Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Manufacture and supply of T-142 Track Shoe Block

Active
PANDTA26P0000_033811Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture and supply of T-142 Track Shoe Blocks, part number 11645128 Rev C, to Red River Army Depot Rubber Products. The total estimated quantity for fiscal year 2026 is 24,000 units, with specific monthly delivery milestones beginning with 2,400 units due by November 2nd, followed by 3,600 units each month from December through May. The track shoe blocks must be produced in accordance with drawing specifications and Quality Assurance Requirement 11645128, and each shipment must be accompanied by a Certificate of Conformance. Early delivery is permitted without additional cost to the government. This procurement is a total small business set-aside under NAICS code 332111 and is managed by the Department of Defense office located in Texarkana, Texas. The solicitation was posted on April 9, 2026, with a response deadline on April 14, 2029. Points of contact for the contract include Randy Reece and Travis Peterson, who can be reached via provided military email addresses and phone numbers. The contract emphasizes quality compliance and timely, scheduled deliveries for fulfilling the depot's operational requirements.

General Info

Manufacture and supply 24,000 T-142 Track Shoe Blocks to Red River Army Depot, FY2026.

Agency

Department Of Defense → W6QK Acc RradView Agency

NAICS

332111 - Iron and Steel ForgingView NAICS

Place of Performance

Texarkana, TX, 75501, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc Rrad
Contacts2 people available
OfficeTEXARKANA, TX, 75507-5000, USA
Organization / Agency
Department Of Defense → W6QK Acc Rrad
View Agency Profile
Office AddressTEXARKANA, TX, 75507-5000, USA

Full Description

Show more

Red River Army Depot Rubber Products has a requirement to purchase T-142 Track Shoe Block P/N: 11645128 Rev C in the following estimated quantities per fiscal year:


FY26 – 24,000 each


Receive 2,400 Shoe blocks by November 2nd.


Receive 3,600 Shoe blocks by December 2nd.


Receive 3,600 Shoe blocks by January 5th.


Receive 3,600 Shoe blocks by February 2nd.


Receive 3,600 Shoe blocks by March 2nd.


Receive 3,600 Shoe blocks by April 2nd.


Receive 3,600 Shoe blocks by May 2nd.


T-142 Track Shoe Block, part number 11645128 Rev C, produced to the specifications of drawing 11645128 Rev C, in accordance with Quality Assurance Requirement (QAP) 11645128, accompanied with a Certificate of Conformance (CoC). Early delivery is acceptable at no additional cost to the Government.

Similar Contracts

Same NAICS industry code

NAICS: 332111
New
DIBBS
CHANNEL, STRUCTURAL
Solicitation # SPE8E4-26-T-1964
The contract specifies the procurement of a structural steel channel made from ASTM A36 steel, with exact dimensional specifications of 1.50 by 2.50 inches, identified by part number 12442180. The finish requires zinc plating per ASTM B633, category SC4 (Fe/Zn 25), type VI, with a prime coating conforming to MIL-DTL-53030 or MIL-PRF-32348, adhering to dry film thickness standards under MIL-DTL-53072, followed by a topcoat compliant with MIL-PRF-22750, type II, in color #24533 semigloss green. All technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions tied to solicitations or amendments. The product must conform to MIL-STD-130N for identification marking and be manufactured under an ISO 9001:2008 Quality Management System. A Certificate of Conformance and quality compliance documentation are mandatory, with CDRLs and DD Form 1423s required for delivery verification. The contract calls for 11 units to be delivered FOB origin within 182 days, with zero variance permitted in quantity. Inspection and acceptance occur at the destination point, specifically the DLA Distribution Red River facility in Texarkana, Texas. Packaging must comply with ASTM D3951, prioritized by DLA Master List requirements, and all units must be labeled and palletized per MIL-STD-129 and RP001 packaging standards. The unit of issue is each (EA), priced at $11.00 per unit, with total contract value of $121.00. The NSN for the item is 9520-01-540-5600, and the original delivery requirement was June 3, 2027, with a need ship date of August 5, 2026. The contract is subject to federal acquisition regulations, including FAR 52.246-15 and higher-level quality requirements, and solicitation details are accessible via DIBBS. The contract falls under NAICS code 332111 and is managed by the Department of Defense through the Red River Receiving Building, with Pamela Duff
RED RIVER RECEIVING BLDG

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-1948
The contract specifies the procurement of steel bar material classified as COMP 302, supplied in hot rolled hexagonal shape, annealed condition, with a width of 0.625 inches across flats and lengths ranging between 8 and 12 feet, sold by the foot at a reference weight of 1.150 pounds per foot. The material must be supplied in whole-foot increments only and meet exact dimensional tolerances. Comprehensive quality and technical requirements are mandated under the DLA Master List of Technical and Quality Requirements, with certifications including a Certificate of Quality Compliance Mill-Material Certification required for every shipment, to be provided to both the customer and the DLA Troop Support Contracting Officer. Continuous identification markings are mandatory on each unit including the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer's heat and lot number, and dimensions. Marking methods are restricted to stenciling or approved stamping, with labeling using waterproof, non-contaminating inks. Adhesive labels are required for bars under 0.250 inches in nominal outer diameter, and tags are acceptable for wire. All suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award, and any deviation from this requirement must be explicitly declared, with noncompliance treated as an unauthorized substitution potentially subject to criminal penalties. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with preservation and marking governed by ASTM A700 and MIL-STD-129R, including special codes Z and ZZ for preservation and marking. Labels must be secure, legible, and resistant to handling, with additional marking rules applying when shipments involve dual units of measure. Delivery is FOB origin, with inspection and acceptance occurring at destination, under a 167-day delivery schedule with a 10% quantity variance allowance. The NSN is 9510-00-265-1650, with a total quantity of 54 feet and a unit price of $54.00 per foot, shipped to the DLA Distribution facility in New Cumberland, PA. All documentation referenced in the Technical Data Package including CDRL-METALSCERT, SAE AMS-S-7720B, ASTM A700-14, and MIL-STD-129R govern compliance, and QSL program waivers apply for qualified suppliers,
DDSP NEW CUMBERLAND FACILITY

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-1951
The contract specifies the procurement of 30 feet of steel bar, composed of grade 303 stainless steel, in a cold-finished hexagon shape with an annealed temper, measuring 0.875 inches across flats and supplied in whole-foot lengths of 10, 11, or 12 feet, with a reference weight of 2.307 pounds per foot. Material must comply with ASTM A582/A582M and SAE AMS2806 standards, and a Certificate of Quality Compliance, also known as a mill-material certification, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. All units must be permanently marked with the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions using approved methods such as stenciling or adhesive labels; stamping is permitted except for die stamping, and marking fluids must not contaminate the product. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, with special labeling codes Z and ZZ per ASTM A700, and palletization must adhere to DLA packaging rules. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and a 10% variance in quantity is allowed. The item is designated under NSN 9510-00-293-5009 and must be delivered by February 1, 2027, to the DLA Distribution facility in New Cumberland, Pennsylvania. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond, and non-compliance constitutes an unauthorized substitution with potential criminal penalties. The contract waives source inspection requirements for qualified suppliers, and CDRL-METALSCERT documentation must be provided if not already available in the DLA system.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332111
New
DIBBS
BINDER, LOAD
Solicitation # SPE8EF-26-Q-0166
The contract specifies the procurement of 557 units of a BINDER, LOAD with NSN 3990-01-323-0771 under solicitation SPE8EF-26-Q-0166, requiring delivery within 60 days after award at a firm fixed price with zero variance in quantity. The item must be manufactured using a forging process, necessitating specialized tooling, and sourcing inquiries for tooling, materials, or production support should be directed to DLA’s Aviation or Land & Maritime Supply Chains. Strict compliance with MIL-STD-2073-1E packaging standards is mandated, including specific method codes for preservation, wrapping, and unit containerization, with all marking adhering to MIL-STD-129 and no special marking applied. Palletization must conform to DLA packaging requirements, and the final destination for delivery is DLA Distribution San Diego. The item is subject to CMMC Level 2 self-assessment requirements and inclusion of technical and quality standards from the DLA Master List, with configuration change management governed by engineering change proposal protocols. Government identification must be removed from non-accepted supplies, and cybersecurity protections apply as covered defense information. The delivery is FOB destination, with inspection and acceptance occurring at origin, and transportation logistics follow DLA procedural notes C19 and C20. The purchase request number is 7015993527, and the anticipated ship date is November 2, 2026.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E9-26-T-3292
This contract pertains to the procurement of 334 feet of chrome-molybdenum (4130) aircraft-quality cold-drawn, normalized steel bar, measuring 0.500 inches square and 10 to 12 feet in length, with strict adherence to SAE AMS-S-6758B and AMS2806 standards. All material must be supplied in whole-foot increments and accompanied by a Certificate of Quality Compliance, which must be included with each shipment and submitted to the DLA Troop Support Contracting Officer. Mandatory continuous markings on each unit include the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions; markings must be legible, waterproof, and applied via stamping or stenciling without contaminating the material. Adhesive labels are required for bars, tubes, and shapes under 0.250 inches in nominal OD, while tags are permitted for wire. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional components such as batteries, sensors, or instruments specified by NAVSEA, with additional containment requirements for portable devices. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award, and any deviation from this requirement must be explicitly declared. The government waives source inspection requirements for QSL-compliant suppliers, relieving them of certain quality conformance inspections. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with special codes Z and ZZ as defined by ASTM A700; vinyl or plastic-coated pressure-sensitive labels are authorized for structural shapes and loose shipments. Each shipment must include the quantity in both units of measure if applicable, and must be delivered FOB origin to the designated DLA warehouse in Tracy, California, no later than 167 days from award, with a required ship date of February 1, 2027. A 10% quantity variance is permitted, and inspection and acceptance occur at the destination. The contract also references DLA’s Master List of Technical and Quality Requirements, which governs all technical and quality stipulations unless amended, and compliance is mandatory under penalty of criminal or civil action for unauthorized substitutions.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-1944
The contract specifies the procurement of hot-rolled steel bar material with a diameter of 8.000 inches and lengths between 10 and 12 feet in whole-foot increments, with a reference weight of 170.90 pounds per foot. The material must meet the UNS K02600 specification and conform to referenced standards including ASTM A36/A36M-19, ASTM A6/A6M-24B, ASTM A700-14, and SAE AMS2806. Full compliance with technical and quality requirements outlined in the DLA Master List is mandatory, and a Certificate of Quality Compliance must accompany each shipment, with a copy submitted to the DLA Troop Support Contracting Officer. Continuous identification marking is required on each unit, including the DLA contract number, NSN, specification revision, alloy details, manufacturer name, heat and lot numbers, and dimensions. Markings must be legible, waterproof, and applied using approved methods such as stenciling or stamping, excluding die stamping; adhesive labels are required for bars under 0.250 inches in nominal diameter. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with special codes Z and ZZ as defined in ASTM A700. Vinly or plastic-coated pressure-sensitive labels are authorized for structural shapes and banded units. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award; non-compliance constitutes an exception that must be explicitly declared. Failure to comply with QSLD requirements may result in criminal penalties. Source inspection is waived for contracts awarded to qualified suppliers, relieving the need for certain quality conformance inspections. The material is to be delivered FOB origin in a quantity of 15 feet per unit, with a ±10% variance allowed, within 167 days of contract award, with an original required delivery date of November 12, 2026. Inspection and acceptance occur at the destination facility. Shipping and packaging must follow MIL-STD-129R with special marking code ZZ, and all shipments must be addressed to the DLA Distribution facility at New Cumberland, Pennsylvania. The contract is issued under solicitation SPE8E4-26-T-1944, and technical data packages, including CDRL-METALSCERT, must be reviewed for complete compliance.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E9-26-T-3286
This procurement seeks carbon cold-rolled steel bars measuring 0.500 inches thick, 4.00 inches wide, and 10 to 12 feet in length, with all bars required to be supplied in whole-foot increments only. A Certificate of Quality Compliance, commonly known as a mill-material certification, is mandatory for every shipment and must accompany each delivery to the DLA depot or end customer, with a copy forwarded to the DLA Troop Support Contracting Officer. Continuous identification markings are required on each unit, including the DLA contract delivery order number, NSN, specification number and revision, grade, class, type, alloy, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be legible to the unaided eye, waterproof, and stable under normal handling, using only stenciling or non-die stamping methods; adhesive labels are required for bars, tubes, or shapes under 0.250 inches nominal OD, and tags are acceptable for wire. Packaging must comply with MIL-STD-2073-1E, with preservation and packing following ASTM A700 specifications under codes ZZ and Z, and marking must adhere to MIL-STD-129, including dual-unit quantity labeling where applicable. Delivery is FOB origin, with an estimated 167-day lead time to a designated facility in New Cumberland, PA, and a 10% variance in quantity is permitted. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and any deviation from this requirement constitutes a non-compliant bid that may result in rejection. Offers based on additive manufacturing are ineligible, and submission of a Safety Data Sheet is mandatory prior to award. The contract incorporates a set of Defense Federal Acquisition Regulation Supplement and Federal Acquisition Regulation clauses relating to cybersecurity, whistleblower rights, export controls, hazardous materials, system for award management, and NIST SP 800-171 compliance, with multiple deviations in effect for certain clauses. The contractor must use the Wide Area Workflow system for electronic invoicing and receiving reports, register with DLA’s Account Management & Provisioning System to access vital systems, and comply with Buy American and Berry Amendment requirements, with a reduced threshold of $150,000. The solicitation is issued under the DLA Automated Simplified Acquisitions framework, with an award potentially made through automation, and pricing is subject to
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332111
New
DIBBS
BEAM, STRUCTURAL
Solicitation # SPE8E4-26-T-1947
The material specified is a structural steel beam made from Grade A hot-rolled steel, conforming to ASTM-A6 Table A2.1 “W” shapes with a flange height of 4.000 inches, an overall width of 6.000 inches, flange thickness of 0.375 inches, and web thickness of 0.250 inches. The beams must be delivered in whole-foot lengths between 30 and 40 feet, with a nominal weight of 16.0 pounds per foot. All material must comply with the American Bureau of Shipping (ABS) Rules for Building and Classing Steel Vessels, Part 2, Section 1, including Appendix 2/D, and must be produced by an approved steel mill. No substitute materials are permitted. The steel must be accompanied by a Certificate of Quality Compliance (Mill-Material Certification) for every shipment, submitted both with the goods and directly to the DLA Troop Support Contracting Officer. Each beam must be permanently marked with the DLA contract delivery order number, NSN, specification number and revision, grade, class, type, alloy, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be legible, waterproof, and applied via stamping (excluding die stamp) or stenciling using non-contaminating fluid, and must withstand normal handling. Adhesive labels are required for units under 0.250 inches nominal OD. Packaging must meet MIL-STD-2073-1E and DLA packaging requirements, with special markings in accordance with ASTM A700 and MIL-STD-129R. Only suppliers on the Qualified Suppliers List for Distributors (QSLD) are eligible to quote, and any deviation must be explicitly declared. Failure to comply with QSLD, marking, certification, or dimensional requirements may result in rejection of the product and potential criminal penalties. Deliveries are due within 167 days of contract award, FOB origin, with a 10% quantity variance allowed, and shipments must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-1949
Steel bar, UNS K23080, round, 1.250 inches in diameter, must be supplied in whole-foot lengths between 10 and 12 feet, at approximately 4.170 pounds per foot, and must fully comply with SAE AMS6411K Revision K and SPE8E4-26-T-1949 Section B. Every unit must be permanently marked with the DLA contract delivery order number, NSN, specification revision, grade, alloy, manufacturer’s name, heat and lot number, and dimensions; markings must be legible, waterproof, and non-contaminating, applied via stenciling or approved methods excluding die stamping. Adhesive labels are required for bars under 0.250 inches in nominal diameter, and tags are acceptable for wire. A Certificate of Quality Compliance, including mill certification, must accompany each shipment and be forwarded to the DLA Troop Support Contracting Officer. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and any deviation from this requirement constitutes an exception that must be explicitly noted; non-compliant products may result in criminal penalties. Packaging must adhere to MIL-STD-2073-1E and RP001, with preservation per ASTM A700 and marking compliant with MIL-STD-129, using special code ZZ. All shipments are FOB origin, with a 10% quantity variance allowed, inspected and accepted at destination, and must be delivered within 167 days to Tinker AFB, Oklahoma. The required delivery date is November 28, 2026, with a need ship date of February 1, 2027.
DEPOT OKLAHOMA

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332111
New
Federal
Conventional Tube Forgings per Drawing # 13122585, Revision New, for 155mm M775 Cannon, for the Watervliet Arsenal
Solicitation # W911PT26RA012
This contract solicitation is for the procurement of 72 conventional tube forgings per Drawing #13122585, Revision New, intended for use in the 155mm M776 Cannon at Watervliet Arsenal, New York. First Article Testing is required, and delivery is specified as FOB Destination. The solicitation, identified as W911PT26RA012, is scheduled for release on or around August 5, 2026, with responses due by August 4, 2026. All technical data associated with the forgings is designated as Militarily Critical Technical Data, and only businesses certified by the U.S./Canada Joint Certification Office with an active DD Form 2345 and a legitimate requirement may access it; foreign entities beyond Canada are ineligible. Participation requires an active System for Award Management (SAM) registration with current representations and certifications. The solicitation and all subsequent amendments will be issued electronically via SAM.gov, and bidders are solely responsible for monitoring the site for updates; failure to do so may result in nonresponsive offers. The acquisition is subject to international trade agreements including the World Trade Organization Government Procurement Agreement. All communications and submissions must be conducted through the designated electronic portal, and direct inquiries should be directed to Amanda Robinson at the Watervliet Army facility.
W6QK Acc Wva

POSTED

about 13 hours ago

DEADLINE

in 30 days
View Details

More opportunities from Department Of Defense → W6QK Acc Rrad

Same awarding agency

NAICS: 541715
New
Federal
Army Contracting Command – Red River Army Depot (ACC-RRAD) Organic Industrial Base (OIB) Modernization Commercial Solutions Opening (CSO)
Solicitation # W911RQ-26-S-C001
The U.S. Army, through the Army Contracting Command – Red River Army Depot, is pursuing the modernization of its Organic Industrial Base under Commercial Solutions Opening W911RQ-26-S-C001, a flexible procurement initiative authorized under DFARS Subpart 212.70 and administered under FAR Part 12 Commercial Item Procedures. This effort is aligned with the Army’s strategic focus on Convergent Manufacturing, integrating advanced technologies such as digital twin, automation, connected digital enterprise, and cybersecurity to enhance producibility, sustainment, and logistics capabilities. The solicitation invites innovative commercial solutions across multiple areas of interest including automated media blast systems, camera monitoring for vehicle test tracks, power pack interface and test sets, AS9100 certification support, track pin and bushing manufacturing, and fixture removal for Bradley Fighting Vehicle hulls. Each area of interest is evaluated independently with specific submission deadlines, and all responses must be submitted electronically via email in two separate volumes: a technical proposal excluding cost data and a price proposal with full cost breakdowns, including labor rates, material quotes, and overhead. Offers must be unclassified, submitted through SAM.gov-registered entities with a Unique Entity ID, and adhere to strict formatting rules including a maximum of five pages or fifteen slides for initial solution briefs. Evaluation of proposals prioritizes technical merit and feasibility, followed by industrial base impact, speed and scalability of implementation, price fairness and reasonableness, private investment leverage, and a credible transition plan to full production. The government will use a trade-off approach rather than lowest price technically acceptable, with no numerical weights assigned but clear emphasis on non-price factors. Awards are contingent upon funding availability, successful negotiation, and technical validation, and do not obligate the government to proceed with any contract until formal award. Performance is expected to occur at Red River Army Depot in Texarkana, Texas, with inspection and acceptance conducted by the government at that location per MIL-DTL-11891, MIL-STD-1907, ASTM, and other referenced standards covering material quality, inspection, and manufacturing processes. Contractors must register in Wide Area Work Flow for invoicing, and proposals must comply with secure-by-design principles and modular open systems architecture requirements. No contract clauses, special requirements, or detailed packaging and marking specifications are provided in the solicitation, leaving these to be defined during contract negotiation post-selection. All submissions must be received by 5:00 P.M. CDT on their respective
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

3 days ago

DEADLINE

in about 2 months
View Details
NAICS: 333332
Federal
Industrial 3D Printer Supply – Vector Spartan III or EquivalentThe contract entails the supply of a commercial off-the-shelf industrial 3D printer, specifically the Vector Spartan III or an equivalent model, intended for defense or industrial applications. The equipment must meet the technical and performance standards required for high-reliability environments, ensuring compatibility with mission-critical workflows under demanding operational conditions. The procurement is structured as a subcontract under the Department of Defense, with the agency designation W6QK Acc Rrad, and the place of performance is designated as Texarkana. The North American Industry Classification System code 333332 identifies the primary sector as industrial machinery manufacturing, underscoring the specialized nature of the hardware being procured. The solicitation was posted on May 7, 2026, and while no set-aside designation or specific sourcing restrictions are noted, the contract does not include detailed point of contact information or complete geographic details beyond the city of performance. The equipment must be readily available as a commercial product with proven field performance and without requirement for custom modifications, emphasizing efficiency and rapid deployment. The contract supports broader defense industrial base objectives by securing advanced additive manufacturing capabilities for in-house prototyping, tooling, or spare parts production within regulated operational settings.

POSTED

3 months ago

DEADLINE

N/A
View Details