Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Manufacture and Supply of Self-Locking Plate Nuts

Active

Federal

Response Deadline11/04/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of 44 self-locking plate nuts, specifically part number MS21250L4, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The fabrication process must strictly adhere to NASM21050 Rev 2 and Reference QAP 13873, with mandatory markings per MIL-STD-130N and packaging compliant with ASTM D3951 and MIL-STD-129. A Certificate of Quality Compliance is required upon delivery. The contractor must maintain compliance with NIST SP 800-171 and adhere to the Buy American Act. Performance for this contract is based in North Kingstown, and the procurement falls under NAICS code 332722.

General Info

Manufacture and supply 44 self-locking plate nuts per NASM21050 and MIL-STD-130N specifications.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

NORTH KINGSTOWN, RI, 02852-7538, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-7172.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NUT, SELF-LOCKING, PLATE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 27

subcontract

Response DeadlineNov 4

Submission deadline

Response Deadline

11/04/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies self-locking plate nuts for prime contractors delivering DLA supply contracts. Fabricates nuts per NASM21050 (Rev 2) and Reference QAP 13873. Applies markings per MIL-STD-130N and packs per ASTM D3951 and MIL-STD-129. Requires NIST SP 800-171 compliance and Buy American Act adherence. Delivers 44 units of Part Number MS21250L4 (NSN 5310-00-782-0008) and a Certificate of Quality Compliance.

Similar Contracts

Same NAICS industry code

HARDWARE (HEX HEAD CAPSCREWS & BOLTS)

Solicitation # SPMYM327Q2002

The Portsmouth Naval Shipyard, under DLA Maritime, is soliciting quotes for various commercial hardware items, specifically hex head capscrews and heavy hex bolts, under solicitation SPMYM327Q2002. The requirement includes specific items such as 5/8-11UNC-2A capscrews, zinc-coated self-locking capscrews, and heavy hex bolts conforming to standards including ASTM A193 B16, ASTM B633 Type-2, MIL-DTL-18240 Type-N, and QQ-N-286G. This procurement is a 100% Small Business Set-Aside under NAICS code 332722. The government required delivery date is December 3, 2026, with shipping terms set as FOB Destination. Award will be based on the Lowest Price Technically Acceptable (LPTA) criteria. Offerors must be active in the System for Award Management (SAM) and provide CMMC unique identifiers if applicable. Strict packaging and marking requirements are in place, mandating compliance with MIL-STD-129 for military items and ASTM D-3951 for commercial items, while prohibiting the use of asbestos and loose fill polystyrene. Quality evidence, including test results and material certifications, must accompany each package. Invoices are to be submitted via Wide Area Workflow (WAWF) with payment terms of Net 30 days after material acceptance. Quotes are due by November 4, 2026, at 11:00 AM EST.

DLA Maritime - Portsmouth

POSTED

about 2 hours ago

DEADLINE

Solicitation # N0010426QFG16

This contract specifies the procurement of machine bolts designated as Special Emphasis Level I material for use in critical shipboard systems, where failure could result in catastrophic consequences including loss of life or ship. The bolts must comply with Leslie Controls Inc. drawing 21844N and material specification ASTM-A193 Grade B7, with stringent requirements for traceability, chemical and mechanical testing, and certification. Each production lot requires quantitative analysis, wedge tensile testing, and nondestructive inspection via liquid penetrant or magnetic particle methods, all governed by MIL-DTL-1222 and other referenced standards such as ASTM-F606, FED-STD-H28, and ISO-9001. Traceability must be maintained from raw material through final inspection via unique heat-lot markings applied per MIL-STD-792, and certification reports must be 100% complete, unqualified, and directly linked to each item's marking without transcription. All deliveries require submission of certification data through WAWF to Portsmouth Naval Shipyard (N50286) for prior approval, with no material allowed to ship until acceptance is granted. The contractor must maintain an ISO-9001 or MIL-I-45208 quality system with calibration compliance to ISO-10012 or ANSI-Z540.3, subject to government audit at source. Government Quality Assurance will conduct independent inspections, including 100% verification of traceability, documentation legibility, and compliance with all contractual specifications. Subcontractors are bound by the same requirements and must be vetted, monitored, and audited by the prime contractor. The contract mandates zero-defect acceptance for final inspection, prohibits mercury or unauthorized modifications, and enforces strict configuration control with formal Engineering Change Proposals required for any alterations. All documentation must be submitted electronically via ECDS, and waivers or deviations—classified as Critical, Major, or Minor—require explicit Contracting Officer approval. The product must be delivered within 365 days of contract effectiveness, and the warranty extends one year from delivery date. The contract is issued under a Navy-specific small business set-aside and is a DPAS-rated order for national defense use, with full compliance obligations under Buy American and other federal program requirements.

Navsup Weapon Systems Support Mech

POSTED

about 2 hours ago

DEADLINE

SCREW,CAP,HEXAGON H

Solicitation # N0010427QYA45

Navsup Weapon Systems Support Mech

POSTED

about 2 hours ago

DEADLINE

in about 2 months

53--NUT,SELF-LOCKING,HE

Solicitation # N0010425QBV19

Navsup Weapon Systems Support Mech

POSTED

about 2 hours ago

DEADLINE

in about 1 month

53--SCREW,MACHINE

Solicitation # N0010426QYAHV

NAVSUP Weapon Systems Support Mechanicsburg is soliciting the procurement of 71 machine screws for sub antenna systems under NSN 1H-5305-010877548-SQ. This emergency acquisition is intended for a one-year duration with deliveries destined for DLA Distribution centers in New Cumberland, Pennsylvania, and Tracy, California. While the government intends to solicit full and open competition, the current source is identified as the Original Equipment Manufacturer and the only known provider capable of satisfying the requirements due to a lack of government-owned data. The procurement follows FAR Part 15 procedures and includes UID and Buy American requirements. Interested parties must submit capability statements or proposals via electronic procedures on NECO. The solicitation is expected to be issued around September 3, 2026, with a response deadline of October 3, 2026, and an anticipated award date of October 18, 2026. This effort is designated as a total small business set-aside.

Navsup Weapon Systems Support Mech

POSTED

about 2 hours ago

DEADLINE

Electrical Connectors & FastenersThis subcontract for Electrical Connectors and Fasteners supports prime contractors working on Nebraska Public Power District projects. The scope of work involves the delivery of high-conductivity terminals and assembly hardware, specifically solderless compression ring terminals made from copper or aluminum alloy preloaded with non-oxidizing inhibitor. Additionally, the contract requires the provision of stirrups and 18-8 stainless steel assembly bolts equipped with silicon bronze hex nuts. All provided materials must adhere to Build America, Buy America (BABA) compliance standards. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline of November 6, 2026. The contract falls under NAICS code 332722 and focuses on the essential supply of specialized electrical fasteners and connectors for regional power infrastructure.

Nebraska Public Power District

POSTED

about 16 hours ago

DEADLINE

Supply of Round Plain Nuts (NSN 5310-00-839-1524)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, requires the supply of 84 round plain nuts identified by NSN 5310008391524. The hardware must strictly adhere to the DLA Master List of Technical and Quality Requirements and be delivered via FOB Origin to Cherry Point by April 3, 2028. To be eligible, contractors must provide a valid CAGE code and UEI, and they must certify that no covered defense telecommunications equipment is used in accordance with FAR 52.204-24. The opportunity falls under NAICS code 332722, with a response deadline of November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

Supplier of Flat Washers (NSN 5310-01-097-9936)This subcontract involves the procurement of 109 specialized flat washers to support Defense Logistics Agency aircraft component projects. The supplier is responsible for manufacturing or sourcing the components in strict accordance with Sikorsky Aircraft Corporation part number SS5104-01 and NSN 5310-01-097-9936. All items must be delivered to DLA Distribution DDSP New Cumberland. The contract mandates rigorous adherence to quality and regulatory standards, including compliance with the Buy American Act and the Berry Amendment. Packaging must meet ASTM D3951 specifications, while marking and palletization must follow MIL-STD-129 and RP001 guidelines. The opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

Manufacture and Supply of Plain Hexagon Nuts (NSN 5310-00-268-6055)This subcontract involves the manufacture and supply of 492 precision-manufactured plain hexagon nuts, identified by NSN 5310-00-268-6055, for prime contractors supporting DLA Weapons Support ASC projects. The hardware must be produced in strict accordance with NASM316 and FF-N-836F(1) specifications, with a mandatory requirement for zero mercury content and bare item marking compliant with MIL-STD-130N. The selected provider must adhere to the Buy American Act and provide a Certificate of Quality Compliance for the shipment. Delivery of the components is designated as FOB Origin to DLA Distribution Cherry Point, North Carolina. This procurement falls under NAICS code 332722 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

Close Tolerance Screw Manufacturing (NAS7802U3)This subcontract involves the manufacture of 116 close tolerance screws, part number NAS7802U3, for the DLA Weapons Support ASC Commodities Division. The fabrication process requires precision CNC machining in strict accordance with National Aerospace Standard 80205 and TDP Rev A Gen 1. Quality control must be maintained through sampling per MIL-STD-1916 or ASQ H1331, and the final products must adhere to Buy American requirements and MIL-STD-2073-1E packaging standards. The project is categorized under NAICS code 332722 and will be performed in New Cumberland. Interested parties should note the response deadline of November 5, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

Supply of Multiple Angle Sensor BracketsThis subcontract with the Department of Defense, specifically the DLA Weapons Support Land Supply Chain, involves the manufacture or procurement of Multiple Angle Sensor Brackets under NSN 5340016076959. The contractor is responsible for supplying 12 units of these specialized hardware brackets to prime contractors, with a strict delivery requirement of 5 days from the date of order. Performance for this contract is based in Anniston. Compliance with specific military and industry standards is mandatory, requiring all non-hazardous materials to be packaged according to ASTM D3951 and all shipments to be labeled per MIL-STD-129. The opportunity falls under NAICS code 332722 and was posted on October 28, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

Supply of L3 Technologies Screw AssortmentsThis subcontract involves the supply of 274 units of L3 Technologies, Inc. screw assortment kits, part number OFB-2080-A1, for prime contractors supporting the DLA Weapons Support ASC. The performance of this contract takes place in New Cumberland, Pennsylvania, with delivery terms set as FOB Origin. The supplier must adhere to strict quality and technical standards, including sampling per MIL-STD-1916 or ASQ H1331 and packaging and marking requirements according to MIL-STD-2073-1E and MIL-STD-129. Full compliance with the DLA Master List of Technical and Quality Requirements is mandatory for the fulfillment of this order.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Supply of Insulation Sleeving (NSN 5970-01-218-2102)This subcontract involves the supply of seven units of specialized insulation sleeving, identified by NSN 5970-01-218-2102, to support prime contractors fulfilling DLA supply contracts. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division and falls under NAICS code 326199. The contractor is responsible for ensuring all items meet strict military specifications, including packaging to Packing Level B and palletization according to RP001 DLA Packaging Requirements. Additionally, all shipments must be marked in compliance with MIL-STD-129 to ensure proper delivery and handling of the insulation sleeving.

All Other Plastics Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

Military-Grade Packaging and Preservation ServicesThis subcontract for Military-Grade Packaging and Preservation Services involves providing specialized packaging for sensitive electrical assemblies supporting prime contractors on DLA Weapons Support ASC projects. The contractor is responsible for ensuring all assemblies are packaged and labeled in strict accordance with MIL-PRF-23199E and DLA packaging requirements RP001, utilizing compliant materials to guarantee survival during transit. The final deliverables consist of fully packaged cable assemblies ready for shipment to their FOB destination. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, this opportunity falls under NAICS code 488410. The solicitation was posted on October 28, 2026, with a response deadline set for November 12, 2026.

Motor Vehicle Towing

POSTED

about 21 hours ago

DEADLINE

Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication of one to five special purpose electrical cable assemblies for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The manufacturer must produce these assemblies according to NSN 6150-01-551-8686 specifications, ensuring strict adherence to MIL-STD-130 for IUID implementation and MIL-STD-129 for marking requirements. Quality control must be maintained using zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. To be eligible, the contractor must maintain DFARS compliance and provide a CMMC Level 2 self-assessment. The project falls under NAICS code 335999 and is managed by the Department of Defense. Interested parties must respond by November 12, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 21 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract for Military-Grade Packaging and Marking Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves performing specialized packaging and marking of items in strict accordance with MIL-STD-2073-1E, RP001, MIL-STD-129, and MIL-STD-130N. The provider must utilize military-standard marking equipment along with approved preservatives and cushioning to ensure all shipments are fully prepared for transport. The final deliverables are to be delivered to DLA Distribution in Cherry Point, North Carolina. This opportunity is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division and is categorized under NAICS code 488510. Responses for this requirement are due by November 5, 2026.

Freight Transportation Arrangement

POSTED

about 21 hours ago

DEADLINE

Aerospace Alloy/Bar Stock SupplyThis subcontract for Aerospace Alloy/Bar Stock Supply involves the provision of raw metal bar stock to prime contractors supporting the DLA Weapons Support ASC Commodities Division. The supplier is responsible for delivering certified raw material that strictly adheres to the chemical and physical properties specified in TDP Rev A Gen 1. To ensure aerospace standard compliance and full material traceability, the contractor must provide detailed Mill Test Reports with all deliveries. The agreement mandates strict adherence to the Buy American and Balance of Payments Program. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 423510. Interested parties must note the response deadline of November 5, 2026, for this Department of Defense requirement.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

Supplier of Hamilton Sundstrand Weight ComponentsThis subcontract involves the supply of 19 units of Hamilton Sundstrand Corporation part number 968C593-3, identified by NSN 6115-01-503-8400, to support prime contractors on DLA Weapons Support ASC projects. The selected supplier is responsible for the delivery of these components to designated locations within the United States and Japan. Strict adherence to technical and security standards is required, including packaging and marking according to ASTM D3951 and MIL-STD-129, and palletization per RP001. Additionally, the contractor must maintain compliance with DLA RA001 and NIST SP 800-171 cybersecurity standards. The procurement is managed under NAICS code 423840 for the Department of Defense.

Industrial Supplies Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

Supply of Insulating Flat Washers (NSN 5970-01-310-1298)This subcontract involves the manufacture or sourcing of five insulating flat washers, identified by NSN 5970-01-310-1298, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires strict adherence to RP001 DLA Packaging Requirements and MIL-STD-129 marking and labeling standards, with performance taking place in Keyport. The contractor must ensure full compliance with the Buy American Act and the Berry Amendment regarding sourcing. Additionally, the provider is required to maintain ITAR and EAR compliance and hold certification under the US/Canada Joint Certification Program. Responses for this requirement are due by November 5, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Machine Screws (NSN 5305-01-406-9165)This subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the procurement and delivery of machine screws identified by NSN 5305-01-406-9165. The contractor is responsible for supplying these fasteners to prime contractors for various defense projects, with physical delivery to designated government locations, including Cherry Point. Logistics for the delivery of these parts are handled through the First Destination Transportation program. Strict manufacturing and sourcing compliance is required for this contract. All parts must be produced without the use of additive manufacturing processes and must adhere to the domestic material restrictions set forth by the Berry Amendment and the Buy American Act. The opportunity is categorized under NAICS code 332722, with a response deadline of November 5, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supplier of Self-Locking Plate Nuts (NSN 5310-01-669-4613)This subcontract involves the supply of 155 self-locking plate nuts, identified by NSN 5310-01-669-4613, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing components that strictly adhere to Boeing part number BACN10TL3A6 and DLA Master List requirements. Performance will take place at Tinker AFB, with all units required to be packaged according to MIL-STD-2073-1E and MIL-STD-129 standards. To ensure quality and security, the contractor must maintain ISO 9001:2015 certification and demonstrate compliance with NIST SP 800-171. All delivered hardware must undergo sampling and inspection in accordance with MIL-STD-1916 or ASQ H1331. The solicitation was posted on October 28, 2026, with a response deadline of November 5, 2026, under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 21 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Socket Head Cap Screw Supplier

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Headless Straight Pin (Woodward PN 3124-116)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Screw Thread Inserts (Pin)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture of Close Tolerance Screws (NSN 5305011838736)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Hexagon Head Cap Screws (NSN 5305013700088)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Thrust Washers (NSN/Part 1680-01-218-4178)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Socket Head Cap Screw Supplier (NSN 5305012589105)

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Manufacture and Supply of Flat Washers (NSN 5310-01-049-9174)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Manufacturing of Retaining Ring (NSN 5325015913135)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Hexagon Head Cap Screw Supplier (NSN 5305-01-721-3299)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturer of Plain Hexagon Nuts (NSN 5310015675817)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturer of Plain Hexagon Nuts (MS51967-50)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS