Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Manufacture and Supply of Packing Assemblies (NSN 5330-01-123-2048)

Open

Federal

Response Deadline11/16/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of 75 packing assemblies, identified by NSN 5330-01-123-2048 and part number CEC4981-344-10, for prime contractors supporting DLA Weapons Support Land projects. The work is performed under NAICS code 332710 for the Department of Defense, with the place of performance located in Cherry Point. The contractor must strictly adhere to technical data specifications, ensuring all materials are non-asbestos in compliance with FED-STD-313. Additive manufacturing is explicitly prohibited for this project. Additionally, the supplier is required to provide Safety Data Sheets as mandated by 29 CFR 1910.1200(g) upon delivery of the completed assemblies.

General Info

Manufacture 75 non-asbestos packing assemblies for DoD in Cherry Point, prohibiting additive manufacturing.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

NAICS

332710 - Machine Shops

Place of Performance

CHERRY POINT, NC, 28533-5040, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L3-27-T-2143.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PACKING ASSEMBLY

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 12:00:00 PM ESTin 10 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures and supplies packing assemblies for prime contractors on DLA Weapons Support Land projects. Fabricates 75 units of NSN 5330-01-123-2048 per technical data and P/N CEC4981-344-10. Ensures materials are non-asbestos per FED-STD-313 and prohibits additive manufacturing. Provides Safety Data Sheets per 29 CFR 1910.1200(g). Delivers completed packing assemblies.

Similar Contracts

Same NAICS industry code

Precision Machined Valve Disk (NSN 4820-01-479-4627)

DLA DIST SAN JOAQUIN

POSTED

about 1 hour ago

DEADLINE

Precision CNC Machining of Shouldered Shafts

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

Precision Manufacturing of Grooved Headed PinsThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the precision manufacturing and supply of 6,560 grooved headed pins. These components are designated as Critical Application Items and must be produced in strict accordance with TDP Rev A Gen 1 and specific drawings NR 19200 12579607 Rev C and NR 19204 8448502 Rev F. To ensure compliance with exact tolerances, the manufacturer must utilize precision machining equipment and maintain a valid CAGE code for inspection purposes. The opportunity is categorized as a Total Small Business Set-Aside under NAICS code 332710. Interested parties must respond by November 20, 2026, to support prime contractors delivering these essential parts to the DLA.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Manufacturing of NRP Roller Swaging ComponentsThis subcontract involves the manufacturing of NRP roller swaging components for prime contractors under the Department of Defense, specifically the DLA Weapons Support ASC Supplier OE and AF Div. The scope of work requires precision machining and fabrication using OEM-compliant materials and precision swaging equipment, adhering strictly to approved source specifications or verified alternate functional requirements. The contractor is expected to deliver 40 units annually. To be eligible for this contract, providers must possess a valid CAGE code and a completed Source Approval Request package. The opportunity is categorized under NAICS code 332710, with a response deadline set for December 3, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

VIDEO DISPLAY, AIRCR

Solicitation # SPE4A5-27-T-2698

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 1 hour ago

DEADLINE

STORAGE POSIT DIAGR

Solicitation # SPE4A5-26-T-480C

Solicitation SPE4A5-26-T-480C is a request for quotations issued by the DLA Aviation ASC Supplier Oper OEM Division for the procurement of eight units of a critical application item, specifically Monogram Aerospace Fasteners Inc part number IK4004 (NSN 4920-01-509-3351). The requirement is for a delivery of 152 days after order, with a need ship date of September 7, 2025, and an original required delivery date of February 12, 2026. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to DLA Master List technical and quality requirements, including RA001, RP001, RT001, and various RQ quality standards. Inspection and acceptance will occur at the origin per FAR 52.246-2, with the manufacturer's inspection system required to comply with SAE AS9003 or ISO 9001. Packaging must follow ASTM D3951 and MIL-STD-129, though DLA Master List requirements take precedence. Item Unique Identification is not required, and the material has no shelf life requirement. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 1 hour ago

DEADLINE

INSPECTION TOOL

Solicitation # SPE4A6-27-T-008U

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

PACKING ASSEMBLY

Solicitation # SPE7L3-27-T-2157

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 1 hour ago

DEADLINE

SIZING RING, SEAL, HYDRA

Solicitation # SPE7M1-27-T-2346

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

Ruggedized Enclosure FabricationThis subcontract for Ruggedized Enclosure Fabrication involves the production of outer housings, chassis, and bezels for prime contractors supporting DLA Aviation projects. The scope of work includes CNC machining, casting, and forming using aerospace-grade aluminum or composites, followed by the application of specialized finishes such as chemical conversion coating and anodizing in accordance with the Technical Data Package. The selected provider is responsible for delivering finished ruggedized enclosures along with all necessary material, finish, and dimensional certifications. This opportunity is managed under the Department of Defense through DLA Aviation at Philadelphia, with a response deadline set for December 7, 2026.

Pa DLA Aviation At Philadelphia

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Aerospace Polyurethane and Corrosion CoatingThis subcontract for the Department of Defense, specifically Pa DLA Aviation At Philadelphia, involves specialized interior and exterior painting and corrosion prevention for two Drag Beams. The scope of work requires the application of two coats of Gloss Polyurethane MIL-PRF-85285 in Color 17925 and one coat of Fluid Film NAS per SS8536 to interior bores, along with one coat of MIL-PRF-85285 in Color 36118 for the exterior surfaces. All masking must be performed in accordance with SAC Drawing 70250-32105. To be eligible for this project, contractors must hold either an ISO 9001 or SAE AS9100 certification. The opportunity falls under NAICS code 332710 and was posted on November 6, 2026, with a response deadline of November 16, 2026.

Pa DLA Aviation At Philadelphia

POSTED

about 6 hours ago

DEADLINE

Replacement Parts for Servocylinder AssembliesThis subcontract involves the manufacture and supply of new, precision-machined replacement components for servocylinder assemblies supporting NAVSUP Weapon Systems Support projects. The scope of work includes the production of internal cylinder components, seals, and housings utilizing CNC machining and precision grinding. All parts must be fabricated from high-grade aerospace or hydraulic alloys in strict accordance with OEM specifications and FAR 52.211-5. To ensure quality and compliance, the contractor must maintain ISO 9001 or AS9100 certification and provide mill test reports for all metals used in production. This opportunity falls under NAICS code 332710 and is managed through the Department of Defense. Interested parties must submit their responses by December 7, 2026.

Navsup Weapon Systems Support

POSTED

about 6 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

MIL-SPEC Packaging and Marking Services

Freight Transportation Arrangement

POSTED

about 1 hour ago

DEADLINE

Control Cable Assembly Manufacturer

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

SEAL RING, METAL

Solicitation # SPE7L3-27-T-2394

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

PACKING, PREFORMED

Solicitation # SPE7L3-27-T-2172

Solicitation SPE7L3-27-T-2172, issued by DLA Weapons Support Land Supplier Opns Vehicle Spt, is for the procurement of three units of preformed packing under NSN 5330-01-400-0422. The contract specifies a delivery timeframe of 168 days after award, with a need ship date of May 4, 2027, and a final delivery date of August 11, 2027. Delivery is set for FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The tooling for the manufacture of these items is owned by and located at the OEM's approved distributor, Markell (CAGE 9Z331). Strict material and quality standards apply, including a total prohibition on asbestos and the intentional addition of mercury or mercury compounds, except for specific functional exceptions. To prevent deterioration from ultraviolet rays, the items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA requirement RP001. The contract is subject to destination inspection and acceptance, and all payment processing must be handled electronically via the Wide Area WorkFlow (WAWF) system.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE7L3-27-T-2263

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE7L3-27-T-2080

This solicitation, issued by the DLA Weapons Support Land Supplier Operations Vehicle Support, is a Request for Quotations for 691 synthetic rubber gaskets under NSN 5330-00-656-2308. The items are designated as critical application items requiring source inspection and must adhere to specific technical drawings and synthetic rubber specifications. The contract mandates a non-extendable shelf life of 120 months and strictly prohibits the use of asbestos, class I ozone-depleting chemicals, and intentionally added mercury. Delivery is required within 168 days after order, with the destination point at DLA Distribution Cherry Point, North Carolina. Packaging must comply with MIL-STD-2073-1E and RP001, specifically requiring the end items to be sealed in medium duty, waterproof, greaseproof, opaque bags to prevent deterioration from ultraviolet rays. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan for acceptance. The procurement is conducted under full and open competition for commercial items, utilizing the Wide Area WorkFlow system for invoicing and payment.

Support Activities for Coal Mining

POSTED

about 1 hour ago

DEADLINE

SEAL, NONMETALLIC SPECI

Solicitation # SPE7L3-27-T-2348

Solicitation SPE7L3-27-T-2348 is a request from the Defense Logistics Agency for 130 nonmetallic special shaped section seals (NSN 5330-01-211-7747). This is a Navy Identified Critical Safety Item with a required delivery timeline of 31 days after order. The acquisition is categorized under NAICS 339991 and may be eligible for automated award. Delivery is FOB Origin, with inspection and acceptance also occurring at the origin. Offerors must comply with strict packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. Due to UV sensitivity, items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Quality management systems must comply with SAE AS9100. The solicitation mandates adherence to the Berry Amendment and Buy American Act, and prohibits the use of additive manufacturing unless specifically authorized. All quotes must be submitted via the DIBBS portal, and contractors are required to register through the Account Management and Provisioning System (AMPS) to access the Vendor Shipment Module.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

BRAKE BOOSTER ASSEMBLY

Solicitation # SPE7L3-27-T-2167

Motor Vehicle Brake System Manufacturing

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE7L3-27-T-2369

Solicitation SPE7L3-27-T-2369 is a procurement request from the Defense Logistics Agency (DLA) for 95 gaskets under National Stock Number 5330-01-484-8996. The contract is issued under the First Destination Transportation program with delivery required to DLA Distribution San Joaquin in Tracy, California, within 168 days after order. The procurement is subject to strict export controls under ITAR and EAR, requiring offerors to possess an approved US/Canada Joint Certification Program certification and DLA authorization to access technical data. Technical requirements include a manufacturer inspection system compliant with SAE AS9003 or ISO 9001. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, specifically requiring the items to be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent UV deterioration. Quality assurance is governed by a zero-based sampling plan, with specific verification levels for critical, major, and minor attributes. Administrative compliance requires the use of the Wide Area WorkFlow system for invoicing and adherence to various DFARS and FAR clauses, including Buy American and cybersecurity reporting requirements.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE7L3-27-T-2206

Solicitation SPE7L3-27-T-2206 is a small business set-aside procurement issued by the Defense Logistics Agency Weapons Support Land Supplier Operations for the supply of 37 gaskets under National Stock Number 5330-01-413-2126. The acquisition is conducted under the First Destination Transportation program with a required delivery period of 168 days after order, with a need ship date of May 4, 2027, and a final delivery date of August 25, 2027. The items are to be delivered FOB Destination to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict quality and material standards, specifically requiring that all supplied gaskets be free of asbestos. Due to the risk of deterioration from ultraviolet rays, the end items must be packaged and sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1. Identification marking must comply with MIL-STD-130N, and general marking must follow MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment, and the contract incorporates various DFARS and FAR clauses regarding cybersecurity, safeguarding covered defense information, and domestic material restrictions.

Aircraft Manufacturing

POSTED

about 1 hour ago

DEADLINE

LEVER, MANUAL CONTROL

Solicitation # SPE7L3-27-T-2301

Solicitation SPE7L3-27-T-2301, issued by the DLA Weapons Support Land Supplier Operations Vehicle Support, is for the procurement of 29 manual control levers (NSN 3040-17-115-2911). The contract specifies a delivery timeline of 132 days after order, with a need ship date of March 29, 2027, and a required delivery date of April 23, 2027. Shipping is designated as FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance are both required at the destination per FAR 52.246-2. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Technical requirements include a prohibition on the use of additive manufacturing without authorization and strict restrictions on the use of mercury, except for specific NAVSEA-approved functional applications. Administrative requirements mandate the use of the Wide Area WorkFlow (WAWF) system for invoicing and receiving reports. Additionally, the contract incorporates several FAR and DFARS clauses regarding equal opportunity, cybersecurity reporting, the Buy American Act, and the prohibition of covered defense telecommunications equipment.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

WINDOW, VEHICULAR

Solicitation # SPE7L3-27-T-1377

Solicitation SPE7L3-27-T-1377 is a Request for Quotations issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the procurement of four vehicular windows, specifically JLG Industries part number 2480086, under NSN 2510-01-572-4878. This is not a small business set-aside, and the acquisition falls under NAICS code 332999. The required delivery date is February 12, 2027, with a delivery timeframe of 98 days after the order is placed. Delivery is set for FOB Origin, with the destination being DLA Distribution Red River in Texarkana, Texas. The contract mandates strict adherence to DLA packaging requirements RP001 and MIL-STD-129, with packaging following ASTM D3951. Inspection and acceptance will occur at the destination per FAR 52.246-2. Key regulatory requirements include the Buy American and Balance of Payments Program (DFARS 252.225-7001), the Berry Amendment, and the Hazard Communication Standard for any hazardous materials. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Offers produced via additive manufacturing are ineligible for award, and the government may apply a HUBZone price evaluation preference.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Precision Machining and Assembly of Valve Housing Assemblies

POSTED

DEADLINE

Seal Retainer Supply

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Manufacturing of Mechanical Drive Housing (NSN 3040-01-644-8602)

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Precision Component Supply for Coupling Assemblies

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Manufacturing of Packing Retainers (NSN 5330-01-312-7380)

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Manufacture of Compensator Housings (NSN 1650-00-332-6816)

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Manufacture of Window Retaining Plates (NSN 5340-01-705-9076)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacturer of Valve Seat Rings (NSN 4820-00-952-4780)

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Filter Housing and Hardware Fabricator

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Manufacturing and Supply of Cylinder Caps (NSN 1710004767192)

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Serrated Lock Ring Manufacturing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Manufacturing of Plug, Output Shaft, Actuator (P/N 42357-73)

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS