This Solicitation opportunity from Department Of Defense was posted on October 23, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

MANIFOLD ASSEMBLY, HYDRAULIC

Closed

SPRDL1-25-R-0202Federal

Submission Closed07/23/2025, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332912

New

DIBBS

Supply of Fluid Pressure Regulating ValvesThis subcontract involves the supply of two fluid pressure regulating valves for prime contractors supporting the Defense Logistics Agency. The specific requirement is for NSN 4820002856125, corresponding to Watts Regulator Co part number R-119-02C. All items must be delivered FOB Origin and must adhere to strict packaging and marking standards, specifically ASTM D3951 for packaging and MIL-STD-129 for shipment marking. The procurement falls under NAICS code 332912 and is managed through the Department of Defense. Interested parties must note the response deadline of November 9, 2026, to ensure compliance with the solicitation timeline established by the agency.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Fuel and Oil Servicing Nozzles (NSN 4930-01-574-2434)This subcontract involves the manufacture or sourcing of 12 fuel and oil servicing nozzles, specifically NSN 4930-01-574-2434, for prime contractors delivering to DLA Troop Support. The contractor must ensure all units are produced according to the DLA Master List of Technical and Quality Requirements and adhere to strict marking, labeling, and palletization standards per MIL-STD-129 and RP001. All materials provided under this agreement must comply with the Buy American Act and the Berry Amendment. The performance of this contract is centered in Cherry Point, and the procurement falls under NAICS code 332912 for the Department of Defense.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Copper Alloy Ported Ball Valve Supplier (NSN 4820013401540)This subcontract involves the supply of three copper alloy ported ball valve units for prime contractors supporting the Defense Logistics Agency. The supplier is responsible for manufacturing or sourcing the valves according to NSN 4820013401540, with a strict requirement that no mercury or mercury-containing compounds are intentionally added. All deliverables must adhere to the DLA Master List technical and quality requirement RA001. The contract mandates full compliance with the Berry Amendment and the Buy American Act to ensure domestic sourcing standards are met. The opportunity is categorized under NAICS code 332912 and is managed by the Department of Defense. Interested parties must respond by November 9, 2026, for performance located at FPO 09514.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Linear Direct Control ValvesThis subcontract involves the manufacture or procurement of 15 Linear Direct Control Valves, specifically matching Astec Industries Inc Part Number 31F98 and NSN 4820011263316, for prime contractors supporting DLA supply contracts. The selected provider must ensure all units are packaged according to RP001 and ASTM D3951 standards and marked in compliance with MIL-STD-129. Final delivery of the packaged and labeled valves is required at USS Ft Lauderdale. The agreement is managed under the DLA Weapons Support Land Supply Chain within the Department of Defense. To maintain compliance, the contractor must adhere to DFARS 252.204-7012 cybersecurity standards and DLA RA001 quality requirements. The project falls under NAICS code 332912, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7MC-27-T-1315

Solicitation SPE7MC-27-T-1315 is a small business set-aside request for quotations issued by the Defense Logistics Agency Weapons Support Maritime Hardware/Electrical for the procurement of one fluid valve stem, identified by NSN 4820-01-348-4525. The required delivery date is October 22, 2026, with shipping terms set as FOB Destination to the Nuclear Power Training Unit in Goose Creek, South Carolina. Quotations must be submitted by November 9, 2026. The manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003, and destination inspection is required. The contract incorporates stringent technical and security requirements, including DLA packaging requirements (RP001), MIL-STD-129 marking, and MIL-STD-2073-1E packaging standards. Due to the nature of the technical data, the item is subject to ITAR or EAR export controls, requiring offerors to possess an approved US/Canada Joint Certification Program (JCP) certification and DLA authorization to access the data. Additionally, the procurement prohibits the use of additive manufacturing processes without prior approval and mandates compliance with DFARS cybersecurity standards, including safeguarding covered defense information and reporting cyber incidents. Payment and invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system.

Defense Logistics Agency

POSTED

DEADLINE

VALVE, LINEAR, DIRECTION

Solicitation # SPE7M1-27-T-1728

Solicitation SPE7M1-27-T-1728 is a small business set-aside issued by the Defense Logistics Agency Weapons Support Maritime Supply Chain for the procurement of one linear directional control valve. The required item is identified by NSN 4820015666397 and Deere & Company part number AT345515. The contract specifies a delivery timeframe of five days after receipt of order, with an original required delivery date of September 2, 2026. Shipping is established as FOB Origin, with the final destination and inspection point located at the Distribution Management Office at MCBH Kaneohe Bay, Hawaii. The procurement is governed by strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements and MIL-STD-129 for marking. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements under RP001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The award process may utilize automated award mechanisms and incorporates the HUBZone price evaluation preference. Key regulatory clauses are included, such as DFARS 252.204-7012 for cybersecurity and safeguarding of defense information, as well as the Buy American and Balance of Payments Program.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

VALVE, LINEAR, DIRECT

Solicitation # SPE7L1-27-T-2909

Solicitation SPE7L1-27-T-2909, issued by the DLA Weapons Support Land Supply Chain, is for the procurement of 15 linear direct control valves, identified by NSN 4820011263316 and Astec Industries Inc part number 31F98. The contract specifies a delivery timeframe of 20 days after order, with the destination for inspection and acceptance being the USS Ft Lauderdale (LPD 28) at FPO AE 09595. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS) by November 9, 2026. The procurement is governed by NAICS code 332912 and includes strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. Marking and labeling must comply with MIL-STD-129, and palletization must follow RP001 requirements. Key regulatory clauses include FAR 52.246-1 for destination inspection, DFARS 252.204-7012 for cybersecurity and incident reporting, and various deviations related to sustainable products and human trafficking. Invoicing and receiving reports are to be processed electronically through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

VALVE, REGULATING, FLUID

Solicitation # SPE7M1-27-T-1734

Solicitation SPE7M1-27-T-1734 is a small business set-aside issued by the Defense Logistics Agency for the procurement of 15 fluid pressure regulating valves, identified as critical application items. The requirement specifies part numbers 23011063 and DAX31336 from Allison Transmission Inc, under NSN 4820010794802. Delivery is required within five days after receipt of order, with an original required delivery date of October 26, 2026. The items are to be shipped to the Anniston Army Depot in Alabama, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to quality and packaging standards, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with palletization governed by DLA requirement RP001. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with the Buy American Act and Berry Amendment. Additionally, the solicitation prohibits the use of additive manufacturing for the items and requires adherence to NIST SP 800-171 and DFARS cybersecurity standards for safeguarding covered defense information.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

VALVE, REGULATING, FLUID

Solicitation # SPE7MC-27-T-1302

Solicitation SPE7MC-27-T-1302 is a small business set-aside issued by the Defense Logistics Agency for the procurement of two fluid pressure regulating valves, specifically NSN 4820-00-285-6125 and Watts Regulator Co part number R-119-02C. The contract specifies delivery to Soto Cano Air Base in Comayagua, Honduras, with an original required delivery date of October 23, 2026, and a delivery timeline of 20 days after order. Terms are set as FOB Origin, with both inspection and acceptance occurring at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 for general packaging and MIL-STD-129 for labeling, while palletization must follow DLA requirement RP001. Technical and quality requirements are governed by the DLA Master List, including the removal of government identification from non-accepted supplies. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The contract incorporates various FAR and DFARS clauses covering cybersecurity, domestic sourcing via the Buy American Act, and the prohibition of covered defense telecommunications equipment.

Defense Logistics Agency

POSTED

DEADLINE

HOSE ASSEMBLY, AIR DUCT

Solicitation # SPE8E9-27-T-0297

Solicitation SPE8E9-27-T-0297 is a Request for Quotations issued by the DLA Troop Support Construction and Equipment MRO Service I for the procurement of 41 units of air breathing air duct hose assemblies, identified by NSN 4240-00-770-0268. The contract requires delivery within 115 days, with a need ship date of March 5, 2027, and an original required delivery date of March 14, 2027. Delivery is FOB Origin, with the final destination being the Distribution Depot Puget Sound in Bremerton, Washington. Both inspection and acceptance will occur at the destination. The contractor must adhere to strict technical and quality requirements as specified in the DLA Master List, as well as packaging and marking standards MIL-STD-2073-1E and MIL-STD-129. Special restrictions include a prohibition on the intentional addition of mercury and a ban on items produced via additive manufacturing unless specifically authorized. The procurement is governed by various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and hazardous material identification. Quotations are due by November 9, 2026, and must be submitted to the issuing office in Philadelphia, Pennsylvania.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # N0010427QX073

Solicitation N0010427QX073, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a request for quotation for the repair of aviation components to support Foreign Military Sales cases. The scope of work includes the repair of three pneumatic motors (NSN 2895013833198, P/N 6769111) and one electronic components assembly (NSN 5998015286638, P/N 7635814). Repaired items must meet original manufacturer specifications and operational requirements, with the contractor maintaining the total equipment baseline configuration. Delivery schedules vary by line item, with some estimated by February 26, 2027, and others required within 180 calendar days of award or induction. The contract mandates strict adherence to quality and packaging standards, including ISO 9001 compliance and MIL-STD-2073-1 for military packaging. All shipments must be marked according to MIL-STD-129 and MIL-STD-130, with specific requirements for DLR labels and FMS bar coding. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system. The solicitation is not a small business set-aside and incorporates various DFARS and FAR clauses regarding cybersecurity, supply chain risk, and trade agreements. Proposals must be submitted electronically to the designated point of contact, and quotes limited solely to test and evaluation fees will not be accepted.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Supplier of Pressure Regulating Valve Body Parts KitsThis subcontract through the Department of Defense involves the supply of four pressure regulating valve body parts kits to support DLA Weapons Support Maritime Hardware contracts. The required components must match NSN 4820009686699, specifically Kitco LLC or Meggitt North Hollywood Inc part number 26310009. Performance will take place in Cherry Point, North Carolina, under NAICS code 332912. The contract mandates strict adherence to Critical Application Item quality standards and requires that all parts meet Buy American Act domestic origin requirements. Additionally, the supplier must complete a CMMC Level 2 self-assessment to ensure cybersecurity compliance. Responses for this requirement are due by November 9, 2026.

CHERRY POINT PHANTOM RD BLDG

POSTED

1 day ago

DEADLINE

in 12 days

AI Contract Overview

This contract solicitation, issued by the Defense Logistics Agency (DLA) Land Warren, seeks suppliers for hydraulic manifold assemblies identified by NSN 4730-01-518-9033 and manufacturer part number 12438346-2. It is a firm-fixed-price type with an initial production quantity increased to 15 units and an additional option for up to 15 more units as amended. Delivery is FOB destination with packaging meeting MIL-B standards. The contract requires adherence to a tightly controlled Technical Data Package (TDP), accessible only to those certified under the United States/Canada Joint Certification Program (JCP), ensuring export control compliance and safeguarding sensitive design data. Suppliers are required to provide full traceability of the supply chain, including CAGE codes and batch identifiers, and to comply with strict environmental standards, including prohibitions on ozone-depleting substances unless specifically approved. The solicitation process includes a sealed bid format with an established deadline extended to November 6, 2025. A potential reverse auction may be conducted post-submission to finalize pricing. Offerors must register on relevant platforms, submit bids electronically, and include all necessary certifications and representations as per FAR requirements. Inspection and acceptance occur at the origin, with government oversight requiring coordination with DCMA prior to shipment, including a First Article Test Report demonstrating compliance with MIL-STD 1916 and contractual quality assurance provisions. Delivery timelines vary based on whether the First Article Test is conducted or waived, and shipments are to be distributed among specified government depots. Contract performance and administration integrate stringent cybersecurity clauses, mandating controls per NIST SP 800-171 to protect controlled unclassified information, and invoicing is managed electronically via Wide Area WorkFlow (WAWF). Award selection employs a best-value trade-off methodology incorporating price, delivery, and compliance considerations. Key contacts at DLA Land Warren are provided to support vendor inquiries and assistance, with additional resources for government contracting support through regional APEX Accelerators.

General Info

DLA seeks suppliers for firm-fixed-price hydraulic manifolds, strict compliance, sealed bids due November 2025.

Agency

Department Of Defense → DLA Land Warren

NAICS

332912 - Fluid Power Valve and Hose Fitting Manufacturing

Place of Performance

MI, USA

Set-Aside

NONE

Documents

Amendment 0001 to Solicitation SPRDL1-25-R-0202

4 pages · amendment

High

Solicitation SPRDL1-25-R-0202 Sealed Bid IFB

ifb

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJun 5

Presolicitation

Response DeadlineJul 23

Deadline has passed

Type ChangedOct 23

Presolicitation → Solicitation

Submission Closed

07/23/2025, 08:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DLA Land Warren

Contacts2 people available

OfficeWARREN, MI, 48397, USA

Organization / AgencyDepartment Of Defense → DLA Land Warren

Office AddressWARREN, MI, 48397, USA

Contacts

Graham Weaver

Muhammad Kah

Full Description

TYPE: SOLICITATION

TITLE (NOUN): MANIFOLD ASSEMBLY, HYDRAULIC

NOTICE ID (SOLICITATION NO.): SPRDL1-25-R-0202

PSC: 4730

NAICS: 332912

RESPONSE DATE: 23 JUL 2025

INACTIVE DATE: 31 DEC 2025

THIS IS A SOLICITATION NOTICE.

DLA Land Warren has the following requirement -

NSN: 4730-01-518-9033 Part Number: 12438346-2 (01417) Basic Quantity: 4 Each. Option Quantity: Up to 4 Each. FOB Point: Destination. Packaging: MIL B. Type Award: Firm-Fixed-Price.

If interested in this acquisition effort, be sure to “FOLLOW” this notice and add your company information to the “Interested Vendors List.”

The Technical Date Package (TDP) is considered competitive with purchase parts and is Export Controlled (see below).

Please note: ONLY the Data Custodian, as identified in the United States/Canada Joint Certification Program (JCP) will be granted approval to download the Technical Data Package (TDP) –- No Exceptions.

EXPORT CONTROLLED

Joint Certification Program (EXPORT CONTROL)

You must be certified under the United States/Canada Joint Certification Program (JCP) (https://www.dlis.dla.mil/jcp/) to be granted access to the Technical Data Package (TDP) for this solicitation, via the Contract Opportunities section of SAM.gov. To register, or to re-register, please select the DD Form 2345 link from the Joint Certification Program (JCP) Home page ((https://www.dlis.dla.mil/jcp/) and follow the instructions for completion, noting the required documentation to submit with the form. Mail the Form 2345, along with the required documentation to the address provided on form; it CANNOT be faxed or emailed. The process should take no more than one week for you to be certified or denied for approval under the JCP. If you encounter problems, please contact JCP at +1 (555) 000-0000 or via email at contact@example.gov. Your firm must request access to the TDP as outlined in the narrative entitled, “Technical Data Package Information (Contract Opportunities in SAM.gov) Version” in the solicitation.

REVERSE AUCTION

The solicitation will contain a provision entitled, “Reverse Auction,” which allows for the use of a reverse auction as a pricing technique. After the solicitation closes, the contracting officer will determine if a reverse auction will be held. If a reverse auction is held, contractors must be registered in the reverse auction system in order to participate in the auction. Additionally, the contractor representative participating in the auction must have taken the on-line reverse auction training prior to the auction. Registration, on-line training, and other information regarding the reverse auction can be found at https://dla.procurexinc.com. Any questions related to the reverse auction system or process can be directed to the Contract Specialist.

Need Government Contracting Assistance

Contact your APEX Accelerator:

To locate an APEX Accelerator within Michigan, please visit www.ptacsofmichigan.org

To contact an APEX Accelerator outside of Michigan, please visit www.aptac-us.org/contracting-assistance or www.apexaccelerators.us