Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

MANIFOLD ASSEMBLY, A

Active
SPE4A5-26-T-313DFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for a single unit of a Manifold Assembly, Aircraft, identified by NSN 4920-01-500-3427 and part number 293824, procured under solicitation SPE4A5-26-T-313D. Delivery is required within 103 days to Cherry Point, North Carolina, with FOB origin terms and no quantity variance permitted. The item is to be delivered unmarked with no unique identification required, as specified by the service customer, and must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements. The technical data needed for manufacturing is proprietary or insufficient for competitive procurement, and no approved technical data package currently exists. The contractor must adhere to DLA’s Master List of Technical and Quality Requirements, referenced by R and I numbers, and comply with CMMC Level 2 self-assessment and covered defense information provisions. Configuration changes require approval via Engineering Change Proposal or variance requests, and all supplies must be physically marked as per RQ017. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and unspecified attributes are to be verified at strict levels. The contract is issued by the Department of Defense under NAICS code 332721 and is managed by the ASC Supplier Operations OEM Division, with Hien-Van Trinh as the primary point of contact.

General Info

Single manifold assembly delivered to Cherry Point in 103 days under strict military standards with no variance, unmarked, CMMC Level 2 compliant.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

332721 - Precision Turned Product ManufacturingView NAICS

Place of Performance

PHANTOM RD BLDG 147 BAY A, CHERRY POINT, NC, 28533-5040, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Hien-Van Trinh
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MANIFOLD ASSEMBLY,A
MANIFOLD ASSEMBLY<(>,<)> AIRCRAFT


DSCR DOES NOT CURRENTLY HAVE AN APPROVED
TECHNICAL DATA PACKAGE AVAILABLE FOR THIS NSN.
DATA IS PROPRIETARY OR INSUFFICIENT FOR
COMPETITIVE PROCUREMENT.


RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.

SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SPE4A5-26-T-313D
SECTION B
THE BOEING COMPANY 76301 P/N 293824
VALCOR ENGINEERING CORPORATION 96487 P/N 293824
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017676461 0001 EA 1.000
NSN/MATERIAL:4920015003427
DELIVERY (IN DAYS):0103
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3113
SPE4A5-26-T-313D
SECTION B
PR: 7017676461 PRLI: 0001 CONT’D
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
Need Ship Date:00/00/0000 Original Required Delivery Date:07/29/2026
SPE4A5-26-T-313D NSN/Part Number: 4920-01-500-3427 Quantity: 1 EA Purchase Request: 7017676461QTY: 1 Delivery: 103 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332721
New
Federal
Precision Machining of Rotary Feedthrough ComponentsThe contract calls for the precision CNC machining of high-precision stainless steel components including housings, shafts, and flanges, specifically designed for use in vacuum-compatible environments. These parts must meet stringent dimensional tolerances and surface finish requirements to ensure performance under extreme operational conditions, typical of aerospace and space exploration applications. The work requires advanced machining capabilities, strict quality control, and adherence to material specifications that guarantee integrity and reliability in high-vacuum and high-stress settings. This is a subcontract solicitation issued by the NASA Shared Services Center under the National Aeronautics and Space Administration, with a NAICS code of 332721 for Metal Foundries. The opportunity was posted on July 29, 2026, and responses are due by August 3, 2026, at 2:00 PM. The place of performance and detailed address information are not specified, but the work is intended to support NASA’s mission-critical systems requiring ultra-reliable components. There is no set-aside designation, and the contract is open to eligible subcontractors capable of meeting the technical and regulatory demands of space-grade manufacturing.
NASA Shared Services Center

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332721
New
Federal
Mounting Hardware and Fastener SupplyThe contract involves the supply of high-strength bolts, brackets, bushings, and associated mounting hardware necessary to securely attach the blade to the motor grader lift group, ensuring proper function and safety during operation. All items must meet stringent performance and durability standards appropriate for heavy-duty earthmoving equipment, with emphasis on material quality, dimensional accuracy, and resistance to wear and environmental degradation. The procurement is designated as a Small Business Set Aside under the SBA, meaning only qualifying small businesses are eligible to respond, and the North American Industry Classification System code 332721 specifies the scope as forgings and stampings, aligning with the manufacturing nature of the required hardware. The solicitation was posted on July 29, 2026, with a response deadline of August 7, 2026, at 10:00 PM Eastern Time. Performance of the contract will be centered in Silver City, New Mexico, with a zip code of 88061, indicating that delivery or fulfillment is expected to occur at or near this location. The contracting entity is the Gila National Forest under the U.S. Department of Agriculture, which implies the hardware will be used in public land maintenance or infrastructure projects under federal supervision. No point of contact is listed, and the contract is structured as a subcontract, suggesting it may be part of a larger procurement effort managed by a prime contractor. All interested parties must submit proposals through the official SAM.gov portal prior to the deadline.
Gila National Forest

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 332721
New
Federal
Hardware Prototyping and Test Article FabricationThe contract titled Hardware Prototyping and Test Article Fabrication seeks qualified contractors to design, fabricate, and deliver physical prototype systems or test articles that include full integration with software components and the comprehensive delivery of technical data packages. The work is expected to involve advanced engineering and manufacturing capabilities to produce functional hardware that meets precise technical specifications, with an emphasis on seamless software-hardware interaction and thorough documentation. Proposals must be submitted by August 12, 2026, and the contract is structured as a subcontract under the Department of Defense, specifically managed by FA8750 AFRL Rik. The primary place of performance is in Rome, New York, with a NAICS code of 332721 indicating focus on metal forging and stamping, though the scope extends beyond that to include complex prototyping and system integration tasks. There is no set-aside designation, and the opportunity is open to eligible subcontractors capable of meeting the technical and logistical demands of the project.
FA8750 Afrl Rik

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 332721
New
DIBBS
Supply of Machine Bolts (NSN 5306-00-180-2748)The contract entails the manufacture or supply of 337 machine bolts identified by NSN 5306-00-180-2748, with all items required to meet established military specifications and domestic sourcing standards. The effort is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, reinforcing the goal of supporting small business participation in defense procurement. The North American Industry Classification System code 332721 indicates the work falls under the category of screw, nut, and bolt manufacturing. Performance of the contract will take place at Robins AFB, Georgia, with a response deadline of August 5, 2026, and the solicitation was posted on July 28, 2026. The contracting entity is the ASC Commodities Division under the Department of Defense, which oversees the acquisition of critical military hardware components. All supplies must comply fully with applicable defense standards and originate from U.S.-based sources to satisfy domestic preference requirements.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 332721
New
DIBBS
Strap Fastener (Loop) SupplyThe contract anticipates the supply of 50 units of strap fastener, identified by NSN 5340014536529, with all items required to meet MIL-STD-129 standards for packaging and labeling to ensure consistent military logistics compliance. Delivery must be made to Anniston Army Depot in Alabama, with the postal code 36201-5021, and the work falls under NAICS code 332721, indicating it is classified within the Metal Valve and Pipe Fitting Manufacturing sector. This is a subcontract opportunity issued under the Department of Defense’s Land Supply Chain initiative and is open for responses until August 10, 2026, with the solicitation originally posted on July 28, 2026. The procurement is not currently designated with a specific set-aside classification and all submissions must be made through the specified DIBBS platform to be considered valid.
LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 332721
New
DIBBS
Precision Machining of Aircraft Mounting BaseThe contract requires the manufacture of 25 precision-machined aircraft mounting bases per engineering drawing 901-347-543 and CAGE 97499 specifications, with all work performed to meet stringent aerospace tolerances using CNC milling, drilling, and finishing processes. The scope is strictly defined by technical requirements to ensure dimensional accuracy, surface finish, and material integrity appropriate for aerospace applications. This is a subcontract under a Total Small Business Set-Aside, designated under FAR 19.5, and classified under NAICS code 332721 for Metal Furnaces and Die, Die Casting, and Foundries. Only small businesses are eligible to respond, and the opportunity is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance required at a facility in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on July 28, 2026, and responses must be submitted by August 5, 2026, with further details accessible via the provided government procurement link.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 332721
New
DIBBS
Precision Fastener Manufacturing – Machine Bolt (NSN: 5306001802668)The contract calls for the manufacture and delivery of 196 precision machine bolts designated by the National Stock Number 5306001802668, all of which must strictly adhere to military standards governing quality, packaging, marking, and full traceability. These components are critical for defense applications and require compliance with stringent specifications to ensure reliability and interoperability within military systems. Production and delivery must be completed under the oversight of the ASC Commodities Division within the Department of Defense, with the place of performance located at Robins Air Force Base, Georgia, 31098-1887. The opportunity is structured as a subcontract and was posted on July 28, 2026, with a firm response deadline of August 5, 2026. The NAICS code 332721 indicates that the work falls under the category of Screw, Nut, and Bolt Manufacturing. Although no set-aside classification or point of contact is specified, interested parties must submit their proposals through the official DIBBS portal prior to the deadline to be considered for award, with all deliverables expected to meet defined military performance criteria without deviation.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 332721
New
DIBBS
Precision Machining of Spacer Sleeves (NAS43DD4-12)The contract calls for the manufacture of 1,429 precision spacer sleeves adhering to NAS43 Revision 12 specifications and MIL-STD-1916 zero-defect sampling standards, targeting critical aerospace applications where dimensional accuracy and reliability are paramount. All components must meet stringent quality controls to ensure zero defects through defined statistical sampling protocols, and production must align with the approved technical requirements without deviation. The work is classified as a subcontract under NAICS code 332721, indicating precision machining services, and is directed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV through a solicitation issued on July 28, 2026, with responses due by July 31, 2026. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and all deliverables must be completed and shipped to this location.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 332721
New
DIBBS
