Top

Low-Pressure Quick Insert Valves Supply

Active

State & Local

Response Deadline08/27/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Georgia → Dekalb County GovernmentView Agency

NAICS

332911 - Industrial Valve ManufacturingView NAICS

Place of Performance

GA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 27

Submission deadline

Response Deadline

08/27/2026, 08:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyGeorgia → Dekalb County Government

ContactsNo contacts available

OfficeN/A

Organization / Agency

Georgia → Dekalb County Government

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of low-pressure quick insert valves for non-pressurized or low-stress pipeline applications in municipal water systems.

Similar Contracts

Same NAICS industry code

NAICS: 332911

New

DIBBS

VALVE, SAFETY RELIEFThe contract is for the procurement of ten safety relief valves identified by NSN 4820010147872 and part number 38-483 from HYDRO-AIRE AEROSPACE CORP, designated as a critical application item for the E/I E-3A AWACS aircraft. The requirement is issued under solicitation SPE7MC-26-T-155X with a delivery window of 200 days and a final delivery deadline of October 24, 2025, though an earlier ship date of June 3, 2025, is preferred. The valves must be delivered FOB origin with zero tolerance for quantity variance and are subject to inspection and acceptance at the destination. All packaging and labeling must comply with MIL-STD-129 and ASTM D3951, but DLA Master List of Technical and Quality Requirements take precedence over ASTM standards. Packaging and palletization must adhere to DLA’s RP001 requirements. The delivery address is the DLA Distribution Depot in Tinker AFB, Oklahoma, and transportation logistics follow DLAD Proc Note C19 and C20. The unit of issue is each, with a total contract value based on a unit price for ten units. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List in effect on the relevant solicitation or award date, depending on procurement scale. The point of contact for the contract is Alex Xanthakis at DLA Procurement, with the solicitation posted July 27, 2026, and responses due by August 7, 2026.

POSTED

DEADLINE

PARTS KIT, DIAPHRAGM REThe contract specifies the procurement of a Parts Kit, Diaphragm Replacement, with a quantity of six units under the NSN 4820-01-673-8665 and part number 9910-KIT1721, issued by the DLA New Cumberland Facility under solicitation SPE7MC-26-T-139P. The delivery is set for 163 days after order placement, with an original required delivery date of October 14, 2026, and a need ship date of January 7, 2027. All items must be shipped FOB origin to the designated delivery point at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002, with inspection and acceptance occurring at the destination. Packaging must strictly adhere to MIL-STD-2073-1E, including Appendix D for kits, and palletization must meet DLA’s RP001 requirements. Preservation and packaging data fields are coded as ZZ or Z where applicable, indicating contractual or custom specifications. Marking requirements follow MIL-STD-129, mandating barcoding and labeling, including a special marking code of ZZ for unique contract requirements. Hazardous materials, if any, must comply with OSHA’s Hazard Communication Standard and require pre-award submission of Safety Data Sheets, with labeling also meeting MIL-STD-129. Clause 52.223-3 includes a fill-in table for hazardous material identification, while 252.223-7001 reinforces labeling obligations. The contract employs a fixed-price structure with a 0% variance on quantity. The solicitation references compliance with FAR and DFARS clauses related to cybersecurity, trafficking, employment verification, sustainable products, and contractor reporting of cyber incidents. The Unique Entity Identifier and CAGE code are required for representation, and the offeror must confirm small business status, though no socioeconomic set-aside is specified. Payment is to be processed via Wide Area WorkFlow, and the contract includes clauses for contractor accountability, whistleblower rights, and limitation on use of third-party cyber incident data. No pricing details are present in the available data, and the contract value remains undefined. No attachments or formal evaluation factors are provided in the solicitation package, and no Contracting Officer’s Representative or technical point of contact is named, with

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

VALVE, STOP-CHECKThe contract pertains to the procurement of eight units of a stop-check valve identified by NSN 4820-01-514-8060, with a unit price of $8.00 per unit and a total value of $64.00, under solicitation SPE7MC-26-T-136P issued by DLA Land and Maritime, San Joaquin. Delivery is required within seven days of the contract award, with origin FOB terms, and must be shipped to the designated receiving warehouse in Tracy, California. The item is subject to the DLA Master List of Technical and Quality Requirements, which supersedes all other standards including ASTM D3951 for packaging, and mandates compliance with MIL-STD-129 for marking and labeling. Palletization must follow RP001 DLA Packaging Requirements, and the valve must be free of intentional mercury or mercury-containing compounds except for specific functional exemptions such as batteries, instruments, weapon systems, or reagents as defined by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The contract incorporates numerous FAR and DFARS clauses addressing cybersecurity, safeguarding defense information, reporting cyber incidents, prohibited communications equipment, whistleblower protections, trafficking in persons, employment eligibility verification, equal opportunity for workers with disabilities, hazardous material identification, sustainable product requirements, and the buy American Act. Offerors must maintain active SAM registration and submit accurate representations regarding small business status, covered defense telecommunications equipment, and socioeconomic certifications, with compliance verified through SAM. A Safety Data Sheet for any hazardous materials is mandatory for award eligibility, and failure to submit one renders the offeror nonresponsible. The contract also requires adherence to DPAS priority rating for national defense purposes, with cost or pricing data governed by a deviation to DFARS 252.215-7994, and mandates use of WAWF for invoicing and receiving reports unless exceptions apply. All documentation and performance must comply with federal regulations including NIST SP 800-171 requirements, and any non-domestic materials necessitate full disclosure. The solicitation is not a small business set-aside but allows for HUBZone price evaluation preferences unless waived.

POSTED

DEADLINE

VALVE, SAFETY RELIEFThe contract is for the procurement of 11 units of a safety relief valve identified by NSN 4820-01-302-8976, issued under solicitation SPE7MC-26-T-138U by the Defense Logistics Agency (DLA) San Joaquin. Delivery is required to the receiving warehouse in Tracy, California, with an original required delivery date of October 14, 2026, and a need ship date of January 13, 2027, allowing for a 169-day delivery window as directed. The item is classified as a critical application item and is subject to strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. The valve must be packaged in accordance with MIL-STD-2073-1E using preservation method AE, with cleaning and drying procedures specified, and marked per MIL-STD-129 with no special marking required. Palletization must comply with DLA Packaging Requirements RP001. The contract prohibits the use of Class I ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except in specified functional applications such as batteries, fluorescent lights, and instruments as authorized by NAVSEA 5100-003D, which also mandates shock-proof design with a secondary containment for portable mercury-containing devices. Inspection and acceptance are performed at origin by the government under FAR 52.246-2 and DLA requirements, with no tolerance allowed in quantity—plus or minus zero percent. Payment must be submitted electronically through Wide Area WorkFlow (WAWF), and invoicing follows DFARS requirements for electronic submissions. All contractors must comply with federal and defense regulations including FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, cybersecurity safeguards under NIST SP 800-171, prohibition of hexavalent chromium, export control, hazardous material handling, and subcontracting practices. Offerors must provide current Unique Entity ID and CAGE code, and affirm size and socioeconomic status including small business, disadvantaged, veteran-owned, or HUBZone status if applicable, with full compliance with SAM.gov representations. The contract type remains unfilled pending award, and no pricing is stated in the line item, indicating that price evaluation will occur during the selection process. The contract is subject to change under FAR 52.243-1,

POSTED

DEADLINE

DISK, VALVEThe contract pertains to the procurement of a poppet valve, identified by part number V2D10302-4MA and NSN 4820-01-116-6400, with a total quantity of 16 units to be delivered within 31 days from the contract award. The item is classified as a critical application item and must comply with stringent packaging and handling standards as defined by MIL-STD-2073-1E and MIL-STD-129, including specific packaging codes, cushioning materials, and marking requirements. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specified functional uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical reagents authorized by NAVSEA, with portable devices requiring shock-proof construction and a secondary containment barrier. Delivery is FOB origin, inspection and acceptance occur at the destination, and the sole shipment address is the DLA Distribution San Joaquin warehouse in Tracy, California. The contract enforces a zero percent quantity variance and requires adherence to DLA’s packaging and transportation guidelines, including referenced procedures C19 and C20. The solicitation number is SPE7MC-26-T-155Y, issued on July 27, 2026, with responses due by August 7, 2026, and the required delivery date is set for September 8, 2026, aligned with the original required date of September 1, 2026. The unit price is $16.00 per unit, resulting in a total price of $256.00, and the contract is governed by the DLA Master List of Technical and Quality Requirements referenced through R and I numbers, with revisions controlled by the solicitation or award date depending on acquisition size.

POSTED

DEADLINE

VALVE, BALLThe contract is for the procurement of seven ball valves, identified by NSN 4810012336080 and part number 2642-825-85, furnished by Electric Boat Corporation. Each unit must be uniquely identified with an IUID compliant with MIL-STD-130, and serial numbers must be marked on the unit, intermediate, and shipping containers in accordance with MIL-STD-129, with the packing list containing all serial numbers as specified. The valves are subject to strict prohibitions against the intentional use of mercury or mercury compounds in any part of the hardware, packaging, or preservation processes, with limited exceptions for specific applications like batteries, lighting, instruments, weapon systems, or chemical reagents approved by NAVSEA; portable devices containing mercury must be shockproof and include a secondary containment barrier. The use of Class I ozone-depleting substances is strictly prohibited in all manufacturing and testing processes unless explicitly approved in writing by the contracting officer. The item is designated as a critical application item, requiring full compliance with all performance and safety standards. Delivery is FOB origin, with inspection and acceptance occurring at the destination after a 164-day lead time, and no quantity variance is permitted. Packaging must conform to MIL-STD-2073-1E, utilizing the AE preservation method with CA wrapping material and AD cushioning, and all packaging must meet the U packing code with mechanical handling required. Palletization must follow DLA’s RP001 requirements, and blocking and bracing must be designed to immobilize the valves securely within shipping containers to prevent movement during transit, ensuring compatibility with the item’s structure and strength. Special markings include “ARROW UP OPEN THIS SIDE” and “REUSABLE CONTAINER,” per MIL-STD-129 and ASTM D5445. The delivery destination is DLA Distribution Puget Sound in Bremerton, Washington, with the required ship date set for January 19, 2027. Transportation and handling instructions are governed by DLAD Proc Notes C19 and C20. The contract was solicited under SPE7M4-26-T-287V, with a response deadline of August 7, 2026, and falls under NAICS code 332911 for fluid handling equipment manufacturing.

FLUID HANDLING DIVISION

POSTED

DEADLINE

VALVE, SOLENOIDThe contract is for the procurement of a normally closed solenoid valve with part number V14500-02-1 and NSN 4810-00-726-0985, in a quantity of ten units, under solicitation SPE7MC-26-T-156E issued by the Defense Logistics Agency. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA packaging standards, including specific methods for preservation, wrapping, cushioning, and containerization, and all markings must conform to MIL-STD-129 with no special marking codes applied. The delivered items must meet inspection and acceptance criteria at the destination, with zero tolerance for quantity variance. Delivery is required within twenty days of contract award and must be shipped via the fastest traceable means, explicitly prohibiting parcel post. The delivery address is the Naval Air Warfare Center in Point Mugu, California, with freight shipping directed to the same facility. The contract specifies the purchase request number, unit price, and total price, and includes government-only administrative data such as distribution codes and the original required delivery date of July 14, 2026. The vendor, Valcor Engineering Corporation, is required to adhere to all DLA directives and provide supplies in accordance with federal procurement standards.

Defense Logistics Agency

POSTED

DEADLINE

VALVE, SAFETY RELIEFThis contract mandates the delivery of one safety relief valve, identified by NSN 4820-01-737-7146 and part number 400118 from SAUER COMPRESSORS USA, INC., under solicitation SPE7MC-26-T-155V. The item is classified as a critical application product and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specification standards. Ozone-depleting chemicals are strictly prohibited in manufacturing or packaging, and any substitute materials require prior approval unless explicitly authorized. Delivery is required within 20 days to the destination FOB point, with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery site. Packaging must adhere to ASTM D3951 and MIL-STD-129 labeling standards, with palletization following DLA’s RP001 packaging requirements, and unit packaging specified as one unit per pack. The valve must be shipped via traceable transportation methods, exclusively avoiding parcel post, and directed to the vessel shipment address for USS RICHARD M MCCOOL JR LPD 29 at FPO AE 09591. Shipment must be processed using the RDD 777 designation and the assigned VSM identifier, with transportation logistics governed by DLAD PROC NOTES C19 and C20. The required delivery date is July 22, 2026, and the solicitation response deadline is August 7, 2026. The contract falls under NAICS code 332911 and is managed by the Defense Logistics Agency under the Department of Defense, with Paula McClary as the primary point of contact. All documentation, marking, and compliance must align with federal procurement protocols, and the item is subject to government-only tracking and reporting codes for disposition and audit purposes.

Defense Logistics Agency

POSTED

DEADLINE

VALVE, CHECKThe contract calls for the procurement of a single check valve, part number 35833-4IN, manufactured by Milwaukee Valve Co., Inc., with a 4-inch size and NSN 4820-01-554-8677. Delivery is required within 309 days after delivery order issuance, with a need ship date of June 2, 2027, and an original required delivery date of October 14, 2026. The valve must be delivered FOB origin to the designated receiving warehouse in Tracy, California, and must comply strictly with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including barcoding and special handling requirements. No mercury or mercury-containing compounds may be intentionally added to or come into direct contact with the valve, except for specific functional exemptions such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemically specified reagents under NAVSEA 5100-003D, which must include a secondary containment for mercury compounds. The contractor must adhere to all relevant Federal Acquisition Regulation clauses, including those governing cybersecurity (252.204-7012), prohibited materials like hexavalent chromium and covered telecommunications equipment, trafficking in persons, equal opportunity, and employment eligibility verification. The contract enforces strict compliance with DLA’s Master List of Technical and Quality Requirements referenced by R and I numbers, and prohibits the use of prohibited substances under applicable environmental regulations. Payment is to be processed exclusively through WAWF with no other invoicing methods accepted, and the government retains inspection and acceptance authority at the delivery point. The solicitation is fixed-price with a zero percent quantity variance, and no pricing data is provided in Section B, though prior market history indicates similar valves have been procured between $1,126 and $1,325.59 per unit. The contract incorporates numerous DFARS clauses related to supply chain integrity, export controls, whistleblower rights, cybersecurity, and safeguarding government information, with deviations noted for NIST SP 800-171 and subcontracting policies. Offerors must maintain an active Unique Entity ID and CAGE code and complete required socioeconomic representations, including small business or other set-aside status if applicable, and must submit proposals exclusively via the DIBBS portal before the July 30, 2026, deadline.

POSTED

DEADLINE

VALVE, REGULATING, OXYGEThe contract specifies the procurement of 50 units of a regulating valve for oxygen system pressure, identified by NSN 4820017357588 and part number 0799-1848 from ESAB NORTH AMERICA INC, under solicitation SPE7MC-26-T-140C. This is a total small business set-aside contract with a NAICS code of 332911, requiring delivery by March 6, 2027, 221 days from the award date, FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, specifically at the DDSP New Cumberland Facility in Pennsylvania, and all items must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including barcoding and hazardous material labeling. The valve must be preserved using method AE with no preservation material, packed in unit container D3 and intermediate container E5, palletized per DLA’s RP001 requirements, and marked with no special markings. Strict environmental restrictions prohibit the intentional use or incorporation of ozone-depleting chemicals and mercury or mercury-containing compounds, except for limited exempted applications such as batteries, sensors, and certain instruments as defined by NAVSEA 5100-003D, which also mandates secondary containment for portable fluorescent lamps and instruments containing mercury. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, and all work must meet applicable federal specifications and regulations, including the Hazard Communication Standard and sustainable product guidelines. The contract incorporates multiple FAR and DFARS clauses covering employment equity, trafficking in persons, hazardous materials identification, cybersecurity safeguards for covered defense information, whistleblower rights, electronic payment via WAWF, accelerated payments to small business subcontractors, and prohibitions on certain foreign-sourced equipment. Offerors must maintain an active UEI and CAGE code, represent their size status accurately in SAM.gov, and submit proposals exclusively through the DIBBS portal by the deadline of July 30, 2026. No contract value is specified in the pricing section, as the unit price field is incomplete or placeholder, and no option quantities or additional CLINs are provided, leaving the total contract value undefined.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

SEAT, VALVEThe contract pertains to the procurement of two SEAT, VALVE units with NSN 4810013229033 and part number 209154 from Eaton Corporation, under solicitation SPE7M4-26-T-288A. Delivery is required within 164 days from the contract award, with a firm delivery date of January 19, 2027, and a required delivery date of December 10, 2026, under FOB origin terms. The units must be packaged in compliance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, and packaging must also adhere to MIL-STD-129 labeling standards. Palletization must follow RP001 DLA Packaging Requirements for Procurement, and no quantity variance is permitted. Inspection and acceptance occur at the destination, which is DLA Distribution Jacksonville at Building 175, Swan Road, Jacksonville, Florida. The unit of issue is each (EA), with a total quantity of two units at a unit price of $0.00, resulting in a total price of $0.00, indicating this is a no-cost delivery under a government contract. All technical and quality specifications are governed by the DLA Master List, referenced via the provided web portal, with revision control depending on the type of acquisition. The shipping and delivery address is clearly designated, with a point of contact for transportation inquiries. This item is classified as a Critical Application Item, and government identification must be removed from non-accepted supplies.

