Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

MACHINE, HOSE CRIMPI

Active
SPE7M4-26-T-267TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of one unit of a hose crimper machine with NSN 4720-01-565-1207 and part number FT1390-115 supplied by DANFOSS POWER SOLUTIONS II, LLC under solicitation SPE7M4-26-T-267T. Delivery is required within 185 days of contract award with FOB origin terms and no variance allowed in quantity. The item must be packaged per MIL-STD-2073-1E with packaging code U and marked in accordance with MIL-STD-129 without any special marking. All supplies must comply with DLA packaging requirements and be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract enforces strict prohibition against the intentional addition of mercury or mercury-containing compounds in any hardware supplied, except for specified exceptions like batteries, fluorescent lamps, instruments, weapon systems, or chemical reagents approved by NAVSEA; portable devices containing mercury must have shockproof construction and a secondary containment barrier. Inspection and acceptance occur at the destination, and transportation details follow DLAD procedural notes C19 and C20. The product is classified under NAICS code 326220 and is being acquired by the Department of Defense’s Fluid Handling Division. The original required delivery date was October 14, 2026, with a new ship date set for January 29, 2027. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. The primary point of contact for the contract is Blake Tushar, reachable via email and phone, and the full solicitation can be accessed through the DIBBS platform.

General Info

One hose crimper machine, NSN 4720-01-565-1207, due January 29, 2027, to New Cumberland, PA, no mercury, MIL-STD compliant.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

326220 - Rubber and Plastics Hoses and Belting ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M4-26-T-267T for DLA Land and Maritime Fluid Handling Division

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
Blake Tushar
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MACHINE,HOSE CRIMPI
MACHINE,HOSE CRIMPI
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
DANFOSS POWER SOLUTIONS II, LLC 01276 P/N FT1390-115
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017528050 0001 EA 1.000
NSN/MATERIAL:4720015651207
DELIVERY (IN DAYS):0185
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
SPE7M4-26-T-267T
SECTION B
PR: 7017528050 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:C
UNIT CONT:FO OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/29/2027 Original Required Delivery Date:10/14/2026
SPE7M4-26-T-267T NSN/Part Number: 4720-01-565-1207 Quantity: 1 EA Purchase Request: 7017528050QTY: 1 Delivery: 185 days ADO

Similar Contracts

NAICS: 326220
New
Federal
HOSE ASSEMBLY,NONMEThis contract governs the procurement of a hose assembly designated as SPECIAL EMPHASIS material for use in a critical shipboard system, where failure could result in catastrophic loss of life, vessel, or operational capability. The item, identified as Aeroquip drawing AE1010480-H-0210, must meet exacting requirements for material composition, testing, and traceability, with specific components made from SAE-AMS-QQ-S-763 Class 304, SAE AMS 6349, and SAE AMS-S-6758, subject to quantitative chemical and mechanical analysis. All parts require full traceability from raw material through fabrication, with each item bearing a unique traceability mark linked to certification data, and all testing—such as intergranular corrosion, proof pressure at 10,000 PSI, and non-destructive testing—must be documented with certified reports. Electronic signatures are accepted as legally equivalent to handwritten ones, and certifications must be unqualified and positively stated, with no disclaimers permitted. The contract mandates strict quality system compliance, requiring the contractor to maintain ISO-9001 with ISO-10012 or ANSI-Z540.3 and ISO-17025 calibration standards, or an acceptable alternative under MIL-I-45208 and MIL-STD-45662. Government Quality Assurance at source is required, with all subcontractors subject to equivalent controls and mandatory audits. Deliveries must be accompanied by certification documentation submitted via WAWF to Portsmouth Naval Shipyard under DODAAC N50286, with inspection and acceptance handled by N39040, and no material may be shipped without prior acceptance. The contract enforces a one-year warranty from delivery date, full Buy American compliance, and prohibits mercury or mercury-containing compounds. Final delivery is due within 365 days of contract effective date, and all weld procedures, filler metals, and fabrication methods must be pre-approved with submissions in electronic format. Configuration control, engineering change proposals, and waivers require formal Government approval, and all documentation must adhere to strict formatting, marking, and electronic submission protocols under the ECDS system.
Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 326220
New
DIBBS
HOSE, NONMETALLICThe contract is for 149 nonmetallic hoses identified by NSN 4720-01-570-2964 and part number 87486506, procured under solicitation SPE7M4-26-T-268J with a unit price of $149.00 per unit, resulting in a total contract value of $22,201. Deliveries are required FOB origin within 186 days from the contract award date, with no tolerance for variance in quantity. Inspection and acceptance both occur at the destination, and all items must be packaged in compliance with ASTM D3951 and marked and labeled according to MIL-STD-129, with all technical and quality requirements from the DLA Master List of Technical and Quality Requirements taking precedence. Packaging must adhere to DLA’s RP001 standards, and palletization must follow the same guidelines. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002. The original required delivery date was October 14, 2026, with a need ship date of January 30, 2027. The contract falls under NAICS code 326220 and is managed by the Department of Defense’s Fluid Handling Division. All packaging, labeling, and documentation must be in strict alignment with DLA’s standardized procedures, and transportation logistics are governed by DLAD Proc Notes C19 and C20.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 326220
New
DIBBS
HOSE, AIR DUCTThe contract is for the procurement of 12 units of HOSE, AIR DUCT with NSN 4720-01-553-5827 under solicitation SPE7M4-26-T-267Q, issued by the Department of Defense’s Fluid Handling Division. Delivery is required within 116 days of award, with the response deadline set for July 27, 2026. This is a restricted source item requiring formal engineering source approval from the Government Design Control Activity. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless a later amendment supersedes it. The offeror must comply with MIL-T-31000 by submitting all manufacturing drawings and specifications, detailed process and operation sheets identifying critical processes and inspection criteria, source information for forgings and castings, copy of purchase orders if available, and a shock extension report per MIL-S-901 and DI-ENVR-80706. If original equipment manufacturer drawings are unavailable, an engineering analysis must be provided detailing the development methodology, and if reverse engineering was employed, a complete procedure report including sampling methods, data collected, tolerance deviation justifications, and rationale for acceptance must be submitted to the engineering support activity. The place of performance is specified as New Cumberland, Pennsylvania, with Blake Tushar designated as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 326220
New
DIBBS
TUBING ASSEMBLY, NON
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONMEThe contract is for the procurement of six units of a non-metric hose assembly, part number AE3663161E0740, manufactured by Eaton Aeroquip LLC, under the NSN 4720-01-625-4116, with delivery required to Barstow, California, 257 days after order placement on March 31, 2027. The item is classified as a critical application and must fully comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with sampling conducted per MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified; unspecified attributes are treated as major with an AQL of 1.0. Quality assurance is governed by FAR 52.246-15 Certificate of Conformance procedures, and government inspection and acceptance occur at destination. Packaging must adhere to MIL-STD-2073-1E with a preservation method of AE and dry cleaning, a unit container of E5, and a packaging code of U; all packaging, packing, and marking materials must be free of mercury or mercury compounds. Marking shall follow MIL-STD-129 with no special marking required, and palletization must meet DLA packaging requirements. The unit of issue is each, with no quantity variance permitted. Payment and invoicing must be processed through Wide Area WorkFlow, and the contract specifies no FOB destination but indicates origin as the delivery point. The solicitation operates under a Lowest Price Technically Acceptable framework, with award dependent on meeting all technical and compliance thresholds at the lowest price. The contract incorporates multiple FAR and DFARS clauses, including safeguarding of contractor information systems, cybersecurity requirements under NIST SP 800-171, trafficking in persons, employment eligibility verification, sustainable products, and hazardous material safety data reporting, all subject to specific deviations. Offerors must disclose Unique Entity IDs and CAGE codes if supplying covered defense telecommunications equipment and must certify their small business status if applicable. The contract prohibits the use of mercury compounds, mandates compliance with U.S.-flag vessel requirements for ocean transport, and requires immediate reporting of cyber incidents and unauthorized disclosures. No formal Section C Statement of Work is provided, and technical specifications are embedded in referenced standards and clauses. The Contracting Officer is Rory O'Reilly, and proposals must be submitted electronically through D
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 4 days
View Details