This Government Contract opportunity from Department Of Defense was posted on October 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Manufacture and Supply of Machine Screws (NSN 5305014728143)

Closed

Federal

Submission Closed10/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # N0010427QXA12

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QNB15

This contract, issued under solicitation N0010426QNB15 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, requires the supply of 800-degree F silver-plated self-locking nuts meeting stringent quality and traceability standards for use in critical shipboard systems. The material is designated as SPECIAL EMPHASIS Level I, meaning any defect could lead to catastrophic failure, loss of life, or loss of a vessel, necessitating rigorous control measures throughout production and delivery. The nuts must conform to Newport News Shipbuilding drawing 501-4457023 and comply with NASM25027 and NASM21046 Modified specifications, with specific dimensional and mechanical tolerances outlined, including a minimum axial tensile strength of 225,000 lbs. Each unit must carry a permanent traceability mark per MIL-STD-792, including material symbol, manufacturer identification, and a unique heat or lot number that directly links to certifications, with an additional fastener provided per heat/lot for full traceability. All materials must be mercury-free, and internal threads must be cut, not cold-formed. The contractor must maintain an ISO-9001 quality system with calibration controls per ISO-10012 or ANSI-Z540.3, or an acceptable alternative under MIL-I-45208 and MIL-STD-45662, and is subject to Government Quality Assurance at the contractor’s facility with DCMA oversight. The contract mandates comprehensive documentation and certification requirements, including 100% verification of material certifications, nondestructive testing results, and traceability markings. Certification reports must include the contractor’s name, contract number, NSN, test standards, acceptance criteria, and an unqualified, signed statement of compliance, with no disclaimers permitted. First Article Testing must be submitted and approved prior to production, and can be satisfied through prior qualification letters or verified sourcing from qualified manufacturers. All certification data must be submitted via Wide Area Work Flow (WAWF) to Portsmouth Naval Shipyard for review and acceptance before shipment, with specific routing codes and notification email required. Inspection and acceptance occur at origin under Government supervision but final acceptance is at destination, with lot acceptance based on zero-defect criteria and sampling in accordance with ANSI/ASQ-Z1.4 for large lots, or 100% inspection for smaller lots. The contract operates under

