Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Lock Washer Supply (NSN: 5310009370453)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply of 2,400 lock washers identified by NSN 5310009370453, manufactured to meet federal specifications and packaging standards for delivery to multiple Defense Logistics Agency sites. The requirement is classified as a subcontract under NAICS code 332111, which corresponds to the manufacturing of metal forgings and stampings, indicating the need for precision production processes to ensure compliance with military-grade standards. Delivery must fulfill all logistical and quality control parameters mandated by the Department of Defense to support operational readiness. The solicitation was posted on July 16, 2026, and performance is expected to occur across DLA distribution channels without a specified primary location. The contract does not include a set-aside classification, meaning it is open to all eligible contractors regardless of business size or ownership demographics. While no point of contact or detailed delivery address is provided, the award will be managed under the broader DLA framework, with fulfillment directed to designated defense logistics nodes. The official award record can be accessed via the provided DIBBS link for further contractual details and tracking.

General Info

Supply of 2,400 military-grade lock washers to DLA sites under NAICS 332111, no set-aside, delivery unspecified.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332111 - Iron and Steel ForgingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7M2-26-T-4025.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

WASHER, LOCK

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 2,400 lock washers meeting federal specifications and packaging standards for delivery to DLA sites.

Similar Contracts

Same NAICS industry code

PIN, STRAIGHT, HEADED

Solicitation # SPE4A6-26-T-26AX

This contract is for the procurement of 170 straight headed pins, identified as a commercial off the shelf item under NSN 5315014834617. The requirement specifies approved part numbers from Cadillac Gage Textron Inc, Jergens Inc, and McMaster-Carr Supply Co. Delivery is set for 219 days after the order date, with a required delivery date of April 18, 2027. The items are to be delivered FOB Origin and will be inspected and accepted at the destination, specifically DLA Distribution Red River in Texarkana, Texas. The agreement incorporates several technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 guidelines. Item Unique Identification is not required for this order. The solicitation was issued by the ASC Commodities Division of the Department of Defense.

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

BREECHRING FORGING PER DRAWING FOR WATERVLIET ARSENAL

Solicitation # W911PT26RA014

This pre-solicitation notice from the Department of Defense, specifically Army Contracting Command ACC-Watervliet, is for the procurement of 54 breech ring forgings for the 105mm M20, adhering to drawing 12591139 Rev B. The contract requires a first article, and the delivery terms are set as FOB Destination with a delivery timeline of 180 days after the contract is awarded. The official solicitation is estimated to be released on or around September 14, 2026, and will be posted electronically via beta.SAM.gov. To be eligible for the award, interested parties must maintain an active registration in the System for Award Management and possess a valid, current Joint Certification Program approval to access the necessary technical drawings. The procurement is subject to the World Trade Organization Government Procurement Agreement and Free Trade Agreements. All communications and amendments will be handled electronically, and it is the responsibility of the bidder to monitor the SAM website for updates to ensure their offer remains responsive.

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE86-26-T-2176

This contract is for the procurement of 10 feet of annealed 4130 steel composite flat bar, measuring 0.375 inches thick and 0.500 inches wide, with a weight of 0.638 lb/ft. The material must be supplied in whole feet lengths of 10, 11, or 12 feet. Compliance with SAE AMS-S-6758B, ASTM A700-14, and SAE AMS2806 is required, and the supplier must provide a Certificate of Quality Compliance with every shipment. Eligible awardees must be listed on the Qualified Suppliers List for Distributors (QSLD). Strict marking requirements apply, including the use of stamping or stenciling for essential data such as the contract delivery order number, NSN, and heat/lot numbers. Packaging and marking must adhere to MIL-STD-129 and DLA packaging requirements. The order is to be delivered FOB Origin to Fort Campbell, Kentucky, with a required delivery date of August 27, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8E4-26-T-2179

This contract is for the procurement of 2 feet of annealed round steel bar, specifically Steel Comp 416 with a 1.625 inch diameter and a weight of 7.051 lb/ft. The material must be supplied in whole feet lengths between 10 and 12 feet. Compliance with ASTM A582/A582M and SAE AMS2806 standards is required, and the supplier must be listed on the Qualified Suppliers List for Distributors (QSLD). A Certificate of Quality Compliance must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. Strict marking and packaging requirements apply, including continuous identification markings such as the contract delivery order number, NSN, and manufacturer details. Markings must be legible, waterproof, and applied via stamping or stenciling, though adhesive labels are permitted for specific dimensions. The order is to be delivered FOB Origin to Tinker AFB, with a delivery window of 5 days after receipt of order and a required delivery date of August 28, 2026. Packaging must adhere to MIL-STD-2073-1E and RP001 DLA requirements.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE86-26-T-2178

This contract is for the procurement of forged round steel bars, 2.500 inches in diameter, with lengths between 10 and 20 feet. The material must be supplied in whole foot increments and meet Class AC or Class 2 specifications. A total of 10 feet is required for delivery to the SRF and JRMC Yokosuka facility in Japan. Key requirements include the submission of a Certificate of Quality Compliance with every shipment and strict adherence to continuous identification markings, which must include the contract delivery order number, NSN, specification number, and manufacturer details. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award. Packaging and marking must comply with MIL-STD-129 and DLA packaging requirements, with a delivery window of five days after the order.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE86-26-T-2177

This contract is for the procurement of cold finish, annealed round metal bars with a diameter of 1.125 inches and lengths between 10 and 12 feet, weighing 3.380 lbs per foot. The material must be supplied in whole foot lengths and comply with ASTM A 582/A 582M-05 and SAE AMS2806 standards. A Certificate of Quality Compliance is mandatory for every shipment and must be forwarded to the DLA Troop Support Contracting Officer. Eligibility for award is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) or Manufacturers (QSLM). Strict marking requirements apply, including the delivery order number, NSN, specification number, grade, manufacturer name, and dimensions, which must be legible and waterproof. Packaging and marking must adhere to MIL-STD-129, MIL-STD-163, and RP001 requirements. The delivery is FOB Destination to Kadena AB, Okinawa, Japan, with a required delivery date of September 1, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPEA46-26-T-25MJ

This contract is a solicitation for the procurement of 227 spring pins, identified by NSN 5315-00-411-4394 and part number MS171790. The items are classified as critical application items and must adhere to technical and quality requirements set forth in the DLA Master List, including specific standards for packaging, marking, and inspection at the point of origin. Delivery is required within 185 days, with a required delivery date of March 14, 2027, shipping FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The agreement mandates strict compliance with mercury-free requirements, prohibiting the intentional addition of mercury or mercury compounds to the hardware or packaging. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required for acceptance in certain sampling plans. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, ensuring all items are properly identified and preserved for transport.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Padeye Forging Blanks

Solicitation # N0016726Q1159

The Naval Surface Warfare Center Carderock Division is soliciting a firm fixed price purchase order for six padeye forging blanks to support the Virginia Class propulsor program. This procurement is set aside for small businesses under NAICS code 332111. The successful contractor will be responsible for providing all labor, equipment, and materials to procure the blanks in accordance with technical drawing 245-8936005 Rev A and delivering them to the Naval Foundry and Propeller Center in Philadelphia, Pennsylvania. The solicitation requires the use of domestic materials per DFAR Specialty Metal requirements and specifies that shipping terms are FOB Destination. The award will be made to the responsible quoter with a technically acceptable quote determined to be the most advantageous to the government, considering price and past performance. Technical acceptability is evaluated on a pass/fail basis. Key deliverables include a certification package consisting of a First Article Forging Report (CDRL A001) and a Test/Inspection Report (CDRL A002), which must include material certifications, full dimensional inspection, and post-machining MT inspection. Following an amendment, the response deadline for this solicitation is 10:00 EDT on Tuesday, September 8, 2026. Invoicing and payment must be processed electronically through the Wide Area Workflow system.

POSTED

DEADLINE

Precision Metal Spacer Plate ManufacturingThis subcontract with the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, involves the manufacture of 8,664 precision-engineered spacer plates. The scope of work encompasses the entire production lifecycle, including material sourcing, machining, finishing, quality control, packaging, and detailed documentation, all of which must adhere to strict military specifications. The opportunity is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 332111. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by September 8, 2026, following the posting date of August 31, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Sleeve Bushing Manufacturing and SupplyThis subcontract involves the manufacture and supply of precision-machined sleeve bushings under NSN 5365016448042 for the Department of Defense, specifically the ASC Supplier Oper AE and AF Div. The scope of work encompasses the entire production lifecycle, including material sourcing, precision machining, rigorous quality control, and adherence to military specifications for packaging and labeling. The project falls under NAICS code 332111 and is to be performed at FPO 96694. Interested parties must submit their responses by September 8, 2026, following the posting date of August 31, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE8E9-26-T-3537

Solicitation SPE8E9-26-T-3537 is a fixed-price request for quotations issued by DLA Troop Support for the procurement of 938 feet of 4130 chrome-moly steel metal bar. The material must have a 0.500 inch diameter and be supplied in whole feet lengths between 10 and 12 feet, with a reference weight of 0.67 lb/ft. Delivery is required within 153 days, with a need ship date of February 1, 2027, and shipment is designated FOB Origin to DLA Distribution Warner Robins in Georgia. A quantity variance of plus or minus 10 percent is permitted. Compliance with the Qualified Suppliers List for Distributors (QSLD) is mandatory, and only listed suppliers are eligible for award. The contractor must provide a Certificate of Quality Compliance (Mill-Material Certification) with every shipment. Strict marking requirements are in effect per MIL-STD-129 and ASTM A700, including continuous identification markings such as the contract delivery order number, NSN, and heat/lot number; failure to comply with these markings is grounds for product rejection. Packaging must adhere to MIL-STD-2073-1E and ASTM A700. Inspection and acceptance will occur at the destination. The solicitation also incorporates Buy American Act and Berry Amendment restrictions, and offers a price evaluation preference for certified HUBZone small businesses.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

in about 16 hours

PIN, STRAIGHT, HEADED

Solicitation # SPE4A6-26-T-25DV

This solicitation, identified as SPE4A6-26-T-25DV and issued by the Department of Defense Aviation ASC Commodities Division, is for the procurement of 426 units of straight headed pins under NSN 5315-00-617-7112. The contract requires delivery within 202 days after order and is categorized under NAICS code 332111. Performance is centered in Tracy, California, with the primary point of contact being Christopher Montgomery. The agreement incorporates strict technical and quality standards, including DLA packaging requirements, physical item marking, and specific sampling methods based on MIL-STD-1916 or ASQ H1331. It mandates compliance with Cybersecurity Maturity Model Certification Level 2 and requires the removal of government identification from non-accepted supplies. Furthermore, the contract is subject to stringent export controls under ITAR and EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specialized training to access technical data.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

VALVE, PNEUMATIC TIRE

Solicitation # SPE7L7-26-T-5080

This contract is for the procurement of four pneumatic tire valves, identified by NSN 2640008572891 and part numbers VS-740-1-GOVT or 717-7. The valves must be size TR-717-02, feature an off-center position, and utilize a screw-in tube application method. A critical environmental requirement prohibits the use of Class I ozone depleting chemicals in the delivered items. The order is issued by the Defense Logistics Agency with a delivery requirement of 20 days after order. Shipping is FOB Origin and destined for the Parts-Attach General Depot in Tainan City, Taiwan. Packaging and marking must comply with MIL-STD-129 and MIL-STD-2073-1E, as well as DLA packaging requirements for procurement.

Industrial Valve Manufacturing

POSTED

about 8 hours ago

DEADLINE

DUCT ADAPTER KIT, AIR C

Solicitation # SPE8E8-26-T-5476

This contract, identified as SPE8E8-26-T-5476, is issued by the Defense Logistics Agency for the procurement of seven air conditioner duct adapter kits. The items are identified by NSN 4130-01-565-5614 and part number 5-199-00-000-024 from Fluid Handling LLC. Delivery is required within 167 days, with a required delivery date of February 10, 2027, and a need ship date of March 1, 2027. The shipment is to be delivered FOB Origin to DLA Distribution Norfolk, Virginia. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-2073-1E and MIL-STD-129. It includes a prohibition on the intentional addition of mercury or mercury-containing compounds, with specific exceptions for functional components as defined by NAVSEA. Inspection and acceptance will take place at the destination. The contract also incorporates technical and quality requirements from the DLA Master List and notes that covered defense information potentially applies.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7L7-26-T-5085

This contract is a solicitation by the Defense Logistics Agency for the procurement of one power supply unit, identified by NSN 6130-01-687-9026 and part number 1600902-1 from Thales Defense & Security Inc. The delivery is required within 20 days after the order, with a final required delivery date of August 25, 2026. The item is to be delivered FOB Origin to the 0325 CS BN CO A Maintenance facility at Schofield Barracks, Hawaii. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in certain sample lots. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required and specified by NAVSEA.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

ANGLE, STRUCTURAL

Solicitation # SPE8E4-26-Q-0397

This contract is for the procurement of 30 feet of structural steel angle measuring 4 by 4 inches with a thickness of 0.312 inches. The material must be supplied in whole foot lengths between 30 and 40 feet and must adhere to MIL-S-22698 and ABS Rule Part 2, including the AB identification marking. A critical requirement is that all material must have an ABS Surveyor's endorsement on the certificates to be accepted. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for the award. Comprehensive documentation is required, including a Certificate of Quality Compliance and specific continuous identification markings such as the contract delivery order number, NSN, and manufacturer details. Packaging and marking must comply with MIL-STD-129 and ASTM A700, with delivery expected within 30 days after the order.

Fabricated Structural Metal Manufacturing

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE3SE-26-Q-0457

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE3SE-26-Q-0457 for the procurement of two units of a non-NSN item identified by part number 7310GM5022323. This federal requirement is tracked under purchase request 7018102192. The solicitation was posted on September 2, 2026, with a response deadline set for September 10, 2026. Interested parties can find further details and submission guidelines through the DIBBS portal.

POSTED

about 8 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-T-5088

This contract is for the procurement of five wet charged lead acid storage batteries, specifically East Penn Manufacturing Co. part number 24M-5, under NSN 6140-01-457-2450. The items are classified as DOT Class Corrosive and must be shipped as batteries wet filled with acid. They carry a non-extendable shelf life of six months and must be delivered FOB destination within ten days. The supplier must comply with strict safety and quality standards, including the submission of Safety Data Sheets and hazardous communication labels per Federal Standard 313-E and OSHA requirements. Packaging must adhere to MIL-STD-2073-1E, MIL-STD-129, and UN requirements using 4G fiberboard boxes. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in sample lots.

Battery Manufacturing

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7L7-26-T-5089

This contract, identified as SPE7L7-26-T-5089, is a solicitation by the Defense Logistics Agency for the procurement of battery covers under NSN 6160014747458. The agreement consists of three separate line items, each for a quantity of one unit, with delivery required within five days. Shipments are destined for various locations, including Fort Riley, Kansas, Grand Prairie, Texas, and Parkersburg, West Virginia. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, and palletization per RP001. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans. Terms specify FOB Origin with inspection and acceptance occurring at the destination, and a zero percent quantity variance is permitted.

Battery Manufacturing

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7L7-26-T-5083

This contract is for the procurement of two power supply units, part number FH-64-A from Teledyne FLIR Defense, LLC, under solicitation number SPE7L7-26-T-5083. The items are identified by NSN 6130-01-619-5734 and are to be delivered FOB Origin to Fort Stewart, Georgia, within 20 days. The required delivery date is set for August 25, 2026. The agreement mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, and requires the removal of government identification from non-accepted supplies. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with zero-based sampling plans applied. Additionally, the contractor must comply with CMMC Level 2 self-assessment standards and other technical requirements listed in the DLA Master List.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

VALVE, FLOW CONTROL

Solicitation # SPE7MC-26-T-247V

This contract is for the procurement of one flow control valve, identified by NSN 4820-99-840-6192, for the Defense Logistics Agency. The item is designated as a critical application item and must be delivered FOB destination to the USS Michael Monsoor DDG 1001 within 20 days. The required delivery date is set for August 14, 2026. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129. There are explicit prohibitions against the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA specifications. All shipments must be sent via the fastest traceable means, and parcel post is prohibited.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 8 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-T-5087

This contract is a solicitation from the Defense Logistics Agency for the procurement of two lead acid AGM storage batteries, specifically part number GPL-4DA from Concorde Battery Corporation. The items are identified by NSN 6140-01-596-7978 and are subject to a non-extendable shelf life of 18 months. Delivery is required within five days after receipt of order, with the destination being the U.S. Naval Air Facility Atsugi in Japan. The agreement mandates strict adherence to several military standards, including MIL-STD-129R and MIL-STD-130N for marking and identification, and MIL-STD-2073-1E for packaging. Quality assurance will be conducted via sampling methods according to MIL-STD-1916 or ASQ H1331. Additionally, the contract specifies that mercury must not be intentionally added to the hardware, except for functional use within the batteries, and requires the provision of MSDS/PSDS documentation per FED-STD-313.

Battery Manufacturing

POSTED

about 8 hours ago

DEADLINE

CUTTER BIT, TOOL HOLDER

Solicitation # SPE8E5-26-T-4250

This contract is for the procurement of five cutter bit tool holders under solicitation SPE8E5-26-T-4250 for the Defense Logistics Agency. The items must adhere to specific technical dimensions, featuring a square cross section of 9/16 inch and an overall length of 4 inches with ground sides. The procurement follows federal commercial item standards and requires compliance with the DLA Master List of Technical and Quality Requirements, including specific sampling methods per MIL-STD-1916 or ASQ H1331. Delivery is required within 20 days, with shipping designated as FOB Origin and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA requirement RP001. The items are to be shipped via traceable means to the USALRCTR at Fort McCoy, Wisconsin.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 8 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-T-5091

This contract is for the procurement of two wet-charged lead acid storage batteries, identified by NSN 6140014572420 and East Penn Manufacturing part number 1131PMF. The items are classified as hazardous materials, specifically corrosive Class 8, UN ID UN2794, and require strict adherence to Federal Standard 313-E for Safety Data Sheets and OSHA Hazard Communication Standard labeling. The batteries have a non-extendable shelf life of six months and must be delivered FOB destination to Camp Arifjan, Kuwait, within 10 days of order. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with a requirement for zero non-conformances in sample lots. Packaging must comply with MIL-STD-2073-1E and UN requirements using 4G fiberboard boxes, while marking must follow MIL-STD-129. Additionally, the contract prohibits the intentional addition of mercury except where functionally required, and requires the removal of government identification from any non-accepted supplies.

Battery Manufacturing

POSTED

about 8 hours ago

DEADLINE