This Government Contract opportunity from Department Of Defense was posted on September 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Manufacture and Supply of Fuel Transfer Pump Assemblies

Closed

Federal

Submission Closed09/16/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333999

New

SLED

Hydraulic System Supplier and InstallerThis subcontract agreement establishes a partnership for the supply and installation of critical hydraulic components for prime contractors working on Texas Department of Transportation projects. The scope of work includes the provision and setup of hydraulic pumps, valves, hoses, and cylinders, as well as the installation of hydraulic reservoirs and the routing of high-pressure hoses. Additionally, the contractor is responsible for the calibration of control valves to ensure precise boom movement, utilizing actuators and control manifolds that adhere to SAE hydraulic standards. The ultimate objective of the contract is the delivery of a fully functioning hydraulic power system for an aerial device. Interested parties should note that the response deadline for this opportunity is October 23, 2026. The project falls under NAICS code 333999 and is managed through the Texas Department of Transportation.

Texas Department of Transportation

POSTED

DEADLINE

Telescoping and Articulating Aerial Device SupplierThis subcontract agreement involves the supply and installation of truck-mounted aerial lift systems for prime contractors working on Texas Department of Transportation projects. The scope of work encompasses the complete engineering, fabrication, and mounting of telescoping booms and articulating lower booms onto truck chassis, utilizing specialized hydraulic cylinders and mounting brackets to deliver a fully operational device. All equipment must strictly adhere to ANSI and OSHA standards for aerial lifts to ensure safety and regulatory compliance. The solicitation was posted on October 2, 2026, with a response deadline of October 23, 2026, falling under NAICS code 333999.

Texas Department of Transportation

POSTED

DEADLINE

Supply of Beam-Type Sling (NSN 3940-01-659-0446)This subcontract, issued by the Department of Defense under a Total Small Business Set-Aside, requires the manufacture or procurement of one Beam-Type Sling identified by NSN 3940-01-659-0446. The item must be produced in strict accordance with TDP Rev B Gen 2 and delivered to a designated DLA location in Fort Lee, Virginia. The contractor is required to ship the equipment via traceable means within a 20-day delivery window. Compliance with NIST SP 800-171 DoD Assessment Requirements is mandatory for this engagement. The opportunity falls under NAICS code 333999 and was posted on October 1, 2026, with a response deadline of October 13, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Manufacturing of Countersink Gage (NSN 5220-01-140-0171)This subcontract involves the manufacture of a single precision countersink gage, identified by NSN 5220-01-140-0171, for prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment projects. The fabrication must be performed using precision machining equipment in strict accordance with Basic Drawing NR 98897 110G050 Rev 10 and Reference Drawing NR 98752 200415485 Rev E. The final deliverable is one completed and packaged gage to be performed at Mountain Home AFB. To be eligible, the contractor must meet several rigorous regulatory and security requirements, including a CCAL listing and the submission of DD Form 2345. Compliance with ITAR/EAR regulations is mandatory, and the provider must adhere to NIST SP 800-171 and CMMC Level 2 cybersecurity standards. The solicitation was posted on October 1, 2026, with a response deadline of October 13, 2026, under NAICS code 333999.

Defense Logistics Agency

POSTED

DEADLINE

500g Metric Weight SupplierThis subcontract involves the manufacture and delivery of a single precision-engineered 500 gram cylindrical metric weight for the Department of Defense Medical Supply Chain. The item must be constructed from Cold Rolled Steel with a satin finish in accordance with ACP 215 specifications. Compliance with Medical Marking Standard No. 1 and MIL-STD-2073-1E packaging requirements is mandatory, and the supplier must adhere to the Buy American Act and the Berry Amendment. The project is managed under NAICS code 333999 for the Medical Supply Chain FSH. The solicitation was posted on October 1, 2026, with a response deadline of October 8, 2026. Performance for this contract is designated for FPO 09566-4008.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Supply of Centrifugal Fans (NSN 012781310)This subcontract involves the supply of centrifugal fans for prime contractors supporting the DDSP New Cumberland Facility under the Department of Defense. The selected provider is responsible for manufacturing or sourcing fans that strictly adhere to NSN 012781310 and FSC 4140 specifications. All deliverables must be shipped, marked according to MIL-STD-129, and palletized in compliance with RP001 DLA Packaging Requirements. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 333999. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by October 13, 2026, to ensure compliance with the procurement timeline established by the agency.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supplier of Profile Gages (NSN 5220-01-343-1688)This subcontract involves the supply of six precision profile gages, specifically matching NSN 5220-01-343-1688, to support prime contractors delivering on DLA Troop Support supply contracts. The selected provider is responsible for manufacturing or sourcing these items using precision machining and calibration equipment to ensure full compliance with DLA quality standards for precision measurement tools. The contract is managed by the Department of Defense through the DDSP New Cumberland Facility, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must respond by October 13, 2026, for this requirement categorized under NAICS code 333999.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Centrifugal Fans (NSN 4140014767280)This subcontract involves the manufacture or procurement of 67 centrifugal fans meeting NSN 4140014767280 specifications for prime contractors supporting DLA supply contracts. The project requires strict adherence to marking and packaging standards, specifically MIL-STD-129, RP001, and MIL-STD-2073-1E, with a mandate to use non-plastic materials for packaging. Additionally, the provider must submit a Source Approval Request per RC001. The contract is managed under the Department of Defense through DLA DIST SAN JOAQUIN, with performance taking place in Tracy, California. Compliance with the Buy American Act, the Berry Amendment, and DFARS 252.223-7008 is mandatory. The procurement falls under NAICS code 333999, with a response deadline set for October 13, 2026.

POSTED

DEADLINE

Manufacture and Supply of Thread Plug GagesThis subcontract involves the manufacture and supply of precision-engineered thread plug gages for prime contractors supporting DLA supply contracts. The scope of work includes precision machining, turning, and threading to exact tolerances, with a requirement for tools to be calibrated using micrometers and optical comparators in accordance with RA001 technical requirements. All deliverables must adhere to RP001 packaging standards and DFARS 252.223-7008, and must be provided with certifications of accuracy. Managed by the Department of Defense through DLA DIST SAN JOAQUIN, the contract falls under NAICS code 333999. The place of performance is located in Tracy, California. The solicitation was posted on October 1, 2026, with a response deadline of October 13, 2026.

POSTED

DEADLINE

Manufacture and Supply of Countersink Gage (NSN 5220-01-140-2027)This subcontract involves the manufacture and supply of a precision-engineered countersink gage for the Defense Logistics Agency, specifically meeting NSN 5220-01-140-2027 specifications. The contractor is required to adhere to DLA Master technical and quality requirements RA001, utilizing precision machining and calibration equipment to ensure all high-tolerance standards are met for the delivery of one packaged and labeled unit. Performance will take place at Mountain Home AFB. To be eligible, the provider must maintain Buy American Act compliance and complete a CMMC Level 2 Self-Assessment. The opportunity was posted on October 1, 2026, with a response deadline of October 13, 2026, under NAICS code 333999.

Defense Logistics Agency

POSTED

DEADLINE

Heavy Equipment Powertrain and Hydraulic Component SupplierThis subcontract agreement establishes a partnership for the supply of critical powertrain and hydraulic components used in the assembly of asphalt removal units for the Texas Department of Transportation. The scope of work includes the provision of C4.4 Tier 4 engines, face-sealed hoses, and braided electrical harnesses featuring sealed connections. To ensure operational safety and quality, all electrical components must maintain UL, FMRC, or NEMA listings. The supplier is responsible for delivering certified powertrain and hydraulic systems to prime contractors, with the solicitation process remaining open for responses until October 30, 2026.

Texas Department Of Transportation

POSTED

DEADLINE

Final Assembly and IntegrationThis subcontract for Final Assembly and Integration involves the factory-mounting of generator units onto trailer chassis for prime contractors supporting federal equipment projects. The scope of work requires a manufacturer-authorized assembly facility to secure the generators and integrate all necessary electrical and braking systems using industrial mounting hardware. A critical technical requirement is that the final integrated system must maintain a dry weight of under 9,999 lbs. The project is associated with the Department of University of Hawaii and falls under NAICS code 333999. Interested parties must submit their responses by the deadline of October 14, 2026. The ultimate deliverable is a fully integrated, trailer-mounted generator system ready for deployment.

Department of University of Hawaii

POSTED

4 days ago

DEADLINE

in 10 days

AI Contract Overview

This subcontract, issued by the Department of Defense, requires the manufacture and supply of 58,000 units of Fuel Transfer Pump Assemblies under NSN 2520-00-894-9563. The project is designated as a Total Small Business Set-Aside and is intended to support prime contractors on DLA supply contracts. The selected vendor must manufacture all pump assemblies to specific NSN requirements, utilize specialized tooling for fuel-grade pumps, and ensure all units are marked in accordance with MIL-STD-129. The scope of work includes executing Contractor First Article Tests as required by FAR 52.209-3 and maintaining strict adherence to quality standards outlined in FAR 52.246-1. Performance is centered in Anniston, and the contract involves the delivery of the full quantity of completed assemblies to meet defense logistics needs. Interested parties must respond by the deadline of September 16, 2026, to participate in this procurement opportunity.

General Info

DoD small business subcontract for 58,000 fuel transfer pump assemblies by September 2026.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

NAICS

333999 - All Other Miscellaneous General Purpose Machinery Manufacturing

Place of Performance

ANNISTON, AL, 36201-4199, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE7L3-26-Q-1154.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PUMP ASSEMBLY, FUEL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 2

subcontract

Response DeadlineSep 16

Deadline has passed

Submission Closed

09/16/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Office AddressN/A

ContactsNo contact information available

Full Description

Supplies 58,000 units of Fuel Transfer Pump Assemblies (NSN 2520-00-894-9563) for prime contractors on DLA supply contracts. Manufactures pump assemblies to NSN specifications, executes Contractor First Article Tests per FAR 52.209-3, and marks units per MIL-STD-129. Requires tooling for fuel-grade pumps and compliance with FAR 52.246-1 quality standards. Delivers 58,000 completed pump assemblies.