Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

LOKRING TOOL KIT

Awarded

SPMYM226Q5931Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPMYM226Q5931 is a total small business set-aside award issued by DLA Maritime - Puget Sound for the procurement of four LOKRING Tool Kits (Part# 9080236) used to install 2 inch stainless steel fittings. The acquisition is a sole source procurement justified by the proprietary Elastic Strain Preload technology owned by LOKRING Technology LLC, which is the sole manufacturer and distributor. The contract requires delivery to the Puget Sound Naval Shipyard IMF in Bremerton, Washington, with a delivery deadline of April 3, 2026. The contractor must adhere to strict military standards for packaging and marking, including ASTM-D-3951 for commercial packing and MIL-STD-129 and MIL-STD-130 for shipment labeling and Unique Item Identification. All components must be marked with Data Matrix symbology and registered in the DoD IUID Registry. Invoicing must be processed exclusively through the Wide Area WorkFlow system. Inspection and acceptance are conducted by the government at the destination. The contract is managed by Contracting Officer Jack Edwards and falls under NAICS code 332510.

General Info

Agency

Department Of Defense → DLA Maritime - Puget SoundView Agency

Contract Value

$37,383.48

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

Bremerton, WA, 98314, USA

Set-Aside

SBA

Awardee

CALEDONIA PIPEWORK LLCView Profile

Award Issued Date

04/09/2026, 12:00:00 AM UTC

Documents

(2)

Sole Source Justification for LOKRING Tool Kit Purchase

PDF•justification-and-authorization

Solicitation SPMYM226Q5931 for LOKRING TOOL KIT

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded

PostedApr 1

Solicitation

AwardedApr 9

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Maritime - Puget Sound

Contacts1 person available

OfficeBREMERTON, WA, 98314-5000, USA

Organization / Agency

Department Of Defense → DLA Maritime - Puget Sound

View Agency Profile

Office AddressBREMERTON, WA, 98314-5000, USA

Contacts

JACK EDWARDS

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=382aeb0731a340f88fc711fbc70e891c

Similar Contracts

Same NAICS industry code

Supply of Clamp, Block (NSN: 5342016858223)

LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Supply of Lock Pins (NSN 5315005970499)

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

Supply of Flat Washers (NSN 5310-00-995-1197)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

STUD ASSEMBLY, TURNL

Solicitation # SPE4A6-26-T-26TH

This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 13 turnlock stud assemblies, identified by NSN 5325-00-594-6267. The contract requires a rapid delivery turnaround of 5 days after the order is placed. Performance is centered in Oklahoma City, and the procurement falls under NAICS code 332510. Strict compliance is required regarding cybersecurity and data handling, specifically necessitating CMMC Level 2 certification through a C3PAO and adherence to Covered Defense Information standards. The technical data is subject to ITAR and EAR export controls, meaning access is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training. Additionally, the contractor must follow specific DLA packaging requirements, source approval documentation, and configuration change management protocols for any engineering variances.

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

FASTENER SNAP ASSEM

Solicitation # SPE4A6-26-T-26RJ

This solicitation, issued by the ASC Commodities Division of the Department of Defense, is for the procurement of 45 fastener snap assemblies under NSN 5325-01-191-3418. Each assembly must include one metallic eyelet (MS27980-8B), one cap snap fastener (MS27980-2B), one stud snap fastener (MS27980-7B), and one socket snap fastener (AN227-7B). The delivery requirement is set for 20 days after the order is placed. The contract is fully competitive and adheres to specific military and federal standards, incorporating DLA master lists for technical and quality requirements. Key compliance mandates include DLA packaging requirements, the removal of government identification from non-accepted supplies, and specific physical item marking. While covered defense information may apply, item unique identification is not required by the service customer. Interested parties must respond by September 11, 2026.

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

PIN, GROOVED, HEADLESS

Solicitation # SPE4A7-26-T-695J

Solicitation SPE4A7-26-T-695J is a fixed-price request for quotations issued by the Department of Defense, specifically DLA Aviation, for the procurement of eight headless grooved pins identified by NSN 5315-01-417-8548. The requirement is managed under NAICS code 332510, with an original required delivery date of May 25, 2027. Delivery is set for FOB Origin, with the final destination being DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to packaging and marking standards, including MIL-STD-2073-1E for packaging data, MIL-STD-129 for marking, and RP001 for DLA packaging requirements. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements under RA001. Offerors must comply with the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Payment processing must be conducted electronically through the Wide Area WorkFlow system.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

WHEEL, SOLID, METALLIC

Solicitation # SPE7LX-26-U-9815

Solicitation SPE7LX-26-U-9815 is a Service-Disabled Veteran-Owned Small Business set-aside issued by the Department of Defense, specifically the DLA Land and Maritime Strategic Acquisition Program Directorate. The requirement is for the procurement of 56 metallic solid wheels, identified by NSN 5340010635825. This is a unilateral Indefinite Delivery Contract with a maximum value of 350,000 dollars, a guaranteed minimum quantity of 8 units, and a minimum delivery order quantity of 14 units. Delivery is expected within 210 days after receipt of the order, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to several technical and regulatory standards, including CMMC Level 2 certification and the prohibition of Class I ozone-depleting chemicals. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements, with specific attention to special packaging instruction AK10635825. Technical data is subject to ITAR and EAR export controls, requiring approved US/Canada Joint Certification Program certification for access. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Additionally, offerors must comply with the Buy American Act and the Berry Amendment, providing disclosure for any non-domestic materials used.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE7L5-26-T-5309

This contract, identified as SPE7L5-26-T-5309, is a solicitation for the procurement of 322 units of shims, identified by NSN 5365-00-597-5111 and part number 16702313 from Fairbanks Morse, LLC. The order is managed by the Department of Defense Land Supplier Operations Engines, with delivery required within 105 days. The shipment is destined for Arizona Industries for the Blind in Phoenix, Arizona, with a required delivery date of August 14, 2026. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by ISO 9001:2015 standards, and inspection and acceptance will occur at the point of origin. Additionally, the contract prohibits the intentional use of mercury or mercury-containing compounds in the hardware, preservation, or packaging, except for specific functional exceptions. Sampling for quality control must follow MIL-STD-1916 or ASQ H1331 guidelines.

LAND SUPPLIER OPNS ENGINES

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE7L5-26-T-5310

This contract is for the procurement of 595 lock pins, identified by NSN 5315012977866 and part number 16101188 from Fairbanks Morse, LLC. The order is managed under purchase request 7015050966 with a delivery requirement of 41 days after order. Shipping is designated as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, as well as palletization requirements per RP001. A critical environmental restriction is included, prohibiting the intentional addition of mercury or mercury-containing compounds to the hardware, except in specific functional cases approved by NAVSEA. The required delivery date is set for July 3, 2026.

LAND SUPPLIER OPNS ENGINES

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE4A6-26-T-25XV

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-10U2

Solicitation SPE7L1-26-T-10U2 is a request for quotations issued by the Defense Logistics Agency for the procurement of 46 nonmetallic bumpers, identified by NSN 5340-01-148-8935. This is designated as a critical application item with a non-extendable shelf life of 60 months. The procurement incorporates specific technical and quality requirements, including the prohibition of class I ozone depleting chemicals and adherence to AMS 5513 for metallic components. The required delivery date is February 22, 2027, with a need ship date of January 16, 2027, for delivery to the DLA Distribution Depot Hill at Hill AFB, Utah. The contract mandates destination inspection and acceptance, utilizing sampling methods per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with specific requirements for hazardous materials and shelf-life marking. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information. Offerors must submit quotes via the DIBBS system by September 21, 2026.

LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE4A6-26-T-70B4

The contract pertains to the procurement of 108 blind rivets with the NSN 5320-00-113-1665, issued under solicitation number SPE4A6-26-T-70B4 by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on May 25, 2026, with a response deadline of June 2, 2026, and falls under the NAICS code 332722, which corresponds to the manufacture of rivets and similar fasteners. There is no set-aside designation applied to this solicitation, indicating it is open to all eligible contractors without preference for small businesses or other categories. The place of performance and official office address details are not specified, though the contracting entity is based in the United States. Interested parties must submit responses through the DIBBS portal using the provided UI link before the deadline to be considered for award.

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Maritime - Puget Sound

Same awarding agency

IUID Marking and Data Registration

Marking Device Manufacturing

POSTED

DEADLINE

Precision Gear Component Fabrication

Semiconductor Machinery Manufacturing

POSTED

DEADLINE

COTS Technical Manuals and Supplemental Data Provider

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Fire System Booster Pump Unit Manufacturer/Supplier

Pump and Pumping Equipment Manufacturing

POSTED

DEADLINE

8010 FIRE SYSTEM BOOSTER PUMP UNITS

Solicitation # SPMYM226Q0103

This solicitation, numbered SPMYM226Q0103, is issued by the Department of Defense through DLA Maritime - Puget Sound for the procurement of 8010 fire system booster pump units. The project is categorized under NAICS code 333914 and is designated as a total small business set-aside. Interested parties must refer to the attached bill of materials, drawings, salients, and CDRL documents to ensure full compliance with the technical specifications. The response deadline for this opportunity is September 14, 2026. Performance will take place in Silverdale, Washington, and the primary point of contact for this requirement is Tricia Wintersteen. All inquiries and submissions should be directed to the DLA Maritime office located in Bremerton, Washington.

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

DEADLINE

RING GEAR ASSEMBLY

Solicitation # SPMYM226Q0173

Solicitation SPMYM226Q0173 is a total small business set-aside issued by DLA Maritime - Puget Sound for the procurement of a Ring Gear Assembly and Worm Gear. The requirement is identified as a sole source procurement from Tri Tool Inc, who is the proprietary designer and manufacturer of the associated machining system. The estimated contract value ranges from 15,000 to 350,000 dollars, with an estimated delivery date of September 30, 2026. Supplies are to be delivered FOB Destination to the receiving office in Silverdale, Washington. To be considered responsive, offerors must submit a signed and completed solicitation via email to Armando Saya by September 14, 2026, at 10:00 AM PST. Key submission requirements include providing the contractor's cage code, point of contact, lead time, and manufacturer details. Contractors must comply with NIST SP 800-171 unless the items are identified as Commercial Off The Shelf. Award will be based on technical acceptability, price, and past performance ratings. Invoicing must be processed electronically through the Wide Area Work Flow system. Packaging must adhere to ASTM-D-3951 and MIL-STD-129 standards, though the specific gear assemblies are exempt from Unique Item Identification requirements.

Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

DEADLINE

12-GANG LOAD CENTER

Solicitation # 26Q7906PRESOLICITATION

DLA Weapons Support Puget Sound is seeking a firm-fixed-price supply contract for 20 12-gang load centers and 12 distribution boxes for welding units. This procurement, identified by solicitation number SPMYM226Q7906, is designated as a 100 percent small business set-aside and will utilize commercial and simplified acquisition procedures. The Non-Manufacturer Rule applies to this requirement, and the final delivery will be FOB Destination to Silverdale, Washington. The solicitation is expected to be posted on SAM.gov around September 14, 2025. Interested contractors must monitor the site for amendments and submit any inquiries in writing via email. Additionally, awardees required to implement NIST SP 800-171 must provide a current assessment as detailed in DFARS 252.204-7019 to be considered for the award.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

SHORE POWER CABLE

Solicitation # 26Q0217PRESOLICITATION

DLA Weapons Support Puget Sound is seeking a firm-fixed-price contract for the procurement of shore power cables. The requirement includes two 150-foot DLO 3/0 cables with specific AX8982 and Russell Stoll connectors, eight 150-foot cables, and four 220-foot cables, all terminated with M24368/5 and M24368/1 plugs. The contract falls under NAICS code 335999 and PSC 5935, with delivery specified as FOB Destination to Silverdale, Washington. This opportunity is intended as a 100 percent small business set-aside and will be conducted using commercial and simplified acquisition procedures. The solicitation, numbered SPMYM226Q0217, is expected to be posted on SAM.gov around September 14, 2025. Eligible contractors must comply with the Non-Manufacture Rule and, if applicable, provide a current NIST SP 800-171 assessment as required by DFARS 252.204-7019.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Supply of Setting Rings (2.4" and Other Sizes)This subcontract, issued by the Department of Defense through DLA Maritime - Puget Sound, requires the supply of 14 precision setting rings designed for the calibration and verification of TESA/Brown & Sharpe internal micrometers. The order specifically includes a 2.4 inch ring and requires all units to be compatible with the 599-281 series system while providing certified dimensional accuracy. The contract is designated as a total Small Business Set Aside under NAICS code 332212. Performance for this requirement will take place in Bremerton, Washington, with the solicitation posted on August 10, 2026.

Hand and Edge Tool Manufacturing

POSTED

about 1 month ago

DEADLINE

Supply of TESA/Brown & Sharpe Intrimik Internal Micrometers (0.7"–7.0")This subcontract, issued by the Department of Defense through DLA Maritime - Puget Sound, involves the procurement of 29 TESA/Brown & Sharpe Intrimik precision internal micrometers. These analog tools, ranging from 0.7 to 7.0 inches, are designed under the ABBE principle to ensure high-accuracy measurements and will serve as direct replacements for existing 599-281 series tools within PSNS toolrooms and calibration laboratories. The contract is designated as a total Small Business Set Aside under NAICS code 332212. Performance of the contract will take place in Bremerton, Washington, with the official posting date set for August 10, 2026.

Hand and Edge Tool Manufacturing

POSTED

about 1 month ago

DEADLINE

Warranty, Maintenance & Repair ServicesThis contract provides comprehensive post-delivery technical support, preventive maintenance, and repair services specifically for HandyScan 3D scanning units operated in industrial environments. The services are designed to ensure uninterrupted performance and longevity of the equipment, with all work performed in accordance with industry standards and under the oversight of the Department of Defense through DLA Maritime - Puget Sound. The scope encompasses proactive maintenance measures to prevent system failures, timely repairs to restore functionality, and responsive technical assistance tailored to the high-demand conditions of industrial use. The contract is structured as a small business set-aside under the SBA program, with the NAICS code 811212 indicating it pertains to electronic and precision equipment repair and maintenance. Performance is required at the designated location in Bremerton, Washington, with a zip code of 98314. Although the solicitation number and point of contact are not provided, the contract was posted on July 1, 2026, and is classified as a subcontract under federal procurement regulations. All work must comply with federal standards and be executed by a qualified small business entity to meet the set-aside requirement.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

On-Site Installation & System Integration ServicesThe contract entails on-site installation, calibration, and full integration of advanced 3D scanning systems with existing software and hardware infrastructure at the Puget Sound Naval Shipyard in Bremerton, Washington, with a zip code of 98314. The work involves ensuring seamless compatibility between the new scanning technology and current military-grade systems, requiring specialized technical expertise to support naval operations and maintenance workflows. All services must be performed directly at the facility, with no remote or off-site alternatives permitted. This is a subcontract awarded under a Total Small Business Set-Aside classification per FAR 19.5, meaning only small businesses are eligible to bid, and the North American Industry Classification System code 238990 applies to other specialized construction services. The contract is managed by DLA Maritime under the Department of Defense and was posted on July 1, 2026, with performance expected to occur at the shipyard location. The nature of the work demands compliance with federal defense standards, secure handling of proprietary systems, and coordination with shipyard personnel to minimize operational disruptions during implementation.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS