Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Manufacture and Supply of Sleeve Spacers (NSN 5365007678333)

Active

Federal

Response Deadline10/22/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of precision sleeve spacers, identified by NSN 5365007678333, for prime contractors supporting the DLA Weapons Support ASC. The contractor is responsible for fabricating eight finished and packaged spacers according to American Aircraft Parts Mfg. Co. P/N 385346 specifications. Performance takes place at Tinker AFB and requires strict adherence to quality sampling standards per MIL-STD-1916 or ASQ H1331, marking requirements per RQ017 and MIL-STD-129, and packaging guidelines per MIL-STD-2073-1E. To be eligible for this engagement, the provider must maintain RC001 source approval and ensure full compliance with DFARS 252.204-7012. The project falls under NAICS code 332510 and is managed through the Department of Defense. Interested parties must adhere to the established response deadline of October 22, 2026.

General Info

Manufacture and supply eight precision sleeve spacers for DLA Weapons Support by October 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

332510 - Hardware Manufacturing

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-27-T-1181.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SPACER, SLEEVE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 14

subcontract

Response DeadlineOct 22

Submission deadline

Response Deadline

10/22/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures and supplies precision sleeve spacers for prime contractors delivering DLA Weapons Support ASC contracts. Fabricates parts to American Aircraft Parts Mfg. Co. P/N 385346 specifications. Performs quality sampling per MIL-STD-1916 or ASQ H1331 and marking per RQ017 and MIL-STD-129. Requires DFARS 252.204-7012 compliance and RC001 source approval. Delivers eight finished, packaged spacers per MIL-STD-2073-1E.

Similar Contracts

Same NAICS industry code

Annular Ball Bearing Supplier (NSN 3110008522646)This subcontract, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, requires the procurement of 53 annular ball bearings under NSN 3110008522646. The supplier is responsible for manufacturing or sourcing bearings that match Part Number 890666-6, ensuring all units undergo bare item marking per RQ017 and adhere to preservation and packaging standards defined by MIL-DTL-197M and MIL-STD-129. Delivery is specified as FOB Origin, with the place of performance located in San Diego. To qualify, the contractor must maintain ITAR compliance and utilize inspection systems certified under ISO 9001 or SAE AS9003. This opportunity is designated as a Total Small Business Set-Aside under FAR 19.5, falling under NAICS code 332510. Interested parties must submit their responses by October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Manufacturer of Plain Rod End Bearings (NSN 3120-01-254-4454)This subcontract involves the precision manufacture and supply of 24 plain rod end bearings for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The bearings must be produced according to NSN 3120-01-254-4454 specifications, with Class 3A and 3B threading gaged per SAE AS8879 or MIL-S-7742. Quality assurance is mandatory, requiring inspections performed in accordance with MIL-STD-1916 or ASQ H1331. The contractor must maintain strict regulatory compliance, including adherence to NIST SP 800-171 standards, the Buy American Act, and the Berry Amendment. Performance of the contract is centered in Cherry Point, and the project falls under NAICS code 332510.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

RING, RETAINING

Solicitation # SPE4A6-27-T-4627

Solicitation SPE4A6-27-T-4627 is a fixed-price procurement issued by the DLA Weapons Support ASC Commodities Division for the supply of two retaining rings, identified by NSN 5325013161373. The requirement specifies a delivery timeframe of five days after order, with a required delivery date of September 23, 2026. Shipping is designated as FOB Origin, with both inspection and acceptance occurring at the origin. The items are to be delivered to the DZ Ikmal Merkezi Komutanligi in Derince Izmit, Turkey, via freight forwarder A.J. Worldwide Services Inc. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-STD-1916 or ASQ H1331 for sampling. Technical and quality requirements are further governed by the DLA Master List, and the use of mercury or mercury compounds in packaging is prohibited. Offerors must submit quotes via the DLA Internet Bid Board System by October 23, 2026. Key regulatory compliance includes the Buy American and Balance of Payments Program, DFARS cybersecurity reporting requirements, and representations regarding covered defense telecommunications equipment. Award eligibility is restricted for items produced using additive manufacturing, and a price evaluation preference is available for HUBZone concerns.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

STUD, TURNLOCK FASTENER

Solicitation # SPE4A6-27-T-4451

Solicitation SPE4A6-27-T-4451 is a total small business set-aside issued by the DLA Weapons Support ASC Commodities Division for the procurement of 822 turnlock fastener studs, identified by NSN 5325-01-199-0321. The contract requires delivery to the DLA Distribution Depot Oklahoma at Tinker AFB, with a need ship date of April 13, 2027, and a final required delivery date of May 16, 2027. All offers must be submitted via the DLA Internet Bid Board System (DIBBS) based on FOB Origin terms. The procurement is subject to stringent technical and quality requirements, including the DLA Master List, ASTM D3951 packaging standards, and MIL-STD-129 marking and labeling. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the contract mandates compliance with CMMC Level 2, DFARS 252.204-7012 for safeguarding covered defense information, and the Buy American Act and Berry Amendment for domestic sourcing. Inspection and acceptance will occur at the destination per FAR 52.246-2, and all invoicing must be processed electronically through the Wide Area Workflow (WAWF) system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

PIN, STRAIGHT, HEADLESS

Solicitation # SPE4A6-27-T-4590

Solicitation SPE4A6-27-T-4590, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of 264 headless straight pins (NSN 5315-01-512-1190). The requirement is managed under the First Destination Transportation program with an original required delivery date of February 7, 2027, and a need ship date of April 13, 2027. Delivery and inspection will take place at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement is subject to strict quality and technical standards, including the DLA Master List of Technical and Quality Requirements, and requires adherence to MIL-STD-129 for marking and ASTM D3951 for packaging. The contract incorporates significant regulatory requirements, including CMMC Level 2 self-assessment or third-party certification and strict export controls under ITAR and EAR. Compliance with the Buy American Act and the Berry Amendment is mandatory, with specific disclosure requirements for non-domestic materials. Invoicing must be processed through the Wide Area WorkFlow system. Evaluation preferences are available for SBA-certified HUBZone small businesses. All quotes must be submitted via the DLA Internet Bid Board System, and the award is subject to destination inspection and acceptance based on zero-nonconformance sampling plans.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

STUD, TURNLOCK FASTENER

Solicitation # SPE4A6-27-T-4491

Solicitation SPE4A6-27-T-4491 is issued by the DLA Weapons Support ASC Commodities Division for the procurement of 174 turnlock fastener studs, identified by NSN 5325-01-130-3357 and part number D8012-1-5A. The requirement is for delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a need ship date of April 13, 2027, and an original required delivery date of June 9, 2027. The procurement is categorized under NAICS code 332510 and requires quotes to be submitted via the DLA Internet Bid Board System. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951 and MIL-STD-129 for marking and labeling, with the DLA Master List of Technical and Quality Requirements taking precedence. Property identification must comply with MIL-STD-130N. Administrative requirements include the use of Wide Area WorkFlow for invoicing and receiving reports. The solicitation incorporates various FAR and DFARS clauses covering cybersecurity, the Buy American Act, the Berry Amendment, and prohibitions on certain telecommunications equipment. Inspection and acceptance are designated to occur at the destination.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

BOLT, INTERNAL WRENCHIN

Solicitation # SPE4A6-27-T-4666

Solicitation SPE4A6-27-T-4666 is a fixed-price procurement issued by the DLA Weapons Support ASC Commodities Division for 250 internal wrenching bolts, identified by NSN 5306006381171. The items must comply with basic non-government standards NASM20004 through NASM20024 Revision 5 and reference QAP 13873. The procurement is managed under the First Destination Transportation program with FOB Origin terms, and the required delivery date is June 13, 2027, with a need ship date of April 13, 2027. Inspection and acceptance will occur at the origin. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific provisions for packaging per ASTM D3951 and RP001, and marking per MIL-STD-129. Quality assurance involves sampling methods according to MIL-STD-1916 or ASQ H1331, and manufacturers must maintain inspection systems complying with SAE AS9003 or ISO 9001. Administrative requirements include electronic invoicing via Wide Area Workflow and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic sourcing, and HUBZone small business preferences.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

COLLAR, PIN-RIVET

Solicitation # SPE4A6-27-T-4589

Solicitation SPE4A6-27-T-4589 is a federal procurement issued by the DLA Weapons Support ASC Commodities Division for the acquisition of 1,305 units of Collar, Pin-Rivet (NSN 5320014903590). The contract specifies a delivery timeframe of 171 days, with a need ship date of April 13, 2027, and a final required delivery date of May 11, 2027. Delivery is set as FOB Origin, with the final destination being the DLA Distribution Depot at Hill AFB, Utah. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. The procurement is subject to rigorous quality and technical standards, including sampling methods per MIL-STD-1916 or ASQ H1331 and packaging requirements following ASTM D3951 and MIL-STD-129. It incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program, prohibitions on hexavalent chromium, and cybersecurity requirements under DFARS 252.204-7012. The solicitation also utilizes the HUBZone price evaluation preference and requires offerors to submit quotes via the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

STUD, FRICTION CATCH

Solicitation # SPE7L4-27-T-0425

Solicitation SPE7L4-27-T-0425 is a request for quotations issued by the DLA Weapons Support LSO Combat Vehicles and Armament for the procurement of six friction catch studs, identified by NSN 5340-01-717-4407 and BAE Systems part number 4380968. The requirement is categorized under NAICS code 332510. The need ship date is April 6, 2027, with an original required delivery date of June 24, 2027. Delivery is FOB Destination to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will also occur at the destination per FAR 52.246-2. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 for packaging. All shipments must be marked and labeled according to MIL-STD-129 and palletized per RP001. Hazardous materials must be handled according to FED-STD-313 and TQ requirement IP025, including the submission of Safety Data Sheets. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with the Buy American Act and Berry Amendment. Quotations must be submitted through the DIBBS portal by October 26, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-4445

Solicitation SPE4A6-27-T-4445, issued by the DLA Weapons Support ASC Commodities Division, is a request for the procurement of 172,000 threaded pin-rivets under NSN 5320-00-813-3920. The requirement is managed under NAICS code 332510 and utilizes the First Destination Transportation program with shipping terms set as FOB Origin. Delivery is required within 171 days after award, with a need ship date of April 13, 2027, and a final required delivery date of May 21, 2027, to the DLA Distribution Depot at Tinker AFB, Oklahoma. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards such as ASTM D3951 and MIL-STD-129 for marking and labeling. Inspection and acceptance will occur at the origin, with sampling conducted per MIL-STD-1916 or ASQ H1331. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with DFARS 252.204-7012 for safeguarding covered defense information.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE4A7-27-T-1345

Solicitation SPE4A7-27-T-1345 is a federal procurement issued by the Defense Logistics Agency Weapons Support ASC Supplier OE and AF Div for the acquisition of 97 units of SHIM, identified by NSN 5365-01-338-4179. The contract is established under the First Destination Transportation program with a delivery timeframe of 171 days after the order is placed, with the place of performance and delivery located in Phoenix, Arizona. The procurement is governed by NAICS code 332510 and requires the contractor to adhere to strict quality and marking standards, including MIL-STD-129 and MIL-STD-130, and specifically prohibits the use of the Boeing CAGE code on parts. Key compliance requirements include CMMC Level 2 certification and adherence to DFARS 252.204-7012 for safeguarding covered defense information. The item is subject to export controls under ITAR or EAR, requiring contractors to have an approved US/Canada Joint Certification Program certification. Inspection and acceptance will occur at the origin, with the manufacturer's quality system required to comply with SAE AS9003 or ISO 9001. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. Additionally, the contract mandates compliance with the Buy American Act and the Berry Amendment, and all quotes must be submitted via the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-4502

Solicitation SPE4A6-27-T-4502 is a fixed-price contract issued by the DLA Weapons Support ASC Commodities Division for the procurement of 69,199 blind rivets, identified as part number MS20605R3W4 and NSN 5320-01-212-4703. This is designated as a critical application item that must comply with technical standard NASM20605 Revision 4 and quality assurance provision QAP 13873. The material has been determined not to be hazardous, and there is no shelf life requirement. Delivery is required by April 13, 2027, with a final required delivery date of May 18, 2027, shipping FOB Origin to DLA Distribution Warner Robins in Georgia. The contract mandates strict quality and packaging standards, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Sampling must follow MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the origin. Packaging must adhere to ASTM D3951 and RP001, with labeling and marking compliant with MIL-STD-129. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with DFARS regulations regarding safeguarding covered defense information and domestic sourcing, including the Buy American Act and Berry Amendment. Item Unique Identification is not required for this procurement.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

QPL-Certified Electrical Insulation Tape SupplierThis subcontract involves the supply of specialized electrical insulation tape for prime contractors supporting DLA Weapons Support ASC contracts. The required product must be opaque, 1.5 inches wide, 0.010 inches thick, and 108 feet per roll, featuring silicone adhesive and marking code S33. All tape must be manufactured in strict accordance with MIL-I-19166C and requires QPL-19166 certification. The supplier must ensure full compliance with the Buy American Act and the Berry Amendment. Deliverables consist of two rolls of NSN 5970005839528, which must be packaged according to MIL-STD-2073-1E and MIL-STD-129 standards. This opportunity falls under NAICS code 335210 and is managed by the Department of Defense.

Small Electrical Appliance Manufacturing

POSTED

about 3 hours ago

DEADLINE

NUT, CAM RELEASE

Solicitation # SPE4A7-27-T-1329

Solicitation SPE4A7-27-T-1329 is a Request for Quotations issued by the DLA Weapons Support ASC Supplier Oper AE and AF Div for the procurement of 22 units of Cam Release Nuts, identified by NSN 1630007162107 and part number 591-1-14 from Tactair Fluid Controls Inc. This critical application item is categorized under NAICS code 336413. The required delivery date is April 17, 2027, with a need ship date of April 13, 2027. Delivery is specified as FOB Origin, with both inspection and acceptance occurring at the destination, DLA Distribution Cherry Point in North Carolina. The contract mandates strict adherence to technical and quality requirements, including a CMMC Level 2 Self-Assessment and specific sampling methods per MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials, with all labeling following MIL-STD-129 and palletization following RP001. Administrative requirements include the use of the Wide Area Workflow system for invoicing and compliance with the Buy American Act and Berry Amendment. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

RING, RETAINING

Solicitation # SPE4A7-27-T-1380

Solicitation SPE4A7-27-T-1380 is a fixed-price procurement issued by the Defense Logistics Agency for the supply of 12 retaining rings, identified by NSN 5325016055435. The contract requires delivery FOB Origin with an original required delivery date of June 7, 2027, and a need ship date of April 13, 2027. Both inspection and acceptance will occur at the destination, specifically DLA Distribution San Diego. The procurement falls under NAICS code 332722 and includes specific requirements for source approval requests and the removal of government identification from non-accepted supplies. Compliance with rigorous quality and packaging standards is mandatory, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Sampling must adhere to MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan required for acceptance. Additionally, the contractor must meet cybersecurity standards via a CMMC Level 2 self-assessment and comply with DFARS regulations regarding the safeguarding of covered defense information. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow system.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

RETAINER, AIRCRAFT

Solicitation # SPE4A7-27-T-1412

Solicitation SPE4A7-27-T-1412 is a request for quotations issued by the DLA Weapons Support ASC Supplier Oper AE and AF Div for the procurement of 36 aircraft retainers, identified by NSN 1680-01-295-5305. The items are to be delivered to Tinker AFB, Oklahoma, with a delivery window of 111 days after the order is placed. Shipping is based on FOB Origin under the First Destination Transportation program. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. The contract imposes strict quality and security requirements, including compliance with SAE AS9003 or ISO 9001 standards and zero-based sampling plans for inspection. Technical data is subject to ITAR or EAR export controls, requiring offerors to hold an approved JCP certification and DLA authorization. Additionally, the government prohibits the use of additive manufacturing for these parts unless specifically authorized. Compliance with the Buy American Act and Berry Amendment is required, and the solicitation includes preferences for certified HUBZone small businesses.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

COUPLING, CLAMP, GROOVED

Solicitation # SPE4A7-27-T-1378

Solicitation SPE4A7-27-T-1378 is a procurement request by the Defense Logistics Agency (DLA) for 34 units of grooved clamp couplings, identified by NSN 5342014622677 and part number 14J23-40A. The contract is categorized under NAICS code 332722. Delivery is required within 171 days, with the freight and parcel shipping destination being DLA Distribution San Diego, California. The terms are FOB Origin, and both inspection and acceptance will occur at the origin. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, with specific AQL levels assigned for critical, major, and minor attributes. The agreement incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, compliance with the Buy American Act, and prohibitions on covered defense telecommunications equipment. Invoicing and payment are to be processed electronically through the Wide Area Workflow (WAWF) system.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE4A7-27-T-1384

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

SWIVEL ASSEMBLY

Solicitation # SPE4A7-27-T-1372

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

FITTING, ACTUATOR, TIP

Solicitation # SPE4A7-27-T-1334

Solicitation SPE4A7-27-T-1334 is a fixed-price, total small business set-aside procurement issued by the DLA Weapons Support ASC for the acquisition of two actuator tip fittings, part number 35-2331 and NSN 1560-00-779-7953. The contract requires adherence to engineering drawing EI-007797953 and the DLA Master List of Technical and Quality Requirements. Delivery is specified as 591 days after receipt of order, with the destination being the DLA Distribution Depot Oklahoma at Tinker AFB. The procurement includes a requirement for a First Article Test and mandates that all special processes be performed by NADCAP-approved organizations. The contract imposes strict regulatory and quality standards, including ISO 9001:2015 compliance for inspection systems and adherence to the Buy American Act and Berry Amendment. Due to the nature of the technical data, the item is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Cybersecurity requirements are significant, incorporating CMMC Level 2 and NIST SP 800-171 standards for safeguarding covered defense information. Inspection and acceptance will occur at the origin, and all invoicing must be processed electronically through the Wide Area WorkFlow system.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE4A7-27-T-1343

Solicitation SPE4A7-27-T-1343 is a procurement issued by the Defense Logistics Agency for 151 units of flexible wire rope used for aircraft control. The required material consists of 1/16 inch diameter wire rope with 7 x 7 construction, 24 inches in length, and a 1/8 inch outside diameter nylon jacket. The items must be corrosion resistant steel and comply with MIL-DTL-83420R and MIL-DTL-83420/4E specifications. Contractors must provide components from sources qualified on the applicable Qualified Products List or Qualified Manufacturers List and maintain full supply chain traceability documentation per DLA Directive Procurement Note C03. The contract is established as FOB Origin with inspection and acceptance occurring at the destination. Delivery is required within 171 days, with a need ship date of April 13, 2027. Packaging must adhere to MIL-STD-2073-1E and ASTM 700, while marking must comply with MIL-STD-129. Quality assurance involves a zero-based sampling plan per MIL-STD-1916 or ASQ H1331. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system. This acquisition is subject to the DLA Master Solicitation for Automated Simplified Acquisitions and includes various DFARS and FAR clauses regarding cybersecurity, domestic sourcing, and small business preferences.

Other Fabricated Wire Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

STRUT ASSEMBLY, SUPPORT

Solicitation # SPE4A7-27-T-1409

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

DUCT ASSEMBLY, BLEED AI

Solicitation # SPE4A7-27-T-1385

Aircraft Manufacturing

POSTED

about 3 hours ago

DEADLINE

BALANCE WEIGHT, ELEV

Solicitation # SPE4A7-27-T-1415

Solicitation SPE4A7-27-T-1415 is issued by the Defense Logistics Agency (DLA) Weapons Support ASC Supplier Oper AE and AF Div for the procurement of three balance weights for elevators (NSN 1560-01-676-5829). The requirement is categorized under NAICS code 336413 and specifies a delivery timeline of 99 days after receipt of order, with a need ship date of January 31, 2027, and a final required delivery date of October 26, 2027. The place of performance is Tinker AFB, Oklahoma, and the shipment is handled under the First Destination Transportation program with FOB Origin terms. This contract contains strict technical data export controls under ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and specific DLA training to access technical data. Quality standards are rigorous, requiring manufacturer inspection systems to comply with SAE AS9003 or ISO 9001, with inspection and acceptance occurring at the origin. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking, while palletization must follow DLA requirement RP001. Administrative requirements include electronic invoicing via Wide Area WorkFlow (WAWF), compliance with the Buy American Act and Berry Amendment, and CMMC Level 2 certification for cybersecurity.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS