Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Manufacture and Supply of Retainer, Packing (NSN: 5330007580791)

Active

Federal

Response Deadline08/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture and delivery of 43 units of a military-spec retainer, packing component identified by NSN 5330007580791, with strict adherence to federal packaging and marking regulations, as well as domestic manufacturing requirements under the Berry Amendment. All work must be performed in the United States to ensure compliance with defense procurement standards for domestically produced supplies. The item is intended for use by the Department of Defense under the Land Supplier Operations Vehicle Support organization, with performance located in Texarkana, Texas, 75507-5000. The solicitation is designated as a subcontract opportunity, posted on August 3, 2026, with responses due by August 14, 2026, and is governed under NAICS code 339991 for other miscellaneous manufacturing. Potential bidders must meet all federal compliance obligations and ensure full traceability and documentation of materials and production processes.

General Info

Manufacture and deliver 43 military retainer units in the U.S. under Berry Amendment, due August 14, 2026.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

TEXARKANA, TX, 75507-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Production and delivery of 43 units of a military-spec retainer, packing component requiring compliance with federal packaging, marking, and domestic manufacturing standards.

Similar Contracts

Same NAICS industry code

Supply of Sealed Plain Encased ComponentsThe contract solicits the manufacture or sourcing of 2,907 units of SEAL, PLAIN ENCASED with the National Stock Number 5330-01-481-0888, requiring full compliance with military packaging standards, hazardous materials regulations, and proper marking protocols for delivery throughout the continental United States. The effort is structured as a subcontract under a Total Small Business Set-Aside classification, ensuring eligibility and participation exclusively by small businesses as defined by the SBA, with the NAICS code 339991 confirming the classification under Other Miscellaneous Manufacturing. All work must meet strict Defense Department specifications for quality, handling, and documentation. The solicitation was posted on August 3, 2026, with responses due by August 18, 2026, and is issued by the Strategic Acquisitions Program Directorate under the Department of Defense. While no specific point of contact or physical delivery location is provided, performance is restricted to CONUS and must adhere to all logistical and regulatory requirements associated with federal military supply chains. The contract opportunity is accessible via the DIBBS platform, and bidders must ensure alignment with federal acquisition regulations, including packaging, labeling, and hazardous material handling protocols, to be considered for award.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7L3-26-T-127E

This contract is for the procurement of a gasket, identified by NSN 5330-01-258-2599 and part number 962M, with a quantity of 115 units, to be delivered FOB origin within 110 days of contract award. The item is designated as a critical application component and must comply strictly with DLA packaging and technical requirements, including adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for procurement packaging standards. The supply must be sealed in a medium-duty, waterproof, greaseproof, opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, especially for direct vendor deliveries, foreign military sales, and stock shipments. The contract prohibits intentional addition of mercury or mercury-containing compounds except in specific functional applications like batteries, fluorescent lamps, sensors, and weapon systems, with additional containment and shock-proof requirements for portable items, as defined by NAVSEA 5100-003D. Asbestos is strictly forbidden under FED-STD-313 definitions. Delivery must be made to the DLA Distribution center in New Cumberland, Pennsylvania, following all hazardous material shipping protocols outlined in DLAD Proc Note C19 and C20. The unit price is $115.00 per unit, totaling $13,225.00, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must include the specified packing methods and containment codes. The solicitation number is SPE7L3-26-T-127E, with a response deadline of August 3, 2026, and a need ship date of November 22, 2026, and original delivery completion by December 31, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in RA001.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7L3-26-T-125S

The contract pertains to the procurement of a gasket with NSN 5330-01-479-9408 and part number 032757, requiring a quantity of 28 units to be delivered FOB origin within 106 days, with no variance allowed in quantity. Delivery must be made to the DLA Distribution facility in New Cumberland, Pennsylvania, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1, ensuring the item is sealed in a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV exposure. Marking follows MIL-STD-129 with the special instruction “Do not bend,” and palletization adheres to DLA packaging standards. The item is designated as a critical application item, and all technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Transportation instructions are governed by DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE7L3-26-T-125S, with a response deadline of August 3, 2026, and the required ship date is November 18, 2026, for an original delivery requirement of December 20, 2026. Unit of issue is each, priced at $28.00 per unit, with a total contract value of $784. The point of contact is Susan Diamond, reachable at DLA email and phone provided.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7M4-26-T-299A

The contract pertains to the procurement of three O-rings with the NSN 5331-01-134-0614 under solicitation SPE7M4-26-T-299A, with a required delivery within 157 days of award. The O-rings must comply with strict dimensional tolerances, including a maximum outside diameter not exceeding 0.225 inches, and all measurements must be performed using optical methods. The item is subject to Component Qualified Products Lists (QPL) or Qualified Manufacturers Lists (QML) under Procurement Note H02, requiring suppliers to be qualified on an approved list. Packaging must adhere to DLA packaging standards, and all technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date based on acquisition type. The contract mandates compliance with cybersecurity standards as defined by CMMC Level 2 for third-party assessment organizations, and the handling of Covered Defense Information applies. Export control restrictions are in effect due to the sensitivity of technical data, which is subject to ITAR or EAR regulations; disclosure to foreign persons, including those within the U.S., requires prior government authorization, and only contractors with approved US/Canada Joint Certification Program certification and completed DLA training on export-controlled data may access it. Government identification must be removed from non-accepted supplies, and full and open competition is authorized. The procurement is for a federal agency under the Department of Defense, with performance located in Texarkana, and primary point of contact is Blake Tushar.

FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

PACKING WITH RETAIN

Solicitation # SPE7L1-26-T-908C

The contract pertains to the procurement of packing with retainer, identified by NSN 5330-00-202-2815, with a quantity of 122 units, under solicitation number SPE7L1-26-T-908C. The item is classified as a commercial item and must comply with the DLA Packaging Requirements for Procurement, incorporating technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The use of asbestos as defined in FED-STD-313 is strictly prohibited. Packaging and delivery must adhere to specified government guidelines, including the removal of government identification from non-accepted supplies. The place of performance is Hill AFB, Utah, with a delivery requirement of 48 days after award. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, and is managed by the Department of Defense’s Land Supply Chain under NAICS code 339991. Primary point of contact is Kallie Regula, reachable via email and phone.

LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-907C

The contract is for one roll of rubber strip, each roll measuring 50 feet, under the national stock number 5330-01-651-7290, with a purchase request number 7017709123. The item must be packaged and sealed in a medium duty, waterproof, greaseproof, and opaque bag in compliance with MIL-DTL-117, Type II, Class C, Style 1, to protect against ultraviolet degradation, and this packaging requirement applies to direct vendor delivery, foreign military sales, and stock shipments. The rubber strip must be free of asbestos, and any substituted material must be approved per Clause L30 and Provision 4 conditions. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions unless amended. The item falls under federal supply classifications 5330/5331 and must adhere to MIL-STD-130N for identification marking of U.S. military property. Covered defense information may apply, and government identification must be removed from non-accepted supplies. The solicitation number is SPE7L1-26-T-907C, with a response deadline of August 14, 2026, and delivery is required within 20 days after award. The contract is issued by the Department of Defense’s Land Supply Chain under NAICS code 339991, with the place of performance listed as FPO, ZIP 96660, and primary point of contact is Kristina Derry at krisitna.derry@dla.mil.

LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

SEAL, PLAIN ENCASED

Solicitation # SPE7LX-26-U-9140

The contract pertains to the procurement of 2,907 units of SEAL, PLAIN ENCASED under solicitation SPE7LX-26-U-9140, with a total small business set-aside and a NAICS code of 339991. Delivery is required within 57 days after order, and the item is identified by NSN 5330-01-481-0888. All items must be free of asbestos, and any alternatives must comply with Clause L30 and Provision 4 conditions. Packaging must adhere to MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. The item must also comply with MIL-STD-130N for identification marking of U.S. military property. Technical and quality requirements referenced by R or I numbers are controlled by the DLA Master List, with revisions governed by the solicitation issue date for simplified acquisitions or amendment date if changed. Covered defense information provisions apply, and government identification must be removed from non-accepted supplies per RQ011. Packaging requirements are dictated by DLA standards, and all deliveries must meet these specifications regardless of shipment type. The point of contact is Theodore Misiolek, reachable via phone and email, with responses due by August 18, 2026, and the solicitation posted on August 3, 2026.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-909T

This contract specifies the procurement of O-RINGs under solicitation SPE7L1-26-T-909T, with a requirement for 14 units to be delivered within 16 days to the DLA Distribution facility in New Cumberland, Pennsylvania. The item, identified by NSN 5331-99-710-6545, is classified as a critical application item with a non-extendable shelf life of 120 months and must not have a cure date more than three years prior to delivery. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with all containers marked with a “USE BY” date 10 years from the cure date in month/year format. The product is subject to strict material prohibitions, including the ban on ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except for approved exceptions such as functional components in batteries, lighting, instruments, or weapon systems specified by NAVSEA. Traceability documentation must be retained by the contractor in accordance with DLA Directive Procurement Note C03, and all supplies must be packaged in opaque, waterproof, greaseproof bags as per MIL-DTL-117, Type II, Class C, Style 1 for UV protection. Only approved suppliers with specific part numbers are authorized, and all items must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. Delivery is FOB origin with zero variance allowed, inspection and acceptance occur at destination, and the contract includes requirements for shipping, marking, and transportation per DLA Procurement Notes C19 and C20.

LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

PARTS KIT, SEAL REPL

Solicitation # SPE7L3-26-T-145R

The contract is for a Parts Kit, Seal Replacement, identified by NSN 5330-01-698-6493, with a quantity of one unit and a delivery requirement of 20 days after order. The solicitation number is SPE7L3-26-T-145R, issued by the Department of Defense's Land Supplier Operations Vehicle Support agency, with performance required in San Diego, California, 92136-3581. All materials must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must adhere to MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, opaque bag to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. The contract prohibits the use of class I ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, with limited exceptions for functional uses in batteries, fluorescent lights, specified instruments, weapon systems, and chemical reagents approved by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and include a secondary containment barrier as specified by NAVSEA 5100-003D. Asbestos is strictly forbidden in all supplied items, and any alternatives require formal approval under Clause L30 and Provision 4 conditions. Government identification must be removed from non-accepted supplies, and all packaging must meet DLA procurement requirements. The solicitation closes on August 14, 2026, with Susan Diamond as the primary point of contact via email and phone.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7LX-26-U-9174

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 16 hours ago

DEADLINE

PACKING, PREFORMED

Solicitation # SPE7L3-26-T-125J

The contract specifies the procurement of 17 units of a preformed sealing product identified by NSN 5330-00-869-4256 and part number CC1162-5, furnished by Cornell-Carr Co Inc located in Monroe, CT. The item must comply with strict material restrictions, including a complete prohibition of asbestos as defined in Fed-Std-313 and the deliberate exclusion of mercury or mercury-containing compounds from direct contact with the hardware, except for specific functional applications such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical analysis reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and equipped with a secondary containment barrier to prevent mercury leakage, in accordance with NAVSEA 5100-003D. Compliance with all technical and quality requirements listed under R and I numbers in the DLA Master List of Technical and Quality Requirements is mandatory, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The packaging and handling of non-accepted supplies must include removal of all government identification marks. The solicitation, identified as SPE7L3-26-T-125J, was posted on July 23, 2026, with responses due by August 3, 2026, and delivery is required within 168 days after order placement, with performance taking place in Tracy, CA, 95304-5000. The contracting office is under the Department of Defense, Land Supplier Operations Vehicle Support, and inquiries should be directed to Susan Diamond via the provided contact information.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-909R

LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

Hazardous Materials Compliance and LabelingThis contract requires the provision of globally harmonized system compliant safety data sheets, hazard warning labels, and MIL-STD-129 marking for hazardous materials used in shipment and storage, ensuring full alignment with Defense Federal Acquisition Regulation Supplement and Defense Logistics Agency mandates. All deliverables must meet stringent military standards for labeling and documentation to support safe handling, transport, and long-term storage of hazardous commodities within DOD supply chains. The work is performance-based and tied to a specific location in Jacksonville with a ZIP code of 32212-0103, and the solicitation falls under NAICS code 541690 for other scientific and technical consulting services. It is structured as a subcontract with a response deadline of August 14, 2026, and was posted on August 3, 2026. Compliance with DFARS and DLA requirements is mandatory, and all materials must be accurately marked and documented for traceability and safety throughout the logistics lifecycle.

Other Scientific and Technical Consulting Services

POSTED

about 16 hours ago

DEADLINE

Military-Grade Packaging and PalletizationThe contract requires the delivery of packaging gaskets that meet stringent military specifications, specifically MIL-DTL-117, TYPE II, CLASS C, STYLE 1, ensuring they are sealed in waterproof, greaseproof, and UV-resistant bags to withstand harsh environmental conditions. These gaskets must be precisely packaged to maintain integrity during storage and transit, with strict adherence to material and sealing standards defined by the military. All shipments must also be palletized in accordance with DLA RP001 logistics standards, ensuring uniform size, weight distribution, labeling, and secure strapping for efficient handling within defense supply chains. The packaging and palletizing process must support seamless integration into military logistics systems and enable rapid deployment. This subcontract is issued under NAICS code 323113, indicating it relates to printing and related support activities, though the core scope focuses on specialized packaging and material handling for defense components. The opportunity was posted on August 3, 2026, with bids due by August 14, 2026, and performance is expected to be delivered to Jacksonville, Florida, at ZIP code 32212-0103. The contract is managed by the Department of Defense under the Land Supplier Operations Vehicle Support office, highlighting its importance to vehicle and equipment readiness. Compliance with all technical, logistical, and quality requirements is mandatory, and failure to meet the specified standards could result in rejection of deliverables.

Commercial Screen Printing

POSTED

about 16 hours ago

DEADLINE

Precision Gasket ManufacturingThe contract requires the precise manufacturing of a critical application gasket to meet stringent technical specifications, including the use of a designated material composition identified as H.B. Fuller 81702 with part number FCA25751, adherence to strict dimensional tolerances, and full compliance with applicable military standards. The gasket is intended for use in high-performance environments where reliability and precision are essential, and all production must align with the defined technical requirements to ensure operational integrity. Issued as a subcontract under the NAICS code 332996 by the Department of Defense through the LAND SUPPLIER OPNS VEHICLE SPT organization, the opportunity is open for response until August 14, 2026, with the work to be performed at a specified location in Jacksonville, Florida, zip code 32212-0103. The solicitation, accessible via the DIBBS platform, does not specify a set-aside type, and all interested parties must submit proposals before the deadline to be considered for award.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 16 hours ago

DEADLINE

Cybersecurity Compliance for Covered Defense Information (CDI)The contract requires implementation of cybersecurity measures to protect Covered Defense Information in accordance with NIST Special Publication 800-171, ensuring all systems handling such data meet strict federal security standards. Compliance includes adopting required security controls, maintaining documentation of implementation, and establishing processes to detect, report, and respond to cyber incidents as mandated by DFARS clauses. Failure to meet these requirements may result in contract non-compliance and potential penalties. The work is to be performed in San Diego, California, with a response deadline of August 14, 2026, and is classified as a subcontract under NAICS code 541512, indicating it involves computer systems design services for the Department of Defense. The contractor must ensure all cyber incident reporting procedures are operational and aligned with DoD expectations, with no flexibility in meeting the technical and procedural obligations outlined.

Computer Systems Design Services

POSTED

about 16 hours ago

DEADLINE

Hazardous Materials Compliance and Documentation ServicesThe contract requires the provision of hazard warning labels, Safety Data Sheets, and regulatory compliance documentation for all hazardous components included in a parts kit, ensuring adherence to applicable safety and environmental regulations. The work is scoped for a subcontract under the Department of Defense, with the place of performance specified as San Diego, California, 92136-3581, and the NAICS code 541690 indicates it falls under other professional, scientific, and technical services, specifically environmental and compliance-related consulting. All deliverables must accurately reflect the chemical and physical hazards of the materials in the kit and comply with international, federal, and defense-specific standards for labeling and documentation. The solicitation was posted on August 3, 2026, with a response deadline of August 14, 2026, and is administered through the Defense Logistics Agency’s DIBBS system. The contracting entity, LAND SUPPLIER OPNS VEHICLE SPT, operates within the broader Department of Defense supply chain framework, emphasizing the critical need for precise, timely, and legally compliant documentation to support safe handling, storage, transport, and use of hazardous materials in military equipment. Failure to provide complete and correct documentation may result in rejection of the parts kit and non-compliance penalties, making accuracy and regulatory alignment the primary focus of the subcontractor’s deliverables.

Other Scientific and Technical Consulting Services

POSTED

about 16 hours ago

DEADLINE

Seal Replacement Parts Kit Manufacturing and SupplyThe contract entails the manufacture and delivery of a seal replacement parts kit identified by NSN 5330-01-698-6493, requiring full compliance with Department of Defense technical specifications, packaging requirements, and material safety standards. All products must be produced and assembled to meet stringent military-grade criteria to ensure performance, durability, and safety in operational environments. The work is to be performed in San Diego, California, with delivery scheduled to support Land Supplier Operations Vehicle Support initiatives under the Department of Defense. This is a subcontract opportunity posted on August 3, 2026, with a response deadline of August 14, 2026, and is categorized under NAICS code 332998 for other fabricated metal product manufacturing. The procurement is managed by the Department of Defense through its Land Supplier Operations Vehicle Support organization, and the place of performance is fixed at the specified San Diego location. All bidders must align with DLA’s compliance frameworks and ensure that both the parts and their packaging meet federal defense logistics requirements without exception.

Enameled Iron and Metal Sanitary Ware Manufacturing

POSTED

about 16 hours ago

DEADLINE

Gasket Supply for Defense ApplicationsContract calls for the supply of 182 specialized asbestos-free gaskets designated by NSN 5330015162090, engineered to meet military specifications for use in defense and naval systems. Each unit must be manufactured, packaged, and labeled in full compliance with federal standards for hazardous materials, including the submission of complete safety data sheets and military-compliant packaging to ensure safe handling and transportation. The gaskets are intended for performance at a designated location in Tracy, California, with a zip code of 95304-5000, and the contract is structured as a subcontract under the Department of Defense’s Land Supplier Operations Vehicle Support. The solicitation, identified by the DIBBS link and posted on August 3, 2026, requires responses to be submitted no later than August 14, 2026, with NAICS code 332994 indicating the classification within miscellaneous fabricated metal product manufacturing. All deliverables must align precisely with defense procurement requirements to ensure seamless integration into operational platforms.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 16 hours ago

DEADLINE

WHEEL ASSEMBLY, PNEUMAT

Solicitation # SPE7L3-26-T-146B

The contract pertains to the procurement of a pneumatic tire wheel assembly identified by NSN 2530-01-092-8482 and part number 7017602466, with a quantity of 33 units to be delivered FOB origin within 157 days of contract award. The item is classified as a critical application component and must conform precisely to source-controlled engineering drawings and technical specifications referenced in the DLA Master List of Technical and Quality Requirements, including revisions dated through 2025. All manufacturing and inspection activities must comply with stringent quality standards such as MIL-STD-1916 or ASQ H1331, mandating zero non-conformances for critical and major attributes, with acceptance verified at origin. The supplier is required to adhere to DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129R for marking and labeling, with specific preservation and packaging instructions outlined in SPI AK00000001 Rev D. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, and covered defense information protocols apply. Configuration changes require formal engineering change proposals and variance requests, and no government identification may be removed from non-accepted supplies. Packaging must be palletized per DLA requirements, and delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with no variance permitted in quantity. The solicitation closed on August 14, 2026, with a required ship date of January 19, 2027, and an original delivery deadline of March 20, 2027.

Other Motor Vehicle Parts Manufacturing

POSTED

about 16 hours ago

DEADLINE

INSTALLATION KIT, VEHIC

Solicitation # SPE7L3-26-T-124W

This contract is for the supply of an Installation Kit, Vehicular Equipment identified by NSN 2510-01-673-1162 and part number 0385000112-00, with a quantity of 15 units to be delivered FOB origin under solicitation SPE7L3-26-T-124W. The delivery deadline is 177 days from contract award, with an original required delivery date of October 14, 2026, and a needed ship date of January 28, 2027. Each unit is priced at $15.00, totaling a contract value of $225.00, with zero tolerance for quantity variance. All items must comply with strict packaging standards outlined in MIL-STD-2073-1E Appendix D for kits, and marking must adhere to MIL-STD-129. The kit is designated as a critical application item, and the use of Class I ozone-depleting chemicals is strictly prohibited, superseding any conflicting specification requirements unless explicitly authorized. Packaging must follow DLA-specific requirements, and the delivery destination is the Central Receiving Warehouse at DLA Distribution Barstow, California. Preservation and packaging methods, including wrap and cushioning materials, are to be specified as ZZ per the contract’s packaging data. The item must be shipped to the provided postal address with no deviations allowed, and all transportation logistics must follow referenced DLAD procedures. The contract is issued under DLA’s authorized unit of issue, and technical and quality requirements linked via R or I numbers are governed by the DLA Master List effective on the solicitation or award date, depending on procurement type.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

GOVERNMENT FIRST ARTIC

Solicitation # SPE7L3-26-Q-1247

The contract is for the procurement of 47 units of a door, hatch, or vehicle component manufactured through a metal casting process, requiring specialized tooling for production. The item is classified as a ballistic item, necessitating a first article test and a Certificate of Quality Conformance in accordance with SQAP013408919. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. The item is subject to DLA packaging standards and strict prohibitions against the use of Class I ozone-depleting chemicals, which override any conflicting specification requirements; alternative chemicals must be submitted for approval unless explicitly authorized. This is a total small business set-aside under NAICS code 336211 with full and open competition among qualified small businesses. The contract involves export-controlled technical data governed by either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location and requiring strict compliance with DFARS 252.225-7048. Access to this data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and approved authorization from DLA. Packaging and handling must comply with DLA standards, and any non-accepted supplies must have government identification removed. The delivery timeline is 184 days after order, with the solicitation closing on August 18, 2026, and the point of contact for inquiries is McKenzie Biniker of the Department of Defense’s Land Supplier Operations Vehicle Support.

Motor Vehicle Body Manufacturing

POSTED

about 16 hours ago

DEADLINE