required Delivery Date:04/21/2027
SPE7L1-26-T-839E NSN/Part Number: 5340-01-488-9256 Quantity: 41 EA Purchase Request: 7017438316QTY: 41 Delivery: 125 days ADO

Similar Contracts

NAICS: 332510
New
DIBBS
TIE DOWN, CARGO, AIRCRAFTThis contract pertains to the procurement of a Tie Down, Cargo, Aircraft, identified by NSN 1670-01-599-2776, with a single unit requirement and a firm fixed price structure. The item is designated as a Critical Safety Item by both the Navy and Air Force, requiring strict adherence to safety and quality standards, including mandatory inspection and verification by qualified personnel through QPL procedures as defined in MIL-DTL-25959J Revision 1, with no authorization for Alternative Repair Procedures. All components must comply with stringent quality benchmarks including SAE AS9100, and the item must be manufactured without intentional addition of mercury except in specified exceptions such as functional batteries or instruments, with additional containment requirements for portable devices. The supplier must ensure supply chain traceability in accordance with DLA Directive Procurement Note C03 and maintain documentation for audit purposes. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, including lot and serial numbers, contractor and manufacturer CAGE codes, and part numbers on every unit pack. Sampling for inspection must conform to MIL-STD-1916 or a comparable zero-defect plan, with verification levels assigned to critical, major, and minor attributes. The delivery timeline is set for 522 days after contract award, with inspection and acceptance occurring at origin, and the item must be shipped FOB destination with specific palletization and packaging standards outlined in DLA packaging directives. Manufacturing may involve casting or forging operations where the government does not hold the necessary tooling; suppliers are advised to submit a Casting and Forging Assistance Request if required. Any waiver or deviation from contractual requirements must be formally submitted to the DSC Contracting Officer for approval. The item is also subject to the DLA Master List of Technical and Quality Requirements, with specific references to RQ009 for origin inspection, RQ016 for qualified product lists, RQ018 for traceability retention, RT001 for calibrated test equipment, and RQ039 for higher-level quality compliance. All documentation must align with the contract’s referenced specifications, including QAP-13873 and SD-6, and the unit of issue must correspond to the approved DoD ANSI X12 standard. Failure to meet any of these requirements, particularly those tied to safety and traceability, will result in rejection of the supply.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

in about 3 hours

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
DIBBS
Manufacture of Aircraft Cargo Tie-Down AssembliesThe contract calls for the full production of cargo tie-down assemblies identified by NSN 1670-01-599-2776, encompassing all stages from fabrication and assembly to rigorous testing and certification in compliance with military standards. This effort is critical to ensuring the safety and operational readiness of aircraft cargo systems, requiring precise adherence to technical specifications and quality controls defined by defense requirements. The work must be executed to meet the stringent durability, load capacity, and reliability benchmarks established for military aviation applications. Issued as a subcontract under NAICS code 332510, the opportunity is managed by the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense. The solicitation was posted on July 16, 2026, with responses due by August 17, 2026. Performance will be executed in accordance with defense logistics protocols, though specific location details are not provided. The contract vehicle is accessible via the DIBBS platform, and all qualified subcontractors must ensure complete compliance with federal acquisition regulations and military certification procedures to be eligible for award.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

in about 3 hours

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
DIBBS
Manufacture and Supply of Helical Compressor Seat (Fluid Power Component)The contract entails the precision machining, quality assurance, and delivery of a helical compressor seat, a critical fluid power component, for use in government logistics operations under the Defense Logistics Agency. The work requires strict adherence to technical specifications, including material certification to ensure compliance with military-grade standards, proper packaging to protect the component during transit, and timely shipment to a designated DLA distribution hub. All manufacturing processes must meet rigorous quality control protocols to guarantee performance and reliability in operational environments. This subcontract, categorized under NAICS code 332510 for machine shops and precision manufacturing, is part of the Department of Defense’s supply chain and is intended to support defense systems requiring dependable fluid power components. While no specific set-aside status or solicitation number is provided, the performance location and delivery destination are tied to the DLA’s nationwide logistics infrastructure, indicating a need for consistent, secure, and traceable supply chain management. The contract is posted as active through the DIBBS system, with the expectation that the supplier will complete all deliverables in alignment with federal procurement and defense logistics standards.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

N/A
View Details
NAICS: 332510
New
DIBBS
HANDLE, MANUAL CONTRThe contract solicitation SPE7LX-26-U-8833 seeks 42 units of a manual handle, NSN 5340-01-369-0979, with a delivery requirement of 32 days after award. The procurement is subject to full and open competition and incorporates stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. The vendor must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization and comply with all handling protocols for Covered Defense Information. Technical data associated with this item is subject to export controls under ITAR or EAR, and access is restricted to contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by DLA to handle such data. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials must be submitted for approval unless explicitly permitted by specification. Packaging must adhere to DLA requirements, and any non-accepted supplies must have all government identification removed prior to disposal. The solicitation issued on July 15, 2026, with responses due by July 30, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense, with Theodore Misiolek as the primary point of contact.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
Vehicular Bracket Supply and PackagingThe contract entails the supply, packaging, and full compliance for 41 defense-grade vehicular brackets identified by NSN 2540017069107, requiring adherence to stringent military specifications for functionality, durability, and environmental resilience. All units must be packaged in accordance with defense logistics standards, including proper containment, labeling, and documentation to ensure safe transport and storage, with special attention to the handling and labeling of any hazardous materials associated with the components or their coatings. Compliance with applicable regulatory frameworks is mandatory throughout the production and delivery lifecycle. This is a subcontract under the Department of Defense, managed by the Defense Logistics Agency, with the NAICS code 332510 indicating the industrial classification for forged and stamped metal product manufacturing. The award is scheduled for issuance in July 2026, and performance location details are not specified, suggesting flexibility in manufacturing and delivery logistics. The work must meet unambiguous defense-grade requirements, and all deliverables are subject to rigorous quality assurance and inspection protocols prior to acceptance by the government.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

N/A
View Details