Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Manufacture and Supply of Electrical Connector Receptacles

Active

Federal

Response Deadline08/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the manufacture and delivery of electrical connector receptacles identified by NSN 5935-00-136-6380 and part number 9850366G004, with strict adherence to DLA Master List requirements, MIL-STD specifications, and all applicable environmental regulations. All delivered products must meet rigorous military standards for performance, durability, and compatibility under operational conditions. The work is structured as a subcontract under the MARITIME SUPPLY CHAIN division of the Department of Defense, with the North American Industry Classification System code 334417 indicating specialization in other electronic component manufacturing. The solicitation was posted on July 22, 2026, and responses are due by August 6, 2026, providing a four-week window for qualified vendors to submit proposals. Performance obligations will be carried out in alignment with federal procurement guidelines, though the specific delivery location and point of contact details are not provided. The contract is accessible via the DIBBS platform for authorized participants to review full terms and conditions.

General Info

Manufacture and deliver MIL-STD electrical connectors per DLA requirements by August 6, 2026, under DoD subcontract.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

334417 - Electronic Connector ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 05:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and delivery of electrical connector receptacles (NSN: 5935-00-136-6380, P/N: 9850366G004) compliant with DLA Master List, MIL-STD, and environmental regulations.

Similar Contracts

Same NAICS industry code

Qualified Manufacturer of MIL-Spec Electrical ConnectorsThe contract requires the manufacture and supply of 329 electrical plug connectors designated by NSN 5935-01-236-0525, which must fully comply with the MIL-DTL-28840/16D specification and Revision E standards. Only suppliers listed on the Defense Logistics Agency’s Qualified Manufacturers List are eligible to bid, ensuring adherence to rigorous military-grade performance and quality requirements. The work is structured as a subcontract under the Department of Defense’s Maritime Supply Chain, with a strict deadline for responses set for August 6, 2026, and the solicitation was publicly posted on July 22, 2026. The NAICS code 334417 indicates the scope falls under semiconductor and other electronic component manufacturing. All delivered components must meet exacting defense specifications and be sourced exclusively from approved manufacturers to guarantee interoperability and reliability in critical military applications.

MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

Electrical Connector Manufacturing (Receptacle Type)The contract solicits the manufacture and supply of military-spec electrical connector receptacles identified by NSN 5935011690103, requiring strict compliance with MIL-DTL-28804E and MIL-DTL-28804/3E technical standards. All aspects of production including quality assurance, packaging, labeling, and delivery must adhere to defense-grade specifications to ensure operational reliability in austere environments. The work scope encompasses end-to-end manufacturing with no outsourcing allowed without explicit approval, and all units must undergo rigorous inspection and testing protocols prior to shipment. This subcontract opportunity, posted by the Department of Defense through the Maritime Supply Chain office, has a response deadline of August 6, 2026, and is classified under NAICS code 334417 for other electronic component manufacturing. No set-aside provisions are specified, making it open to all qualified vendors, and the place of performance is not designated, allowing flexibility as long as delivery requirements are met. Participation requires full familiarity with DoD acquisition regulations and the ability to demonstrate proven capability in producing military-grade connectors under similar contractual obligations.

MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

Electrical Connector Manufacturing (Qualified Defense Electronics)The contract requires the manufacture and delivery of a defense-qualified electrical connector identified by NSN 5935011690102 and Part Number M28804/3-9N, fully compliant with the MIL-DTL-28804/3E specification and qualified supplier list requirements. This is a subcontract under the Department of Defense’s Maritime Supply Chain, targeting the production of a critical component used in military-grade electronic systems where reliability and environmental resilience are paramount. The product must meet stringent military standards for performance, durability, and quality assurance, ensuring compatibility and interoperability across defense platforms. The solicitation was posted on July 22, 2026, with a response deadline of August 6, 2026, providing potential suppliers with a limited window to submit proposals. The NAICS code 334417 identifies this as a contract within the Other Electronic Component Manufacturing sector, indicating specialized manufacturing expertise is required. The place of performance and point of contact details are unspecified, but the contract is accessible through the DIBBS portal, and all submissions must align with defense procurement protocols. Only vendors with existing QPL status for MIL-DTL-28804/3E connectors are expected to be eligible to respond.

MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

Electrical Connector Manufacturing and AssemblyThe contract involves the manufacture and final assembly of military-spec electrical connector receptacles identified by NSN 5935011878000 and part numbers 88-548095-000 or C10960-23-53S, requiring strict adherence to DLA Master List specifications, environmental resistance standards, and precise dimensional tolerances to ensure mission-critical performance under demanding conditions. All production must meet or exceed military-grade requirements for durability, conductivity, and resistance to corrosion, vibration, and extreme temperatures. This is a subcontract opportunity under the NAICS code 334417, managed by the Department of Defense through the Maritime Supply Chain organization, with proposals due by August 6, 2026. The work is subject to federal procurement regulations and must be performed in compliance with all applicable defense logistics and quality assurance protocols. The exact place of performance and point of contact are unspecified in the posting, but all bidders must ensure their facilities and processes align with DoD standards for secure, traceable, and auditable production of defense electronics components.

MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

Electrical Connector Manufacturing and AssemblyThe contract pertains to the manufacture and assembly of military-spec electrical connectors designated by NSN 5935010935199 and Part No MS90555C44412S, featuring crimp-type removable contacts that must fully comply with the military standards MIL-DTL-22992H and MS90555G. The work requires precise adherence to technical specifications ensuring durability, performance, and interoperability under demanding operational conditions typical of defense applications. This subcontract is part of the broader Maritime Supply Chain initiative under the Department of Defense, with performance expected to meet the rigorous quality and reliability benchmarks mandated for military hardware. The solicitation was posted on July 22, 2026, with a firm response deadline of August 6, 2026, indicating a structured procurement timeline for potential suppliers. The NAICS code 334417 identifies the industry as Electronics and Component Manufacturing, emphasizing the technical specialization required. While the agency's physical location and point of contact details are not provided, the contract is accessible via the DIBBS platform, suggesting a formalized federal acquisition process. All bids must demonstrate capability to deliver fully compliant units that meet military-grade requirements without exception.

MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

CONNECTOR, PLUG, ELECThis contract is for the procurement of an electrical plug connector identified by part number BACC45AD14A5P from Boeing and BP06CE-14-5P from Amphenol Corp, with the NSN 5935-00-687-0018. A total quantity of 39 units is specified, to be delivered FOB origin within 259 days with zero variance allowed in quantity. The item is classified as a commercial item, and all supplies must comply with DLA packaging requirements and technical quality standards referenced from the DLA Master List of Technical and Quality Requirements. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for specific functional components such as batteries, fluorescent lights, sensors, weapon systems, or chemically specified reagents; portable devices containing mercury must include shock-proof design and a secondary containment barrier as per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-129 labeling requirements and either FED-STD-313 for hazardous materials or ASTM D3951 for non-hazardous commercial packaging, with palletization following RP001 specifications. Inspection and acceptance occur at the destination, and the unit of issue is each (EA). The contract is issued under DLA Direct, CONUS coverage and identifies Bryan Fair from the Department of Defense as the primary point of contact.

MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

CONNECTOR, RECEPTACLE, EThis contract under solicitation number SPE7M1-26-U-4565 is an indefinite-delivery contract for the procurement of a connector, receptacle, electrical, identified by NSN 5935011690102 and part number M28804/3-9N, manufactured in accordance with MIL-DTL-28804/3E Revision E dated 02/20/2025 and MIL-DTL-28804E Revision E dated 08/23/2021. The item is classified as a qualified product requiring compliance with the Qualified Products List (QPL) for Federal Stock Class 5935 connector assemblies and contacts as specified in procurement note H01. The contract specifies a unit price of $48.000 per unit with an estimated quantity of 48 units for a total estimated value of $2,304.00, though this is non-binding as the contract is indefinite-delivery with a maximum ceiling of $350,000.00 and no guaranteed minimum purchase. Delivery is required within 95 days after award, with FOB Origin as the submission basis but FOB Destination as the governing term for delivery and acceptance. Inspection and acceptance occur at the destination point, governed by FAR 52.246-2, and all items must be physically marked per RQ017 as critical application items, with packaging strictly complying with MIL-STD-129 and the DLA Master List of Technical and Quality Requirements, which override commercial standards like ASTM D3951. Hazardous materials must adhere to TQ requirement IP025 and 29 CFR 1910.1200, with non-hazardous items packaged commercially while still conforming to DLA precedence. Palletization must follow RP001, and packaging must be labeled with the correct unit of issue and quantity per unit pack. All submissions must be made electronically via the DLA-BSM Internet Bid Board System by the deadline of August 6, 2026, with compliance mandatory across numerous Federal Acquisition Regulation clauses related to employment verification, trafficking in persons, sustainable products, cybersecurity, export controls, anti-corruption, and whistleblower protections. The contractor must provide a Unique Entity Identifier and affirm socioeconomic status where applicable, with specific disclosures required for defense telecommunications equipment and

MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

CONNECTOR, PLUG, ELECTRIThe contract is an indefinite delivery contract (IDC) for the procurement of 20 electrical plug connectors, identified by NSN 5935000077363 and part number 348-36E24-41S1 from AMPHENOL CORP, under solicitation SPE7M1-26-U-4512. The estimated annual quantity is 20 units, with a guaranteed minimum of three units upon award, and the total contract value is capped at $350,000.00; however, no unit pricing is provided in the contract, making the base value contingent on future delivery orders. Deliveries are to be made FOB origin within 210 days of order issuance, with inspection and acceptance occurring at the destination. Compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and barcoding is mandatory, with specific packaging codes and preservation methods defined, including prohibition of mercury or mercury compounds in preservation, packaging, or marking per IP056. The use of Class I ozone-depleting substances in any phase of manufacturing, cleaning, or testing is strictly prohibited unless written approval is obtained from the Contracting Officer, and functional uses in batteries, lighting, or specialized instrumentation are exempted under Navsea 5100-003D requirements. The product is designated as a critical application item, and physical identification marking of bare items is required. All supplies must comply with hazardous materials handling regulations, the Hazard Communication Standard, and the prohibition of hexavalent chromium. The contract incorporates numerous FAR and DFARS clauses governing contract type, small business representation, equal opportunity, combating human trafficking, employment eligibility verification, cybersecurity safeguarding, and unauthorized obligations. Invoicing must be processed exclusively through WAWF, and contractor representations concerningUnique Entity Identifier, CAGE Code, small business status, socioeconomic certifications, and compliance with the prohibition on covered defense telecommunications equipment must be submitted via SAM.gov. The Contracting Officer, Bryan Fair, is the point of contact, and the contracting activity is the Department of Defense’s Maritime Supply Chain. No evaluation factors or award methodology are specified in the solicitation, and no attachments are listed, indicating that evaluation may be based on technical acceptability and price within the ceiling.

MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

ADAPTER, CONNECTORThis contract is for the procurement of adapter connectors classified as commercial items, requiring strict compliance with Department of Defense technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements. The items must adhere to specific finish specifications per MIL-F-140272D, including a minimum nickel plating thickness of 0.0025 inches and a final silver plating of 0.0076 inches, with no lock wire holes permitted despite the drawing not showing them. Sampling inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and critical attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0. The item is designated as a critical application, requiring final inspection and acceptance at the manufacturer’s facility, with technical documentation made available to verify compliance—not merely count, kind, or condition inspections. Mercury and mercury-containing compounds are prohibited from direct contact with the hardware except for approved functional uses such as batteries, fluorescent lamps, sensors, or weapon systems, with portable devices containing mercury requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Class I ozone-depleting substances are strictly forbidden in manufacturing, cleaning, or testing processes, with any substitutions requiring explicit written approval from the contracting officer, though exemptions apply to commercial items as defined by FAR 11.001. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with no special markings required, and palletization must meet DLA packaging requirements. The contract specifies a delivery window of 164 days FOB origin with zero quantity variance, inspected and accepted at the destination, for a total of 2,510 units under purchase request 1000237944, with NSN 5935-00-701-2215. Multiple qualified suppliers are listed, including Raytheon, ITT Cannon, Lockheed Martin, and others, each providing the part under their respective part numbers. A mandatory Certificate of Quality Compliance is required, and technical data referenced in the solicitation must be fully met even if incomplete.

MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

CONNECTOR, RECEPTACLThe contract pertains to the procurement of electrical connector assemblies, specifically part number MS90555C44412S with NSN 5935010935199, under an Indefinite Delivery Contract (IDC) issued by the Department of Defense’s Maritime Supply Chain. The item is classified as a qualified product requiring compliance with the Qualified Products List (QPL) for Federal Stock Class 5935 connector assemblies and contacts as defined in procurement note H01. The connector design must adhere to the technical specifications outlined in MIL-DTL-22992H, Supplement 1, and MS90555G, Revision G dated October 4, 2024. Delivery is required within 106 days, FOB origin, with inspection and acceptance occurring at the destination. The estimated annual quantity is 81 units, though this is non-binding and not guaranteed for purchase. The contract establishes a maximum value of $350,000.00 with a guaranteed minimum of 12 units upon award. Price is the primary evaluation factor, indicating a likely Lowest Price Technically Acceptable (LPTA) award approach. Environmental and safety regulations impose strict limitations on materials used in manufacturing. The intentional addition of mercury or mercury-containing compounds is prohibited except in exempted applications such as batteries, fluorescent lamps, sensors, weapon systems, or NAVSEA-specified reagents, with portable mercury-containing devices required to have shock-proof construction and secondary containment per NAVSEA 5100-003D. Use of Class I ozone-depleting substances in any phase of production is strictly forbidden without prior written approval from the Contracting Officer, and this prohibition supersedes all other specification requirements. Packaging must comply with MIL-STD-2073-1E, using Preservation Method 31 (clean and dry), and marking must follow MIL-STD-129 with a special code ZZ indicating additional requirements. Connectors with removable crimp-type contacts must have those contacts stored separately in a noncorrosive rigid container, such as a vial or box, enclosed within the unit container; both current and superseded part numbers for contacts must be labeled per SAE-AS39029. Compliance with hazardous material labeling and safety data sheet submission is mandatory, and the contract incorporates numerous FAR and DFARS clauses related to cybersecurity, trafficking in persons, employment eligibility, sustainable

MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

BACKSHELL, ELECTRICAL CThe contract pertains to the procurement of a backshell for an electrical connector, identified by part number C8233-1-20 and NSN 5935-01-068-8956, with a quantity of ten units required. Delivery must be completed within twenty days from the contract award, with shipment terms FOB origin and no tolerance for quantity variance. The item must fully comply with referenced technical and quality standards, including MIL-STD-1916 or ASQ H1331 for sampling, where critical attributes require zero non-conformances and verification levels of VII, IV, and II. All packaging, marking, and shipping must conform to MIL-STD-2073-1E and MIL-STD-129, using approved packaging codes and palletization methods per DLA requirements. The use of ozone-depleting substances is strictly prohibited in any phase of manufacture or processing unless written approval is obtained from the contracting officer. Approved vendors include WilliamSRDM Inc., GleNAir Inc., and Joslyn Sunbank Company LLC, each with their respective part numbers. The end destination is specified as 1inci Hava Bakim Fabrika Mudurlugu in Eskişehir, Turkey, with A.J Worldwide Services designated as the freight forwarder. The item is subject to DLA's Master List of Technical and Quality Requirements, covered defense information protocols, and Federal Acquisition Regulation controls, with inspection and acceptance occurring at the origin. The solicitation number is SPE7M5-26-T-339E, with a response deadline of August 3, 2026, and the required delivery date is July 27, 2026.

ACTIVE DEVICES DIVISION

POSTED

about 14 hours ago

DEADLINE

BACKSHELL, ELECTRICAThe contract specifies the procurement of two Backshell, Electrica adapter cable clamp units with part number 443HS001NF1507-3 and NSN 5935-01-444-4868, to be delivered within 20 days to the delivery address in Orangeburg, South Carolina. All items must be shipped FOB origin using the fastest traceable means, excluding parcel post, and must comply with DLA’s Packaging Requirements for Procurement (RP001) and MIL-STD-129 for marking and labeling. The material is not classified as hazardous under FED-STD-313, so commercial packaging per ASTM D3951 applies unless overridden by stricter DLA Master List of Technical and Quality Requirements referenced by R or I numbers, which take precedence. Each unit must be physically marked per RQ017, and any non-accepted supplies must have government identification removed per RQ011. The contract mandates zero variance in quantity, with inspection and acceptance occurring at the destination. The Unit of Issue is each (EA), with a total price of $2.00 per unit, and the delivery must be completed no later than July 20, 2026. Packaging must be palletized per RP001, with the bulk break point and freight shipping address both located at 1132 Cook Road, Orangeburg, SC 29118-8203. The contract number is SPE7M5-26-T-339W, solicited by the Department of Defense’s Active Devices Division, with Margaret Smith as the primary point of contact.

ACTIVE DEVICES DIVISION

POSTED

about 14 hours ago

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

FOB Origin Logistics and Shipment CoordinationThe contract pertains to the coordination of freight shipments originating under FOB terms, requiring comprehensive management of logistics for Department of Defense locations. This includes end-to-end oversight of documentation, selection and oversight of carriers, and real-time tracking of deliveries to multiple destinations, ensuring compliance with military supply chain standards. The work involves meticulous planning and execution to meet stringent DoD requirements for delivery accuracy, timing, and recordkeeping across diverse and often remote locations. Subcontracting under NAICS code 488510, this effort is managed by the Maritime Supply Chain division of the Department of Defense, with responses due by August 6, 2026. The scope demands expertise in international and domestic freight logistics, with an emphasis on seamless handoffs between carriers and visibility into shipment status from origin to final military destination. Contractors must demonstrate proven capability in handling sensitive military shipments, maintaining secure and timely communication channels, and adapting to dynamic delivery schedules without disruption to operational readiness.

Freight Transportation Arrangement

POSTED

about 14 hours ago

DEADLINE

Military-Compliant Packaging and PalletizationThe contract requires the packaging, preservation, and palletization of circuit breakers to meet stringent military standards including MIL-STD-129 and RP001, ensuring full compliance with Department of Defense logistics protocols administered by the Maritime Supply Chain under the DLA. All work must align with military specifications for identification, labeling, protective packaging, and unit load configuration to facilitate efficient handling, storage, and transportation within the defense supply chain. The requirement is issued as a subcontract under NAICS code 493190, indicating a focus on warehousing and storage services tailored to defense needs. Responses are due by August 6, 2026, with the solicitation posted on July 22, 2026, through the DIBBS platform. The place of performance and specific agency location details are not provided, but performance is expected to support DLA's broader logistics infrastructure. The subcontractor must demonstrate capability to execute precision packaging under defense-grade standards, including durable preservation techniques to protect sensitive electrical components from environmental degradation during extended storage and transit. Compliance, documentation accuracy, and adherence to military labeling requirements are critical to contract success.

Other Warehousing and Storage

POSTED

about 14 hours ago

DEADLINE

Hazardous Materials Packaging and LabelingThe contract requires specialized packaging and labeling of circuit breakers that contain hazardous materials, ensuring full compliance with OSHA and DFARS regulations. All packaging must include accurate Safety Data Sheets and properly formatted hazard warning labels to meet federal safety and documentation standards. The work is structured as a subcontract under the NAICS code 561990, indicating it falls under other support services, and is issued by the Department of Defense through its Maritime Supply Chain division. Performance of the contracted services is expected to align with defense supply chain requirements, though the specific place of performance is not designated. The solicitation was posted on July 22, 2026, with a response deadline of August 6, 2026, leaving a two-week window for interested parties to submit proposals. There is no set-aside designation specified, meaning the contract is open to all qualified contractors regardless of business size or status. The opportunity is accessible through the DIBBS platform, and while no point of contact is listed, all queries must be directed through the official system. The successful bidder will be responsible for the end-to-end handling of hazardous material packaging, ensuring that each circuit breaker unit is properly identified, documented, and shipped in accordance with all applicable military and occupational safety mandates.

All Other Support Services

POSTED

about 14 hours ago

DEADLINE

Circuit Breaker Manufacturing and SupplyThe contract seeks the manufacture or sourcing of circuit breakers that meet stringent military and federal technical standards, with full compliance required to the DLA Master List and critical application specifications. These components must be engineered for reliability in demanding defense environments, ensuring operational integrity in high-stakes systems. The solicitation is issued as a subcontract under NAICS code 335313, indicating a focus on electrical equipment manufacturing, and is managed by the Department of Defense through the Maritime Supply Chain organization. Responses are due by August 6, 2026, with the opportunity posted on July 22, 2026, providing a limited time window for qualified suppliers to submit proposals. While no specific set-aside preferences or geographic restrictions are outlined, the place of performance remains undefined, suggesting flexibility in logistics as long as compliance and delivery requirements are met. All bidders must demonstrate proven experience with defense-grade electrical components and the capacity to meet exacting quality and documentation standards tied to federal procurement protocols.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 14 hours ago

DEADLINE

Small Business Subcontracting Support (Administrative)The contract seeks administrative support services focused on ensuring small business compliance within the Maritime Supply Chain division of the Department of Defense, specifically for a Total Small Business Set-Aside under FAR 19.5. The work involves managing socioeconomic status reporting and facilitating joint venture disclosures through SAM.gov, requiring accurate and timely documentation to maintain eligibility and compliance for small business contracting opportunities. The effort is classified under NAICS code 541611, indicating services related to management consulting, with a specific emphasis on regulatory adherence and subcontracting transparency. Responses are due by August 6, 2026, and the solicitation is open to small businesses qualifying under the SBA's set-aside criteria, with no specific place of performance or point of contact listed. The contract is administratively oriented, emphasizing data integrity, reporting accuracy, and adherence to federal small business regulations rather than operational or technical deliverables. Interested parties must access the full solicitation details via the provided DIBBS link, as additional requirements may be specified in supporting documentation not included in the public summary.

Administrative Management and General Management Consulting Services

POSTED

about 14 hours ago

DEADLINE

Barcoding and Marking ServicesAll packaging and components must be marked and barcoded in strict compliance with MIL-STD-129 specifications, ensuring uniformity and traceability across the supply chain. If required, Unique Item Identifiers must be applied in accordance with DoD guidelines to support full asset visibility and system integration. The work must be fully compatible with the WAWF system to enable seamless electronic data exchange and logistics tracking. This subcontract is a total small business set-aside under FAR 19.5, designated for small business concerns, and falls under NAICS code 541940. The opportunity was posted on July 22, 2026, with proposals due by August 6, 2026, and is managed by the Maritime Supply Chain division within the Department of Defense.

Veterinary Services

POSTED

about 14 hours ago

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires the provision of compliant hazard warning labels and Safety Data Sheets for all hazardous materials included in a motor parts kit, strictly adhering to OSHA and Department of Defense regulatory standards. All labeling and documentation must meet federal safety protocols to ensure proper handling, storage, and disposal of hazardous substances throughout the supply chain. The requirement is issued as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond. The NAICS code 541620 designates it as an environmental consulting and related services category, aligning with the technical and compliance expertise needed. The solicitation was posted on July 22, 2026, with responses due by August 6, 2026, and the overseeing agency is the Department of Defense through its Maritime Supply Chain organization. The place of performance and point of contact details are not specified, but the official solicitation can be accessed via the DIBBS portal.

Environmental Consulting Services

POSTED

about 14 hours ago

DEADLINE

Packaging and Preservation ServicesThe contract requires the provision of dry storage preservation and packaging services for motor parts kits utilizing Method 10 with wrap material JA, fully complying with DLA RP001 and MIL-STD-2073-1E standards. All work must adhere to strict military specifications for long-term preservation and packaging to ensure component integrity during storage and transit. The requirement is issued as a subcontract under a Total Small Business Set-Aside designation, exclusively targeting small business concerns as defined by the SBA, with the NAICS code 312230 indicating classification within the beverage and tobacco product manufacturing sector, though the actual scope pertains to defense logistics and packaging services. The solicitation was posted on July 22, 2026, with a response deadline set for August 6, 2026, and is managed by the Maritime Supply Chain organization under the Department of Defense. The place of performance and specific office address details are not provided, but the work is expected to support U.S. defense logistics needs. Interested parties must respond through the designated DIBBS platform, and the contract does not specify the awarding office contact point, suggesting a standardized procurement process managed centrally. Compliance with technical documentation and preservation standards is mandatory for qualification.

Tobacco Manufacturing

POSTED

about 14 hours ago

DEADLINE

Motor Overhaul Parts Kit SupplyThe contract solicits the supply of a complete overhaul parts kit for motors, designated by NSN 6105005228528, to enable full restoration of motors to operational condition. All components required for a comprehensive rebuild are included, and the parts must adhere to government engineering source approval standards to ensure compatibility, reliability, and performance. This procurement is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, promoting small business participation in defense-related supply chains. The North American Industry Classification System code 335312 identifies the relevant manufacturing sector for electric motor and generator production. The solicitation was posted on July 22, 2026, with a response deadline of August 6, 2026, providing vendors a three-week window to submit proposals. The acquiring organization is the Maritime Supply Chain under the Department of Defense, indicating the motors are intended for naval or maritime applications. While specific delivery location details are not provided, the parts are expected to support maintenance activities within the defense supply chain. Interested parties must access the official solicitation portal via the provided UI link for full requirements, documentation, and submission instructions, and compliance with all federal acquisition regulations is mandatory.

Motor and Generator Manufacturing

POSTED

about 14 hours ago

DEADLINE

Packaging and Marking Compliance ServicesThe contract requires full compliance with MIL-STD-2073-1E and MIL-STD-129 standards for the packaging and marking of capacitor units, including precise barcoding systems and appropriate hazardous materials labeling to meet federal military specifications. All work must be performed under a Small Business Set-Aside classification as defined by the SBA, ensuring eligibility and participation by qualified small businesses. The solicitation falls under NAICS code 541690 and is issued by the Department of Defense through the Maritime Supply Chain office, with a response deadline of August 6, 2026, and a posting date of July 22, 2026. The place of performance and point of contact details are not specified, but the contract is accessible through the DIBBS system for further information.

Other Scientific and Technical Consulting Services

POSTED

about 14 hours ago

DEADLINE

Ocean Transportation via U.S.-Flag VesselsThe contract pertains to the ocean transportation of capacitor units via U.S.-flag vessels, ensuring full compliance with the Cargo Preference Act and Maritime Administration regulations. This requirement mandates that all freight be carried on vessels registered under the U.S. flag to support national security and domestic shipping interests, and the transportation must adhere strictly to MARAD guidelines governing cargo preference obligations. The solicitation is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, reinforcing the federal commitment to fostering small business participation in defense-related logistics. The North American Industry Classification System code 483110 identifies the scope as water transportation of cargoes, specifically ocean freight services. The opportunity was posted on July 22, 2026, with responses due by August 6, 2026, and is managed by the Maritime Supply Chain under the Department of Defense. While no specific port or delivery locations are detailed, the performance will involve international ocean transport routes necessary to deliver capacitor units for defense purposes. All participating carriers must maintain active U.S. flag status and demonstrate regulatory compliance throughout the shipping lifecycle, from loading through unloading, with potential audits to verify adherence to Cargo Preference Act requirements.

POSTED

about 14 hours ago

DEADLINE

Fixed Electrolytic Capacitor Manufacturing and SupplyThe contract entails the manufacture and delivery of fixed electrolytic capacitors that have been reverse-engineered to meet the strict technical standards outlined in MIL-T-31000, ensuring full compatibility and performance for defense-grade applications. All delivered units must be accompanied by complete technical documentation, including material certifications, manufacturing processes, and test results, and require formal government approval prior to acceptance. This is a subcontract under a Total Small Business Set-Aside, exclusively available to small business concerns as defined by the SBA, with the NAICS code 334413 indicating classification within the Electronic Component and Product Manufacturing sector. The solicitation is managed by the Maritime Supply Chain under the Department of Defense, with responses due by August 6, 2026, and the performance location remains unspecified but is expected to align with defense logistics requirements. The procurement is part of broader efforts to secure reliable, domestically sourced critical electronic components for military systems.

Semiconductor and Related Device Manufacturing

POSTED

about 14 hours ago

DEADLINE