Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Manufacture and Supply of Valve Parts Kit (NSN 4820015441071)

Active

Federal

Response Deadline09/11/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, issued by the Department of Defense Fluid Handling Division, requires the manufacture, packaging, labeling, and delivery of 24 units of a precision valve parts kit under NSN 4820015441071. The contractor must ensure all deliverables are compliant with military standards for packaging, marking, and traceability. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332911. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of September 11, 2026.

General Info

DoD subcontract for 24 precision valve kits, small business set-aside, due September 11, 2026.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332911 - Industrial Valve ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE7M4-26-T-375T.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PARTS KIT, VALVE

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 31

subcontract

Response DeadlineSep 11

Submission deadline

Response Deadline

09/11/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture, package, label, and deliver 24 units of a precision valve parts kit (NSN 4820015441071) compliant with military standards for packaging, marking, and traceability.

Similar Contracts

Same NAICS industry code

Precision Machined Piston Valve Component SupplyThe Department of Defense, through the DDSP New Cumberland Facility, is seeking a subcontractor for the manufacture and supply of a precision-machined piston valve component, identified by NSN 4820017071595. This component must be produced according to strict military specifications for integration into fluid control systems. The project falls under NAICS code 332911 and will be performed in New Cumberland, Pennsylvania. The solicitation was posted on August 31, 2026, with a response deadline of September 11, 2026. Interested parties can find further details and submit their responses through the DIBBS portal.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

VALVE, REGULATING, FLUID

Solicitation # SPE7MC-26-T-244D

This contract, identified as SPE7MC-26-T-244D, is for the procurement of 11 fluid pressure regulating valves with NSN 4820-01-734-3486 and part number JE10641-001 from Juniper Elbow Co. Inc. The items are to be delivered to DLA Distribution San Joaquin in Tracy, California, with a required delivery date of April 17, 2027. The delivery terms are FOB Origin, and the inspection and acceptance points are both set at the destination. The agreement incorporates specific technical and quality requirements, including DLA packaging standards and the prohibition of Class I ozone-depleting chemicals. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. This is designated as a critical application item, and the contractor must adhere to the specified quantity variance of plus or minus 0 percent.

DLA DIST SAN JOAQUIN

POSTED

about 6 hours ago

DEADLINE

DIAPHRAGM, VALVE, FLAT

Solicitation # SPE7MC-26-T-244R

This solicitation, issued by the DLA Dist San Joaquin under solicitation number SPE7MC-26-T-244R, is for the procurement of 32 flat valve diaphragms, identified by NSN 4820-01-431-9091. The contract requires delivery within 129 days after receipt of order and is categorized under NAICS code 332911. Performance is centered in Tracy, California, with a response deadline of September 11, 2026. Compliance requirements are stringent, necessitating adherence to DLA packaging standards and CMMC Level 2 certification. Because the item involves covered defense information and technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and have completed mandatory DLA export-control training and questionnaires to access the necessary technical data.

DLA DIST SAN JOAQUIN

POSTED

about 6 hours ago

DEADLINE

TAILPIECE, VALVE

Solicitation # SPE7M0-26-T-066P

This contract solicitation, numbered SPE7M0-26-T-066P, is issued by the Department of Defense Maritime Supply Chain ESOC Buys for the procurement of one valve tailpiece, identified by NSN 4820-01-719-0055. The requirement is subject to full and open competition with a delivery timeline of five days after order. The procurement allows for the use of additive manufacturing components or sub-processes in accordance with the design activity reference number or technical data package. The contract mandates strict adherence to DLA technical and quality requirements, including specific standards for packaging, quality conformance inspection, and the use of measuring and test equipment. It explicitly prohibits the use of Class I ozone depleting chemicals and requires the submission of metal certifications and certificates of quality compliance. Additionally, the technical data is subject to ITAR or EAR export controls, restricting access to approved contractors with valid US/Canada Joint Certification Program certification and completed export-control training.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 6 hours ago

DEADLINE

PLATE, ORIFICE, FLUID

Solicitation # SPE7M3-26-T-8751

This solicitation from the Department of Defense Fluid Handling Division is for the procurement of one fluid orifice plate, identified by NSN 4730-01-738-1964. The contract requires delivery within 20 days after receipt of order and specifies that inspection and acceptance will occur at the origin. Compliance with DLA packaging requirements and technical standards listed in the DLA Master List is mandatory. The item is subject to strict export controls under ITAR and EAR regulations, meaning technical data cannot be exported or disclosed to foreign persons without prior authorization from the Department of State or Commerce. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training. The solicitation is listed under number SPE7M3-26-T-8751 with a response deadline of September 11, 2026.

FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE7MC-26-T-244P

This contract is for the procurement of 25 ball valves, identified by NSN 4820014699990 and associated with Parker Hannifin Corporation part numbers 10500 PC 12B and 10578B. The order is designated as a critical application item and must adhere to strict quality and technical requirements, including the prohibition of intentionally added mercury or mercury-containing compounds in accordance with NAVSEA standards. The delivery is set for FOB Origin with a required delivery date of April 21, 2027, and a need ship date of February 16, 2027. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements, with the final destination for shipment being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will take place at the destination.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

VALVE, SOLENOID

Solicitation # SPE7MC-26-T-244A

This contract is for the procurement of one solenoid valve, identified by NSN 4810015331831 and part number 900-023-208/215 from The Raymond Corp. The item is to be delivered to the USS George H W Bush CVN 77 with a required delivery date of August 27, 2026, and a delivery window of 20 days after order. The shipment is FOB Origin with inspection and acceptance occurring at the destination. The agreement mandates strict compliance with mercury-free requirements, prohibiting the intentional addition of mercury except for specific functional exceptions such as batteries or sensors. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. The contract is issued by the Defense Logistics Agency under solicitation number SPE7MC-26-T-244A.

Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

VALVE, LINEAR, DIRECTION

Solicitation # SPE7M1-26-T-320S

This contract is for the procurement of linear directional control valves, specifically part number PC50430-500 under NSN 4810014554998. The requirement consists of multiple line items totaling seven units, with delivery specified as FOB Destination to the USS Makin Island (LHD 8). The delivery timeline is set for five days after the order, with required delivery dates ranging from August 28, 2026, to September 2, 2026. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. It explicitly prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. Shipments must be made via the fastest traceable means, and the use of parcel post is prohibited for these vessel shipments.

MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

VALVE, BUTTERFLY

Solicitation # SPE7M1-26-T-320Q

This contract is for the procurement of one butterfly valve, identified by NSN 4810014403873 and associated with Morpac Industries part numbers 10014 and 10014-5. The delivery is required within five days after the order, with FOB, inspection, and acceptance all set at the destination. The order is managed by the Maritime Supply Chain under the Department of Defense, specifically through solicitation SPE7M1-26-T-320Q. The supplier must adhere to strict technical and quality standards, including Item Unique Identification in accordance with MIL-STD-130 and DFARS 252.211-7003. Packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and DLA packaging requirements. Additionally, the contract prohibits the use of class I ozone depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except where specifically authorized for functional components.

MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

VALVE, SAFETY RELIEF

Solicitation # SPE7MC-26-T-244G

This contract is for the procurement of nine safety relief valves under solicitation SPE7MC-26-T-244G for the Department of Defense. The items are identified by NSN 4820017338593 and are designated as critical application items, with approved part numbers from Allied Systems Company and Parker-Hannifin Corporation. Delivery is required within 217 days, with a need ship date of April 17, 2027, and shipping is set as FOB Origin. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards such as ASTM D3951 and MIL-STD-129. All shipments must be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Additionally, the contract prohibits the use of Class I ozone depleting chemicals in the manufacturing or delivery of the valves, requiring any substitute chemicals to be submitted for official approval.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE7MC-26-T-244N

This contract is for the procurement of two check valves, identified by NSN 4820-01-435-8698, for the Department of Defense via DLA Dist San Joaquin. The items are designated as critical application and restricted source items, requiring engineering source approval by the government design control activity. The procurement specifies parts from Danfoss Power Solutions II, LLC, adhering to specific technical drawings and TDP Rev A Gen 1. The agreement mandates strict compliance with DLA technical and quality requirements, including the prohibition of Class I ozone-depleting chemicals and the restriction of intentionally added mercury. Delivery is set for 143 days after order, with a required delivery date of August 13, 2027, and a need ship date of February 2, 2027. Packaging must follow ASTM D3951 and MIL-STD-129 standards, with inspection and acceptance occurring at the point of origin.

DLA DIST SAN JOAQUIN

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE7MC-26-T-244C

This solicitation, identified as SPE7MC-26-T-244C, is issued by the Defense Logistics Agency for the procurement of two valve caps under NSN 4820-01-347-1517. The contract requires delivery within 222 days after the order is placed and is subject to full and open competition. Performance is centered in Tracy, California, with the procurement falling under NAICS code 332911. The agreement mandates strict adherence to DLA packaging and quality requirements, including CMMC Level 2 cybersecurity standards and the protection of covered defense information. Environmental restrictions prohibit the intentional use of mercury or Class I ozone-depleting chemicals, except where specifically authorized. Additionally, the contract is subject to stringent export controls under ITAR and EAR regulations, requiring contractors to have approved certifications and training to handle technical data.

DLA DIST SAN JOAQUIN

POSTED

about 6 hours ago

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

Packaging and Logistics for Government Shipment

Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

Supply of Spring Ring (NSN 1005011388127)

POSTED

about 6 hours ago

DEADLINE

SDVOSB Prime Contractor for Pipe Expansion JointsThis contract is a Service-Disabled Veteran-Owned Small Business set-aside for a prime contractor to manage the production and delivery of pipe expansion joints for the Department of Defense Fluid Handling Division. The selected contractor will be responsible for the full execution of the contract, including manufacturing, certification, compliance, and the management of any necessary subcontracting. The performance of this contract will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by September 11, 2026, in accordance with the requirements listed under NAICS code 332996.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

Packaging and Preservation Services (MIL-STD-2073-1E)The Fluid Handling Division of the Department of Defense is seeking a subcontractor for packaging and preservation services for pipe expansion joints. The scope of work requires the cleaning, drying, wrapping, and labeling of these components to ensure full compliance with MIL-STD-2073-1E standards for delivery preparation. This opportunity is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 493190. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by September 11, 2026.

Other Warehousing and Storage

POSTED

about 6 hours ago

DEADLINE

Technical Documentation and Certification ServicesThis subcontract for Technical Documentation and Certification Services is issued by the Department of Defense Fluid Handling Division. The primary objective is the preparation of Manufacturer Certification documentation, which must include test results, material traceability, and quality records to demonstrate full compliance with NAVSEA Drawing 3258421, Para 4.2. The opportunity is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 541330. The work is to be performed in New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of September 11, 2026.

Engineering Services

POSTED

about 6 hours ago

DEADLINE

Manufacture of Pipe Expansion Joints (NSN 4730012740807)This subcontract involves the manufacture and delivery of 14 pipe expansion joints under NSN 4730012740807 for the Department of Defense Fluid Handling Division. The contractor must adhere to NAVSEA Drawing 3258421, Paragraph 4.2, and ensure full compliance with DLA technical requirements, which includes completing all necessary qualification and acceptance testing. The opportunity is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 332996. Performance will take place in New Cumberland, Pennsylvania, with a response deadline of September 11, 2026.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

REPAIR KIT, INFLATAB

Solicitation # SPE7M4-26-T-375N

This contract is for the procurement of inflatable repair kits, identified by NSN 2090-01-717-6760 and part number E3520057. The total quantity requested is seven units across three separate purchase requests, with delivery required within 10 days after receipt of order. Shipments are destined for military installations at Camp Pendleton, California, and Camp Lejeune, North Carolina, and must be sent via traceable means rather than parcel post. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1 and MIL-STD-129. Key compliance requirements include a non-extendable 12-month shelf life and a total prohibition on the use of Class I ozone-depleting chemicals and the intentional addition of mercury. If the items contain hazardous materials, the offeror must provide a complete Material Safety Data Sheet and hazard warning labels in accordance with FED-STD-313.

Other Marine Fishing

POSTED

about 6 hours ago

DEADLINE

TUBE ASSEMBLY, METAL

Solicitation # SPE7M4-26-T-375U

This solicitation is for the procurement of one metal tube assembly, identified by NSN 4710-01-689-8194, for the Department of Defense Fluid Handling Division. The contract requires delivery within 20 days after receipt of the order. Due to the nature of the technical data associated with this item, the contract is subject to strict export controls under ITAR and EAR regulations. Access to this data is limited to DLA contractors who possess an approved US/Canada Joint Certification Program certification and have completed the required training and questionnaires. Compliance with DFARS 252.225-7048 is mandatory to prevent the unauthorized disclosure of technical data to foreign persons.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

ELBOW, PIPE TO TUBE

Solicitation # SPE7M3-26-T-8749

This contract is for the procurement of 74 packages of 90 degree pipe-to-tube elbows, identified by NSN 4730-00-834-2525 and part number MS51506A12. Each package contains two units. The hardware is specified as 3/4 inch cadmium plated steel with a 37 degree flared male tube end and a 3/4 inch NPTF right-hand female pipe end. This is designated as a critical application item and must comply with MS51506F specifications. The agreement mandates strict adherence to DLA packaging requirements, including ASTM D3951 and MIL-STD-129, with delivery to the DLA Distribution New Cumberland facility. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331. Notably, the use of class I ozone depleting chemicals is prohibited. Delivery is required within 212 days after receipt of order, with a required delivery date of April 12, 2027.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

TUBE ASSEMBLY, METAL

Solicitation # SPE7M4-26-T-333X

This contract is for the procurement of 12 metal tube assemblies under solicitation SPE7M4-26-T-333X for the Department of Defense Fluid Handling Division. The items must be manufactured according to Technical Data Package Revision A, General 1, based on basic drawing 10001 2902659 Revision H. Delivery is required within 161 days, with a need ship date of February 2, 2027, and a final required delivery date of April 12, 2027. The shipment is designated as FOB Origin and will be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. Compliance with several technical and environmental standards is mandatory. The contractor must adhere to DLA packaging requirements and MIL-STD-129 for marking. There is a strict prohibition against the intentional addition of mercury or mercury-containing compounds and the use of Class I ozone-depleting chemicals. Additionally, the contract requires the removal of government identification from any non-accepted supplies and mandates that covered defense information protocols be followed. Inspection and acceptance will take place at the destination.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M4-26-T-375R

This contract is for the procurement of 56 nonmetallic hose assemblies under solicitation SPE7M4-26-T-375R for the Department of Defense Fluid Handling Division. The items must adhere to NSN 4720-01-420-4116 with a delivery timeline of 143 days after the order is placed. A specific exception to drawing 12365278 is permitted, allowing the use of a standard Maylar tag with Gettig clear poly tape instead of the sleeving required by MIL-DTL-23053. The agreement incorporates several strict technical and quality requirements, including DLA packaging standards, physical identification marking, and the use of Qualified Products Lists or Qualified Manufacturers Lists. Contractors must maintain supply chain traceability documentation and comply with export control regulations under ITAR or EAR, which restricts the disclosure of technical data to authorized persons. Performance is centered in Anniston, Alabama, and the contract is subject to the DLA Master List of Technical and Quality Requirements.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

COUPLING BODY, TUBE

Solicitation # SPE7M3-26-T-8752

This contract is for the procurement of 192 packages of corrosion resistant steel tube coupling bodies with a 1/4 inch outer diameter for aircraft applications. Identified as a critical application item and a commercial product, the hardware must meet specific technical data and part number requirements from approved manufacturers such as Eaton Aeroquip, The Boeing Company, and SPS Technologies. The manufacturing process involves forging, and the contract strictly prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging. The order is managed under solicitation SPE7M3-26-T-8752 with a delivery timeframe of 152 days. Shipping is set as FOB Origin with inspection and acceptance occurring at the destination, specifically DLA Distribution Jacksonville. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. The contract is designated as a total small business set-aside under NAICS code 332996.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE