Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

MANIFOLD, INTAKE

Active
SPE7L4-26-T-5471Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of an air intake manifold specifically for use on General Motors 6.2 liter diesel engines, identified by part numbers 5740057 from AM General LLC and 23500035 from General Motors LLC. The item is classified as a critical application item with a National Stock Number of 2815-01-168-7909 and a unit of issue of each (EA). A total quantity of 257 units is required at a fixed unit price of $257.00, resulting in a total contract value of $66,049. The delivery schedule mandates shipment within 168 days from the contract award, with delivery terms set at FOB origin and a strict zero percent variance allowed on quantity. Inspection and acceptance occur at the destination, and all items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede other standards including ASTM D3951. Packaging and labeling must adhere to MIL-STD-129 and the DLA Packaging Requirements for Procurement (RP001), with palletization following specified guidelines. The use of Class I ozone depleting chemicals is strictly prohibited, and any substitute materials must be approved unless explicitly authorized. Items must be packaged in accordance with ASTM D3951 only if no conflicting DLA requirement exists. The delivery destination is DLA Distribution Red River, Building 499, in Texarkana, TX. The procurement is part of a total small business set-aside under NAICS code 333618, with solicitation issued under SPE7L4-26-T-5471, response deadline July 23, 2026, and posting date of July 20, 2026. The original required delivery date is May 9, 2027, with an alternative need date of January 5, 2027. All contractual obligations are governed by DLA’s technical and procurement directives, and deviations require formal engineering change proposals or variance requests.

General Info

Procurement of 257 intake manifolds by DLA under solicitation SPE7L4-26-T-5471, due July 20, 2026.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

333618 - Other Engine Equipment ManufacturingView NAICS

Place of Performance

10TH STREET AND K AVENUE, TEXARKANA, TX, 75507-5000, US

Set-Aside

SBA

Documents

(1)

SPE7L4-26-T-5471.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
View Agency Profile
Office AddressUS
Contacts
ANNA-RACHELLE BETTS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MANIFOLD,INTAKE
MANIFOLD, INTAKE, AIR.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
USED ON GENERAL MOTORS 6.2 LITER DIESEL ENGINE.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
CRITICAL APPLICATION ITEM
AM GENERAL LLC 34623 P/N 5740057
GENERAL MOTORS LLC 7X677 P/N 23500035
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017437893 0001 EA 257.000
NSN/MATERIAL:2815011687909
DELIVERY (IN DAYS):0168
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
SPE7L4-26-T-5471
SECTION B
PR: 7017437893 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3227
DLA DISTRIBUTION RED RIVER
RECEIVING BLDG 499
10TH STREET AND K AVENUE
TEXARKANA TX 75507-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3227
DLA DISTRIBUTION RED RIVER
RECEIVING BLDG 499
10TH STREET AND K AVENUE
TEXARKANA TX 75507-5000
US
Need Ship Date:01/05/2027 Original Required Delivery Date:05/09/2027
SPE7L4-26-T-5471 NSN/Part Number: 2815-01-168-7909 Quantity: 257 EA Purchase Request: 7017437893QTY: 257 Delivery: 168 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333618
New
DIBBS
Supply of Intake Air Cleaner (NSN: 2940016459359)The contract entails the procurement and delivery of a single military-specification intake air cleaner unit identified by NSN 2940016459359, manufactured and packaged to meet federal standards for packaging, labeling, and hazardous material handling. This item is classified under NAICS code 333618 and is being acquired as a subcontract through the Defense Logistics Agency, an agency within the Department of Defense, to support military operational readiness. The procurement is scheduled to be posted on July 20, 2026, and the place of performance and point of contact details are not specified, indicating the delivery location and coordination responsibilities may be determined post-award. The contract is linked to the DIBBS system under award number SPE7L126V123G, confirming its official status within the Department of Defense’s acquisition framework.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

N/A
View Details
NAICS: 333618
New
DIBBS
Origin-Inspected Component Supply (CLIN 0004)The contract involves the supply of a specialized component subject to origin inspection and formal acceptance at the prime contractor’s facility in Hauppauge, New York, adhering strictly to Defense Logistics Agency procurement standards. The component must be sourced and manufactured in compliance with defined origin requirements to ensure traceability and regulatory conformity, with final verification performed on-site by authorized personnel. This is structured as a subcontract under DLA procurement protocols, and the performance location is fixed at the prime contractor’s facility where inspections will be conducted, making physical presence and logistical coordination essential to successful delivery. The contract is identified under CLIN 0004 and falls under NAICS code 333618, indicating classification within the other engine equipment manufacturing sector, typically involving parts for defense or aerospace applications. The posting date of July 20, 2026, suggests this is a future award opportunity, pending full execution and fulfillment of all contractual conditions. The subcontract is governed by the DLA’s broader framework for defense logistics, emphasizing quality control, origin verification, and adherence to federal acquisition policies, with no set-aside designation applied. All activities must align with the official DIBBS award record linked to the contract for full compliance and audit readiness.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

N/A
View Details
NAICS: 333618
New
DIBBS
SPINDLE, SPRINGThe contract is for the procurement of 16 spindle, spring units with NSN 2910012909023 under solicitation SPE7L1-26-T-790R, issued by the Department of Defense's Land Supply Chain through DLA. The item must be delivered within 20 days of award to the destination address onboard USNS GUADALUPE T AO 200 at FPO AP 96666, with FOB destination terms applying, and no tolerance for quantity variance. The total contract value is $256.00, with a unit price of $16.00 per unit. Packaging must strictly adhere to MIL-STD-2073-1E, including preservation method 20, cleaning/drying code 1, preservation material 02, wrapping material GH, unit container BD, and packaging code U. All markings must comply with MIL-STD-129, with no special marking required, and palletization must follow DLA’s RP001 packaging requirements. Hazardous materials are subject to stringent controls: mercury and mercury-containing compounds are prohibited unless part of batteries, fluorescent lights, required instruments, sensors, controls, weapon systems, or chemical analysis reagents approved by NAVSEA, and portable mercury-containing devices must include shockproof design and a secondary containment per NAVSEA 5100-003D. Class I ozone-depleting chemicals are entirely banned. The item is designated as a covered defense information critical application, with cybersecurity and information safeguarding obligations enforced through DFARS clauses 252.204-7012 and 252.240-7997, requiring NIST SP 800-171 compliance and cyber incident reporting. Contractual compliance also includes prohibition of hexavalent chromium, avoidance of Communist Chinese military company items, export control adherence, and electronic submission of payment requests via WAWF. The contractor must comply with employment eligibility verification, anti-human trafficking requirements, and equal opportunity standards. Delivery must be via traceable freight, not parcel post, and payment is processed through Wide Area WorkFlow with no alternative invoicing methods accepted. All delivery, inspection, and acceptance occur at the destination under FAR 52.246-2, with no provision for pre-shipment inspection. Offerors must hold a valid UEI and CAGE code, and representations regarding
LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333618
New
DIBBS
PUMP, COOLING SYSTEMThe contract specifies the procurement of a cooling system pump with NSN 2930-01-663-4578 under solicitation SPE7L1-26-T-806Y, a total small business set-aside for NAICS code 333618, with a requirement for delivery within five days of order placement. Two line items are listed, each for one unit, with identical technical specifications and delivery instructions, both FOB origin and subject to zero percent quantity variance. Inspection and acceptance occur at the destination, with packaging required to comply with MIL-STD-2073-1E and marking following MIL-STD-129, including specific preservation methods, container types, and packaging codes. Palletization must meet DLA packaging standards, and shipments must be sent via traceable freight, excluding parcel post. The delivery address and mark-for location are identical, corresponding to a U.S. Army unit at Fort Riley, Kansas. Technical and quality requirements are governed by the DLA Master List, and all units must be delivered by the specified original deadline of either February 24, 2026, or May 27, 2026, depending on the line item. Government use codes and tracking identifiers are included for logistics and accountability purposes.
LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333618
New
DIBBS
CYLINDER HEAD, DIESEThe contract specifies the procurement of a diesel engine cylinder head, part number 5102770 from Rolls-Royce Solutions America Inc, with NSN 2815-01-121-2952, intended for use in Detroit Diesel Allison Division engines, specifically the inline 6-cylinder Model 71 and V-12 Model V-71. The item is classified as a critical application component, with strict compliance requirements including adherence to DLA Packaging Requirements and technical quality standards referenced through R and I numbers in the DLA Master List of Technical and Quality Requirements. Mercury or mercury-containing compounds are prohibited from intentional addition or direct contact with the hardware, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specific chemical reagents designated by NAVSEA; any portable devices containing mercury must be shockproof with a secondary containment barrier compliant with NAVSEA 5100-003D. The item must be packaged per MIL-STD-2073-1E with specified materials and methods, marked in accordance with MIL-STD-129, and palletized per RP001 guidelines. Delivery is FOB origin, with a required delivery date of February 3, 2027, and a ship date of January 5, 2027, within a 168-day window. One unit is ordered under purchase request 7017439635, with zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and transportation logistics are governed by DLAD Proc Notes C19 and C20, with delivery directed to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581. The solicitation was issued under SPE7L5-26-T-4383 with a response deadline of July 23, 2026, and is managed by the Department of Defense’s Land Supplier Operations Engines organization.
LAND SUPPLIER OPNS ENGINES

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333618
New
DIBBS
CYLINDER, ENGINE, DIEThis contract specifies the procurement of a diesel engine cylinder, identified by NSN 2815-01-699-9381 and part number 064409 from SAUER COMPRESSORS USA, INC., with a total quantity of seven units. The delivery must be completed within 168 days under FOB origin terms, with no variance allowed in quantity, and inspection and acceptance occur at the destination. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951, and packaging must conform to MIL-STD-129 and RP001 DLA Packaging Requirements. The use of Class I ozone-depleting chemicals is strictly prohibited, and mercury or mercury-containing compounds are banned unless explicitly exempted for functional components like batteries, fluorescent lights, or naval instruments, in which case secondary containment and shock-proofing are mandatory per NAVSEA 5100-003D. The item is designated as a critical application item, requiring strict adherence to technical specifications. The delivery destination is the DLA Distribution Center in New Cumberland, Pennsylvania, with a required ship date of January 5, 2027, following an original delivery deadline of January 1, 2027. All unit of issue and packaging dimensions must align with the DLA-approved specifications, and transportation logistics are governed by DLAD Proc Notes C19 and C20. The solicitation was issued on July 20, 2026, with a response deadline of July 23, 2026, under contract number SPE7L5-26-T-4425.
LAND SUPPLIER OPNS ENGINES

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333618
New
DIBBS
CLUTCH, FAN, ENGINEThe contract pertains to the procurement of a clutch, fan, and engine assembly identified by NSN 2930014730595 with a total quantity of 59 units, delivered in two separate lots of three and fifty-six units respectively. Delivery is required within 71 days of the need ship dates, with the first shipment due by June 9, 2026, and the second by September 30, 2026, though the original delivery deadline is set for December 31, 2026. All items must be furnished FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, including specific methods for preservation, wrapping, cushioning, and unit containment, with marking adhering to MIL-STD-129 and no special marking codes applied. Palletization must conform to DLA standards. The contract prohibits the intentional use of mercury or mercury-containing compounds in the hardware except for specific exempted applications such as batteries, fluorescent lamps, sensors, or weapons systems, with portable mercury-containing devices requiring shockproof design and secondary containment as per NAVSEA 5100-003D. The items are to be shipped to two DLA distribution centers—one in Barstow, California, and one in New Cumberland, Pennsylvania—with transportation governed by DLA procedural notes C19 and C20. The solicitation number is SPE7L5-26-T-4529, issued under DLA’s authorized unit of issue system, with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. The procurement is managed by the Department of Defense’s Land Supplier Ops Engines under NAICS code 333618, with Paul Doerfler designated as the primary point of contact.
LAND SUPPLIER OPNS ENGINES

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333618
New
DIBBS
SPRAY TIP, NOZZLE, NOThis contract specifies the procurement of spray tips and nozzles for fuel injectors used on Detroit Diesel Series 71 engines, identified by NSN 2910-00-119-8494 and part number 5229192. The requirement is for 552 packing groups, with each packing group containing two units, totaling 1,104 individual components. The contract is issued under solicitation SPE7L5-26-T-4344 as a total small business set-aside, with delivery due in 147 days from the award date, FOB origin, and inspection and acceptance occurring at the destination warehouse in Tracy, California. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, explicitly prohibiting plastic packaging materials and mandating adherence to MIL-STD-129 for marking. All items must be free of intentional mercury or mercury compounds, with exceptions only for specific functional applications like batteries or instruments as defined by NAVSEA, and all preservation and packaging methods must also exclude mercury. The contract allows no variance in quantity—exact delivery of 552 packing groups is required. Approved suppliers include Interstate Diesel Service Inc., Hatch & Kirk Inc., General Motors LLC, and Rolls-Royce Solutions America Inc., all producing the same part number under their respective vendor codes. The delivery must be completed by December 15, 2026, with the original required delivery date of November 19, 2026. All transportation requirements follow DLA procedural notes C19 and C20, and the point of contact is Paul Doerfler at the Department of Defense.
LAND SUPPLIER OPNS ENGINES

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333618
New
DIBBS
MUFFLER, EXHAUSTThe contract solicits 45 mufflers for exhaust systems under NSN 2990-01-691-5058, with a delivery requirement of 155 days after contract award. The solicitation number is SPE7LX-26-T-0794, issued as a total small business set-aside under FAR 19.5, and is governed by the NAICS code 333618. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. Technical data associated with this item is subject to export control under DFARS 252.225-7048, requiring offerors and their suppliers to be pre-approved by DLA J34; unapproved sources will not delay award. The place of performance is Tracy, California, with Kalyn Danneberger listed as the primary point of contact. The opportunity closed for responses on July 23, 2026, and was posted on July 20, 2026, through the DIBBS platform.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333618
New
DIBBS
MANIFOLD, EXHAUSTThe contract is for the procurement of 21 units of a MANIFOLD, EXHAUST with NSN 2815-00-388-9992 under solicitation SPE7L5-26-T-4528, with a delivery requirement of 157 days after award. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The item is subject to stringent export controls under ITAR or EAR, restricting disclosure of associated technical data to foreign persons even within the U.S., and requires contractors to possess a valid US/Canada Joint Certification Program certification, complete required DOD export control training and questionnaire, and receive DLA approval to access controlled information. Cybersecurity compliance mandates CMMC Level 2 certification for third-party assessors and adherence to Covered Defense Information protocols. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials must be pre-approved unless already permitted by the specifications. Removal of government identification from non-accepted supplies is required, and packaging must comply with DLA standards. The place of performance is Anniston, Alabama, 36201-4199, and the primary point of contact is Paul Doerfler, reachable via email and phone provided. The contract falls under NAICS code 333618 and is administered by the Department of Defense through the Land Supplier Operations Engines organization.
LAND SUPPLIER OPNS ENGINES

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333618
New
DIBBS
LEVER ASSEMBLY, OPERThe contract pertains to the procurement of a lever assembly, operating part with NSN 2910-00-871-5429, sourced from AMBAC INTERNATIONAL CORPORATION under part number LE9093A. It is a total small business set-aside solicitation under NAICS code 333618, issued by the Department of Defense’s Land Supply Chain, with a response deadline of July 23, 2026, and a required delivery date of December 1, 2026, within a 91-day timeframe. The item is classified as a critical application item and must comply with DLA packaging requirements referencing MIL-STD-2073-1E and MIL-STD-129 for marking and palletization; no special marking is required. The unit of issue is each, with a quantity of 80 units priced at $80.00 per unit, totaling $6,400.00, delivered FOB origin with zero variance allowance. Inspection and acceptance occur at destination, and the government does not provide casting or forging tooling, requiring vendors to obtain necessary materials or support through DLA’s Casting and Forging Assistance Request system if needed. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document, and packaging and transportation follow DLA procedural notes C19 and C20. Delivery is directed to DLA Distribution Anniston at 7 Frankford Ave, Building 362, Anniston, AL 36201-4199.
LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333618
New
DIBBS
MANIFOLD, EXHAUSTThe contract specifies the procurement of a manifold for engine exhaust, identified by NSN 2815-00-388-9988 and part number 11683987 from FLEXIBLE METAL, INC., with a quantity of 31 units. The unit price is $31.00 per unit, resulting in a total price of $961.00. Delivery is required within 168 days under FOB origin terms with no variance allowed in quantity. Inspection and acceptance occur at the destination location. Packaging must comply with MIL-STD-2073-1E, with specific methods including preservation type AE, drying method CLNG/DRY, and packaging code U, all marked per MIL-STD-129. The item must be palletized per DLA packaging requirements and delivered to the DLA Distribution facility at New Cumberland, Pennsylvania. The solicitation, issued under SPE7L1-26-T-809D, is a total small business set-aside with a NAICS code of 333618 and was posted for response by July 23, 2026. All technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date controls. The need ship date is January 5, 2027, with an original required delivery date of March 30, 2027. Transportation and shipping instructions align with DLAD procedural notes C19 and C20.
LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

NAICS: 484220
New
DIBBS
Domestic Freight & Delivery LogisticsThe contract requires the transportation and final delivery of packaged bevel gears from the manufacturer to Fort Stewart, Georgia, with strict compliance to tracking and chain-of-custody documentation throughout the entire logistics process. The shipment must be handled with precision to ensure accountability, security, and timely arrival at the designated military installation, as failure to maintain proper documentation could result in non-compliance. The NAICS code 484220 indicates this is a specialized motor freight transportation service, emphasizing the need for experienced carriers familiar with defense-related shipments and secure logistics protocols. This subcontract, issued under the Department of Defense via LSO Combat Vehicles and Armament, has a narrow response window, with submissions due by July 23, 2026, following a posting date of July 20, 2026. The place of performance is clearly defined as Fort Stewart, GA, with the zip code 31314-0000, and the contract requires full visibility of the shipment from origin to destination. While no specific point of contact is listed, all bidders must adhere to the DIBBS platform requirements and ensure their proposals meet the stringent documentation and delivery standards expected for defense logistics operations.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 561990
New
DIBBS
Packaging, Labeling & Compliance ServicesThe contract requires full compliance with MIL-STD-129 standards for the packaging and labeling of a bevel gear, ensuring that all components are properly identified, documented, and secured for military logistics and handling. This includes adherence to hazard communication protocols and preservation methods to protect the gear from corrosion, damage, and environmental degradation during storage and transit. All packaging materials and labeling must meet exacting military specifications to guarantee traceability, readiness, and operational suitability upon arrival at the designated location. Performance is mandated at Fort Stewart, Georgia, with a strict deadline for response on July 23, 2026, and the solicitation falls under the NAICS code 561990 for other support services. The contract is structured as a subcontract within the Department of Defense's Combat Vehicles and Armament program, emphasizing the critical nature of the component and the need for precise, certified handling. The deliverable is not merely physical packaging but a fully compliant system integrating labeling, hazard documentation, and preservation to support defense supply chain integrity.
All Other Support Services

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332996
New
DIBBS
Precision Gear ManufacturingThe contract mandates the manufacturing of a single precision bevel gear to meet stringent military or industrial standards, encompassing the full production lifecycle from material selection through final certification. The gear must be fabricated using controlled processes including CNC machining for dimensional accuracy, followed by appropriate heat treatment to ensure mechanical integrity and durability under operational stress. Comprehensive inspection protocols are required to verify compliance with technical specifications, and formal certification documentation must accompany delivery to confirm adherence to applicable standards. All work is to be performed in accordance with the NAICS code 332996, which pertains to other fabricated metal product manufacturing, and must be completed at the designated place of performance in Fort Stewart, Georgia, with a response deadline of July 23, 2026. The contract is solicited as a subcontract under the Department of Defense, specifically through LSO Combat Vehicles and Armament, and is intended to support defense-related equipment needs.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 312230
New
DIBBS
Hazardous Materials Packaging & Labeling ComplianceThe contract requires comprehensive packaging, labeling, and safety documentation services for hazardous materials in strict compliance with federal and Department of Defense standards, including MIL-STD-129, ASTM D3951, and OSHA’s Hazard Communication Standard. All activities must encompass palletization, accurate hazard labeling, and timely submission of Safety Data Sheets to ensure regulatory adherence across all phases of material handling and transportation. The work is essential to maintaining safety and operational readiness for defense-related logistics. Performance is designated for Barstow, California, with a ZIP code of 92311-5015, and the contract is classified as a subcontract under NAICS code 312230. The solicitation was posted on July 20, 2026, with a firm response deadline of July 31, 2026. The contracting entity is the Department of Defense, specifically under LSO Combat Vehicles and Armament, indicating the materials involved are critical to military vehicle and weapon systems operations. Compliance with all required standards is non-negotiable, and failure to meet documentation or labeling requirements could result in rejection or non-performance penalties.
Tobacco Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Freight Shipping (FOB Origin)The contract requires the arrangement and timely execution of shipment for a packaged component from the manufacturer to a carrier within five days of contract award, adhering strictly to FOB ORIGIN terms, which place responsibility for transportation and risk on the buyer once the goods leave the seller’s location. The procurement is categorized under NAICS code 484220, indicating it pertains to truck transportation of freight, and is structured as a subcontract under the Department of Defense’s LSO Combat Vehicles and Armament office, with performance location specified in Barstow, California, 92311-5015. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, and is accessible via the DIBBS portal for interested parties to submit proposals.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Safety Data ManagementThe contract requires identification of hazardous materials and the generation of OSHA-compliant Safety Data Sheets in accordance with 29 CFR 1910.1200(g) and Federal Standard No. 313, ensuring proper documentation of chemical hazards. It also mandates the creation and application of accurate hazard warning labels that meet federal regulatory requirements for workplace safety. The work must be performed to support the Department of Defense’s LSO Combat Vehicles and Armament division, with performance localized to Barstow, California, ZIP code 92311-5015. This is a subcontract under NAICS code 541690, with a submission deadline of July 31, 2026, and the solicitation was posted on July 20, 2026. All deliverables must reflect strict adherence to federal standards for hazard communication and material safety compliance.
Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging and Preservation ServicesThe contract requires the provision of packaging, preservation, and labeling services for military components in strict compliance with MIL-STD-2073-1E and DLA RP001 standards, ensuring the use of approved materials and container types to maintain component integrity during storage and transit. All work must adhere to the detailed technical specifications outlined in these military directives to guarantee long-term preservation and readiness for deployment under demanding environmental conditions. The service is issued as a subcontract under the NAICS code 561910, with performance required at Barstow, California, with a ZIP code of 92311-5015. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026. The contracting activity is under the Department of Defense, specifically the LSO Combat Vehicles and Armament organization, indicating the components are critical to military vehicle and weapon systems. Participation is restricted to subcontractors capable of meeting rigorous government packaging and preservation requirements with full traceability and documentation.
Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
Precision Manufacturing of Defense Vehicle ComponentA single unit of a LATCH, DOOR, VEHICULA with NSN 2540-01-662-1865 is being manufactured to exact military specifications covering material composition, dimensional tolerances, and performance criteria. The work must adhere strictly to defense standards to ensure compatibility and reliability in combat vehicle applications. This subcontract opportunity is issued under NAICS code 332999 and requires full compliance with all technical and quality assurance requirements outlined for military-grade components. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026. The place of performance is designated as Barstow, California, with ZIP code 92311-5015. The contract is managed under the LSO COMBAT VEHICLES AND ARMAMENT division of the Department of Defense. Interested parties must submit proposals through the official DIBBS portal prior to the deadline to be considered for award.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 484121
New
DIBBS
Transportation and Shipment Logistics ServicesThe contract seeks a subcontractor to manage the end-to-end transportation and shipment of goods from origin to government-designated destinations under strict military shipping standards. All logistics must include automated tracking throughout the journey to ensure complete visibility and accountability in compliance with Department of Defense requirements. Performance is specifically tied to the location of Barstow, California, with the zip code 92311-5015 designated as the primary place of performance. The solicitation falls under NAICS code 484121, which categorizes it as surface transit freight transportation services, and it was posted on July 20, 2026, with a response deadline of July 31, 2026. The contracting entity is the LSO Combat Vehicles and Armament division within the Department of Defense, indicating the nature of cargo will likely involve military equipment and armaments requiring secure, reliable, and regulated transit protocols.
General Freight Trucking, Long-Distance, Truckload

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Radioactive Materials Handling and Labeling (If Applicable)This contract pertains to the specialized labeling, classification, and documentation of radioactive materials in shipments, strictly aligned with updated MIL-STD-129 and applicable nuclear regulatory standards. The work involves ensuring all radioactive cargo is accurately identified, properly classified according to federal and military guidelines, and accompanied by complete, compliant documentation to support safe transport and handling throughout the supply chain. Compliance with these rigorous standards is mandatory to meet Department of Defense safety and operational requirements. The contract is structured as a subcontract under NAICS code 541690, with a solicitation response deadline of July 31, 2026, and was posted on July 20, 2026. Performance is required at Barstow, California, ZIP 92311-5015, under the oversight of the LSO Combat Vehicles and Armament office within the Department of Defense. The scope demands precise adherence to current military and nuclear regulations, with no flexibility in labeling protocols or documentation formats, and success will depend on demonstrable expertise in hazardous materials handling, regulatory compliance, and quality-controlled documentation processes.
Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Labeling ServicesThe contract seeks services to ensure full hazard communication compliance for hazardous materials included in supplied goods, encompassing the preparation of safety data sheets, accurate hazard labeling, and all necessary regulatory documentation. The contractor must align with applicable standards to support safe handling, storage, and transportation of hazardous substances throughout the supply chain. This subcontract is focused on delivering consistent, auditable, and compliant hazard communication practices tailored to the needs of the Department of Defense. Performance of this work is required at BARSTOW, CA, with a response deadline of July 31, 2026. The North American Industry Classification System code is 541690, indicating professional, scientific, and technical services related to environmental safety and regulatory compliance. The solicitation is issued under the LSO Combat Vehicles and Armament office, reflecting the defense sector’s critical need for precise and legally compliant hazard management in equipment and material logistics. All deliverables must meet federal requirements without exception, and the contractor is expected to maintain rigorous documentation and ongoing regulatory adherence.
Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336340
New
DIBBS
Procurement and Supply of Vehicle Sun Visors (NSN: 2540016525840)The contract pertains to the supply, packaging, labeling, and delivery of vehicle sun visors identified by NSN 2540016525840, with strict adherence to military standards for marking, barcoding, and logistics tracking to ensure full compliance with DoD operational requirements. All items must be manufactured and packaged to meet specified technical and procedural guidelines to support seamless integration into military vehicle systems and supply chains. The procurement is classified as a subcontract under NAICS code 336340, indicating it falls within the motor vehicle parts manufacturing sector, and is being managed by the LSO Combat Vehicles and Armament office under the Department of Defense. Performance of the contract is required at the designated location in Barstow, California, with zip code 92311-5015, and all deliveries must be completed in alignment with military logistics protocols. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026, providing a narrow window for qualified subcontractors to submit proposals. There is no set-aside designation specified, meaning the contract is open to all eligible vendors regardless of size or status. While no point of contact is listed, all inquiries and submissions must be processed through the official DIBBS portal linked in the documentation. The focus remains on delivering high-quality, standardized sun visors that meet exacting military specifications, ensuring reliability, traceability, and readiness for deployment across combat vehicle fleets.
Motor Vehicle Brake System Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details