FLUID HANDLING DIVISION

POSTED

DEADLINE

MAIN VALVE ASSEMBLYThe contract pertains to the procurement of 41 units of the Main Valve Assembly, identified by NSN 4820-01-058-4386, under solicitation SPE7M4-26-Q-0873. Delivery is required within 730 days after award, with inspection and acceptance occurring at the destination. The item must be packaged in full compliance with MIL-STD-2073-1E and DLA packaging requirements, using specified methods including rigid containers, dry environment, and JP-1 wrap material, with marking strictly adhering to MIL-STD-129 and no special marking code applied. Palletization must follow DLA guidelines, and all shipments are to be directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract prohibits intentional use of mercury or mercury-containing compounds in or on the supplied hardware, except for specified functional applications such as batteries, fluorescent lights, sensors, controls, weapon systems, and authorized chemical reagents, with portable mercury-containing items requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. Configuration changes require formal engineering change proposals or variance requests, and specific components including the piston, set screw, disc, and stem must have government identification removed if not accepted. The unit of issue is each, with zero tolerance for quantity variance, and the item is classified as a critical application item supplied by Leslie Controls, Inc. with part numbers 14632N and N69035. The government’s material need date is August 11, 2027, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation or award date depending on acquisition size.

FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in about 5 hours

View Details

More opportunities from Georgia → Dekalb County Government

Same awarding agency

NAICS: 484220

New

SLED

Packaging, Labeling, and Delivery Logistics

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Optional Valve Insertion Equipment Supply

Welding and Soldering Equipment Manufacturing

POSTED

DEADLINE

Resilient Wedge Gate Valves Supply

Industrial Valve Manufacturing

POSTED

DEADLINE

Tapping Sleeves Supply

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

High-Pressure Quick Insert Valves Supply

Industrial Valve Manufacturing

POSTED

DEADLINE

2026-034-ITB Quick Insertion Valves (Three (3) Year Multiyear Contract)The County of DeKalb, Georgia is seeking sealed bids for a three-year multiyear contract to supply Quick Insertion Valves and related components for use on both pressurized and non-pressurized pipeline systems. The required items include high-pressure and low-pressure Quick Insert Valves, tapping sleeves, resilient wedge insert gate valves, and optional valve insertion equipment, all of which must meet the Minimum Specifications outlined in the solicitation. Bidders must submit their proposals exclusively through the County’s eProcurement Portal at https://procurement.opengov.com/portal/dekalbcountyga, and no late submissions will be accepted. The deadline for bid submissions is 3:00 pm on Thursday, August 27, 2026. All solicitation documents, including specifications and requirements, are available only through this portal, and interested parties are required to register and access information there to participate. The contract reference number is 2026-034-ITB, with the solicitation number PE-64400-NONST-2027-000000268, and inquiries should be directed to Tina Richardson at tlrichardson@dekalbcountyga.gov.

Industrial Valve Manufacturing

POSTED

DEADLINE

Supply of Valves and FittingsDeKalb County Government is seeking qualified subcontractors to supply water main valves, tapping sleeves, gate valves, and associated fittings in full compliance with county-specific technical and performance standards. The procurement is classified under NAICS code 423720 for plumbing and heating equipment and supplies merchant wholesalers and is structured as a subcontract opportunity with a response deadline of August 19, 2026. All materials must meet DeKalb County’s mandated specifications to ensure compatibility, durability, and safety within the county’s water infrastructure systems. There is no set-aside designation and no formal point of contact listed, but submissions must be made through the official Georgia procurement portal linked in the solicitation, with performance expected to align with county infrastructure requirements.

Plumbing and Heating Equipment and Supplies (Hydronics) Merchant Wholesalers

POSTED

DEADLINE

Traffic Control and Roadway RestorationThe contract requires the implementation of temporary traffic control measures for excavation and installation activities, including the placement of signage, cones, and flagging personnel to ensure public safety and maintain orderly traffic flow during work hours. All measures must comply with standard traffic management protocols to minimize disruption and protect workers and motorists. Upon completion of the work, the contractor is responsible for restoring all affected paved and unpaved surfaces to their original condition or better, addressing any damage caused by construction activities. This subcontract is issued by Dekalb County Government in Georgia under NAICS code 237310, which pertains to highway, street, and bridge construction. The opportunity was posted on July 20, 2026, with a deadline for responses set for August 19, 2026, at 8:00 p.m. Work is to be performed within the jurisdiction of Dekalb County, and while specific location details are not provided, performance is expected to occur on county-owned roadways or infrastructure sites. The contract is accessible through the Georgia Department of Administrative Services portal, and all bidders must meet the specified requirements to qualify for award.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Trench Excavation and ShoringThe contract titled Trench Excavation and Shoring requires the excavation of trenches specifically for valve and tap installations, encompassing full soil removal and dewatering operations where necessary to ensure safe and continuous work conditions. Protective shoring systems must be installed to comply with safety standards and prevent trench collapse during and after excavation activities. The work is categorized under NAICS code 238990, indicating it falls within other specialty trade contractors, and is structured as a subcontract opportunity issued by Dekalb County Government in Georgia. The solicitation was posted on July 20, 2026, with a mandatory response deadline of August 19, 2026, at 8:00 PM Eastern Time. All work must be performed at the location designated by the contracting entity, though specific city and state details are not provided in the data. Interested parties must submit proposals through the official online portal prior to the deadline to be considered for award.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Wet Tap Services on Pressurized MainsDekalb County Government is seeking qualified subcontractors to perform wet tap services on pressurized water mains, requiring the safe installation of live connections without interrupting water service. The work involves precision cutting, fitting, and sealing of taps under pressure to ensure zero leakage and continuous system integrity, demanding specialized equipment, skilled personnel, and strict adherence to industry standards for water utility operations. The contract is classified under NAICS code 238220 for plumbing, heating, and air-conditioning contractors and is open for bids through a subcontracting mechanism with a response deadline of August 19, 2026. All work must be performed in accordance with the county’s operational protocols and safety requirements, though specific performance location details are not provided in the solicitation. Interested parties must submit proposals via the designated online portal prior to the deadline to be considered for award.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Water Main Valve Installation ServicesDekalb County Government is seeking qualified contractors to provide water main valve installation services, encompassing both routine and emergency deployments on active water mains. The scope of work includes full-cycle execution: excavation, shoring, valve installation, pressure testing, and comprehensive site restoration to ensure compliance with public safety and infrastructure standards. All work must be performed with minimal disruption to water service and surrounding infrastructure, adhering to industry best practices and local regulations. The contract is structured as a subcontract under NAICS code 237110 for Water and Sewer Line and Related Structures Construction. Responses are due by August 19, 2026, with the solicitation publicly available through the Georgia Department of Administrative Services portal, though no specific set-aside or organizational type restrictions are noted. Performance will occur within Dekalb County, Georgia, and contractors must be prepared to respond to urgent service needs while maintaining strict quality controls throughout all phases of installation.

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

2026-031-ITB Valve and Wet Tap Installation Services (Three (3)-Year Multiyear Contract)The County of DeKalb, Georgia is seeking qualified contractors to provide valve and wet tap installation services under a three-year multiyear contract, with bids due by 3:00 p.m. on Wednesday, August 19, 2026, through the official eProcurement portal at https://procurement.opengov.com/portal/dekalbcountyga. All solicitation details, including specifications and requirements, are accessible exclusively through this portal, and no late submissions will be accepted. The scope of work involves performing routine and emergency installations on active water mains, including trench excavation, shoring, hydrostatic pressure testing, traffic control, and complete site restoration, all in strict compliance with County standards and using materials supplied by the County unless otherwise directed. Contractors must be prepared to respond to urgent service demands throughout the contract term and demonstrate the capability to meet all technical, safety, and regulatory requirements outlined by the Department of Watershed Management. The solicitation number is 2026-031-ITB, with a reference number of PE-64400-NONST-2027-000000267, and all communications regarding this procurement should be directed to Tina Richardson at tlrichardson@dekalbcountyga.gov. Bidders are required to register and submit proposals through the OpenGov portal, and no paper or off-portal submissions will be considered. This contract is open to all eligible vendors without set-aside restrictions, and performance will be based in DeKalb County, Georgia.

Water and Sewer Line and Related Structures Construction

POSTED

8 days ago

DEADLINE

in 22 days

View Details