Precision Machining ServicesPrecision Machining Services is a subcontract solicitation issued by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV for the sub-tier machining of component parts designated for a mounting base. The work requires high-precision operations including drilling, tapping, and finishing to meet strict military specifications and tight tolerances, ensuring functionality and reliability in defense applications. The contract falls under NAICS code 332721, which classifies it as metal finishing and related services, and the place of performance is identified as FPO with ZIP code 09595. The solicitation was posted on July 28, 2026, with a response deadline of August 5, 2026, and is accessible through the DIBBS system under solicitation number SPE4A726T597V. There is no set-aside designation specified, and no point of contact information is provided in the posting.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 332721
New
DIBBS
Precision Fastener Manufacturing – Self-Locking Hex NutsThe contract requires the manufacture and supply of 1,934 self-locking hexagonal nuts compliant with military specifications, ensuring precise dimensional conformance for Class 3A and 3B threads as defined by FED-STD-H28/20. These fasteners must meet rigorous quality standards for use in defense applications, with production and delivery tied to strict technical and performance requirements. The work is scoped as a subcontract under NAICS code 332721, designated for screw, nut, and bolt manufacturing, and is being procured by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 28, 2026, with a response deadline of August 5, 2026, and the place of performance is designated as San Diego, California, with the zip code 92136-3581. The contract does not specify a set-aside type, and there is no assigned solicitation number listed. All submissions must be made through the DIBBS platform using the provided UI link, and compliance with the stated technical standards is mandatory for award consideration.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 332721
New
DIBBS
Nonmetallic Grommet SupplyThe contract involves the procurement, packaging, marking, and delivery of nine nonmetallic grommets that must meet military and hazardous material standards, ensuring compliance with stringent operational and safety requirements. The work is classified as a subcontract under NAICS code 332721, indicating a focus on metal stamping and related manufacturing activities, though the grommets themselves are nonmetallic. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contracting agency is the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 28, 2026, with a firm response deadline of August 5, 2026, leaving a one-week window for interested parties to submit proposals. The contract is part of a broader defense logistics effort, and while no set-aside type is designated, the requirement demands strict adherence to military specifications for materials and handling procedures, particularly concerning hazardous material compliance. All packaging and marking must align with federal and defense logistics protocols to ensure seamless integration into the supply chain. Interested vendors can access further details through the provided DIBBS link.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 332721
New
DIBBS
Precision Machined Parts Supply (Part Number: 0001-500000052)The contract involves the supply of a precision-machined component identified by Part Number 0001-500000052, requiring strict adherence to defense-grade quality standards, full material and process traceability, and completion of First Article Testing to ensure conformance with specifications. This subcontract is categorized under NAICS code 332721, indicating the work falls within the precision machining and manufacturing sector, and is being procured by the Department of Defense through its ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 28, 2026, with a firm response deadline of August 7, 2026, at 17:00 UTC, leaving a limited window for qualified suppliers to submit proposals. The place of performance and specific location details are not provided, but the component must meet exacting military requirements, implying the work may involve secure facilities or controlled supply chains. All submissions must be made through the official DIBBS portal linked in the notice, and failure to comply with documentation, testing, or delivery timelines may result in disqualification or contract termination.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 333611
New
DIBBS
HEAT EXCHANGER
Solicitation # SPE4A5-26-T-313C
The solicitation requires the delivery of one unit of Heat Exchanger, NSN 2835-01-062-4699, within 90 calendar days from contract award for mandatory first article testing at Hill Air Force Base, with written approval or disapproval to follow within 90 days of government receipt. The contractor must provide details of current dealer or distributor certification and cannot use covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016. Domestic material restrictions under the Berry Amendment and Buy American Act apply, with thresholds reduced to $150,000, requiring disclosure of non-domestic materials. Offers must not include items produced via additive manufacturing unless specifically approved. Offerors are strongly encouraged to quote quantity ranges due to fluctuating demand to avoid administrative delays. All vendors must register via DLA’s AMPS system within two months to retain access to the Vendor Shipment Module and continue shipping. Small business joint ventures must submit specific representations for eligibility categories. Fast Pay is not applicable. Offers must also confirm compliance with all relevant clauses regarding foreign sourcing and certification, and any anticipated late submissions must be logged as “No Bid” on DIBBS to avoid assumption of non-responsiveness.
Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
DIBBS
INSERT, THREADED, SEL
Solicitation # SPE4A5-26-T-312Z
The item specified is an INSERT, THREADED, SEL with NSN 2840-01-087-4205 and a quantity of 179 units, subject to strict export control regulations under either ITAR or EAR. Technical data associated with this item cannot be disclosed or exported to foreign persons, including foreign nationals within the United States or overseas, without prior authorization from the Department of State or Department of Commerce. Distribution of this controlled data is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by DLA to access such information. DFARS 252.225-7048 governs compliance with these restrictions, applying equally to U.S. companies and their foreign subsidiaries. This solicitation, identified as SPE4A5-26-T-312Z, was posted on July 29, 2026, with responses due by August 6, 2026. The procurement falls under NAICS code 336412 and is managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. The place of performance is Corpus Christi, Texas, with a delivery deadline of 58 days after order placement. Point of contact for inquiries is Amanda Bowling, reachable via email and phone provided. The contract is a federal solicitation with no set-aside designation, and all participants must adhere to the specified export control and handling protocols to qualify for award.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
BEZEL, INSTRUMENT MOUNT
Solicitation # SPE4A5-26-T-312R
The contract is for the procurement of two bezels for instrument mounting, identified by part number AM11085 and NSN 6695011227941, supplied by ONTIC ENGINEERING & MANUFACTURING UK. The item is designated as a critical application component and must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, including specific preservation methods, wrapping materials, and unit container codes, while marking follows MIL-STD-129 with no special marking codes. Inspection and acceptance occur at destination, with zero tolerance for non-conformances under sampling rules based on MIL-STD-1916 or equivalent zero-based plans, assigning verification levels or AQLs based on attribute criticality. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and the supplier must meet documentation requirements for source approval. The item is not subject to Unique Identification per customer request, and government identifiers must be removed from non-accepted supplies. Delivery is FOB origin with a required delivery date of November 19, 2027, and a need ship date of January 25, 2027, with a 171-day lead time. The shipment is to be sent to DLA Distribution Jacksonville, with freight details and transportation protocols governed by specific DLA procedural notes.
Other Measuring and Controlling Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
COUPLING, WIRE ROPE,
Solicitation # SPE4A5-26-T-312X
This contract is for the procurement of four wire rope couplings, identified by NSN 4030-01-654-3836 and part numbers 234-517-9242 and NM135055-0450, supplied by Honeywell International Inc. and Eaton Aeroquip LLC under solicitation SPE4A5-26-T-312X. The item is designated as a critical application component requiring strict compliance with Federal Aviation Administration airworthiness standards, FAA bare item marking requirements, and DLA packaging and preservation regulations per MIL-STD-2073-1E and MIL-STD-129. Supply chain traceability documentation must be retained by the contractor in accordance with DLA Directive Procurement Note C03, and cybersecurity compliance is mandated at CMMC Level 2 via self-assessment. Quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required in sampling unless otherwise specified, and critical, major, and minor attributes are verified at levels VII, IV, and II respectively. Delivery is FOB origin with inspection and acceptance occurring at the destination, with a required delivery date of July 17, 2026, and a 101-day lead time. Packaging must adhere to DLA packaging requirements, palletization standards, and special marking codes, with no special markings required. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with no quantity variance permitted.
Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334220
New
DIBBS
PARTS KIT, ELECTRONI
Solicitation # SPE4A5-26-T-312T
This contract pertains to a Parts Kit, Electronic with NSN 5895-01-587-8342, requiring the delivery of 162 kits under solicitation SPE4A5-26-T-312T. The kits must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The kit must be assembled and packaged per MIL-STD-2073-1E Appendix D, with all components contained in a single box sufficient to prevent damage, properly cushioned to inhibit movement, and labeled with a detailed contents list including part numbers, NSNs, and quantities per kit. Marking and barcoding must conform to MIL-STD-129, and palletization must meet DLA packaging requirements. No unique item identification is required per customer direction, and sampling follows MIL-STD-1916 or equivalent zero-based plans with acceptance criteria of zero non-conformances unless otherwise specified in the contract. Delivery is mandated FOB origin within 95 days, with inspection and acceptance occurring at destination, and no variance in quantity is permitted. The preservation method is specified as preservative type 10 with dry packaging, using the materials and methods prescribed in the contract, and all packaging must be labeled with the code U without special marking. The delivery address is DLA Distribution Red River in Texarkana, TX, with a required ship date of November 10, 2026, and an original required delivery date of March 3, 2028. The item is classified as a Critical Application Item by The Boeing Company, and cybersecurity compliance requires a CMMC Level 2 self-assessment. Documentation for source approval, configuration change management, and removal of government identification from non-accepted items are mandated, with all supply chain activities subject to defense information protection and transportation guidelines as outlined in DLA procedural notes.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PANEL, STRUCTURAL, AI
Solicitation # SPE4A5-26-T-313E
This contract pertains to the procurement of a structural panel designated as PANEL, STRUCTURAL, AI with part number 145T4897-123 and NSN 1560016558444, for a quantity of four units at a unit price of $4.00, totaling $16.00. Delivery is required within 198 days from the contract award, with FOB origin terms and inspection and acceptance occurring at the destination warehouse in Tracy, California. The item is classified as a critical application item under The Boeing Company and must comply with stringent technical and quality requirements referenced through the DLA Master List, including configuration change management, supply chain traceability documentation per DLA Directive Procurement Note C03, and FAA-specific marking and airworthiness certification requirements. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with specific preservation methods, container types, and palletization as dictated by DLA Packaging Requirements. No government identification removal or unit identification marking is required per customer direction, and sampling follows MIL-STD-1916 or comparable zero-based plans with zero non-conformances unless otherwise specified. The contractor is also subject to cybersecurity compliance under CMMC Level 2 Self-Assessment and must retain full supply chain traceability records in accordance with DLA guidance. Transportation and freight shipping instructions follow DLAD Proc Notes C19 and C20, with the same destination as the parcel post address. The contract includes applicable CDRLs and references to the Technical Data Package, particularly Quality Assurance Provision 13873 and CDRL-FAACERTCOM-25015, dated January 14, 2025. Compliance with higher-level quality requirements outlined in Procurement Note L32 is mandatory, and all marking, packing, and documentation must align with FAA and DLA specifications. The solicitation number is SPE4A5-26-T-313E, with a response deadline of August 6, 2026, and a required delivery date of December 20, 2025, while the need ship date is set for May 12, 2026. The NAICS code is 336413, and the contracting office is the ASC Supplier Oper OEM Division, Department of Defense.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
CHAIN, WELDED
Solicitation # SPE4A5-26-T-312V
This contract, identified as SPE4A5-26-T-312V, pertains to the procurement of 176 units of Welded Chain with NSN 4010-01-058-4771, under a solicitation issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. The delivery is scheduled 618 days after award, and no fast pay provisions apply. The contractor is required to conduct First Article Testing on two units of the specified item and submit a formal test report within 60 calendar days of contract award, with prior written notice given at least 14 days before shipment for Government Final Acceptance Testing. The Government has 30 days after receiving the report to issue written approval, conditional approval, or disapproval. Production Lot Testing is mandatory following First Article approval, requiring the contractor to test ten randomly selected samples from the production batch, with full lot rejection if any sample fails. All PLT testing must be notified to the Contracting Officer and Quality Assurance Representative 14 days in advance, and all test results must be documented per DI-NDTI-80809B, accompanied by DD Form 1222, DD Form 250, process certifications, inspection sheets, and marked drawings. The contractor must also cover the cost of materials consumed during testing within the CLIN pricing and ensure all documentation provided with shipments meets Government requirements for traceability and confidentiality. The place of performance is New Cumberland, PA, with Hien-Van Trinh serving as the primary point of contact.
Other Fabricated Wire Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
BRACKET, PEDAL
Solicitation # SPE4A5-26-T-312W
The contract pertains to the procurement of seven units of a pedal bracket identified by NSN 1680-01-608-8421, with a delivery requirement of 128 days after order. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Source approval documentation is mandated, and the item is subject to covered defense information and Cybersecurity Maturity Model Certification Level 2 self-assessment requirements. Packaging must comply with DLA specifications, and government identification must be removed from non-accepted supplies. Physical identification of the bare item is required, though item unique identification is not mandated per the service customer’s request and DFARS 252.211-7003(c)(1)(i). Technical data associated with the item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including within the U.S., and requiring compliance with DFARS 252.225-7048. Access to such data is restricted to contractors approved by DLA who hold a valid US/Canada Joint Certification Program certification and have completed mandatory training and questionnaire requirements. The solicitation, numbered SPE4A5-26-T-312W, was posted on July 29, 2026, with responses due by August 6, 2026, under NAICS code 336413. Performance is to be delivered to Corpus Christi, Texas, 78419-5255, with primary point of contact Renee Wassum at DLA.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
DIBBS
HOUSING, DRIVE
Solicitation # SPE4A5-26-T-312U
Offerors must comply with strict domestic material requirements under the Berry Amendment, Buy American Act, and related clauses, with the Berry threshold lowered to $150,000, necessitating full disclosure of any non-domestic materials in quotes. The solicitation prohibits the use of covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and no items produced via additive manufacturing may be included without prior written approval. Quoters are strongly encouraged to provide quantity ranges due to fluctuating demand, ensuring flexibility for buyers without requiring resolicitation, though this does not apply to Auto IDC. Small business joint ventures must submit all required certifications under FAR provisions 52.212-3 and 52.219-1 for applicable categories. All contractors must register through the new DLA Account Management & Provisioning System (AMPS) within two months to access the Vendor Shipment Module and maintain shipping capability, with WebServices users required to update their schema by the specified date. Failure to register or update will result in loss of shipping access. Offerors unable to quote by the closing date must submit a “No Bid” on DIBBS with an anticipated quote date or reason to avoid assumption of non-procurability. Fast Pay is not applicable, and the item in question is a drive housing, quantity two, with a 183-day delivery window under solicitation SPE4A5-26-T-312U, managed by the Department of Defense’s ASC Supplier Operations OEM Division.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332911
New
DIBBS
GAGE, PRESSURE, DIAL IND
Solicitation # SPE4A5-26-Q-0655
The contract pertains to the procurement of 13 units of a pressure dial indicating gage with NSN 6685-01-539-5318 under solicitation SPE4A5-26-Q-0655, with a firm fixed price and zero tolerance for quantity variance. Delivery is required within 52 days after award, with inspection and acceptance occurring at the destination. Packaging must comply with DLA’s RP001 requirements, adhering to MIL-STD-129 for marking and labeling, and ASTM D3951 for commercial packaging unless the item is classified hazardous under FED-STD-313, in which case TQ requirement IP025 applies. The DLA Master List of Technical and Quality Requirements governs all technical and quality standards, superseding other specifications. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attribute verification levels are fixed at VII, IV, and II for critical, major, and minor characteristics respectively. Palletization must conform to RP001, and unit of issue is specified as each. The item must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation protocols aligned to DLAD PROC NOTE C19 and C20. The procurement is for a federal customer with a material need date of February 20, 2026.
Industrial Valve Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334511
New
DIBBS
SEXTANT, MARINE
Solicitation # SPE4A5-26-T-312S
The contract pertains to the procurement of 57 marine sextants, identified by part number A-A-59005 and NSN 6605-01-253-3442, classified as a commercial item with specified deviations from the standard Federal Commercial Item Description. The sextants must be furnished without batteries or spares to prevent degradation during storage, and certain specifications such as horizon bubble requirements and accuracy tolerances are modified per exceptions outlined in the contract. The item is designated as a critical application item and must comply with Technical Data Package Revision B Generation 2 under QAP-13873. All units are subject to zero-defect acceptance under MIL-STD-1916 or comparable zero-based sampling plans, with unspecified attributes treated as major and inspection performed at origin. Mercury and mercury-containing compounds are strictly prohibited in manufacturing, packaging, or handling except in limited functional applications explicitly exempted by NAVSEA, and any such devices must include secondary containment. Packaging must conform to MIL-STD-2073-1E and MIL-PRF-23199, with labeling and barcoding per MIL-STD-129, and no special marking is required. The delivery is FOB origin within 164 days, with a required ship date of January 18, 2027, and a final delivery deadline of September 3, 2027. The item is non-hazardous per HMIC review, no shelf life applies, and no unit identification is mandated. All quality, inspection, and packaging requirements are governed by DLA’s master list of technical and quality requirements referenced in the contract, and the sole point of delivery is the DLA Distribution facility in New Cumberland, Pennsylvania.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
LEAD, ELECTRICAL
Solicitation # SPE4A5-26-T-312Q
The contract pertains to the procurement of four electrical leads, part number 373111-5, supplied by Honeywell International Inc., under the NSN 6150008380246, with a total price of $16.00 at $4.00 per unit. Delivery is required within 20 days FOB origin to Fort Wainwright, Alaska, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly follow MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Packaging and palletization adhere to DLA’s procurement standards, including specific preservation, wrapping, and containerization codes. The item is exempt from unique identification and shelf life requirements, and configuration changes require formal engineering change proposals. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero nonconformances unless otherwise stated, with attributes classified per defined verification levels. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. Shipment logistics comply with DLA procedural notes for transportation and freight, and the contract is managed under the DoD’s authorized unit of issue system.
Other Electronic Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details