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Supply of Shear Bolts (NSN 5306-01-123-7105)This subcontract involves the manufacture or procurement of 76 specialized shear bolts, identified by NSN 5306011237105, for prime contractors supporting the Department of Defense. Managed by the DLA Weapons Support ASC Commodities Division, the contract requires strict adherence to DFARS 252.223-7008 concerning hexavalent chromium and DFARS 252.225-7007. All deliverables must meet specific packaging and marking standards as outlined in the Statement of Work. The performance of this contract is centered at Robins Air Force Base. Under NAICS code 332722, the supplier is responsible for ensuring all units meet the rigorous technical specifications required for Department of Defense supply chains. The solicitation process concludes with a response deadline of November 6, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Screw Thread Inserts (NSN 5325-01-163-6206)This subcontract involves the supply of 124 screw thread inserts conforming to NSN 5325-01-163-6206 for prime contractors delivering to the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work includes the manufacture or sourcing of these inserts, with the potential use of additive manufacturing methods to meet specifications. The contractor is responsible for ensuring all items are marked for shipment and storage in accordance with MIL-STD-129 and that hazardous material labeling complies with 29 CFR 1910.1200. Performance for this contract is centered in Jacksonville, Florida, under NAICS code 332722.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture and Supply of Screw Thread Inserts (NSN 5325010765513)This subcontract involves the manufacture and supply of 20 certified screw thread inserts, identified by NSN 5325010765513, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. Because these components are designated as Critical Application Items, the manufacturer must utilize precision machining and inspection tools to ensure strict adherence to quality and tolerance standards. The project requires all packaging and marking to be performed in accordance with MIL-STD-129. Performance of the contract will take place in Jefferson City, Missouri, under NAICS code 332722. The response deadline for this requirement is November 6, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Lock Washers (NSN 5310-01-269-2537)This subcontract involves the procurement of 11 units of lock washers conforming to NSN 5310-01-269-2537 for prime contractors supporting DLA supply contracts. The selected source or manufacturer must ensure all items are packaged according to MIL-STD-2073-1E and delivered to the DLA Distribution DDSP New Cumberland Facility. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division and falls under NAICS code 332722. A critical requirement for this engagement is strict compliance with NIST SP 800-171 standards for the secure handling of controlled unclassified information.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Spacer, Sleeve (NSN 5365006240255)This subcontract involves the manufacture or procurement of five sleeve spacer units under NSN 5365006240255 for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. The contractor is responsible for ensuring all hardware meets strict regulatory standards, including MIL-STD-129 for marking and DFARS 252.223-7008 regarding the restriction of hexavalent chromium. To qualify for this contract, the provider must maintain a quality management system compliant with either ISO 9001 or SAE AS9003. The performance of the contract is centered in Albany, and the final deliverables must be properly marked and packaged according to the specified military standards.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Machine Screws (NSN 5305001972389)This subcontract involves the supply of 75 machine screws to prime contractors supporting the Defense Logistics Agency Weapons Support ASC Commodities Division. The required parts are identified by NSN 5305001972389 and Part Piece Number STD P/N -08-10B, and must strictly adhere to NAS1101, Revision 14 standards. Delivery is specified as FOB Origin, with the place of performance located in New Cumberland. The agreement mandates strict adherence to federal regulations, specifically requiring compliance with FAR 52.246-2 for quality inspections and DFARS 252.204-7008 regarding safeguarding controls. The contract falls under NAICS code 332722 and was posted on October 29, 2026, with a response deadline of November 6, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Lock Washers (NSN 5310012906247)This subcontract involves the supply of four lock washer units matching NSN 5310012906247 for prime contractors working with the Defense Logistics Agency Weapons Support ASC Supplier Oper OEM Division. The selected provider is responsible for either manufacturing or sourcing the components and ensuring they meet strict quality inspection standards per MIL-STD-1916 or ASQ H1331. All shipments must be packaged in accordance with MIL-STD-129 and MIL-STD-2073-1E. This opportunity falls under NAICS code 332722 and was posted on October 29, 2026, with a response deadline of November 6, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Shoulder Bolt Supplier (NSN 5306-00-991-6416)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the supply of 640 shoulder bolts conforming to NSN 5306-00-991-6416 specifications and the DLA Master List of Technical and Quality Requirements. The items must be packaged according to ASTM D3951 using domestic materials and delivered FOB Origin to Cherry Point. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332722. Eligible suppliers must provide a Unique Entity ID and CAGE code, along with certification that no covered defense telecommunications equipment is utilized. The response deadline for this requirement is November 6, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Socket Head Cap ScrewsThis subcontract involves the supply of 332 socket head cap screws under NSN 5305-00-151-8699 for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The items must strictly adhere to NSN material specifications, and the use of additive manufacturing is prohibited unless prior ESA approval is obtained. Delivery is designated as FOB Origin, with the place of performance located in San Diego, California. The contractor is responsible for ensuring all units are packaged according to MIL-STD-2073-1E, marked in accordance with MIL-STD-129, and palletized per RP001. This requirement falls under NAICS code 332722 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Vehicular Component Brackets (NSN 2590016554267)This subcontract involves the procurement or manufacture of four vehicular component brackets for prime contractors supporting the Defense Logistics Agency Weapons Support Land Supplier Operations. The required components must strictly adhere to NSN 2590016554267 and Part Number 12590022 from Birdon America Inc. All deliverables must be packaged according to RP001 and marked in compliance with MIL-STD-129. The contract is managed under NAICS code 332722 and requires strict adherence to cybersecurity standards, specifically DFARS 252.204-7012 and NIST SP 800-171. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

in 10 days

AI Contract Overview

This subcontract involves the manufacture and supply of 14 precision-manufactured machine screws, part number S630NB00FAG14307ANCF1, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The production must strictly adhere to ASME B18.24-2015 and TDP Rev A Gen 1 standards. To ensure quality and compliance, the provider must hold SAE AS9003 or ISO 9001 certification and perform quality control according to MIL-STD-1916 or ASQ H1331. The contract requires specific packaging and labeling protocols following ASTM D3951, MIL-STD-129, and MIL-STD-130N. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 20, 2026, regarding this requirement under NAICS code 332722.

General Info

Supply 14 precision machine screws per ASME standards in New Cumberland, Pennsylvania.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-2810.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SCREW, MACHINE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedOct 12

subcontract

Response DeadlineOct 20

Deadline has passed

Submission Closed

10/20/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Supplies precision-manufactured machine screws for prime contractors on DLA Weapons Support ASC projects. Manufactures part number S630NB00FAG14307ANCF1 per ASME B18.24-2015 and TDP Rev A Gen 1. Performs quality control per MIL-STD-1916 or ASQ H1331 and packaging per ASTM D3951. Requires SAE AS9003 or ISO 9001 certification. Delivers 14 machine screws packaged and labeled per MIL-STD-129 and MIL-STD-130N.