Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

Machining Center & Engine Lathes

Forecast
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Phillips Corporation was awarded contract 47QSWC25P0032 on September 24, 2025, for the procurement and delivery of machining centers and engine lathes supporting the U.S. Air Force Life Cycle Material Command. This firm-fixed price agreement is valued at 4,845,673.53 dollars and is managed by the General Services Administration. The work is performed in Hanover, Maryland, under NAICS code 333517 for machine tool manufacturing. The period of performance runs from September 11, 2025, through September 14, 2026. This opportunity was competed under SAP as a full and open set-aside, with only one offer received. Based on federal award data, this contract is identified as a likely recompete opportunity with a medium confidence level of 65 percent.

General Info

Phillips Corporation will provide machining centers for USAF for $4,845,673.53 through 2026.

Agency

General Services Administration → Gsa/fas/gss/qscbd/assisted Contracting Branch B

NAICS

333517 - Machine Tool Manufacturing

Place of Performance

Hanover, MD, 210761576, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseForecast
Posted

pre-forecast

Prepare for this forecast

Research the agency, track this forecast, and prepare your capture plan before the solicitation opens.

Organization & Contact Information

Show more
AgencyGeneral Services Administration → Gsa/fas/gss/qscbd/assisted Contracting Branch B
Contacts1 person available
OfficeWashington, DC, 20006, USA
Organization / AgencyGeneral Services Administration → Gsa/fas/gss/qscbd/assisted Contracting Branch B
Office AddressWashington, DC, 20006, USA
Contacts
Antwoine Griggs
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
Predicted recompete opportunity based on federal award data.
Current Contract: 47QSWC25P0032 Incumbent: PHILLIPS CORPORATION Contract Value: $4,845,673.53 Potential End Date: 2026-09-14T00:00:00.000Z Competition: COMPETED UNDER SAP Pricing: FIRM FIXED PRICE Classification: recompete-likely (Confidence: medium - 65/100)
Subject: Award Notice - SAM.gov Posting 1. Contract Number: 47QSWC25P0032 2. Award Date: September 24, 2025 3. Award Type: Firm-Fixed Price (FFP) 4. Total Award Amount: $4,845,673.53 5. Contractor: Phillips Corporation 6. UEI: YFJ5M3N6EKY8 7. Place of Performance: Hanover, Maryland, 21076, United States 8. Description of Requirement: This contract provides for the procurement and delivery of machining centers and engine lathes for the U.S. Air Force Life Cycle Material Command AFLCMC). 9. NAICS Code: 333517 - Machine Tool Manufacturing 10. Contracting Office: General Services Administration (GSA), 819 Taylor Street, Fort Worth, Texas, 76102 11. Request For Quote (RFQ): 47QSWC25Q0109 12. Set-Aside Status: Full and Open 13. Number of Offers Received: 1 14. Period of Performance: September 11, 2025 - September 14, 2026 15. Contracting Officer Point of Contact: ANTWOING RIGGS Contracting Officer Email: contact@example.gov Phone: +1 (555) 000-0000

Similar Contracts

Same NAICS industry code

NAICS: 333517
New
Federal
WY AL Metel Lathe 16-18"
Bureau of Reclamation

POSTED

about 16 hours ago

DEADLINE

N/A
View Details
NAICS: 333517
New
DIBBS
Sleeve Bearing Component SupplierThis subcontract involves the manufacture or sourcing of 12 sleeve bearings, identified by NSN 3120010962475, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. All components must strictly adhere to the DLA Master List of Technical and Quality Requirements and comply with RP001 packaging and marking standards. Performance will take place in New Cumberland, Pennsylvania. To be eligible, the supplier must maintain CMMC Level 2 cybersecurity certification and ensure full hazardous material safety data compliance in accordance with FAR 52.223-3. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, under NAICS code 333517.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333517
New
SLED
Hydraulic Plate Shear
Solicitation # orlando-utilities-commission-PR9772-2027
The Orlando Utilities Commission is seeking quotations for the purchase of a new hydraulic plate shear to be used in the SEC machine shop. Interested parties must submit their bids in accordance with the provided specifications to ensure the equipment meets the technical requirements of the facility. The solicitation, identified as PR9772-2027, was posted on November 5, 2026, with a response deadline of November 20, 2026. Primary coordination for this procurement is handled by Jonathan McLester, with James Norris serving as the secondary point of contact.
Orlando Utilities Commission

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 333517
New
International
University of Alberta - Request for Proposal - Five (5) Axis Simultaneous Computer Numerical Control (CNC) Machining Centre
Solicitation # AB-2026-07371
The University of Alberta, on behalf of the Faculty of Science Department of Physics, is seeking proposals for the supply and installation of a Five Axis Simultaneous Computer Numerical Control CNC Machining Centre. This equipment will be utilized for the manufacturing of developmental prototypes and experimental research. The selected proponent will be responsible for the delivery, installation, and associated setup of the system. This solicitation, identified as AB-2026-07371, was posted on November 5, 2026, with a response deadline of November 30, 2026, at 8:00 PM. The project will be performed in Alberta, Canada. Interested parties may contact Senior Supply Consultant Satinder Atwal for further information regarding the submission process.
University of Alberta

POSTED

1 day ago

DEADLINE

in 23 days
View Details
NAICS: 333517
New
SLED
Universal Testing Machine (UTM)
Solicitation # 161295
The Virginia Department of Transportation is soliciting bids for the procurement, delivery, and installation of one new 50kN Benchtop Universal Testing Machine (UTM) and a new Long Travel Extensometer in Sandston, Virginia. The scope of work includes the provision of all necessary hardware, a software license for material data acquisition and real-time analysis, and a minimum of two days of onsite operational training for staff. The equipment must feature a digitally controlled AC servo drive system, a minimum load capacity of 50kN, and a crosshead adjusting speed of up to 20 IPM. The contract includes a comprehensive 12-month warranty covering all parts, labor, and software updates. The contract will be awarded on a grand total basis to the lowest responsive and responsible bidder, with a specific award priority given to DSBSD-certified micro or small businesses. Bidders must submit firm-fixed, all-inclusive pricing via the eVA portal, incorporating all freight and shipping on an FOB Destination basis. Compliance with the Virginia Prompt Payment Act ensures payment within 30 days of invoice verification. Key administrative requirements include mandatory eVA registration, adherence to the E-Verify program, and compliance with various state and federal anti-discrimination and accessibility laws. Final acceptance is contingent upon the contractor demonstrating that the equipment is fully operational and correcting any deficiencies at their own expense.
Virginia Department of Transportation

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 333517
New
Federal
Large CNC EDM Sinker Machine SupplyThis subcontract, managed by the Department of Defense under the FA9101 Aedc Pkp Procrmnt Branch, requires the supply of a new, fully functional Large CNC EDM Sinker Machine for prime contractors supporting Air Force Arnold Engineering Development Complex projects. The machine must feature a moving column design that integrates direct drive ball screws, linear motion guide ways, and specialized EDM circuitry specifically designed for exotic materials. The equipment must be manufactured to NFPA 79 standards and maintain a precision accuracy of +/- .0001 inches. The final delivery must include one complete machine along with all necessary lifting and leveling hardware. The project is categorized under NAICS code 333517 and will be performed in zip code 37389.
FA9101 Aedc Pkp Procrmnt Branch

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 333517
New
Federal
Large CNC EDM Sinker
Solicitation # FA9101_LARGE_CNC_EDM_SINKER
The Department of Defense, through the Arnold Engineering Development Complex (AEDC) at Arnold Air Force Base, Tennessee, has issued a Sources Sought Notice to identify capable small and large businesses for the procurement of a new, fully functional Large CNC EDM Sinker. This requirement strictly prohibits the use of refurbished or remanufactured parts. The selected contractor must provide all materials, labor, and equipment to deliver the machine FOB Arnold Air Force Base, with a required delivery timeline of four months from the receipt of order. The scope includes installation at the Model Shop in Building 451, supervised by factory-trained servicemen, and the provision of two days of formal training for three individuals on machine controls and operation. Technical specifications require the machine to be built to NFPA 79 standards and compatible with a 480V, 3PH, 60 HZ power system. Post-delivery, the contractor must perform functional accuracy tests according to ISO/ANSI standards, ensuring repeatability and positioning within +/- .0001”. The contract includes a 24-month warranty on materials and workmanship, a ten-year accuracy guarantee on the Linear Drive System, and strict support requirements, including a 36-hour on-site repair response time and 48-hour delivery for repair parts. Interested respondents must submit company information, SAM data, a capabilities statement, a rough-order-of-magnitude budgetary estimate, and a projected delivery schedule by November 13, 2026.
FA9101 Aedc Pkp Procrmnt Branch

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 333517
New
International
T_ARTC_01_FY26 - Sourcing Event
Solicitation # Doc2465714864
Contract T/ARTC/01/FY26, issued by A*STAR Research Entities, involves the procurement for the supply, delivery, installation, and commissioning of one 5-axis CNC Simultaneous Machining Centre designed for milling and laser deposition. The project will be performed in Singapore and is currently categorized as a sources-sought event. The solicitation, identified by number Doc2465714864, was posted on November 5, 2026. Interested parties must submit their responses by the deadline of December 1, 2026, at 15:59. Primary coordination for this event is managed through the designated point of contact at A*STAR.
A*STAR Research Entities

POSTED

2 days ago

DEADLINE

in 24 days
View Details
NAICS: 333517
New
International
Composite Cutting Saw SupplyThis subcontract involves the supply of a high-precision composite cutting saw for prime contractors working on National Research Council Canada research projects. The required equipment must be capable of cutting ceramic substrates, composite honeycomb, and both thermoset and thermoplastic carbon fibre with a precision accuracy of up to 25 microns. Key technical specifications include support for wet and dry cutting, a variable speed cutting wheel, and both automatic and manual feed options. The project is managed under the Government of Canada through the National Research Council of Canada and falls under NAICS code 333517. The successful provider is responsible for delivering a fully operational saw that adheres to all NRC safety standards by the completion deadline of March 31, 2027. Performance of the contract will take place within Canada.
National Research Council of Canada

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 333517
New
International
Composite Cutting Saw
Solicitation # 26-58215
The National Research Council of Canada is seeking to acquire a new composite cutting saw under solicitation 26-58215 to replace an existing in-house unit that no longer meets operational and safety standards. This equipment will be used to cut novel composite materials into coupons for metrology and mechanical testing, reducing reliance on third-party services. The procurement is being conducted as an Advance Contract Award Notice, with the government intending to award the contract to UKAM Industrial Superhard Tools unless another supplier can demonstrate equivalent capabilities. The required saw must support the cutting of glass, ceramic substrates, composite honeycomb, and both thermoplastic and thermoset carbon fibre. Technical specifications include a minimum cutting capacity of 600mm x 550mm, cutting accuracy up to 25 microns, and a maximum floor footprint of 1200mm W x 2000mm L x 1500mm H. The unit must feature wet and dry cutting capabilities, automatic and manual feed options, a variable speed cutting wheel, and adjustable blade height, operating on 120 to 220 volts. The equipment is expected to be delivered by March 31, 2027, or May 31, 2027, depending on the specific contractual provision. Interested suppliers must submit a statement of capabilities to Adebisi Adeyeye by November 20, 2026.
National Research Council of Canada

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 333517
New
SLED
CNC Turning Center SupplierThis subcontract agreement outlines the requirements for a supplier to provide two CNC Turning Centers for prime contractors working on Davis Technical College projects in Utah. The contract specifically calls for Haas ST-10Y Turning Centers with live tooling, though approved equivalents may be submitted provided they are accompanied by full technical specifications, documentation, and professional references. The selected supplier is responsible for delivering the equipment F.O.B. Destination and ensuring all machinery complies with state labeling and safety data sheet requirements. Interested parties must submit their responses by November 18, 2026, under NAICS code 333517.
Utah

POSTED

3 days ago

DEADLINE

in 11 days
View Details
NAICS: 333517
New
SLED
CNC Turning Center with Live Tooling
Solicitation # TK27101926
Davis Technical College is soliciting bids for two Haas ST-10Y Turning Centers with live tooling to expand the capacity of its CNC programming and manufacturing program. While the Haas model is the requested standard, bidders may propose alternative equipment that meets or exceeds these specifications. To be considered, alternative bids must include full specifications, documentation, and three professional references, and must clearly detail how the proposed equipment differs from the specified model. The college retains sole discretion in determining if an alternative meets its needs and reserves the right to reject any offer. The contract is subject to State of Utah and Davis Technical College standard purchase order terms. Deliveries must be made F.O.B. Destination, freight prepaid, on business days between 8:00 a.m. and 4:00 p.m., typically within five working days of the order. Payment terms are Net 30 days following delivery or receipt of a correct invoice, which must include the purchase order number, quantity, description, and unit cost. Contractors must certify they are not debarred from government transactions and must participate in the E-verify system for employees in Utah. Additionally, the contractor must comply with various non-discrimination laws and provide material safety data sheets for any hazardous materials delivered.
Utah

POSTED

3 days ago

DEADLINE

in 11 days
View Details

More opportunities from General Services Administration → Gsa/fas/gss/qscbd/assisted Contracting Branch B

Same awarding agency

NAICS: 511210
Federal
Provision of Operator and Service Manuals (Digital and Print)The contract involves the provision of a comprehensive technical documentation package, which includes user manuals, service guides, safety instructions, and software operation guides. These materials are to be delivered in both digital and printed formats, ensuring accessibility and ease of use for the end users. The scope reflects a focus on thorough documentation to support operators and service personnel effectively. This subcontract, titled "Provision of Operator and Service Manuals (Digital and Print)," is managed by the General Services Administration under its Assisted Contracting Branch B. The place of performance is specified as Norfolk, with a zip code of 23511. Classified under the NAICS code 511210, the contract emphasizes publishing-related services, indicating the preparation and distribution of technical documents. No information is provided about solicitation numbers or set-aside types, and the available data lacks specific contact details.
Software Publishers

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 811212
Federal
Post-Warranty Service and Preventive Maintenance SupportThis contract, titled "Post-Warranty Service and Preventive Maintenance Support," involves providing ongoing preventive maintenance, repair, technical support, and supply of spare parts following the expiration of the initial 12-month warranty period. It is a subcontract under the General Services Administration, specifically the GSA/FAS/GSS/QSCBD/Assisted Contracting Branch B, focused on services classified under NAICS code 811212, which relates to automotive repair and maintenance. The location for performance of the contract is Norfolk, with the zip code 23511, indicating that the services will be delivered in that area. While some details such as solicitation number, agency type of set aside, and point of contact are not specified, the contract ensures the continuity of equipment functionality and support beyond the initial warranty through preventive and corrective services, ensuring operational reliability and minimizing downtime for the client.
Computer and Office Machine Repair and Maintenance

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 811212
Federal
On-Site Installation, Calibration, and Operator Training for EPIC 6100 SystemThe contract involves the physical installation, calibration, functional testing, and operator training for clinical staff of the EPIC 6100 System at a government site located in Norfolk, with the zip code 23511. It is a subcontract awarded by the General Services Administration's Assisted Contracting Branch B, under NAICS code 811212, which corresponds to electronic equipment repair and maintenance services. The scope focuses on ensuring that the system is properly installed and calibrated, thoroughly tested for functionality, and that clinical operators receive appropriate training to effectively use the equipment. This contract was posted on May 4, 2026, and does not specify a solicitation number or a set-aside designation. It is part of support efforts to facilitate government operations by equipping clinical staff with the necessary tools and knowledge for the EPIC 6100 System, emphasizing on-site service delivery. The contract ensures that all critical aspects, from installation to user proficiency, are covered to maintain the operational readiness of the equipment within the healthcare environment.
Computer and Office Machine Repair and Maintenance

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 339115
Federal
Supply of EPIC 6100 Refraction System with SSC-CG ModuleThis contract involves the procurement and delivery of one EPIC 6100 Refraction System equipped with the SSC-CG module. It includes the provision of operator and service manuals to ensure proper use and maintenance. Additionally, the contract guarantees a 12-month warranty period, underscoring the commitment to product reliability and support. The contract falls under the jurisdiction of the General Services Administration's Assisted Contracting Branch B, identified as a subcontract under NAICS code 339115. The product is to be delivered to Norfolk, with the postal code 23511. Although specific solicitation details and contact information are not provided, the contract is listed publicly, offering transparency and access to relevant procurement information.
Ophthalmic Goods Manufacturing

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 336112
Federal
Vehicle Recompete: Fss GS07F0558YFederal Supply Schedule contract GS07F0558Y is a full-recompete vehicle managed by the General Services Administration under the Multiple Award Schedule Contracting Division. The contract carries an IDV ceiling of 26,106,393 dollars and is not subject to any specific set-aside restrictions. The current ordering period is scheduled to conclude on September 14, 2027. The contract primarily supports the procurement of specialized ground support equipment, with significant task orders issued to TLD Wollard LLC. Key equipment provided includes aircraft baggage loaders, diesel tugs, and aircraft tow tractors. The procurement falls under NAICS code 336112, focusing on the supply of heavy-duty vehicle equipment for aviation operations.
Light Truck and Utility Vehicle Manufacturing

POSTED

8 months ago

DEADLINE

N/A
View Details
NAICS: 333415
Federal
Vehicle Recompete: Fss 47QSWA22D0099This Federal Supply Schedule contract, identified as 47QSWA22D0099, is a full-recompete vehicle managed by the General Services Administration under the Multiple Award Schedule Contracting Division. The contract has an IDV ceiling of 500,000 dollars and does not utilize any specific set-aside designations. The current ordering period is scheduled to conclude on September 7, 2027. The contract falls under NAICS code 333415 and was initiated through solicitation 47QSMD20R0001. While there are currently no active task orders valued at this time, the vehicle has been associated with the Enhanced Environmental Control Unit EECU BPA involving Mainstream Engineering Corp.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

8 months ago

DEADLINE

N/A
View Details
NAICS: 238160
Federal
Vehicle Recompete: Fss GS07F0509YThis Federal Supply Schedule contract, identified as GS07F0509Y, is a full-recompete vehicle managed by the General Services Administration under the Multiple Award Schedule Contracting Division. The contract features an IDV ceiling of 101,593,481 dollars and is not subject to any specific set-aside restrictions. The ordering period for this vehicle is scheduled to conclude on August 8, 2027. The scope of work primarily focuses on roofing services, as evidenced by task orders for roofing repair and replacement at JBLM and for GSA Region 8 PBS, both awarded to Pacific Tech Construction Inc. The contract falls under NAICS code 238160 and was originally solicited under number 7FCI-F8-030056-B.
Roofing Contractors

POSTED

9 months ago

DEADLINE

N/A
View Details

Prepare for this forecast

Research this forecast and prepare for the solicitation

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS