Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Manufacture and Supply of Close Tolerance Screws (NAS7103-8)

Active

Federal

Response Deadline09/22/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of 286 precision-engineered close tolerance screws, specifically NSN 5305014358742, for prime contractors supporting DLA Aviation supply contracts. The items must be produced to NAS7103-8 standards, ensuring 3A and 3B thread dimensional conformance in accordance with FFD-STD-H28/20 System 22. The project requires the use of precision threading and inspection equipment to meet strict technical specifications. All items must undergo bare item marking per MIL-STD-130N and be packaged according to ASTM D3951. This requirement is managed by the ASC Commodities Division of the Department of Defense, with performance taking place in New Cumberland, Pennsylvania.

General Info

Manufacture and supply 286 precision screws meeting NAS7103-8 standards for DLA Aviation.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-29JM.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SCREW, CLOSE TOLERANCE

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 14

subcontract

Response DeadlineSep 22

Submission deadline

Response Deadline

09/22/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies precision-engineered close tolerance screws for prime contractors delivering DLA Aviation supply contracts. Manufactures screws to NAS7103-8 standards, ensuring 3A and 3B thread dimensional conformance per FFD-STD-H28/20 System 22. Performs bare item marking per MIL-STD-130N and packages items per ASTM D3951. Requires precision threading and inspection equipment. Delivers 286 units of NSN 5305014358742.

Similar Contracts

Same NAICS industry code

Retaining Spring Supplier (NSN 5360-01-128-5490)This subcontract involves the manufacture or sourcing of 2,109 retaining springs under NSN 5360-01-128-5490 for prime contractors working on DLA Land and Maritime fluid handling projects. The selected supplier must possess a valid CAGE code and the necessary testing equipment to perform Contractor First Article Testing in accordance with FAR 52.209-3. All deliverables must adhere to MIL-STD-129 packaging and marking requirements. The project is managed by the Department of Defense Fluid Handling Division, with the place of performance located in Greensboro, North Carolina. The contract requires the successful delivery of all 2,109 units following a validated First Article Test. Interested parties must respond by September 25, 2026.

FLUID HANDLING DIVISION

POSTED

about 9 hours ago

DEADLINE

Supply of Union Nuts (NSN 4730016012706)This subcontract involves the supply of 16 precision-manufactured union nuts for prime contractors supporting the Department of Defense Nuclear Reactor Program. The components must be produced using CRES 316 stainless steel in strict accordance with TDP Rev A Gen 2 and Basic Drawing NR 80064 1385884, Revision N. Quality assurance is maintained through zero-based sampling plans that comply with MIL-STD-1916 or ASQ H1331. The agreement requires full compliance with DFARS 252.204-7012 and DFARS 252.223-7008 regulations. Performance of the contract is centered in New Cumberland, Pennsylvania, under NAICS code 332722. The solicitation was posted on September 14, 2026, with a response deadline of September 25, 2026.

NUCLEAR REACTOR PROGRAM

POSTED

about 9 hours ago

DEADLINE

Manufacturing of Straight Headed PinsThis subcontract involves the manufacturing of precision-machined straight headed pins for prime contractors supporting the Department of Defense, specifically the ASC Supplier Oper AE and AF Div. The scope of work requires CNC machining and fabrication to meet strict technical and quality standards identified by R or I numbers, with a specific prohibition against the use of additive manufacturing. The project is based in New Cumberland, Pennsylvania, under NAICS code 332722. Interested parties must respond by September 22, 2026, to provide finished hardware that adheres to all specified technical requirements.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

Supply of Bolts (NSN 5306-00-5826419 / Part AN178-23A)This subcontract through the ASC Commodities Division of the Department of Defense involves the manufacture or procurement of 22 specialized bolts, identified as NSN 5306-00-5826419 and Part AN178-23A. The items must be produced according to FED-STD-H28/20 System 22 and TDP Rev C Gen 3, with inspections conducted per MIL-STD-1916 or ASQ H1331. Performance takes place at Fort Campbell, and the contract requires strict adherence to DFARS 252.225-7001 and MIL-HDBK-57 symbol registration. All units must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129. The opportunity was posted on September 14, 2026, with a response deadline of September 22, 2026. This procurement falls under NAICS code 332722 and is intended for prime contractors supporting Defense Logistics Agency supply contracts.

ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Supply of Self-Locking Spline NutsThis subcontract through the ASC Commodities Division of the Department of Defense involves the supply of self-locking spline nuts for prime contractors fulfilling DLA supply contracts. The provider is responsible for manufacturing or sourcing these components in strict accordance with the DLA Master List of Technical and Quality Requirements. Key operational requirements include performing physical identification and bare item marking per RQ017 and adhering to the DLA Packaging Requirements for Procurement under RP001. The contract focuses on the delivery of marked and packaged quantities of these specific nuts under NAICS code 332722, with a response deadline of September 22, 2026.

ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Supply of Machine Screws (NSN 5305015878077)This subcontract with the Defense Logistics Agency involves the manufacture and supply of machine screws meeting NSN 5305015878077 and RA001 technical specifications. The provider is responsible for delivering hardware that adheres to MIL-STD-129 marking standards and ensures all preservation and packaging are mercury-free in accordance with IP056. The contract falls under NAICS code 332722 and requires the delivery of physical machine screws as detailed in the specific contract CLINs. The solicitation was posted on September 14, 2026, with a response deadline of September 22, 2026.

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

Supply of Machine Bolts (NSN 5306016245057)This subcontract through the ASC Commodities Division of the Department of Defense involves the supply of machine bolts meeting NSN 5306016245057 specifications for prime contractors on Defense Logistics Agency hardware procurements. The provider is responsible for manufacturing or sourcing the bolts and ensuring strict adherence to RP001 DLA Packaging Requirements, including the necessary disclosure of any non-domestic materials used in production. The contract falls under NAICS code 332722 and specifies New Cumberland as the place of performance. Interested parties must respond by September 22, 2026, to meet the requirements for delivering packaged machine bolts according to the established federal standards.

ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Supply of Close Tolerance Screws (NSN 5305-01-074-6843)This subcontract with the ASC Commodities Division of the Department of Defense involves the manufacture and supply of precision-engineered close tolerance screws meeting NSN 5305-01-074-6843 specifications. The contractor is responsible for utilizing precision machining equipment to produce or source the components, performing Quality Conformance Inspection according to RQ006, and ensuring all packaging and marking adhere to DLA RP001 and C14 standards for delivery to the designated government facility. The opportunity is categorized under NAICS code 332722 and is designated as a Total Small Business Set-Aside per FAR 19.5. Interested parties must respond by September 18, 2026, following the posting date of September 14, 2026.

ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Supply of Self-Locking Barrel Nuts (NSN 5310010557765)This subcontract involves the procurement or manufacture of 31 self-locking barrel nuts, identified by NSN 5310010557765, for prime contractors supporting DLA Aviation supply contracts. These components are designated as Critical Application Items, requiring strict adherence to the DLA Master List of Technical and Quality Requirements. The contractor is responsible for performing rigorous quality control inspections to ensure the parts do not fail within critical aviation systems. This requirement is managed under NAICS code 332722 for the Department of Defense, specifically within the Aviation Supply Chain ESOC Buys agency.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 9 hours ago

DEADLINE

Supplier of Critical Application Shoulder Bolts (NAS1297-4D15)This subcontract involves the supply of 15 specialized aerospace shoulder bolts, specifically part number NAS1297-4D15 and NSN 5306010384745, to support prime contractors delivering DLA supply contracts. The selected supplier is responsible for manufacturing or sourcing these critical application hardware components and providing a certification of conformance to ensure quality and safety standards are met. The contract requires strict adherence to military and industry standards, including packaging per ASTM D3951 and marking and labeling per MIL-STD-129. Issued by the ASC Commodities Division of the Department of Defense, the performance of this contract is centered in Beltsville, with a response deadline of September 22, 2026.

ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Supply of Fasteners (Screws)This subcontract involves the procurement and delivery of 3,158 units of industrial screws, identified by NSN 5305-00-926-1826, to support prime contractors fulfilling DLA supply contracts. The agreement specifies that all items must be marked according to MIL-STD-129 and shipped under FOB Origin terms. The contract is managed by the Department of Defense through the ASC Commodities Division, with the place of performance located in Texarkana, Texas. Operating under NAICS code 332722, the solicitation was posted on September 14, 2026, with a response deadline of September 22, 2026.

ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Supply of Plain Round Nuts (NSN 5310-01-542-5929)This subcontract, issued by the Department of Defense ASC Commodities Division, requires the supply of 30 units of plain round nuts identified by NSN 5310-01-542-5929 for prime contractors fulfilling DLA supply contracts. The contract is designated as a Total Small Business Set-Aside under NAICS code 332722, with a response deadline of September 29, 2026. The supplier must adhere to strict technical specifications for packaging and logistics, including ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 DLA Packaging Requirements for palletization. All deliverables must meet these standardized military and industrial guidelines to ensure compliance with agency requirements.

ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Supply of Cotter Pins (NSN 5315016406621)This subcontract involves the manufacture or procurement of two cotter pins meeting NSN 5315016406621 specifications for prime contractors delivering to DLA Aviation. The work is managed by the Department of Defense under the ASC Commodities Division, with performance taking place in Havelock, North Carolina. The contractor is responsible for ensuring all items meet quality control standards per FAR 52.246-1 and adhere to RP001 DLA Packaging Requirements for Procurement. Final delivery of the units will be handled via Government-Arranged Transportation.

Hardware Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of PIN-RIVET (NSN 5320010562209)This subcontract with the Department of Defense ASC Commodities Division involves the manufacture or sourcing of 1,991 PIN-RIVET units meeting NSN 5320010562209 specifications. The contractor is responsible for delivering these components to prime contractors, ensuring all items are packaged according to RP001 and marked per RQ017 and RQ011 standards to meet DLA requirements. The project falls under NAICS code 332510 and is to be performed at Hill AFB. The solicitation was posted on September 14, 2026, with a response deadline of September 22, 2026.

Hardware Manufacturing

POSTED

about 9 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services, issued by the Department of Defense ASC Commodities Division, requires the specialized packaging, marking, and palletization of items for prime contractors on DLA supply contracts. The service provider must ensure all work adheres to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 and DLA requirements for palletization. Key technical requirements include the application of Hazard Warning Labels according to 29 CFR 1910.1200 and the use of UV-protective packaging for items under FSC 5330 and 5331. The final deliverable is a fully packaged, marked, and palletized shipment. This opportunity falls under NAICS code 561910, with a response deadline of September 22, 2026.

Packaging and Labeling Services

POSTED

about 9 hours ago

DEADLINE

Supply of Northrop Grumman P/N 156C604H01This subcontract through the Department of Defense ASC Commodities Division involves the supply of one unit of Northrop Grumman Systems Corporation part number 156C604H01 for prime contractors on DLA supply contracts. The part must be manufactured or sourced according to TDP Rev A Gen 1 and Federal Supply Classifications 5330/5331, with delivery terms set as FOB Origin. The contractor is required to adhere to strict quality and identification standards, including physical identification and bare item marking per RQ017 and inspection according to MIL-STD-1916 or MIL-STD-105/ASQ Z1. Additionally, the delivery must comply with MIL-STD-129. The opportunity falls under NAICS code 336413, with a response deadline of September 22, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Straight Headed Pins (NSN 5315009570757)This subcontract with the Department of Defense ASC Commodities Division involves the supply of 59 units of straight headed pins meeting NSN 5315009570757 specifications. The contractor is responsible for manufacturing or sourcing the pins and ensuring all deliverables adhere to strict quality and logistics standards, including packaging per ASTM D3951, marking and labeling per MIL-STD-129, and palletization according to RP001. The project falls under NAICS code 332510 and is to be performed in New Cumberland, Pennsylvania. Interested parties must respond by September 22, 2026, following the solicitation posted on September 14, 2026.

Hardware Manufacturing

POSTED

about 9 hours ago

DEADLINE

First Article Test (FAT) Validation ServicesThis subcontract for First Article Test (FAT) Validation Services supports prime contractors on DLA and US Air Force aerospace hardware contracts. The selected provider will produce three initial test units and coordinate validation testing at Tinker AFB to verify that all components adhere to necessary technical specifications and safety requirements. The project concludes with the delivery of the three first article units and a comprehensive test validation report. This opportunity is managed by the ASC Commodities Division within the Department of Defense under NAICS code 541380, with a response deadline of September 22, 2026.

Testing Laboratories and Services

POSTED

about 9 hours ago

DEADLINE

Supply of NSN 5325-01-172-6971 (Critical Safety Item)This subcontract through the ASC Commodities Division of the Department of Defense involves the supply of 150 units of hardware component NSN 5325-01-172-6971 for prime contractors on DLA and US Air Force supply contracts. The performance will take place at Tinker AFB. The contractor is responsible for manufacturing or procuring items according to military specifications, performing quality assurance for Critical Safety Items, and ensuring all packaging and hazardous material labeling comply with MIL-STD-2073-1E and 29 CFR 1910.1200. The opportunity was posted on September 14, 2026, with a response deadline of September 22, 2026. It falls under NAICS code 332994.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Quick Release Pins (NSN 5315-01-443-3129)This subcontract involves the supply of quick-release pins under NSN 5315-01-443-3129 for the Department of Defense, specifically the ASC Commodities Division. The contractor is responsible for manufacturing or sourcing pins that strictly adhere to NASM17984 Revision 3 and NAS1332 Revision 9 standards. Key operational requirements include performing rigorous quality control and ensuring all packaging and marking comply with MIL-STD-129. The selected provider must be capable of delivering certification of compliance with all specified NASM and NAS standards and delivering the final physical products to the government activity. Performance will take place in Tracy, California. The solicitation was posted on September 14, 2026, with a response deadline of September 22, 2026, under NAICS code 335129.

Other Lighting Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services involves providing military-grade packaging, marking, and palletization for prime contractors on DLA supply contracts. The service provider is responsible for executing palletization according to RP001, marking per MIL-STD-129, and packaging data per MIL-STD-2073-1E, utilizing MIL-SPEC pallets and cushioning to deliver cable assemblies ready for transit. The contract is managed by the ASC Commodities Division of the Department of Defense under NAICS code 488410. All properly packaged materials must be shipped via the fastest traceable means to the DMO at MCLB Albany, Georgia. The response deadline for this opportunity is September 22, 2026.

Motor Vehicle Towing

POSTED

about 9 hours ago

DEADLINE

Special Cable Assembly SupplierThis subcontract involves the manufacture and supply of two units of a specialized cable assembly, identified by NSN 5995-01-517-1519, for prime contractors under DLA supply contracts. The supplier is responsible for producing or sourcing the assembly in strict accordance with the provided technical data package, ensuring all wiring, connectors, and shielding meet specified requirements. The project is managed by the ASC Commodities Division of the Department of Defense and falls under NAICS code 334419. All deliverables must undergo quality inspection and maintain full compliance with MIL-STD-129 and MIL-STD-2073-1E standards. Performance of the contract is centered in Albany, with a response deadline of September 22, 2026.

Other Electronic Component Manufacturing

POSTED

about 9 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS