This Solicitation opportunity from Department Of Defense was posted on July 1, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

MAIN VALVE ASSY (SOLE SOURCE)

Closed

SPMYM226Q7588Federal

Submission Closed07/06/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332919

New

SLED

Butterfly Valves & Fittings

Solicitation # 8936

The City of Waterbury is seeking sealed bids for the procurement of butterfly valves and fittings under bid number 8936. This invitation to bid is currently open, with a clarification deadline set for September 18, 2026, at 2:00 PM. All bids must be submitted to the office of the Director of Purchasing at City Hall, 235 Grand Street, Waterbury, CT 06702, by the deadline of 11:30 AM on September 29, 2026. Bids will be publicly opened and read aloud at that time, and no submissions will be accepted after the specified cutoff. For further inquiries, the primary point of contact is mmccauley@waterburyct.org.

POSTED

DEADLINE

47--REPAIR KIT,PIPE,EME

Solicitation # SPE7M3-26-T-9062

This contract is for the procurement of 128 emergency damage control pipe repair kits, identified by NSN 4730-01-414-6976 and part number BV-USA-2. The order is a total small business set-aside issued by the Department of Defense Fluid Handling Division, with a required delivery date of September 17, 2026, and a delivery window of 57 days after order. Shipping is FOB origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. Suppliers must adhere to strict packaging and marking standards, including MIL-STD-2073-1 and MIL-STD-129. Because the materials are classified as hazardous, contractors are required to submit Safety Data Sheets and Hazardous Communication Standard labels for approval prior to the award. Additionally, the supplier must ensure employees are trained on the current OSHA hazard communication requirements and comply with DLA packaging requirements for procurement.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # N0010426QFF42

This solicitation is for the procurement of a Straight Tailpiece (piece 73), designated as Special Emphasis material due to its critical role in shipboard systems where failure could result in serious injury or loss of the vessel. The contract requires the use of ASTM-B369 UNS C96400 material and mandates rigorous quality controls, including hydrostatic testing, dye penetrant inspection, and radiography. All internal threads must be cut rather than cold-formed, and the contractor must adhere to strict DPAS DO-rated priority and Buy American standards. The delivery process involves a phased schedule including the submission of Radiographic Shooting Sketches and Production Radiography for approval prior to final delivery, which must occur within 365 days of the contract effective date. Documentation and certifications must be submitted via Wide Area Workflow (WAWF) to Portsmouth Naval Shipyard. The contract emphasizes strict configuration control, requiring formal Engineering Change Proposals for any modifications and a comprehensive certificate of compliance for all delivered items.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # SPE7M8-26-T-6631

This contract, solicitation number SPE7M8-26-T-6631, is issued by the Department of Defense Electrical Devices Division for the procurement of 46 pressure switches, identified by NSN 5930-01-410-9221 and Detroit Switch Inc part number 222-10NB16-2223676. The items are designated as critical application items and must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The required delivery date is January 11, 2027, with a delivery window of 75 days after receipt of order. The agreement mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E for preparation and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List, and the contract includes specific prohibitions against the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. Configuration change management and engineering change proposals are required for any variances, and the contract specifies that government identification must be removed from any non-accepted supplies.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Solicitation # N0010426QFD90

This firm fixed price solicitation is for the refurbishment of a control valve, designated as Special Emphasis SUBSAFE/Non-Level I material due to its critical role in shipboard systems. The contract requires the prime contractor to be the original equipment manufacturer and mandates that all work be performed according to specific NAVSEA approved procedures and technical data packages. Key requirements include strict adherence to quality systems such as ISO-9001, the application of unique serial numbers for traceability, and the submission of comprehensive certificates of compliance and test reports for non-destructive and hydrostatic testing. The agreement emphasizes rigorous quality assurance, requiring government source inspection and the approval of all welding and brazing procedures prior to execution. It establishes a strict configuration control process where any waivers, deviations, or engineering change proposals must be reviewed and approved by the contracting officer. All certification data and final documentation must be submitted via Wide Area Workflow for review and acceptance by the Portsmouth Naval Shipyard before any material is shipped.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

FPAIC AUGMENTATION PARTS

Solicitation # FA527026QA058

POSTED

DEADLINE

VACUUM BREAKER ASSY — 4820015535794 — SPRMM126QGF68

Solicitation # SPRMM126QGF68

This solicitation, issued by DLA Mechanicsburg, seeks the manufacture and supply of a Vacuum Breaker Assembly. The contract will be awarded based on the Lowest Price Technically Acceptable criteria. Requirements include strict adherence to marking standards under MIL-STD-130 and packaging guidelines per MIL-STD 2073. Contractors must provide the Original Equipment Manufacturer details if they are not the manufacturer and must use the PIEE-WAWF system for electronic invoicing and receiving reports. The agreement mandates that any changes in production facilities be approved in writing by the Contracting Officer and may require a price reduction to cover administrative costs. Quality assurance is the responsibility of the contractor, who must maintain inspection records for 365 days following final delivery. Additionally, the contract specifies a strict protocol for design or part number substitutions, requiring specific code notifications and government approval for any changes beyond simple part number updates.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Supply of Pipe Cross Assemblies (NSN 4730-01-541-8067)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Hose Elbows (NSN 4730015085468)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Nonmetallic Strip Seals (NSN 5330005881051)

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Check Valves (NSN 4820016177314)

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Supply of Fluid Filter Elements (P/N ACB856F2)

MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days

AI Contract Overview

The solicitation SPMYM226Q7588 for the Main Valve Assembly, part number N587530059, is a sole source procurement issued by DLA Maritime - Puget Sound under the Department of Defense, with a scheduled response deadline of July 6, 2026, at 12:00 PM. The item is a direct replacement for existing valve components and must be compatible in form, fit, and function with systems currently deployed at the Puget Sound Naval Shipyard in Bremerton, WA. Offers must be submitted via email to Tricia Wintersteen and must include a completed and signed solicitation, manufacturer details, country of origin, and delivery lead time with FOB destination terms. The requirement is for four units to be delivered by November 30, 2026, under a firm fixed price arrangement, with inspection and acceptance occurring at the destination. Compliance with packaging standards per ASTM-D-3951 is mandatory, prohibiting the use of hazardous or unsuitable materials such as asbestos, excelsior, loose fill polystyrene, and untreated wood; non-manufactured wood must be heat treated to 56°C for 30 minutes and certified by an ALSC-accredited agency. Items must be marked with NSN, FSN, or part number and, if requiring Unique Item Identification, must conform to MIL-STD-130 and MIL-STD-129 for labeling and machine readability. The contractor must utilize the DLA Vendor Shipment Module for shipping documentation and submit invoices electronically through WAWF with payment processed using specified DoDAAC codes. Technical acceptability is a mandatory pass/fail gate, requiring full compliance with specifications, and award will be made to the technically acceptable offer most advantageous to the government based on combined evaluation of technical performance, past performance, and price or lead time. The contractor must comply with all applicable clauses including FAR 52.204-21 and 52.212-5, maintain current SAM registrations and representations, and adhere to flow-down requirements excluding all but 52.203-13 and 52.203-17 in subcontracts. Commercial Off-The-Shelf items are exempt from NIST SP 800-171 cybersecurity requirements, but all non-COTS products must have a current assessment conducted within the prior three years. The contractor must not contain mercury or

General Info

Sole source Main Valve Assembly procurement via DLA Maritime, due June 27, 2026, FOB destination, NIST SP 800-171 required unless COTS.

Agency

Department Of Defense → DLA Maritime - Puget SoundView Agency

NAICS

332919 - Other Metal Valve and Pipe Fitting ManufacturingView NAICS

Place of Performance

Bremerton, WA, 98314, USA

Set-Aside

NONE

Documents

(3)

Amendment 0001 to Solicitation SPMYM226Q7588

PDF•amendment

Solicitation SPMYM226Q7588 for Main Valve Assembly

PDF•rfq

Sole Source Justification for Leslie Valve Main Valve Assembly

PDF•justification-and-authorization

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseClosed

PostedJun 24

Solicitation

Amendment 1Jul 1

Contract was updated

Response DeadlineJul 6

Deadline has passed

Submission Closed

07/06/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DLA Maritime - Puget Sound

Contacts1 person available

OfficeBREMERTON, WA, 98314-5000, USA

Organization / Agency

Department Of Defense → DLA Maritime - Puget Sound

View Agency Profile

Office AddressBREMERTON, WA, 98314-5000, USA

Contacts

TRICIA WINTERSTEEN

contact@example.gov

+1 (555) 000-0000

Full Description

THE ATTACHED SOLE SOURCE SOLICITATION AND ANY SUBSEQUENT AMENDMENTS WILL BE POSTED TO THE SAM WEBSITE: SAM.GOV

FOR YOUR BID TO BE DEEMED RESPONSIVE IT MUST INCLUDE: COMPLETED AND SIGNED SOLICITATION, MFR., COUNTRY OF ORIGIN, LEAD TIME FOR DELIVERY (please quote FOB destination).

QUOTES MUST BE SUBMITTED VIA EMAIL

EMAIL: TRICIA.WINTERSTEEN@DLA.MIL

In order to be considered for award, if the contractor (awardee) is required to implement NIST SP 800-171, the contractor (awardee) shall have a current assessment as detailed in DFARS 252.204-7019 (I.E., not more than 3 years old unless a lesser time is specified in the solicitation)

**Items deemed to be Commercial Off The Shelf (COTS) are exempt from NIST SP 800-171 requirement. Must identify and provide information to contracting officer on bid during solicitation period**