Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Magnetic Particle Inspection (MPI) Services for NSN 6850015717370

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Magnetic particle inspection services are required for parts identified by NSN 6850015717370, encompassing all necessary steps including surface preparation, inspection using magnetic particle techniques, detailed documentation, and formal reporting in strict alignment with established nondestructive testing standards. The work must be performed to ensure the detection of surface and near-surface discontinuities, with all procedures and results fully compliant with federally recognized NDT protocols. This subcontract under the Department of Defense, managed by the Defense Logistics Agency, is classified under NAICS code 541380 and is intended to support critical defense supply chain integrity. The contract is linked to a specific award referenced through DIBBS, with performance requirements focused solely on the designated part number without specified geographic limitations provided.

General Info

Magnetic particle inspection for NSN 6850015717370 per DoD NDT standards, managed by DLA under NAICS 541380.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A726FA9V2.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

MAGNETIC INSPECTION

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedAug 5

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform magnetic particle inspection on parts identified by NSN/Part Number 6850015717370, including surface preparation, inspection, documentation, and reporting in compliance with NDT standards.

Similar Contracts

Same NAICS industry code

Product Verification Testing and Source Inspection for Critical LightingThis subcontract involves providing product verification testing and source inspection services for critical lighting items under the DLA Weapons Support Nuclear Reactor Program. The selected contractor will be responsible for conducting inspections and tests using sampling methods per MIL-STD-1916 or ASQ H1331, while ensuring that identification markings comply with MIL-STD-130N. Specialized equipment capable of verifying MIL-DTL-16377/8C and MIL-DTL-16377K SUP 1 is required to complete these tasks, with the final deliverables consisting of detailed inspection reports and test results. The project is categorized under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties must respond by November 9, 2026, to support the Department of Defense in maintaining the quality and compliance of critical components for nuclear reactor program projects.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 5 hours ago

DEADLINE

First Article Testing and Validation ServicesThis subcontract, titled First Article Testing and Validation Services, is a total small business set-aside issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division. The project involves performing First Article Testing for prime contractors to ensure that initial production units meet strict close tolerance requirements and Navy-mandated safety specifications. Work is performed in San Diego and utilizes CMM and precision gauges to validate components before they are delivered for government approval. The selected contractor is responsible for providing comprehensive documentation and test results, culminating in the delivery of a First Article Test Report and an approved test unit. This effort falls under NAICS code 541380 and is critical for validating the quality and safety of supply contracts managed by DLA Weapons Support.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Aerospace Quality Compliance & Certification ServicesThe Aerospace Quality Compliance and Certification Services subcontract involves providing technical verification and quality documentation audits for prime contractors supporting DLA Weapons Support ASC projects. The primary scope of work includes validating technical data against the DLA Master List of Technical and Quality Requirements and verifying Critical Application Item certifications specifically for ITT Aerospace part number 57802M. The selected provider must possess specialized expertise in AS9100 standards and DLA R and I quality codes to deliver comprehensive quality certification reports and compliance documentation packages. This Department of Defense requirement is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located in Tracy, California. The project falls under NAICS code 541380. Interested parties should note the response deadline of November 6, 2026, for this specialized aerospace quality assurance engagement.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

First Article Test (FAT) Validation and Certification

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

First Article Testing (FAT) and Production Lot Testing (PLT)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Production Lot Testing (PLT) for Adapter Assemblies

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Production Lot Testing (PLT) and Validation ServicesThis subcontract, titled Production Lot Testing (PLT) and Validation Services, involves performing quality conformance validation for regulator kits on US Navy aviation projects. The selected contractor will be responsible for selecting and preparing PLT samples from production lots and managing the traceable shipping of these materials to NAWC Patuxent River for evaluation. All activities must strictly adhere to the specific PLT protocols mandated by NAWC Patuxent River, culminating in the delivery of validated samples and comprehensive test reports. Managed by the DLA Weapons Support Fluid Handling Division under the Department of Defense, the work is categorized under NAICS code 541380. The place of performance is located in Jacksonville, Florida. Interested parties should note the response deadline of November 9, 2026, for this specialized technical support requirement.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

First Article and Production Lot Testing for Annular BearingsThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves specialized testing for annular bearings to support prime contractors on DLA supply contracts. The scope of work includes conducting First Article Testing to validate manufacturing processes and Production Lot Testing to ensure ongoing batch consistency. To verify critical dimensions and material properties, the contractor must utilize specialized equipment such as CMM, hardness testers, and load/stress rigs. A mandatory requirement for this engagement is ISO/IEC 17025 accreditation. The selected contractor is responsible for delivering detailed First Article and Production Lot Test Reports. The performance of these services is centered in the 78419-5255 zip code area, with the solicitation falling under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Production Lot Test (PLT) ServicesThis subcontract for Production Lot Test services supports prime contractors on Defense Logistics Agency hardware contracts under the DLA Weapons Support Nuclear Reactor Program. The scope of work involves conducting sampling and testing of flat washers using specialized laboratory equipment to ensure all physical and material properties align with DLA/ESA standards. The selected provider is responsible for delivering a certified test report for one production lot, which will be used for evaluation by the Engineering Support Activity. Performance for this contract will take place in Corpus Christi, Texas, under NAICS code 541380.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 5 hours ago

DEADLINE

Production Lot Testing Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Non-Destructive Testing (NDT) ServicesThis subcontract opportunity, managed by the Department of Homeland Security under agency CG-SEA-C22, seeks a qualified provider to perform Non-Destructive Testing services for the USCGC KUKUI (WLB 203). The scope of work involves conducting critical hull and structural integrity inspections for prime contractors, utilizing ultrasonic testing, Magnetic Particle Inspection, and radiographic testing to detect thinning or cracks. The selected provider must deliver detailed NDT inspection reports and formal structural integrity certifications. The contract is designated as a total Small Business Set Aside under NAICS code 541380. A key requirement for this engagement is that all personnel performing the work must be ASNT certified Non-Destructive Test Inspectors. Interested parties should note the response deadline of November 23, 2026.

POSTED

about 10 hours ago

DEADLINE

Non-Destructive Testing (NDT) & Specialized InspectionThis small business set-aside subcontract, issued by the Department of Defense under agency W6QK Acc-Rsa, involves providing non-destructive testing and specialized inspections for UH-60 landing gear components. The contractor is responsible for identifying catastrophic or unrepairable damage for prime contractors on Department of the Army projects, utilizing advanced metrology and critical test equipment in accordance with WP 0058. The scope of work requires strict adherence to AR 70-62 and DMWR 1-1620-247 standards to ensure safety and compliance. Key deliverables include the provision of detailed inspection reports and comprehensive damage assessments. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 30, 2026.

POSTED

about 10 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Lead-Acid Sealed Gel Electrolyte Storage Battery SupplyThis subcontract through the Defense Logistics Agency involves the supply of one lead-acid, sealed, gel electrolyte storage battery, identified by NSN 6140-01-310-7173. The contractor is responsible for ensuring the item is marked according to MIL-STD-129 and packaged in compliance with MIL-STD-2073-1E and RP001 standards. Delivery of the completed battery is required FOB Destination. The opportunity falls under NAICS code 335910 and is associated with the Department of Defense. The place of performance is located in North Little Rock, Arkansas. Interested parties must note the response deadline of November 9, 2026, following the posting date of October 29, 2026.

Battery Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Labels (NSN 7690-01-417-9227)This subcontract through the Defense Logistics Agency involves the manufacture or procurement of specialized labels under NSN 7690-01-417-9227 for prime contractors on Department of Defense supply contracts. The contractor is responsible for ensuring all labels meet specific technical requirements, including the application of Special Marking Code 32 for shelf life management. All items must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The contract falls under NAICS code 323111 and requires delivery via traceable shipping within 30 days after receipt of order. Performance will take place in the 28310 zip code area. Interested parties must respond by the deadline of November 5, 2026.

Commercial Printing (except Screen and Books)

POSTED

about 5 hours ago

DEADLINE

Supply of Plastic Press StripsThis subcontract involves the manufacture or sourcing of 1,000 plastic press strips under NSN 9330-01-679-0943 for prime contractors supporting Defense Logistics Agency Troop Support contracts. The selected provider must hold a small business certification and ensure all items are produced in strict accordance with the DLA Master List of Technical and Quality Requirements. Performance will take place in Hattiesburg, Mississippi, with a final delivery deadline of March 30, 2026. The procurement falls under NAICS code 333310 and is managed through the Department of Defense.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Labels (NSN 7690-01-417-9227)This subcontract involves the manufacture or sourcing of specialized labels under NSN 7690-01-417-9227 to support prime contractors for the Defense Logistics Agency. The selected provider must ensure all products adhere to strict military standards, specifically performing packaging according to MIL-STD-2073-1E and RP001, and executing marking requirements per MIL-STD-129 and Special Marking Code 32. The scope of work requires the delivery of 2,000 rolls of labels to the bulk break point located at Fort Bragg, North Carolina. All deliverables must be completed and delivered within 30 days after the order is placed. This requirement falls under NAICS code 323111 and is managed through the Department of Defense.

Commercial Printing (except Screen and Books)

POSTED

about 5 hours ago

DEADLINE

Supply of Flashbreaker Tape #1This subcontract involves the supply of 10 rolls of Flashbreaker Tape #1, identified by NSN 8040LLNC19218 and Airtech International Inc Part Number FLASHBREAKER 1, to support prime contractors delivering for the Defense Logistics Agency. The materials must be delivered FOB Destination to Cherry Point, zip code 28533-0021. The contract requires strict adherence to ASTM D3951 and MIL-STD-129 standards for packaging and marking. Additionally, the provider must ensure full compliance with the Buy American Act and DFARS cybersecurity regulations. The solicitation was posted on October 29, 2026, with a response deadline of November 6, 2026, under NAICS code 339113.

Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of NSN 4820013550268This subcontract involves the procurement of one unit of NSN 4820013550268 to support prime contractors under the Defense Logistics Agency. The selected provider is responsible for sourcing the specific part and ensuring all items are packaged according to ASTM D3951 standards. Additionally, all packaging must be marked and labeled in strict accordance with MIL-STD-129 and the DLA Master List of Technical and Quality Requirements. The contract is categorized under NAICS code 423830 and requires delivery of the unit FOB Destination to a performance location in FPO 96673. Interested parties must submit their responses by the deadline of November 9, 2026, for this Department of Defense requirement.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

Supply of Ultraviolet (UV) Disinfectant Lights

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

Soldering Flux Supplier

All Other Basic Organic Chemical Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Identification Markers (NSN 7690-01-668-5478)This subcontract involves the manufacture or sourcing of specialized identification markers, specifically NSN 7690-01-668-5478, for prime contractors working with the Defense Logistics Agency. The scope of work requires the delivery of three units that strictly adhere to military standards, including marking per MIL-STD-129, packaging per MIL-STD-2073-1E, and palletization according to RP001 DLA Packaging Requirements. The project falls under NAICS code 339999 and is managed by the Department of Defense. Interested parties must note the response deadline of November 5, 2026, with performance taking place in zip code 09523.

All Other Miscellaneous Manufacturing

POSTED

about 5 hours ago

DEADLINE

Storage Battery Supplier (P/N GPL-4CT)This subcontract, managed by the Defense Logistics Agency for the Department of Defense, involves the procurement and delivery of one storage battery, part number GPL-4CT, manufactured by Concorde Battery Corporation. The equipment must match NSN 6140-01-584-0411 and adhere to Type I (Code K) specifications, which include a non-extendable shelf life of 18 months. The supplier is required to ensure full compliance with the Buy American Act as outlined in DFARS 252.225-7001. This requirement falls under NAICS code 335910, with a response deadline set for November 9, 2026.

Battery Manufacturing

POSTED

about 5 hours ago

DEADLINE

Wire Fabric Supplier

Industrial Mold Manufacturing

POSTED

about 5 hours ago

DEADLINE

Polyurethane Coating Material SupplierThis subcontract with the Defense Logistics Agency involves the supply of black two-component polyurethane coating touch-up pens, specifically NSN 8010015603448, for prime contractors. The requirement consists of one box of 24 pens delivered FOB Destination to Travis AFB. The supplier must adhere to strict packaging and marking standards including RP001, IP025, MIL-STD-2073-1E, and MIL-STD-129, while performing quality sampling according to MIL-STD-1916 or ASQ H1331. Additionally, the contractor is required to comply with DFARS 252.225-7001 Buy American standards.

Paint and Coating Manufacturing

POSTED

about 5 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Radioactive Materials Notification and Compliance

ASC SUPPLIER OPER OEM DIVISION

POSTED

CLOSED

Hazardous Materials Marking and Labeling

ASC COMMODITIES DIVISION

POSTED

CLOSED

Quality Conformance & First Article Testing (FAT) Services

ASC COMMODITIES DIVISION

POSTED

CLOSED

Military Packaging and Marking Services

Defense Logistics Agency

POSTED

DEADLINE

Material Inspection and Receiving Report (MIRR) Preparation

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling Services

ASC COMMODITIES DIVISION

POSTED

CLOSED

First Article Testing (FAT) and Quality Assurance Services

Defense Logistics Agency

POSTED

DEADLINE

Marking, Labeling, and IUID Compliance Services

Defense Logistics Agency

POSTED

DEADLINE

Radioactive Materials Notification & Tracking

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

CLOSED

Hazardous Materials Labeling and Documentation

POSTED

CLOSED

Product Verification Testing (PVT) and Inspection Services

Defense Logistics Agency

POSTED

DEADLINE

Quality Assurance and Inspection Services

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS