Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Combined Synopsis/Solicitation opportunity from National Aeronautics And Space Administration was posted on September 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Lower Wing / Elevon Heater Carriages

Awarded
80NSSC26937774Q-1Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333998
New
SLED
VIB-C ICF-65 Mattress Filling Machine
Solicitation # 130809
The Commonwealth of Virginia Department for the Blind and Vision Impaired is soliciting competitive sealed bids for a spot purchase of one ICF-65 Mattress Filling Machine for its Charlottesville plant. The machine must be designed for filling foam or spring core mattresses, featuring a maximum width of 62 inches, an operating speed of 30 feet per minute, and an operating height of 40 inches. Technical requirements include eight sets of chain conveyors with manual width adjustment, a piece counter with key reset, and Allen Bradley Micro Logix PLC with UL listed controls. The unit must operate on a 208/220 VAC 40 AMP 3 PH power supply and include a manual/auto foot switch with auto indexing. The contract will be awarded to the lowest responsive and responsible bidder, with award priority given to DSBSD-certified micro or small businesses, including women-owned and minority-owned firms. Bidders must submit their electronic bids via the eVA portal by November 6, 2026, including a completed vendor data sheet, state corporation form, small business subcontracting plan, price schedule, and machine diagram. All-inclusive pricing must cover the equipment, delivery, freight, and installation. The machine must be delivered to 1102 Monticello Rd, Charlottesville, VA, and be fully operational by December 15, 2026. Final acceptance is contingent upon a successful operational demonstration to the owner's representative.
Department of Blind and Vision Impaired

POSTED

about 15 hours ago

DEADLINE

in 9 days

AI Contract Overview

Show more

NASA Shared Services Center is soliciting quotes under solicitation 80NSSC26937774Q for the fabrication and delivery of Lower Wing and Elevon Heater Carriage test hardware for the NASA Armstrong Flight Research Center. This firm-fixed-price contract is set aside for small businesses under NAICS code 333998. The scope involves the production of various components, including heater frames, adapter plates, bearing brackets, and axis rods, all of which must be fabricated according to government-furnished design drawings. The target delivery schedule is within 12 weeks of contract award, with a preference for earlier completion. Deliveries are FOB Destination to Edwards, California, and the contractor is required to provide status updates every three weeks. Award will be based on the best value, evaluating price, fabrication duration, technical acceptability, and past performance, with a requirement for three references from the last three years. The contractor must provide a manufacturing process plan and perform dimensional tolerance inspections. Due to the nature of the hardware, strict compliance with U.S. export control laws, including ITAR and EAR, is mandatory. Additionally, the contractor must be registered in the System for Award Management and provide a Cage Code or Unique Entity ID. All contractual inquiries are directed to Tracy Bremer.

General Info

NASA seeks Small Business bids for wing and elevon heater carriages by September 2026.

Contract Value

$142,900

NAICS

333998 - All Other Miscellaneous General Purpose Machinery Manufacturing

Place of Performance

Edwards, CA, 93523, USA

Set-Aside

NONE

Award Issued Date

Documents

6

RFQ 80NSSC26937774Q - Lower Wing / Elevon Heater Carriages

PDF, High priority: read this firstrfq
High

RFQ 80NSSC26937774Q - Lower Wing / Elevon Heater Carriages

PDF, High priority: read this first21 pages · rfq
High

RFQ 80NSSC26937774Q - Lower Wing/Elevon Heater Carriages

PDF, High priority: read this first21 pages · rfq
High

SOW - Lower Wing/Elevon Heater Carriage Fabrication

PDF, High priority: read this firstsow
High

Statement of Work – Lower Wing/Elevon Heater Carriage Fabrication

PDF, High priority: read this first11 pages · sow
High

Q&A - Technical Tolerances

PDF, Low priorityq-and-a
Low

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

3 updates
PhaseAwarded
Posted

Combined Synopsis

Notice updated

Notice details unchanged. Attachments may have changed.

Notice updated

Response deadline changed from Sep 9, 2026 to Sep 16, 2026. Set-aside removed.

Notice updated

The notice description changed.

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyNational Aeronautics And Space Administration → NASA Shared Services Center
Contacts2 people available
OfficeSTENNIS SPACE CENTER, MS, 39529, USA
Office AddressSTENNIS SPACE CENTER, MS, 39529, USA
Contacts

Full Description

Show more

See attached RFQ, SOW, and QandA
**Drawings are only available by request. Requestor must be able to receive encrypted e-mails and be capable of recieving/viewing CUI data.**

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

NAICS: 334519
New
Federal
Transient hot wire liquid thermal conductivity meter to support material compatibility and property testing for explosive materials.
Solicitation # 80NSSC27946410Q
NASA Shared Services Center is seeking a transient hot wire liquid thermal conductivity meter to support material compatibility and property testing for explosive materials, specifically to advance the understanding of low-toxicity monopropellants. The requirement is for a Thermtest THW-L1S unit capable of measuring thermal conductivity, thermal diffusivity, and volumetric specific heat of liquids and phase change materials. Technical specifications include a temperature range of at least -50C to 200C, ASCENT compatible wetted surfaces, the ability to measure samples across a range of viscosity, and integration capabilities for an external chiller or heater unit. Performance will take place at Lab 105E in Building 4205 at the Marshall Space Flight Center, with testing scheduled to begin in the winter of 2026. This procurement is being conducted under NAICS code 334519 as a commercial item acquisition following FAR Part 12. NASA intends to issue a sole source contract to Thermtest Inc, as they have been determined to be the sole provider of the required equipment. This notice is currently a request for capability statements rather than price quotes to determine if the procurement can be conducted on a competitive basis. Interested organizations must submit their qualifications to the identified points of contact by 8:00 a.m. CST on October 30, 2026. All submissions must reference the notice ID, and oral communications are not permitted.
Other Measuring and Controlling Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541512
New
Federal
Vision Technologies Installation Services KSC
Solicitation # 80NSSC26946930Q
The NASA Shared Services Center is seeking to award a sole source contract to Vision Technologies, LLC for the installation of cellular Distributed Antenna System (DAS) services at the NASA Kennedy Space Center, specifically for the K6 B2496 building. This procurement, categorized under NAICS code 541512, is intended as an 8(a) sole source acquisition under FAR 12.102(a) for commercial items and services. The scope of work involves providing materials, project management, and engineering services to establish LTE and NR cellular coverage. Vision Technologies will be responsible for designing the system to industry standards, procuring DAS materials, and installing head end and active equipment, while cabling and antenna installation will be handled by others. The contractor is required to configure, test, commission, and monitor the system to ensure proper operation with a live signal. Key deliverables include submittal drawings, antenna placement locations, testing methodology, and comprehensive close-out documentation consisting of as-built information, firmware revisions, equipment serial numbers, and warranty documentation. Final acceptance is contingent upon a verification test and validation survey once the system is operational. Interested organizations were requested to submit capability statements by October 30, 2026, to determine if the procurement should be conducted on a competitive basis.
Computer Systems Design Services

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334519
New
Federal
Yateks 3D video borescope system
Solicitation # 80NSSC27946179Q
Solicitation 80NSSC27946179Q is a firm-fixed-price contract opportunity issued by the NASA Shared Services Center for the procurement of a Yateks 3D video borescope system for the Goddard Space Flight Center. This is a brand-name requirement specifically for the Yateks Realta 3D system, which includes the iShot Imaging E Series Monitor Kit (PN: EM10418). The system was selected for its specialized capabilities, including motorized 360-degree articulation, forward-facing stereo 3D measurement, and full-HD imaging. The procurement is set aside for small businesses under NAICS code 334519, with delivery expected within one to two weeks after receipt of order. Shipping is FOB Destination to Greenbelt, Maryland. The award will be granted based on the lowest price technically acceptable (LPTA) criteria. To be eligible, responses must be submitted by authorized resellers only and must include a letter of authorization and proof of manufacturer pricing. Offerors must be registered in the System for Award Management (SAM) and include their CAGE code or Unique Entity ID on the proposal. All quotes are due by October 22, 2026, and must be submitted via email to Cody Guidry. The contract includes specific requirements for duty-free entry marking and strict compliance with U.S. export control laws, including ITAR and EAR regulations.
Other Measuring and Controlling Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

in about 9 hours
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS