Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

MANDREL, ROLLER TUBE

Active
SPE8E5-26-T-3542Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a Mandrel, Roller Tube Expander with a dimension of 0.359 inches, identified by NSN 3456-00-640-3144 and part number 7017421871, for a quantity of seven units. Delivery is required within 167 days from the contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and DLA-specific requirements, including preservation methods, material specifications, and unit container codes, with marking adhering to MIL-STD-129 and no special marking codes applied. Palletization must follow DLA packaging standards, and the delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania. The contract incorporates technical and quality requirements referenced by R and I numbers from the DLA Master List, and any mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for approved functional uses such as batteries, fluorescent lights, or weapon systems, with additional containment requirements for portable devices. The solicitation number is SPE8E5-26-T-3542, issued by the Department of Defense under NAICS code 333515, with an original required delivery date of February 22, 2027, and a need ship date of January 4, 2027. The contract prohibits the intentional addition of mercury and mandates compliance with NAVSEA 5100-003D for containment, while also specifying that the revision of the DLA Master List in effect on the solicitation issue date governs technical and quality stipulations.

General Info

Procurement of seven roller tube units under DLA solicitation, open to all contractors, with response deadline July 20, 2026.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

333515 - Cutting Tool and Machine Tool Accessory ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE8E5-26-T-3542.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Khue Nguyen
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MANDREL,ROLLER TUBE
MANDREL, ROLLER TUBE EXPANDER
DIMENSION A 0.359 IN
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-E-17624B NOT 1 REVISION NR B DTD 06/06/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE8E5-26-T-3542
SECTION B
PR: 7017421871 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017421871 0001 EA 7.000
NSN/MATERIAL:3456006403144
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:30 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/04/2027 Original Required Delivery Date:02/22/2027
SPE8E5-26-T-3542 NSN/Part Number: 3456-00-640-3144 Quantity: 7 EA Purchase Request: 7017421871QTY: 7 Delivery: 167 days ADO

Similar Contracts

NAICS: 333515
New
DIBBS
CUTTER, MILLING, ANGLThe contract specifies the procurement of six milling cutters with a 2 3/4 inch diameter, 60-degree included angle, 1/2 inch face width, and a 1 inch hole diameter, all governed by technical standards including a Rockwell C62 to C66 hardness requirement for the cutting end and verification through testing. Each cutter must feature 18 to 20 teeth and comply with ASME B94.19 Revision A General 2 specifications. The contract strictly prohibits the intentional inclusion of mercury or mercury compounds in any supplied hardware, except for permitted exceptions such as batteries, fluorescent lamps, instruments, sensors, weapon systems, and chemical reagents authorized by NAVSEA, with mercury-containing portable devices requiring shockproof construction and a secondary containment barrier as stipulated by NAVSEA 5100-003D. Sampling and inspection protocols follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and acceptance requiring zero non-conformances unless otherwise directed. Packaging must adhere to MIL-STD-2073-1E with preservation method 30, no cleaning or drying, and wrapped in unspecified materials, with unit containers as EP and intermediate containers left undefined, all marked in accordance with MIL-STD-129 using special marking code 00–00 to indicate no special markings. Palletization follows DLA’s RP001 packaging requirements. The item, identified by NSN 3455-00-240-7322, is priced at a firm fixed rate with zero tolerance for quantity variance, delivered FOB origin within 60 days after contract award, and inspected and accepted at destination. Transportation and shipping instructions direct delivery to DLA Distribution Depot Oklahoma at Tinker AFB, with reference to DLAD procedural notes C19 and C20 for freight details. The contract, issued under solicitation SPE8E9-26-Q-0548, was posted on July 14, 2026, with responses due by July 21, 2026, and the material is required for delivery by June 16, 2027, under a
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333515
New
Federal
BAND SAWThis solicitation, numbered SPMYM226Q7620, issued by the Department of Defense’s DLA Maritime – Puget Sound, seeks a Metal Cutting Band Saw Machine, 460V, with part number VT4555M manufactured by AMADA, under a Total Small Business Set-Aside. All responses must be submitted electronically via SAM.gov, and bids must be completed in full and returned by email or fax to jack.edwards@dla.mil no later than July 1, 2026. To be deemed responsive, offerors must complete box 17A, read box 28, and sign boxes 30a, 30b, and 30c on page 1 of the Solicitation Form 1449, provide their CAGE code, quote FOB Destination Bremerton, WA, specify lead time, and clearly identify the manufacturer and country of origin for the product. Offerors must also verify compliance with FAR 52.204-24 by checking the appropriate boxes. Any contractor required to implement NIST SP 800-171 must have a current assessment dated within the last three years under DFARS 252.204-7019, though Commercial Off The Shelf items are exempt provided they are explicitly identified during bidding. The acquisition is governed by FAR and DFARS clauses including changes, termination for convenience, contract terms for commercial items, antiterrorism training, whistleblower rights, and electronic payment requirements. The contract requires delivery of one band saw to NAVIMFAC PNW DET Everett at Building 2202 by August 7, 2026, with two associated CDRLs: an Equipment Technical Manual (sanitized) per DI-TMSS-81675A and a Warranty Performance Report and Documentation per DI-SESS-81639B, both delivered to Building 2200. Pricing is firm fixed price for the unit and cost no fee for the deliverables. Inspection and acceptance occur at destination with a QA 5 level requiring seven days of evaluation. Packaging and marking must comply with ASTM-D-3951, prohibiting asbestos, excelsior, loose fill polystyrene, newspaper, and shredded paper; non-manufactured wood must be heat treated to 56°C for 30 minutes with ALSC certification. Items requiring Unique Item Identification
DLA Maritime - Puget Sound

POSTED

about 7 hours ago

DEADLINE

in about 21 hours
View Details
NAICS: 333515
New
Federal
PORTABLE GRINDING AND LAPPING MACHINEThis solicitation, issued under FAR Part 13 using Simplified Acquisition Procedures, is a combined synopsis and solicitation for a portable grinding and lapping machine for safety valves, set aside exclusively for small businesses. The requirement calls for one EFCO TSV-150 portable unit with a compressed air drive, complete with an independent stand, direct mounting capability, and a maintenance kit, along with a complete set of lapping discs and abrasives in 120, 400, 800, and 1200 grit. The equipment must meet strict technical specifications including an operating range of 1/2" to 6", a pneumatic motor with 380 W output, specific spindle and eccentric speeds, and a comprehensive list of included components such as geared scroll chucks, abrasive discs, insert pins, and a transport case. All items must be new, with no used or refurbished materials accepted, and performance must align with the government’s minimum essential needs as detailed in the statement of work. Responses must be submitted via email by July 15, 2026, and vendors must be registered in SAM.gov to be eligible for award. Evaluation will follow a lowest price, technically acceptable (LPTA) approach, requiring each vendor to submit a detailed technical capabilities statement verifying compliance with all specifications, including lead time, manufacturer details, country of origin, and complete item listing, alongside a separate, itemized price quote. Price reasonableness must be supported by invoices, catalogs, or prior government contract data upon request. Payment is only possible through WAWF, and vendors without a WAWF account cannot be paid. Shipping terms are FOB Destination, quotes must remain valid for at least 30 days, and all submissions must be in Word, Excel, or PDF format, including business size, CAGE code, and payment terms. Questions must be submitted by July 14, 2026, and responses received after this date may not be addressed.
DLA Maritime - Norfolk

POSTED

4 days ago

DEADLINE

in about 9 hours
View Details
NAICS: 333515
New
DIBBS
VALVE PLATE, HYDRAULICThe contract specifies the procurement of two valve plates for a hydraulic motor-pump, identified by NSN 4320-01-308-5276 and part number 30278 from Johnson Carbide Products Inc, with a total purchase value of $2.00 per unit. Delivery is required within 168 days from the contract award, with shipment originating FOB origin and inspection and acceptance occurring at the destination. The quantity must be delivered precisely as ordered with no variance allowed. Packaging must comply with ASTM D3951 and strictly adhere to MIL-STD-129 marking and labeling standards, with palletization following DLA Packaging Requirements for Procurement. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting industry standards. The product must be free from intentional addition or direct contact with mercury or mercury-containing compounds, except for specific exemptions such as functional uses in batteries, lighting, sensors, or Navy-specified reagents, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. The delivery destination is the DLA Distribution facility at New Cumberland, PA, and the required ship date is January 5, 2027, with an original delivery deadline of December 3, 2026. The solicitation number is SPE7M1-26-T-204E, issued under a federal acquisition program with NAICS code 333515, and primary point of contact is Michael Reese via email and phone provided.
MARITIME SUPPLY CHAIN

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 333515
New
DIBBS
PAD, ABRASIVEThe contract pertains to the procurement of abrasive pads identified by NSN 3460012891062 and part number SCOTCH-BRITE 7448 from 3M Company, with a total quantity of 406 boxes, each containing 20 pads, resulting in 8,120 individual units. The product must comply with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements. The unit of issue is BX, with no variance allowed in quantity, and delivery is FOB origin. Inspection and acceptance occur at the destination, with a required delivery date of November 16, 2026, and an original ship date of November 7, 2026. The contract references solicitation SPE8E9-26-T-3165 under NAICS code 333515 and is managed by the Department of Defense’s Construction & Equipment MRO Service. All packaging must be marked and labeled as specified, and delivery must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, following DLAD Proc Note C19 for transportation requirements. The primary point of contact is Matthew Kruc, with full compliance expected under covered defense information protocols.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

6 days ago

DEADLINE

in 6 days
View Details