Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Manicure Set Supply

Active
International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement and delivery of manicure sets equipped with standard cosmetic tools, intended for distribution by the St. Thomas Health Department, likely to support patient care initiatives or public health promotion efforts. The work is classified as a subcontract under the NAICS code 339991, which corresponds to other miscellaneous manufacturing, indicating the manufacturing and assembly of these sets by a vendor under the broader oversight of the Government of Jamaica through St. Thomas Health Services. The contract was posted on August 3, 2026, and while no specific solicitation number or set-aside designation is provided, it is clear that the tools are to be delivered as part of a public health program rather than for commercial resale. The place of performance and office address details are unspecified, and no point of contact information is listed, suggesting the procurement may be managed centrally under government channels in Jamaica. The primary focus is on ensuring timely and compliant supply of standardized manicure sets meeting the health department’s requirements for use in clinical or community outreach contexts. The contract's existence via the official Jamaican e-procurement portal confirms its formal public procurement status, and the absence of set-aside details implies that competition may be open to all qualified suppliers without preference for small, minority-owned, or local businesses.

General Info

Procurement of manicure sets for St. Thomas Health Department public health initiatives under Jamaican government contract.

Agency

Government of Jamaica → St. Thomas Health ServicesView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

JAM

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyGovernment of Jamaica → St. Thomas Health Services
ContactsNo contacts available
OfficeN/A
Organization / Agency
Government of Jamaica → St. Thomas Health Services
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Procurement and delivery of manicure sets containing standard cosmetic tools for distribution by the St. Thomas Health Department, likely for patient care or promotional purposes.

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L4-26-U-1055
The contract solicitation SPE7L4-26-U-1055 seeks 31 gaskets identified by NSN 5330-01-701-0239 under a Total Small Business Set-Aside, with a maximum contract value of $350,000 and a delivery deadline of 97 days after order placement. The item is classified as a commercial item and must be free of asbestos, with packaging strictly compliant with MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, opaque bag for all Direct Vendor Delivery, Foreign Military Sales, and stock shipments, particularly due to UV sensitivity of FSC 5330/5331 components. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, including special marking code 32 for shelf-life items, and all units must be uniquely identified per MIL-STD-130N with UHF RFID or 2D Data Matrix barcoding. The contract includes strict compliance with safeguarding covered defense information under 252.204-7012 and NIST SP 800-171 requirements, with mandatory cyber incident reporting, and prohibits procurement of covered defense telecommunications equipment from restricted entities. Invoicing is required through WAWF, with payment subject to accelerated payments to small business subcontractors, and inspection and acceptance occur at the destination by the Government under the fixed-price inspection clause. The solicitation mandates full representation of small business status and UEI/CAGE codes, with additional disclosures required for hazardous materials under 29 CFR 1910.1200 and for any covered defense telecommunications products. All deliveries are restricted to the continental United States under FOB Origin terms, and offers are evaluated on price and other factors, not solely on lowest cost. Deviations from standard FAR clauses apply throughout, particularly under Deviation 2026-00038, affecting clauses related to contract type, payment, subcontracting, and cybersecurity, with additional compliance required for whistleblower rights, restrictions on forced arbitration, and prohibitions on hexavalent chromium and toxic materials.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 9 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-916W
The contract is for the procurement of 600 linear feet of gasket material identified by NSN 5330-01-557-0920 and part numbers X-113BT and TRIMLIK-X-113BT, with a 10% allowable increase in quantity for a maximum delivery of 660 feet. The unit of issue is the foot and the contract总价 is $600 based on an implied unit price of $1.00 per foot. Delivery is required within five days after award to the specified location in Albany, GA, under FOB Origin terms, with inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E and DLA’s RP001 packaging requirements, including cold/dry preservation methods, and all items must be marked per MIL-STD-129 with no special marking required. The item is not classified as hazardous, but compliance with hazardous material protocols under IP025 and OSHA’s Hazard Communication Standard (29 CFR 1910.1200) is mandatory if applicable, along with submission of Safety Data Sheets prior to award. Radioactive material thresholds are defined, and notification is required if any component exceeds specified activity levels. The contractor must use WAWF for invoicing and must have a valid UEI and CAGE code, while also certifying compliance with regulations regarding covered defense telecommunications equipment and subcontractor disclosures. The award mechanism is likely Low Price Technically Acceptable, with proposals submitted electronically through DIBBS before the August 17, 2026 deadline. Special clauses cover whistleblower rights, former DoD official compensation restrictions, third-party data limitations, and government work product control, indicating a high level of regulatory oversight. The contract does not specify a contract type but involves a single CLIN with no options or indefinite-delivery elements, and no key personnel or security clearance requirements are identified.
LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7LX-26-U-9309
The contract solicitation SPE7LX-26-U-9309 is for the procurement of O-RINGS with NSN 5331-01-269-4323, under a Total Small Business Set-Aside, with an estimated quantity of 1,746 units and a maximum contract value of $350,000. The procurement is structured as an Indefinite Delivery Contract with deliveries required FOB Origin and an 84-day lead time after order placement. All units must comply with stringent military packaging standards including MIL-DTL-117 Type II, Class C, Style 1 for waterproof and greaseproof bagging, and MIL-STD-2073-1E for preservation and marking, with a shelf life of 180 months under controlled dry conditions and no extendability. Labeling must adhere to MIL-STD-129, including mandatory Data Matrix barcodes and special marking code 32 for shelf-life tracking, while prohibiting asbestos as defined by FED-STD-313 and hexavalent chromium, and requiring full compliance with OSHA’s Hazard Communication Standard for any hazardous materials. The solicitation mandates electronic submission through DIBBS by August 20, 2026, and all payments must be processed via Wide Area WorkFlow with standardized electronic invoicing formats. Technical and quality requirements are sourced from the DLA Master List of Technical and Quality Requirements, referenced through R and I numbers, and contractors must affirm small business status and provide UEI and CAGE codes as required for socioeconomic representation. The contract includes a comprehensive suite of FAR and DFARS clauses governing equal opportunity, trafficking in persons, employment verification, cybersecurity safeguards such as NIST SP 800-171 and safeguarding covered defense information, export controls, environmental protections, subcontracting for commercial items, inspection at destination by the government, accelerated payments to small business subcontractors, and prohibitions on procurement from communist Chinese military companies or covered defense telecommunications equipment. Payment and administrative details are not fully specified in the solicitation and will be finalized upon award, but a primary point of contact is Theodore Misiolek at the Strategic Acq Program Directorate. The contract does not specify evaluation factors, options, key personnel requirements, or security clearances, and no formal attachments are listed beyond operational references to standards.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 9 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
COVER, EXHAUST LINE
Solicitation # SPE8EF-26-Q-0167
The contract pertains to the procurement of four units of a cover for an exhaust line, identified by NSN 1730-00-691-5565, under solicitation SPE8EF-26-Q-0167. The requirement is priced on a firm fixed price basis with no tolerance for quantity variance, meaning exactly four units must be delivered. The item must be delivered within 60 days after the award date, with both inspection and acceptance occurring at the origin. Delivery is FOB destination, and the shipping address is located at Al Udeid Air Base in Qatar, with a final parcel post address in APO AE 09309-9998. Packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, wrapping materials, and unit container type D3, while marking must adhere to MIL-STD-129 with no special markings required. Palletization must also follow DLA’s procurement guidelines. The contract incorporates cybersecurity requirements via CMMC Level 2 Self-Assessment and defines covered defense information, with quality and technical standards sourced from the DLA Master List. The purchaser is a federal agency under the Department of Defense, with Sharon Forde listed as the primary point of contact. The material need date is May 16, 2023, and the contract includes internal government codes for tracking and logistics coordination.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7LX-26-U-9325
The contract solicitation SPE7LX-26-U-9325 is for the procurement of 5,156 O-rings with NSN 5331-01-537-0498 under an indefinite-delivery contract structure, with a maximum value of $350,000.00 and no guaranteed minimum quantity unless delivery orders are issued. Delivery is required within 128 days of the actual delivery order, with FOB Origin terms placing risk transfer on the contractor upon shipment from their facility. All items must comply with MIL-STD-2073-1E for packaging using Code U, D3 unit containers, E5 intermediate containers, and preservation Method 33 with dry/clean handling and hardboard cushioning. Marking must adhere strictly to MIL-STD-129, including standardized labeling with NSN, contract number, and quantity, and mandatory 2D Data Matrix barcoding for traceability. The contractor must ensure hazard communication compliance through OSHA’s 29 CFR 1910.1200, submitting Safety Data Sheets, hazard warning labels, and a table of exempted materials if any items fall under alternative federal labeling statutes. Inspection and acceptance occur at the destination per FAR 52.246-2, with the government assuming full responsibility for final quality control. Compliance with DFARS clauses is mandatory, including safeguarding covered defense information under 252.204-7012, prohibition of hexavalent chromium, restrictions on Chinese military company products, and cybersecurity controls aligned with NIST SP 800-171. Electronic invoicing via WAWF is required, and offerors must hold a valid UEI and CAGE code. Representations for small business size status and socioeconomic categories including 8(a), HUBZone, SDVOSB, WOSB, and EDWOSB must be provided, with joint ventures required to disclose partner UEIs. The solicitation incorporates deviations for multiple FAR and DFARS clauses effective February 2026, including equal opportunity, combating trafficking in persons, employment verification, sustainable product requirements, and cybersecurity measures. Payment and contract administration details, including DoDAACs and COR/COTR information, will be populated in the award documentation. The solicitation is being processed electronically through DIBBS with a response deadline of August 20, 2026
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 9 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
FELT, MECHANICAL, PRE
Solicitation # SPE7L1-26-T-917K
This contract pertains to the procurement of FELT, MECHANICAL, PREFORMED items identified by the NSN 5330-00-496-0967 and specific part numbers from qualified suppliers including LINEAR MOTION LLC, ONTIC ENGINEERING & MANUFACTURING, INC, and MISTEQUAY GROUP LTD. The item is classified as a commercial item and must comply with strict packaging requirements mandated by MIL-DTL-117, TYPE II, CLASS C, STYLE 1, ensuring protection in a medium duty, waterproof, greaseproof, and opaque bag to prevent UV degradation, applicable to all delivery types including direct vendor delivery, foreign military sales, and stock shipments. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must follow DLA’s packaging guidelines. The contract specifies a delivery of 57 units at a unit price of $57.00, totaling $3,249.00, with FOB origin terms, zero quantity variance allowed, and inspection and acceptance occurring at destination. The required delivery date is 55 days from award, with a need ship date of November 4, 2025, and an original required delivery date of October 21, 2025. All materials must be free of asbestos as defined by FED-STD-313, and transportation logistics are governed by DLA procedural notes C19 and C20. The contract reference is SPE7L1-26-T-917K, solicited under a federal acquisition framework, with the point of contact being Kallie Regula of the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7M1-26-Q-1336
This contract specifies the procurement of 2,000 O-rings made from synthetic rubber, identified by the National Stock Number 5331-00-248-3849 and part number MS29513-019, with detailed technical requirements aligned to SAE AS29513 Revision C dated October 1, 2016. The item is classified as a commercial item and must be manufactured by a supplier approved on the Qualified Products List (QPL); only QPL-approved manufacturers are eligible at the time of award. The product has a non-extendable shelf life of 180 months and is designated as a Type I (Code Y) item, with packaging and preservation strictly governed by MIL-STD-2073-1E and MIL-STD-129. Mercury and mercury-containing compounds are prohibited from direct contact with the item or its packaging, with exceptions only for functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, and any such components must meet additional containment standards. Packaging must be in a medium-duty, waterproof, greaseproof, and opaque bag per MIL-DTL-117, Type II, Class C, Style 1, especially for direct vendor delivery, foreign military sales, or stock shipments. Preservation methods require dry, clean packaging with no mercury-based compounds, and markings must comply with MIL-STD-129, including the special marking code for Type I shelf life. The delivery is FOB origin with a firm fixed price and zero variance allowed in quantity, to be delivered within 126 days after contract award, with inspection and acceptance occurring at the destination. The contract is subject to all technical and quality requirements referenced in the DLA Master List, and the sole point of performance and delivery is Tinker AFB, Oklahoma.
MARITIME SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SHIELDING GASKET, ELECTRONIC
Solicitation # SPE7MX-26-R-X039
The contract centers on the procurement of a shielding gasket, electronic, identified by NSN 5999-01-506-4338 and part number AVIATION DEVICES AND ELECTRONIC P/N AG736000-01, under solicitation SPE7MX-26-R-X039 issued by the Land Supplier Operations SMSG under the Department of Defense. It is an indefinite-delivery contract with a guaranteed minimum value of $2,004 and a maximum obligated amount of $1,491,112, allowing orders to be placed over a three-year period from the award date. The contract uses a firm-fixed price structure with pricing structured in four quantity ranges, from 161 to 3,852 units, based on estimated annual demand of 2,569 units. Deliveries are FOB origin, with final inspection and acceptance occurring at the destination, and all items must comply strictly with MIL-STD-2073-1E for packaging and preservation, including a dry clean preservation method, U packaging code, and BE unit container. Marking and labeling must adhere to MIL-STD-129 with Data Matrix or Code 128 barcoding, and bare part identification is governed by MIL-STD-130 via RQ017, requiring NSN, part number, and traceable lot or serial codes. Special labeling is required for test samples: “Product Verification Test Samples – Do Not Post to Stock,” along with contract and lot numbers. The contractor must supply full traceability documentation per DFARS 252.217-7026 and comply with Buy American and specialty metals requirements under 10 U.S.C. 4753, as well as DFARS restrictions on hexavalent chromium and foreign sourcing. Cybersecurity compliance with NIST SP 800-171 is mandatory for handling controlled unclassified information. All invoicing must be submitted via EDI, and the contractor must hold a valid UEI and CAGE code, with socioeconomic status certifications required for small business and other designated categories. Evaluation will be based on a balanced trade-off approach where price is paramount but not sole; past performance, proposed delivery, and surge and sustainment capabilities will be assessed, with award made to the offeror providing best value. The contracting officer retains full authority to inspect and accept goods, subject to material certification
LAND SUPPLIER OPERATIONS SMSG

POSTED

about 9 hours ago

DEADLINE

in 30 days
View Details

More opportunities from Government of Jamaica → St. Thomas Health Services

Same awarding agency

NAICS: 811490
New
International
On-Site Installation of Generator Spare PartsThe contract pertains to the physical installation of spare parts for a generator on-site, encompassing the full scope of work required to disassemble existing components, replace them with new parts, reassemble the system, perform functional testing to ensure proper operation, and complete thorough cleanup of the work area. This service is not a theoretical or remote assignment but demands direct, hands-on technical execution at the location where the generator is deployed, requiring skilled personnel familiar with generator systems and safety protocols. All activities must be conducted to maintain operational integrity and meet industry standards for reliability and performance. The contract is classified as a subcontract under the NAICS code 811490, which corresponds to other miscellaneous technical and trade services, and is issued by the Government of Jamaica through St. Thomas Health Services. It was posted on July 31, 2026, and while specific location details such as city, state, or zip code are not provided, the place of performance is implied to be within Jamaica, likely at a healthcare facility under the government's jurisdiction. The absence of a solicitation number and point of contact suggests this may be an internal or streamlined procurement process, and bidders must rely on the provided UI link for further procedural details and submission requirements.
Other Personal and Household Goods Repair and Maintenance

POSTED

5 days ago

DEADLINE

N/A
View Details
NAICS: 423620
New
International
Supply of Cummins Generator Spare PartsThe contract involves the procurement and supply of original equipment manufacturer or approved equivalent spare parts specifically for Cummins generator systems, encompassing critical components such as filters, gaskets, sensors, and control modules. These parts are essential for maintaining operational reliability and performance of the generator systems used by St. Thomas Health Services under the Government of Jamaica. The contract is structured as a subcontract under the NAICS code 423620, which corresponds to Wholesale Trade of Motor Vehicle Parts and Supplies, indicating a focus on industrial supply chain logistics rather than direct manufacturing or service provision. The posting date reflects a future procurement timeline, suggesting the need for advance planning and vendor preparation. The place of performance and agency address information is unspecified, but the solicitation is hosted on the Government of Jamaica’s eProcurement portal, confirming the jurisdiction and administrative framework governing the award. While there is no set-aside classification or point of contact provided, the inclusion of a direct link to the epps system implies that interested parties must access the platform for full solicitation details, submission protocols, and compliance requirements. The contract requires adherence to quality standards for OEM or approved equivalent parts to ensure compatibility and safety in critical healthcare infrastructure applications.
Household Appliances, Electric Housewares, and Consumer Electronics Merchant Wholesalers

POSTED

5 days ago

DEADLINE

N/A
View Details
NAICS: 238990
New
International
Installation and Site SetupThe contract involves the on-site placement, anchoring, and basic setup of delivered water tanks at a health department facility under the jurisdiction of the Government of Jamaica through St. Thomas Health Services. Although not explicitly detailed, the work likely includes preparing the ground, securing the tanks to ensure stability and safety, and conducting initial configurations necessary for operational use. The scope is limited to physical installation and foundational site preparation, with no mention of plumbing integration, water sourcing, or ongoing maintenance. The work is classified under NAICS code 238990, indicating it falls within other specialty trade contracting, typically encompassing specialized construction services not covered by broader categories. Subcontracted under a procurement initiative managed by the Government of Jamaica’s electronic procurement portal, the contract was posted on July 31, 2026, and is intended for performance at a federal health facility within Jamaica, though the exact location remains unspecified. There is no set-aside designation or organization type specified, and no point of contact details are provided within the posted data. The reference link directs interested parties to the official government e-procurement system for further details regarding submission, requirements, or deadlines, but no specific milestones, payment terms, or compliance obligations are outlined in the available information.
All Other Specialty Trade Contractors

POSTED

5 days ago

DEADLINE

N/A
View Details