Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

MAGNET WIRE

Active
SPE7M1-26-T-148RFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of magnet wire, identified by NSN 6145-00-937-8581 and part number SPE7M1-26-T-148R, under a federal solicitation issued by the Department of Defense through the Maritime Supply Chain. The wire must be supplied in reels, with each reel weighing exactly 75 pounds and containing a single continuous length of material, as dictated by the Advice Code provisions, which override any conflicting schedule requirements. All materials must comply with the latest revision of NEMA MW1000 dated January 1, 2025, and conform to MIL-DTL-12000 for preservation and packaging, as well as MIL-STD-2073-1E and MIL-STD-129 for marking and packaging standards. Mercury or mercury-containing compounds are strictly prohibited in or on the wire unless explicitly exempted for functional uses such as batteries, instruments, sensors, or chemical reagents specified by NAVSEA, and any portable devices containing mercury must meet shock-proof and double-containment requirements per NAVSEA 5100-003D. The contract mandates full and open competition with zero variance on quantity, requiring delivery of five reels within 87 days FOB origin to the designated receiving facility in Tracy, California. Inspection and acceptance occur at the destination, and the unit of issue is the reel (RL). Packaging must use preservation methods designated as ZZ and meet specified containment and labeling standards. The solicitation was posted on July 20, 2026, with a response deadline of July 23, 2026, and the original delivery date is set for December 18, 2026, with a need ship date of September 25, 2026. Technical and quality requirements are incorporated from the DLA Master List, and configuration change management, deviation requests, and government identification removal procedures are governed by referenced RQ codes. Transport and shipping directives follow DLA Procurement Notes C19 and C20.

General Info

Procure five 75-pound reels of magnet wire per NSN 6145-00-937-8581, compliant with NEMA MW1000 and MIL standards, delivered FOB origin to Tracy, CA by December 18, 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

331318 - Other Aluminum Rolling, Drawing, and ExtrudingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M1-26-T-148R Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Alisha Blanton
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MAGNET WIRE
WIRE, ELECTRICAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
1 RL = 75 LB
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
UNIT OF ISSUE RL (REEL) CONTAINS 75 POUNDS.
ONE CONTINUOUS LENGTH
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
FULL AND OPEN COMPETITION APPLIES.
If Advice code is 2N, 28, or 34, this requirement is to provide material in continuous length. Multiple unit packs are unacceptable. Only continuous length will meet the requirement. If Advice code is 2P or 39, this requirement is to provide material in continuous length. Multiple unit packs are acceptable. Advice code (ADV) is located after the "For Government Use Only" heading under the Shipping Information. If there are inconsistencies between the schedule and Advice code, the Advice code takes precedence. **************************************************
IAW BASIC NON GOVT STD NEMA MW1000 REVISION NR DTD 01/01/2025 PART PIECE NUMBER:
SPE7M1-26-T-148R
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017045818 0001 RL 5.000
NSN/MATERIAL:6145009378581
DELIVERY (IN DAYS):0087
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:O
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:XXX
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
UNIT OF ISSUE RL (REEL), CONTAINS 75 POUNDS. PRESERVATION AND PACKAGING SHALL BE IAW THE LATEST REVISION OF MILITARY SPECIFICATION: MIL-DTL-12000, FOR CABLE, CORD AND WIRE.
..
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
SPE7M1-26-T-148R
SECTION B
PR: 7017045818 PRLI: 0001 CONT’D
US
Need Ship Date:09/25/2026 Original Required Delivery Date:12/18/2026
SPE7M1-26-T-148R NSN/Part Number: 6145-00-937-8581 Quantity: 5 RL Purchase Request: 7017045818QTY: 5 Delivery: 87 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331318
New
DIBBS
BAR, METALThe contract specifies the procurement of aluminum alloy 7075 metal bars with a nominal diameter of 1.500 inches and a required length between 10 and 12 feet in whole-foot increments, weighing approximately 2.138 pounds per linear foot, with a stress-relieved T7351 temper condition. The material must comply with SAE AMS4124G, ASTM B666/B666M-20, and ASTM B660-23 standards, and is subject to strict certification requirements including a Certificate of Quality Compliance (Mill-Material Certification) that must accompany each shipment and be forwarded to the DLA Troop Support Contracting Officer. Every unit must be permanently marked with the DLA delivery order number, NSN, specification revision, alloy and temper designation, manufacturer’s name, heat and lot number, and dimensions using stamping or stenciling methods that are legible, waterproof, and non-contaminating; adhesive labels are permitted for smaller diameter bars and tags for wire. Packaging must adhere to MIL-STD-2073-1E and ASTM B660 Level A requirements, with marking conforming to MIL-STD-129 and additional unit-of-issue labeling when applicable. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to receive award under this solicitation, and any quote based on products from non-approved distributors constitutes an exception and risks rejection or criminal penalties for unauthorized substitution. Quality conformance inspections and other related requirements are waived for QSLD-compliant suppliers, except for Foreign Military Sales cases. The contract is firm fixed price with no variance allowed in quantity, and delivery is mandated within 60 days after order award. Inspection and acceptance occur at the destination, with shipment to DLA Distribution Cherry Point in North Carolina. The material is designated under NSN 9530-00-413-5080, with procurement triggered by purchase request 7017422619 and a required ship date of October 29, 2026. All documentation, including technical data packages and quality requirements, references the DLA Master List of Technical and Quality Requirements, and any deviation from specifications or supplier eligibility is grounds for rejection.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 24 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICALThe contract specifies the procurement of 17,000 feet of electrical wire with NSN 6145-00-948-9483, requiring delivery within 155 days to DLA Distribution Cherry Point in North Carolina under FOB origin terms. The wire must comply with SAE AS22759/11A and AS22759E standards, and is subject to the Qualified Products List or Qualified Manufacturers List due to its critical application status. Packaging must adhere to MIL-STD-2073-1E and MIL-DTL-12000 for preservation, with marking in accordance with MIL-STD-129 and palletization as required by DLA packaging guidelines. The wire must be supplied in continuous length, with packaging requirements dictated by the applicable advice code—2N, 28, or 34 mandate continuous spools without multiple unit packs, while 2P or 39 allow multiple packs if continuous length is maintained. A five percent quantity variance is permitted, inspection and acceptance occur at destination, and preservation methods must follow specified ZZ codes. Delivery is scheduled for December 23, 2026, with an original required date of December 16, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on solicitation or award date depending on acquisition size. All documentation must reference the authorized DoD unit of issue, and deviations or waivers require formal engineering change proposals. The solicitation number is SPE7M1-26-T-190Q, with points of contact and technical specifications governed under DLA’s eProcurement system.
MARITIME SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

in 2 days
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICALThis contract specifies the procurement of electrical wire under solicitation SPE7M1-26-T-204P, with a total quantity of 51,500 feet divided into three line items of 2,000 feet, 13,000 feet, and 36,500 feet respectively, all under the same NSN 6145001077913. The wire must conform to SAE AS81044/12 Revision A dated December 1, 2011, and comply with military specifications MIL-DTL-12000 for preservation and packaging. All materials must be furnished in continuous length as dictated by the advice code, with strict adherence to packaging standards MIL-STD-2073-1E and marking requirements MIL-STD-129. Mercury or mercury-containing compounds are strictly prohibited in the wire, its preservation, packaging, and marking, except for specific functional uses such as batteries or instruments approved by NAVSEA, which must include secondary containment. The material must originate from qualified manufacturers listed on the Qualified Products List or Qualified Manufacturers List, and full and open competition applies. Delivery is FOB origin with a 5% quantity variance allowance, inspection and acceptance occur at destination, and the required delivery window is 69 days. Packaging must be palletized according to DLA requirements and free of mercury-based substances. Shipments are directed to three DLA distribution depots in Oklahoma, California, and Pennsylvania with specific shipping deadlines extending to July 2028, though the original delivery target remains December 1, 2026. Contractual compliance also requires adherence to all applicable DLA master technical and quality requirements referenced via their official webpage, and deviations or waivers must be formally requested through established engineering change procedures.
MARITIME SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

in 2 days
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICALThe contract specifies the procurement of electrical wire with a National Stock Number 6145-01-071-0106, totaling 1,000 feet in continuous length, to be delivered within five days FOB origin. The wire must comply with technical specifications MIL-DTL-81381/10F and MIL-DTL-81381C(1) Sup 1, and be wound on minimum 9.5-inch diameter spools as required by the Qualified Products List or Qualified Manufacturers List, since the NSN is designated as a primary QPL/QML item. Packaging and preservation must adhere to MIL-STD-2073-1E and MIL-DTL-12000, with marking conforming to MIL-STD-129, and the advice code 2L indicates the material must be supplied in continuous length. The contract allows a quantity variance of plus 10 percent and zero percent reduction, with inspection and acceptance occurring at origin. Preservation, packaging, and unit packing methods are detailed with code ZZZ, and special marking requirements are designated as ZZ-ZZ. The delivery destination is the 7th Tactical Fighter Wing in Taitung, Taiwan, with a required delivery date of April 11, 2025, and the solicitation issued under SPE7M2-26-T-5692 has a response deadline of July 31, 2026. Full and open competition applies, and the Department of Defense enforces all applicable DLA master technical and quality requirements referenced by R or I numbers, with revisions controlled by the solicitation or amendment date. The point of contact is Cynthia Korteweg, with the procurement managed under the Nuclear Reactor Program within the Department of Defense.
NUCLEAR REACTOR PROGRAM

POSTED

about 24 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331318
New
DIBBS
CABLE, RADIO FREQUENThe contract solicitation SPE7M0-26-T-012G seeks the procurement of 30 feet of radio frequency cable, specifically the Times Microwave Systems, Inc. part number LMR-400-LLSB, identified by NSN 6145-01-474-8796, with a potential quantity increase up to 33 feet under a plus 10 percent, minus 0 percent variance. The item must be delivered in continuous length, as dictated by Advice Code 2N, and shipped to FPO AP 96349 and Yokosuka, Japan, with delivery required within five days of the delivery order issuance and no later than July 21, 2026. Delivery is FOB destination, with inspection and acceptance occurring at the delivery point. The cable must be packaged in accordance with MIL-STD-2073-1E and MIL-DTL-12000, preserved and packed using specified methods identified as ZZ for preservation material, wrap, and cushioning, with units contained in 500-foot reels and packed in accordance with DLA’s RP001 packaging requirements. Marking must strictly comply with MIL-STD-129, including GS1-128 barcodes and Data Matrix symbols, and must include the NSN, contract number, and shipping addresses. Special marking code ZZ indicates contractor-defined requirements, and hazardous materials must be labeled per 29 CFR 1910.1200. The contract references DLA’s Master List of Technical and Quality Requirements, where R and I numbers define binding specifications. Payment will be processed through WAWF, and the contractor must provide a Unique Entity ID and comply with all applicable socioeconomic representations, including small business status if applicable. The contract includes a full suite of FAR and DFARS clauses addressing equal opportunity, trafficking in persons, employment eligibility, sustainable products, cybersecurity safeguarding, defective pricing, subcontracts, inspection, and prohibitions on hexavalent chromium and covered telecommunications equipment. No contract type is yet specified but will be inserted by the contracting officer. Technical and quality compliance is monitored through destination inspections per FAR 52.246-2, and all submissions must be made electronically via DIBBS by the July 30, 2026 deadline.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 331318
New
DIBBS
CABLE, SPECIAL PURPOSE,This contract specifies the procurement of a special-purpose electrical cable identified by NSN 6145012371290 and part number M24640/24-03UO, conforming to MIL-DTL-24640/24E and MIL-DTL-24640C Sup 1, with a required length of 500 feet per reel. The cable must be manufactured in compliance with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Strict prohibitions against intentional introduction of mercury or mercury-containing compounds apply throughout the supply chain except for specific exceptions such as functional uses in batteries, fluorescent lamps, sensors, weapon systems, and chemically specified reagents approved by NAVSEA; any such exempted items must include a second containment boundary and be shockproof per NAVSEA 5100-003D. The product must originate from a qualified manufacturer listed on the Qualified Products List or Qualified Manufacturers List, and packaging must adhere strictly to MIL-STD-129 and RP001, with unit packs configured per the contract’s QUP of 500 feet. The advice code dictates packaging format: continuous length only if code is 2N, 28, or 34; multiple unit packs permitted only if code is 2P or 39, with advice code overriding any conflicting schedule data. Delivery is FOB origin with a 277-day lead time, acceptable quantity variance of plus or minus five percent, and inspection and acceptance occurring at destination. The contract requires delivery no later than May 4, 2027, with the original required delivery date set for October 14, 2026. All shipments must be addressed to the DLA Distribution facility at New Cumberland, Pennsylvania, in accordance with DLAD Proc Note C19 for transportation and C20 for first destination, and labeled per the contract’s specification.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 331318
New
DIBBS
STRAINER, SEDIMENTThe contract pertains to the procurement of one sediment strainer with NSN 4730-01-239-3765 and part number 055802, supplied by Crane Pumps & Systems PFT Corp, under solicitation SPE7M0-26-T-011M. The item must be delivered within five days to the Southwest Regional Maintenance Center-AIM in San Diego, California, with delivery terms FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the destination. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the product, except for specific exempted uses such as functional components in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents, with portable mercury-containing devices required to have shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply fully with MIL-STD-2073-1E and MIL-B-117 standards for bag fabrication, with marking adhering to MIL-STD-129 and palletization under DLA’s packaging requirements. The item must be shipped via the fastest traceable means, explicitly excluding parcel post, and shipped to a designated hazmat delivery location. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The solicitation is a Total Small Business Set-Aside under NAICS code 331318, with an original required delivery date of July 16, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 331318
New
DIBBS
REEL ASSEMBLY, STATIC DThe contract pertains to the procurement of one Reel Assembly, Static Discharge, identified by NSN 4930-01-597-1220 and part number MGR75-20 from Hannay Reels Inc, with a delivery requirement of ten days from the contract date. The item must be packaged and labeled in strict accordance with MIL-STD-129 and ASTM D3951, with all DLA Master List of Technical and Quality Requirements taking precedence over any ASTM standards. Packaging must comply with RP001: DLA Packaging Requirements for Procurement, and palletization must adhere to specified DLA guidelines. The unit of issue is one ea with no variance permitted in quantity. Delivery is FOB origin, with inspection and acceptance occurring at the destination. The specified shipping and delivery address is located in Kaiserslautern, Germany, under the SSA CLII III IV VII IX, Building 2371, with shipment and transportation governed by DLAD Proc Note C19 and C20. The contract is issued under solicitation SPE8EE-26-T-2120 with an original required delivery date of July 15, 2026, and the item is to be marked for the specified government entity. All documentation must reflect the prescribed government identifiers and codes, including DI code A01 and freight control Z9.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 331318
New
Federal
47--STRAINER,SEDIMENTThe contract seeks a single unit of NSN 4730012393765, a sediment strainer, to be delivered to the Southwest Regional Maintenance Center - AIM within five days of award. The procurement is conducted through a request for quotation with electronic submissions only; hard copies are not available, and no specifications, plans, or drawings are provided. The only approved source is 96046 055802, but all responsible parties may submit quotes if received by the deadline. This is a total small business set-aside under the SBA program, limited to small businesses as defined by NAICS code 331318. The solicitation, numbered SPE7M026T011M, was posted on July 19, 2026, with responses due by July 30, 2026. It is managed by the Department of Defense through DLA Land and Maritime, based in Columbus, Ohio. Questions must be directed via email to the designated point of contact, with further details accessible through the SAM.gov portal using the provided link.
DLA Land And Maritime

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 331318
New
DIBBS
BAR, METALThis procurement contract specifies the supply of a metal bar made from aluminum alloy 7050 in temper T3511, with a cross section of 4.500 inches and a length requirement of exactly 10, 11, or 12 feet in whole increments, totaling three feet as ordered. All materials must comply with technical standards including SAE AMS4341H, ASTM B666/B666M-20, and ASTM B660-23, and are subject to stringent identification and marking requirements: each unit must be clearly labeled with the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer details including heat and lot number, and dimensions using only stamping or stenciling methods that ensure legibility, durability, and non-contamination. Adhesive labels are required for bars, tubes, and shapes under 0.250 inches in nominal outside diameter, while tags are acceptable for wire. A Certificate of Quality Compliance, or mill certification, must accompany every shipment to both the end customer and the DLA Troop Support Contracting Officer. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award; any deviation from this requirement must be explicitly declared and results in non-compliance that may lead to rejection or criminal penalties. Although source inspection requirements are waived for QSL-compliant suppliers, full adherence to the QSL program is mandatory unless otherwise authorized in writing by the government. Packaging must follow MIL-STD-2073-1E and DLA packaging requirements, with marking in accordance with MIL-STD-129 and palletization per RP001. The item is to be shipped FOB origin, with delivery due within 60 days after award, to RAF Brize Norton in the UK, under a firm fixed price with zero tolerance for quantity variance. Inspection and acceptance occur at destination, and the contract is governed by the technical data package revision B, with all applicable quality and certification standards tied to effective dates referenced in official DLA master lists.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICALThe contract solicits 893 feet of electrical wire, identified by NSN 6145-01-349-9876 and part number M16878/16BJE9, to be delivered in one continuous 500-foot spool per unit under the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105. The wire must conform to MIL-DTL-16878/16D and MIL-DTL-16878H(3) SUP 1A specifications, with all technical and quality requirements drawn from the DLA Master List of Technical and Quality Requirements. Delivery is required within 163 days after order, with a firm need ship date of December 28, 2026, and original delivery deadline of February 26, 2027. Shipping is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with packaging and marking strictly governed by MIL-STD-2073-1E and MIL-STD-129, and preservation following MIL-DTL-12000. The wire must not contain mercury or mercury-containing compounds except in approved exceptions such as functional batteries, fluorescent lights, sensors, weapon systems, or NAVSEA-specified reagents; portable fluorescent lamps and instruments containing mercury must include a secondary containment. The use of class I ozone-depleting substances is prohibited unless approved in writing by the Contracting Officer, and the prohibition extends to all processes involved in manufacturing and testing. Additive manufacturing is strictly prohibited for this item, and offers including such components are ineligible for award. The contractor must submit a Safety Data Sheet prior to award or face rejection. The product must comply with Buy American and Berry Amendment requirements, with the Berry Amendment threshold at $150,000. The contractor must also register with DLA’s AMPS system to access the Vendor Shipment Module and must comply with all DFARS clauses including safeguarding covered defense information, cyber incident reporting, prohibitions on hexavalent chromium and covered telecommunications equipment, and restrictions on mandatory arbitration agreements. Destination inspection is mandatory under FAR 52.246-2, and acceptance occurs at the delivery point. Payment must be submitted electronically via Wide Area Workflow with both an invoice and receiving report. All representations and certifications must be current in the System for Award Management, including small business status, HUBZone certification for price
NUCLEAR REACTOR PROGRAM

POSTED

4 days ago

DEADLINE

in 1 day
View Details
NAICS: 331318
New
DIBBS
PARTS KIT, REEL ASSEThe contract pertains to a parts kit for a reel assembly, specifically designated with NSN 4930-01-524-6930, with a quantity of one unit required under purchase request 7017400121. Delivery must be completed within five days of award. The solicitation, identified as SPE8EE-26-T-2032, was posted on July 17, 2026, with a response deadline of July 22, 2026. It falls under NAICS code 331318 and is issued by the Department of Defense through the Construction & Equipment Manu & Con organization. The place of performance is specified as Fort Stewart, Georgia, with a zip code of 31314-5185. The primary point of contact is Philip Ferrara, reachable via email and phone provided. This procurement is subject to DLA packaging requirements and integrates technical and quality specifications referenced through R or I numbers from the DLA Master List of Technical and Quality Requirements, accessible via the DLA website. The applicable revision of the master list is determined by the solicitation issue date for simplified acquisitions, unless amended, in which case the amendment date governs. Additionally, government identification must be removed from any non-accepted supplies as per the RQ011 requirement.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

4 days ago

DEADLINE

in 1 day
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 334511
New
DIBBS
Small Business Subcontracting & Accelerated PaymentsSmall businesses are invited to subcontract under a Department of Defense opportunity managed by the Maritime Supply Chain, with accelerated payment terms available under FAR 52.232-40 to improve cash flow and financial agility. The contract is categorized under NAICS code 334511 and requires seamless integration into the prime contractor’s WAWF invoicing and compliance systems to ensure efficient financial processing and regulatory alignment. Subcontractors must be prepared to meet all system requirements for electronic submission and documentation to qualify for accelerated payments. The solicitation is open with a narrow response window, closing just three days after posting, and no set-aside designation is specified, meaning eligibility is based on the ability to perform under the stated terms rather than size or status-based preferences. Interested parties should act swiftly and ensure full technical and administrative readiness to interface with the prime’s automated systems.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 2 days
View Details
NAICS: 483111
New
DIBBS
Ocean Freight & U.S.-Flag Vessel TransportationThe contract requires the provision of ocean freight services using U.S.-flag vessels in full compliance with the Jones Act, ensuring that all transportation of supplies adheres to federal regulations governing maritime commerce. When U.S.-flag vessels are unavailable to meet required schedules or capacity needs, the contractor must prepare and submit waiver requests to secure authorization for alternative vessel arrangements. This subcontract is tied to the Department of Defense’s Maritime Supply Chain and is classified under NAICS code 483111, which pertains to deep sea, coastal, and Great Lakes water transportation. The opportunity was posted on July 20, 2026, with a strict response deadline of July 23, 2026, indicating a rapid procurement timeline. Performance of the contract may occur across unspecified locations, as no specific place of performance is designated, but the focus is clearly on ensuring reliable and compliant maritime logistics support for defense-related supply needs.
Deep Sea Freight Transportation

POSTED

about 24 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & LabelingThe contract requires the identification, documentation, and proper labeling of hazardous materials in strict accordance with OSHA’s Hazard Communication Standard and Department of Defense regulations. Contractors must ensure all hazardous substances are accurately cataloged, clearly labeled with required hazard warnings, and accompanied by comprehensive safety data documentation to meet federal compliance standards. Work must be performed to support the Maritime Supply Chain under the Department of Defense, with a focus on maintaining operational safety and regulatory alignment across all handling and storage environments. The solicitation is structured as a subcontract with a narrow response window, closing just three days after posting on July 23, 2026, indicating an urgent need for qualified providers. The North American Industry Classification System code 541620 points to specialized environmental and scientific consulting services, emphasizing the technical expertise required for accurate hazardous material management. Performance is expected to support DoD logistics infrastructure, though specific geographic location details are not provided, suggesting the work may span multiple sites under the Maritime Supply Chain’s jurisdiction.
Environmental Consulting Services

POSTED

about 24 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity & Covered Defense Information SafeguardingThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 controls to safeguard covered defense information and ensure compliance with DFARS cyber incident reporting requirements. It is structured as a subcontract under the Department of Defense, specifically managed by the Maritime Supply Chain agency, and falls under NAICS code 541512 for computer systems design services. The primary focus is on establishing a robust cybersecurity framework that aligns with federal standards to protect sensitive defense data and respond promptly to any cyber incidents as mandated by regulation. The solicitation is open for a very limited window, with responses due by July 23, 2026, and posted on July 20, 2026, indicating a tight turnaround for interested parties. The place of performance and point of contact details are not specified, suggesting flexibility in execution locations, but the requirement to adhere to NIST and DFARS standards is absolute. Compliance with these controls is not optional; failure to implement or maintain them could result in contract breach, loss of eligibility, or reporting obligations. Contractors must demonstrate proven experience in securing controlled unclassified information and maintaining continuous compliance throughout the contract lifecycle.
Computer Systems Design Services

POSTED

about 24 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334511
New
DIBBS
Electromechanical Toggle Switch SupplyThe contract calls for the supply of a Defense Department-compliant electromechanical toggle switch identified by NSN 5930005221425, requiring strict adherence to all military specifications for inspection, packaging, and hazardous material handling. The product must meet rigorous DoD standards to ensure reliability, safety, and compatibility with existing military systems, with no deviations permitted in manufacturing, testing, or documentation. All units must be fully traceable and prepared for immediate deployment in operational environments governed by federal defense protocols. The solicitation is posted as a subcontract under NAICS code 334511 and is managed by the Department of Defense through the Maritime Supply Chain organization. Interested parties must respond by July 23, 2026, at 5:00 PM, with no flexibility in deadline adherence. The contracting activity is conducted entirely through the DIBBS platform, and bidders are expected to comply with all procurement guidelines tied to federal subcontracting under defense contracts. While specific delivery locations and point of contact details are not provided, performance is expected to align with overarching DoD logistics and supply chain requirements.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541330
New
DIBBS
Technical Documentation and Reverse Engineering SupportThe contract seeks the development of comprehensive technical data packages for defense-related systems, including manufacturing drawings, process sheets, and shock test reports compliant with MIL-S-901 and DI-ENVR-80706 standards. The scope includes potential reverse engineering analysis to support documentation and manufacturing readiness, ensuring accurate reproduction or modification of existing components. All deliverables must meet stringent military specifications and be tailored for production use within defense supply chains. This is a small business set-aside subcontract under NAICS code 541330, administered by the Department of Defense through its Maritime Supply Chain division. The opportunity was posted on July 20, 2026, with a response deadline of July 23, 2026, indicating a rapidly timed procurement cycle. The work is expected to support critical defense infrastructure, requiring precise technical execution and adherence to government standards, though the specific place of performance and point of contact are not provided in the available data.
Engineering Services

POSTED

about 24 hours ago

DEADLINE

in 2 days
View Details
NAICS: 488999
New
DIBBS
Hazardous and Radioactive Material Handling & TransportationThe contract is for the safe handling, labeling, and transportation of hazardous and radioactive materials, requiring strict adherence to Department of Transportation, Occupational Safety and Health Administration, and military standards. It includes responsibilities for FOB coordination and thorough vetting of carriers to ensure compliance and operational integrity throughout the supply chain. All activities must meet or exceed regulatory requirements for security, documentation, and employee safety, particularly when transporting sensitive or dangerous goods within defense-related operations. This is a total small business set-aside subcontract under the NAICS code 488999, issued by the Maritime Supply Chain division of the Department of Defense. The solicitation was posted on July 20, 2026, with a response deadline of July 23, 2026, indicating a compressed timeline for qualified small businesses to submit proposals. Performance location details are unspecified, suggesting flexibility based on operational needs, but all work must align with federal, military, and industry-specific protocols for hazardous material management. Participation is limited to small business concerns as defined under SBA regulations.
All Other Support Activities for Transportation

POSTED

about 24 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332996
New
DIBBS
Supply of Filter Elements for Engine Fuel Pumps (NSN: 4330004718599)The contract is a total small business set-aside under the SBA program for the supply of filter elements with NSN 4330004718599, which must comply with military specifications for use in engine fuel pumps. Delivery is structured under future delivery orders to be issued by the Department of Defense through the Maritime Supply Chain, with shipments made FOB origin meaning the buyer assumes responsibility once goods leave the supplier’s facility. The item is classified under NAICS code 332996, indicating it involves other fabricated metal product manufacturing, and the solicitation is exclusively reserved for small businesses as defined by the Small Business Administration. The deadline to respond is set for July 23, 2026, with the solicitation posted on July 20, 2026, through the DIBBS platform, indicating the procurement is being managed under a subcontracting framework to support defense logistics requirements.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 2 days
View Details
NAICS: 322220
New
DIBBS
Packaging and Preservation of Sensitive/Military-Grade MaterialsThis contract requires the packaging and preservation of sensitive and military-grade materials in full compliance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring secure, standardized handling for defense applications. All items, particularly mercury-containing devices, must be enclosed in shockproof packaging to prevent damage during transport and storage, and must be properly marked with accurate barcoding systems as mandated by federal military specifications. The work must be performed by a small business as this is a Total Small Business Set-Aside under SBA guidelines, with the NAICS code 322220 indicating the primary industrial classification applies to paperboard container manufacturing. The solicitation is closed to responses after July 23, 2026, and the award will be managed under the Maritime Supply Chain division of the Department of Defense, with performance expected to support defense logistics requirements across unspecified locations.
Paper Bag and Coated and Treated Paper Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract entails the preparation, submission, and ongoing management of Safety Data Sheets for hazardous materials in full alignment with OSHA’s 29 CFR 1910.1200 regulations, ensuring all documentation meets federal safety and compliance standards. This includes continuous monitoring and implementation of regulatory updates, with responsibilities extending to the accurate flow-down of updated SDS requirements to all subcontractors involved in the supply chain. The work is structured to maintain consistent compliance across all tiers of operations, emphasizing timely communication and documentation integrity. This is a small business set-aside subcontract under NAICS code 541620, issued by the Department of Defense through the Maritime Supply Chain office, with a competitive bid window closing on July 23, 2026. The solicitation is open exclusively to certified small businesses, reflecting a federal commitment to fostering small business participation in critical safety compliance services. All activities are expected to be performed in support of defense-related logistics, requiring rigorous adherence to federal hazardous materials handling standards and proactive responsiveness to evolving regulatory requirements.
Environmental Consulting Services

POSTED

about 24 hours ago

DEADLINE

in 2 days
View Details
NAICS: 483111
New
DIBBS
Transportation and Delivery Coordination via Sea FreightThe contract requires coordination of sea freight transportation to deliver valve seats to the USNS MT WHITNEY at FPO AE 09517-3310, with strict adherence to DLA procedures and a mandatory 5-day FOB destination delivery timeline. All logistics must be structured to meet military supply chain standards, ensuring timely and compliant movement of goods under the Department of Defense’s maritime supply chain oversight. The performance location is specified as a floating military postal address, indicating delivery to a vessel at sea or in a designated naval port, necessitating precise coordination with naval logistics teams. This is a subcontract under NAICS code 483111, which pertains to coastal and Great Lakes water transportation, and was posted on July 20, 2026, with responses due by July 31, 2026. The contracting activity falls under the Agency Name MARITIME SUPPLY CHAIN and the Department of Defense, requiring bidders to align with federal defense logistics protocols. The absence of solicitation number or point of contact suggests reliance on the DIBBS portal for detailed submission guidance and documentation, and all operations must be executed within the stringent timelines and regulatory framework governing military maritime deliveries.
Deep Sea Freight Transportation

POSTED

about 24 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541380
New
DIBBS
Packaging, Labeling, and Hazard Communication ComplianceThe contract requires the provision of compliant packaging, labeling, and hazard communication documentation specifically for valve seats, ensuring full adherence to regulatory standards. This includes the preparation and delivery of Safety Data Sheets (SDS) and OSHA-compliant hazard labels that accurately convey chemical and physical risks associated with the product. The documentation must meet all federal requirements for workplace safety and transport regulations, with emphasis on clarity, accuracy, and alignment with current OSHA and GHS guidelines. This is a subcontract under the Department of Defense’s Maritime Supply Chain, with performance required at FPO, 09517-3310. The solicitation, identified by the NAICS code 541380 for other scientific and technical consulting services, was posted on July 20, 2026, and responses are due by July 31, 2026. All submitted materials must be thoroughly vetted for compliance before delivery, and failure to meet labeling or documentation standards could result in rejection or contract non-fulfillment. The work scope is strictly focused on hazard communication and packaging compliance, with no mention of manufacturing or supply of the valve seats themselves.
Testing Laboratories and Services

POSTED

about 24 hours ago

DEADLINE

in 10 days
View Details