Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

M30S/PMT-F7 Plain Weave Prepreg and MR60H/PMT-F7 Unidirectional Prepreg Tape.

Active

80NSSC26942084QFederal

Response Deadline08/27/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

NASA/NSSC is seeking capability statements for the procurement of M30S/PMT-F7 Plain Weave Prepreg and MR60H/PMT-F7 Unidirectional Prepreg Tape. This requirement is managed under solicitation number 80NSSC26942084Q with a performance location in Hampton, Virginia. Interested parties must submit their capability statements by the deadline of August 27, 2026. It is critical to note that this is a special notice requesting capability statements only; any quotes submitted in response to this notice will not be evaluated by the technical end user team. All correspondence must include the notice ID in the subject line to ensure visibility.

General Info

NASA seeks capability statements for prepreg materials by August 27, 2026, in Virginia.

Agency

National Aeronautics And Space AdministrationView Agency

NAICS

325211 - Plastics Material and Resin ManufacturingView NAICS

Place of Performance

Hampton, VA, 23681, USA

Set-Aside

NONE

Documents

(2)

Tab+07+Capability+Statement.pdf

PDF

Tab+04+SOW+Redacted.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PostedAug 25

special-notice

Response DeadlineAug 27

Submission deadline

Response Deadline

08/27/2026, 09:00:00 PM UTCin 1 day

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration

Contacts2 people available

OfficeUSA

Organization / Agency

National Aeronautics And Space Administration

View Agency Profile

Office AddressUSA

Contacts

Lindsey McLellan

contact@example.gov

Tiffany Neal

contact@example.gov

Full Description

Show more

NASA/NSSC has a requirement for M30S/PMT-F7 Plain Weave Prepreg and MR60H/PMT-F7 Unidirectional
Prepreg Tape. See the attached SOW and capability statement.

All correspondence must reference the notice ID in the subject line to ensure visibility.

NOTE: Quotes received in response to this notice will NOT be considered and will not be evaluated by
NASA’s Technical End User Team. We are currently only requesting Capability Statements.

Similar Contracts

Same NAICS industry code

Supply of Additive Manufacturing Filament (PETG)The Defense Logistics Agency under the Department of Defense is seeking a subcontractor for the supply and delivery of 2,000 units of IC3D-branded blue PETG filament for additive manufacturing. The selected provider must ensure all materials meet exact technical specifications, packaging standards, and shipping requirements, with performance taking place at Fort Carson, ZIP code 80913-0000. This procurement opportunity falls under NAICS code 325211 and was posted on August 25, 2026. Interested parties must submit their responses by the deadline of September 8, 2026.

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

Additive Manufacturing (3D Printing) Filament SupplyThe Defense Logistics Agency, under the Department of Defense, is seeking a subcontractor for the supply of 2,000 units of specialized polymer filament, identified by NSN 9330017128693. This material is intended for military additive manufacturing applications and must strictly comply with established defense standards. The contract falls under NAICS code 325211 and will be performed at Fort Carson, zip code 80913-0000. The solicitation was posted on August 25, 2026, with a response deadline set for September 8, 2026. Interested parties must submit their proposals by this date to be considered for the supply of these critical 3D printing materials.

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

FILAMENT, ADDITIVE M

Solicitation # SPE8E5-26-T-4065

This contract, identified as SPE8E5-26-T-4065, is a solicitation issued by the Defense Logistics Agency for the procurement of additive manufacturing filament. The specific item is identified by NSN 9330017133030 and part number PETG1752BLUE from IC3D, Inc. The order consists of two units with a required delivery date of August 19, 2026, and a delivery window of 20 days. The agreement specifies that delivery is FOB Origin, with inspection and acceptance occurring at the destination. Shipping is directed to the 0704 CS BN Brigade Support at Fort Carson, Colorado, using the fastest traceable means. The contractor must adhere to DLA packaging requirements, including MIL-STD-129 for marking and labeling, and comply with specific technical and quality requirements such as the removal of government identification from non-accepted supplies.

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

FILAMENT, ADDITIVE M

Solicitation # SPE8E5-26-T-4063

This contract, identified as SPE8E5-26-T-4063, is a solicitation by the Defense Logistics Agency for the procurement of two units of additive manufacturing filament, specifically part number PETG32BLUE from IC3D, Inc. The material is identified by NSN 9330017128693 and is designated for delivery to the 0704 CS BN Brigade Support at Fort Carson, Colorado. The required delivery date is August 19, 2026, with a delivery window of 20 days. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards such as RP001 and MIL-STD-129. Depending on the hazardous nature of the material, packaging must follow either TQ requirement IP025 or ASTM D3951. Shipping must be handled via the fastest traceable means, excluding parcel post, with the inspection and acceptance points both set at the destination.

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

FILAMENT, ADDITIVE M

Solicitation # SPE8E5-26-T-4064

This contract, identified as SPE8E5-26-T-4064, is an acquisition by the Defense Logistics Agency for additive manufacturing filament. The order specifies two units of part number PETG32GREENBRIGHT from IC3D, Inc., associated with NSN 9330017128788. Delivery is required within 20 days, with a required delivery date of August 19, 2026, shipping FOB Origin to the 0704 CS BN Brigade Support at Fort Carson, Colorado. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically referencing RP001 for packaging and RQ011 for the removal of government identification from non-accepted supplies. Packaging must comply with MIL-STD-129 and either IP025 for hazardous materials or ASTM D3951 for non-hazardous materials. Inspection and acceptance will take place at the destination.

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

Notice of Intent to Sole Source Nanoparticles

Solicitation # 98999

The Centers for Disease Control and Prevention, through the National Institute for Occupational Safety and Health, intends to award a sole source contract to Cina Consulting, LLC, also known as Lab 261. The contract is for the procurement of micro- and nanoplastic particle standards, specifically PVC and PET in 10 nm and 1 micron sizes with green fluorescent labeling, to be used in in vitro toxicology studies. This acquisition falls under NAICS code 325211 for Plastics Material and Resin Manufacturing and follows simplified procedures for commercial products. The agency has determined that Cina Consulting, LLC is the only source capable of providing this specific combination of polymer type, particle size, and fluorescence, which is essential for study continuity and consistency. While the government intends to issue a single solicitation to this vendor, interested parties may submit capabilities statements to Michael Davis via email by September 4, 2026. The final decision to conduct a competitive procurement remains at the discretion of the Contracting Officer.

CDC National Institute For Occupational Safety And Health

POSTED

DEADLINE

Recycled Plastic Product SupplyThe California Department of Fish and Wildlife is seeking a subcontractor for the supply of plastic products under the Recycled Plastic Product Supply contract. A critical requirement for this procurement is that all supplied plastic products must be manufactured using a minimum of 25% post-consumer resin. This opportunity is categorized under NAICS code 325211. The solicitation was posted on August 24, 2026, and the deadline for responses is September 7, 2026. Interested parties can find further details through the Cal eProcure portal.

California Department of Fish & Wildlife

POSTED

DEADLINE

Infection Control and PPE SupplyThe University Hospital of the West Indies, under the Government of Jamaica, is seeking a subcontractor for the supply of essential infection control personal protective equipment. The scope of the contract includes the procurement of N95 masks, face shields, goggles, and disinfectant wipes specifically designed for use in hospital settings. This opportunity was posted on August 24, 2026, and is categorized under NAICS code 325211. Interested parties can find further details and submission guidelines through the official Government of Jamaica electronic procurement portal.

University Hospital of the West Indies

POSTED

DEADLINE

Supply of Infection Control DisposablesThe University Hospital of the West Indies, under the Government of Jamaica, is seeking a subcontractor for the supply of infection control disposables. This contract focuses on the delivery of essential medical protective gear, specifically N95 masks, surgical masks, shoe covers, head covers, and isolation gowns. The procurement is categorized under NAICS code 325211 and was posted on August 24, 2026. Interested parties can find further details and application processes through the official government electronic procurement portal.

University Hospital of the West Indies

POSTED

DEADLINE

146138 RESIN, NUCLEAR GRADE

Solicitation # 231478

The Los Angeles Department of Water and Power has issued a solicitation for the procurement of nuclear grade resin under solicitation number 231478. This opportunity is categorized under NAICS code 325211 and is managed by the Water and Power agency in California. The performance of this contract is designated for Los Angeles, California, and interested parties must adhere to all submittal requirements outlined in the official bid documentation. Bids must be submitted electronically through the Electronic Request Solicit Procure system, as mail-in or hard copy submissions will not be accepted. The deadline for responses is August 31, 2026, at 9:00 PM UTC. For inquiries regarding this solicitation, Armando Aparicio is listed as the primary point of contact.

POSTED

DEADLINE

PLASTIC SHEET, PRESS

Solicitation # SPE8E5-26-T-4016

This solicitation, identified by number SPE8E5-26-T-4016, is for the procurement of plastic sheets for press applications, specifically part number TOOLTECCS53618 from Airtech International Inc. The contract calls for a quantity of 6 rolls, with each roll measuring 18 yards. The items are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Delivery is required within 167 days, with a specified need date of February 15, 2027. The terms specify delivery FOB origin, with inspection and acceptance occurring at the destination. The contract incorporates strict technical and quality requirements as outlined in the DLA Master List, and it includes provisions for covered defense information. Packaging must adhere to specific standards: hazardous materials must follow TQ requirement IP025, while non-hazardous materials must be commercially packaged according to ASTM D3951, provided it does not conflict with DLA master requirements. All packaging and labeling must comply with MIL-STD-129, and palletization must meet DLA procurement requirements. The solicitation is categorized under NAICS code 325211 and is managed by the Department of Defense.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E5-26-T-4018

This solicitation, identified by number SPE8E5-26-T-4018, is a request for the procurement of 11 sheets of plastic sheet under National Stock Number 9330-01-336-7096. The contract is issued by the Department of Defense through the DDSP New Cumberland Facility and is designated as a HUBZone Set-Aside, meaning it is reserved for businesses located in historically underutilized business zones. The procurement is subject to specific DLA packaging requirements and may involve covered defense information. Technical and quality requirements are governed by the DLA Master List, with the applicable revision determined by the type of acquisition and the specific date of solicitation or award. The performance of this contract is centered in New Cumberland, and the solicitation is categorized under NAICS code 325211 for miscellaneous chemical and plastic product manufacturing. Interested parties must adhere to strict guidelines regarding the removal of government identification from non-accepted supplies. The response deadline for this procurement is August 31, 2026, and the delivery schedule includes an allowance of 167 days after the delivery order. For technical inquiries or further information, the designated point of contact is Don Trachtman.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

More opportunities from National Aeronautics And Space Administration

Same awarding agency

Development of Additional Launch Capacity on South Wallops Island at Wallops Flight Facility

Solicitation # RFI-WFF-LaunchCapacity-2026

The National Aeronautics and Space Administration is conducting market research to identify potential interest in expanding launch infrastructure at the Wallops Flight Facility located on Wallops Island, Virginia. This initiative, managed as a subset of the Kennedy Space Center, focuses on the development of additional launch capacity on South Wallops Island. Interested parties should note that this is a special notice under solicitation number RFI-WFF-LaunchCapacity-2026. Responses are due by October 30, 2026. There are currently no set-aside restrictions for this opportunity, and primary coordination is handled by Philip Smith.

Real Estate and Rental and Leasing

POSTED

DEADLINE

Development of Additional Payload Processing Capability on North Wallops Island at Wallops Flight Facility

Solicitation # RFI-WFF-PayloadProcessing-2026

Real Estate and Rental and Leasing

POSTED

DEADLINE

Build Data Archiving and Technical ReportingThe Build Data Archiving and Technical Reporting subcontract, issued by the National Aeronautics and Space Administration, requires the comprehensive archiving and submission of all build records. This includes the documentation of process parameters, environmental controls, powder certifications, and real-time anomaly reports, all of which must strictly adhere to NASA data standards. The project is based in Cleveland, Ohio, under NAICS code 518210. Interested parties must respond by August 27, 2026, following the posting date of August 24, 2026.

Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

DEADLINE

Powder Handling, Traceability, and Certification ServicesThis subcontract with the National Aeronautics and Space Administration involves the management of GRX-810 powder, with a minimum quantity of 120 kg. The selected provider is responsible for maintaining strict environmental controls and ensuring full traceability of the material throughout the process. The scope of work requires the return of any excess powder in strict compliance with established NASA protocols. Performance of these services will take place in Cleveland, Ohio, under NAICS code 423830.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Process Parameter Development for ODS AlloysThis subcontract with the National Aeronautics and Space Administration focuses on the development and validation of L-PBF process parameters for specialty ODS nickel alloys. The scope of work involves a collaborative effort to perform iterative testing, detailed microstructural analysis, and mechanical validation to ensure the alloys meet specific performance standards. The project is categorized under NAICS code 541715 and will be performed in Cleveland, Ohio. Interested parties must adhere to the response deadline of August 27, 2026, following the posting date of August 24, 2026.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Laser Powder Bed Fusion (L-PBF) Printing Services on EOS M280 SystemNASA is seeking a subcontractor to provide Laser Powder Bed Fusion printing services utilizing an EOS M280 system. The primary objective is to conduct print trials, optimize parameters, and manufacture components using ODS nickel alloys, with a strict requirement to achieve a density of 99 percent or higher. The scope of work includes real-time anomaly reporting and the comprehensive archiving of all build records. These services will be performed in Cleveland, Ohio, under NAICS code 332999.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

1 month powder bed fusion development of oxide dispersion strengthened alloys

Solicitation # 80NSSC2694187Q

NASA/NSSC is seeking capability statements for a one-month development project involving powder bed fusion of oxide dispersion strengthened alloys. This requirement, identified by solicitation number 80NSSC2694187Q, is focused on technical development and is categorized under NAICS code 561990. The performance location for this effort is centered in Cleveland, Ohio. It is critical to note that this notice is strictly a request for capability statements; NASA will not consider or evaluate any formal quotes submitted in response to this specific announcement. Interested parties must include the notice ID in the subject line of all correspondence to ensure visibility. The deadline for submitting these capability statements is August 27, 2026, at 9:00 PM UTC.

All Other Support Services

POSTED

DEADLINE

TECHNOLOGY TRANSFER OPPORTUNITY: 3D Lidar for Autonomous Landing Site Selection (GSC-TOPS-353)

Solicitation # T2P-GSFC-00073

NASA's Technology Transfer Program is seeking companies interested in obtaining exclusive or nonexclusive license rights to commercialize the Ocellus 3D lidar system. Developed by the Goddard Space Flight Center, this lightweight, small-footprint technology enables autonomous planetary exploration vehicles to perform safe landing operations by providing high-resolution altimetry and terrain mapping. The system utilizes space-qualified components and MEMS-based mirrors to create 3D point clouds, functioning as an altimeter at altitudes around 2 km and producing detailed images and maps below 200 meters. While originally designed for the Dragonfly mission to Titan, the technology is applicable to lunar exploration, crewed aerial vehicles, in-space manufacturing, and terrestrial aerial navigation for defense or commercial sectors. Interested parties must submit a license application through the Automated Technology Licensing Application System. It is important to note that NASA provides no funding in conjunction with these licenses and no follow-on procurement is expected to result from responses to this notice.

Space Research and Technology

POSTED

DEADLINE

2026 Request for White Papers: NASA SBIR/STTR Phase II Sequential Awards

Solicitation # 80NSSC26R0014

NASA is conducting a portfolio evaluation through the 2026 Request for White Papers (Solicitation 80NSSC26R0014) to identify promising SBIR Phase II technologies for potential Sequential Phase II awards. These anticipated awards, valued between $2.5 million and $4 million, are intended to facilitate rapid post-Phase II development and technology infusion into key NASA programs. Amendment 1 has expanded eligibility to include STTR participants and firms with non-NASA prior Phase II awards. The primary objective is to map existing technologies to NASA mission priorities and provide a participatory method for small businesses to signal their readiness to support agency goals. While this call serves as a programmatic planning exercise and does not constitute a formal funding opportunity or guarantee of awards, NASA notionally anticipates reaching out to invited firms around January 2027. Interested respondents must submit a single white paper document, not exceeding 10 pages, along with a summary budget and briefing chart via the ProSAMS portal by the deadline of September 11, 2026. Submissions must include mandatory electronic forms such as Firm Certifications, Audit Information, and Disclosures of Foreign Affiliations. Evaluation will focus on Technology Readiness Level (TRL) advancement, risk reduction for NASA programs, flight demonstration readiness, and commercialization potential. The scope of work emphasizes the development of integrated systems, such as Orbital Maneuvering Vehicles for cislunar and deep space missions, requiring high performance in propulsion, communications, and radiation tolerance. NASA reserves the right to use the submitted information for any purpose and takes no financial responsibility for expenses incurred during the response process.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Flight Demonstration and Mission Operations PlanningThe National Aeronautics And Space Administration is seeking a subcontractor for the Flight Demonstration and Mission Operations Planning project. This effort focuses on the comprehensive planning and execution of flight demonstration missions, specifically encompassing trajectory design, ground station coordination, and overall mission operations. This opportunity is designated as a total Small Business Set Aside under NAICS code 541690. Interested parties must submit their responses by the deadline of September 11, 2026, following the posting date of August 12, 2026.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Thermal and Environmental Resilience TestingThe National Aeronautics And Space Administration is seeking a subcontractor for the Thermal and Environmental Resilience Testing project. This effort focuses on validating system resilience through comprehensive environmental testing, specifically including thermal vacuum cycling, radiation exposure, and lunar regolith interaction testing. This opportunity is designated as a total Small Business Set Aside under NAICS code 541380. The solicitation was posted on August 12, 2026, with a response deadline of September 11, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Modular Spacecraft Structural Design and FabricationThe National Aeronautics And Space Administration is seeking a subcontractor for the design and fabrication of lightweight, modular spacecraft structures. These structures must be compatible with ESPA-class launch adapters and engineered to withstand the rigorous loads associated with launch and the space environment. This opportunity is designated as a total Small Business Set Aside under NAICS code 332999. The solicitation was posted on August 12, 2026, with a response deadline of September 11, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE