Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Manufacture of Airframe Flap Hinges

Active

Federal

Response Deadline09/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture of ten precision airframe flap hinges for prime contractors under SMSG Aviation Supply Chain projects. The fabrication must adhere to Basic Drawing NR 81205 6-83673 Revision C, as well as reference drawings BAC5423, BAC5435, and ST932. The parts are to be delivered without pilot or bolt holes, utilizing materials that comply with SAE AMS 4045 and surface finishes meeting ASME B46.1 standards. The project requires strict adherence to ISO 9001:2015 quality standards and compliance with the Buy American Act. Performance of the contract is located at Tinker AFB. The solicitation was posted on September 23, 2026, with a response deadline of September 30, 2026.

General Info

Manufacture ten precision airframe flap hinges at Tinker AFB per specified technical drawings.

Agency

Department Of Defense → SMSG AVIATION SUP CH CORPORATE LTC

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4AX-26-T-0112.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FLAP HINGE, AIRFRAME

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 23

subcontract

Response DeadlineSep 30

Submission deadline

Response Deadline

09/30/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → SMSG AVIATION SUP CH CORPORATE LTC

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → SMSG AVIATION SUP CH CORPORATE LTC

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures precision airframe flap hinges for prime contractors on SMSG Aviation Supply Chain projects. Fabricates parts per Basic Drawing NR 81205 6-83673 Revision C and reference drawings BAC5423, BAC5435, and ST932. Parts are furnished without pilot or bolt holes using materials complying with SAE AMS 4045 and surface finishes per ASME B46.1. Requires ISO 9001:2015 and Buy American Act compliance. Delivers 10 finished hinges.

Similar Contracts

Same NAICS industry code

Supply of Fuel Tank Liner (NSN 1560-01-121-5115)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

Manufacturing and Supply of Ring Spacers (PN 011767511)This subcontract involves the manufacturing and supply of precision-machined ring spacers, specifically Product Number 011767511, for prime contractors supporting DLA supply contracts. The fabrication process requires the use of CNC lathes and mills to meet strict technical specifications. Deliveries are to be made to CONUS Stock Locations under the oversight of the Department of Defense ASC Commodities Division. The contract is a Total Small Business Set-Aside under NAICS code 336413. Compliance requirements are stringent, necessitating a certified Quality Management System, adherence to Higher-Level Contract Quality Requirements, and strict supply chain traceability per clause C03. Additionally, the provider must ensure full compliance with DFARS 252.225-7001. The response deadline for this opportunity is October 15, 2026.

ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

Tail Rotor Blade Dust and Moisture Seal Boots

LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

24V Starter Repair Kit Component SupplyThis subcontract involves the manufacture and supply of individual component parts for 24V Starter Repair Kits, specifically identified by NSN 2920014677912, to support prime contractors delivering DLA supply contracts. The scope of work requires the production or sourcing of aviation engine starter components that adhere to strict technical specifications for 24V systems, while ensuring full compliance with the Buy American and Balance of Payments Program clauses. Managed by the Department of Defense under the Land Supplier Opns Engines agency, the contract falls under NAICS code 336413. The place of performance is located in New Cumberland, Pennsylvania. Interested parties must note the response deadline of October 5, 2026, for this procurement effort.

LAND SUPPLIER OPNS ENGINES

POSTED

about 12 hours ago

DEADLINE

Supply of SkyDex Technologies Aircraft Component (NSN 2540016597854)

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 12 hours ago

DEADLINE

Supply of Tee, Tube to Boss (NSN 4730000356574)This subcontract involves the supply of aerospace fittings, specifically the Tee, Tube to Boss (NSN 4730000356574), for C-5 aircraft under DLA Land and Maritime projects. Managed by the Department of Defense Fluid Handling Division, the contract requires the manufacture of hardware featuring Class 3 Threads and the use of precision threading equipment for critical application items. The contractor must adhere to strict quality and logistics standards, including marking per MIL-STD-129 and packaging according to RP001 and DLA specifications. Performance of the contract is centered at Robins Air Force Base, with a response deadline of October 5, 2026.

FLUID HANDLING DIVISION

POSTED

about 12 hours ago

DEADLINE

Manufacturer/Supplier of Ring Assembly, Cover (NSN 1025-00-493-9057)

LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

Supply of Radio Frequency Interference (RFI) FiltersThis subcontract involves the supply of six Radio Frequency Interference (RFI) filters, identified by NSN 5915-01-198-6264, for prime contractors under the Defense Logistics Agency. The project is managed by the Active Devices Division of the Department of Defense, with performance taking place at Robins Air Force Base. The contractor is responsible for sourcing or manufacturing the filters and ensuring all items are packaged according to RP001 DLA Packaging Requirements for Procurement. Additionally, the provider must manage all technical data in strict accordance with ITAR or EAR export compliance regulations.

ACTIVE DEVICES DIVISION

POSTED

about 12 hours ago

DEADLINE

Supply of Rigid Shaft Couplings (NSN 3010014190545)This subcontract involves the supply of ten rigid shaft couplings, identified by part number 25039-1027-1 and NSN 3010014190545, for prime contractors under DLA supply contracts. The items are designated as Critical Application Items and must be produced using aerospace-grade materials and precision machining. Delivery is set for DLA Distribution New Cumberland on an FOB Origin basis. The contractor must adhere to strict military standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for shipment marking. Additionally, the contract requires full compliance with DFARS 252.225-7048 and DFARS 252.223-7008. The project falls under NAICS code 336413 and is managed by the Department of Defense Land Supplier Operations for Wheeled Vehicles.

LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

about 12 hours ago

DEADLINE

DLA-Compliant Aerospace Packaging

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

Aircraft Structural Panel Fabrication

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

Supply of Aircraft Door (P/N 111T5159-502)

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 12 hours ago

DEADLINE

More opportunities from Department Of Defense → SMSG AVIATION SUP CH CORPORATE LTC

Same awarding agency

Third-Party Aerospace Inspection and SamplingThis subcontract for Third-Party Aerospace Inspection and Sampling supports SMSG Aviation Supply Chain projects at Tinker AFB. The selected provider will perform origin inspection and sampling for prime contractors, utilizing MIL-STD-1916 or ASQ H1331 Table 1 standards to verify critical, major, and minor attributes across specific AQLs. Additionally, the contractor must ensure part marking compliance with MIL-STD-130 and provide detailed inspection reports and certifications of conformance. Technical requirements include the use of NIST-calibrated equipment such as CMMs, calipers, and micrometers. The provider must demonstrate familiarity with FAR 52.246-2 and maintain ISO 9001:2015 certification. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense through SMSG Aviation Supply Chain Corporate LTC.

Testing Laboratories and Services

POSTED

DEADLINE

Aerospace Component Finishing (F-2A30)This subcontract for Aerospace Component Finishing (F-2A30) involves providing specialized surface treatment and finishing for machined airframe components, specifically coated flap hinge components, for prime contractors on SMSG Aviation Supply Chain projects. The work must be performed in accordance with the technical data package and Boeing specifications, utilizing industrial coating and plating equipment that meets military aerospace standards. The project is managed by the Department of Defense under the SMSG AVIATION SUP CH CORPORATE LTC and is to be performed at Tinker AFB. Compliance with ISO 9001:2015 and 29 CFR 1910.1200 hazardous material labeling is required. The solicitation was posted on September 23, 2026, with a response deadline of September 30, 2026, falling under NAICS code 332813.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

FLAP HINGE, AIRFRAME

Solicitation # SPE4AX-26-T-0112

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Supply of Halon Fire Extinguishant (NSN 6830-01-321-6527)This subcontract involves the supply of Halon fire extinguishant under NSN 6830-01-321-6527 for prime contractors supporting DLA Aviation supply contracts. The selected provider is responsible for sourcing the gas, providing all necessary traceability documentation, and managing packaging and shipping under F.O.B. Destination terms. To be eligible, the provider must maintain approved source status through Kidde-Fenwal, LLC or Kidde Technologies Inc. The contract falls under NAICS code 325120 and is managed by the Department of Defense through the SMSG Aviation Supply Chain Corporate LTC.

Industrial Gas Manufacturing

POSTED

DEADLINE

Supply of Halon Fire Extinguishant (NSN 6830-01-160-9653)This subcontract involves the supply of Halon fire extinguishant under NSN 6830-01-160-9653 for prime contractors supporting DLA Aviation. The selected provider must be an approved source via Kidde-Fenwal, LLC or Kidde Technologies Inc. and is responsible for providing all necessary traceability documentation to ensure technical acceptability. The contract requires the delivery of 420 units for the base period, with additional option quantities available. All packaging and shipping must be managed according to F.O.B. Destination terms. The opportunity is associated with NAICS code 325120 and is managed by the Department of Defense.

Industrial Gas Manufacturing

POSTED

DEADLINE

HALON, FIRE EXT

Solicitation # SPE4AX-26-R-0041

The Defense Logistics Agency (DLA) plans to award an Indefinite Delivery Contract with one base year and four optional years to support the procurement of critical fire-suppression components tied to NIINs 012545030, 011609653, and 013216527. This acquisition will proceed as Other Than Full and Open Competition due to the specialized nature of the requirements and the limited number of qualified entities. The Government will furnish all halon material directly to the awarded contractor, who must be capable of receiving, storing, processing, and certifying the halon for use in fire-suppression systems. Deliveries will be FOB Origin with Inspection and Acceptance conducted at the point of origin, ensuring timely and standardized readiness support across multiple Department of Defense platforms where no certified drop-in replacements are available. The contract award will be determined based on a combination of price, past performance, and other evaluation criteria outlined in the solicitation. Only three approved sources are recognized for these NIINs, all involving KIDDE-FENWAL, LLC or KIDDE TECHNOLOGIES INC in coordination with Marine Corps Systems Command or Naval Sea Systems Command. The solicitation, designated SPE4AX26R0041, will be issued around August 30, 2026, and is exclusively accessible through the DLA Internet Bid Board System (DIBBS); no paper copies will be provided. Responses are due by August 11, 2026, and the primary point of contact for inquiries is Darold Taylor of DLA Aviation in Richmond, Virginia. The North American Industry Classification System code for this procurement is 325120, indicating it relates to chemical manufacturing.

Industrial Gas Manufacturing

POSTED

DEADLINE

Supply of Miscellaneous Aviation Components (32 Additional NSNs)This subcontract involves the supply of 32 distinct aviation-grade components for prime contractors supporting Department of Defense projects through the DLA Aviation Supply Chain Corporate LTC. The contractor is responsible for sourcing, inspecting, and delivering these specific National Stock Numbers in strict accordance with the established Quality Matrix and Procurement Item Descriptions. All deliverables must meet domestic end product certification requirements and adhere to the packaging and marking standards specified in the Statement of Work. Quantities for these components are governed by the Schedule B Pricing Workbook. The solicitation was posted on August 19, 2026, with a response deadline of October 16, 2026, under NAICS code 423840.

Industrial Supplies Merchant Wholesalers

POSTED

about 1 month ago

DEADLINE

Manufacturing and Supply of Holder Assembly, Electrical Contact BrushThis subcontract involves the manufacture and supply of electrical contact brush holder assemblies, identified by NSN 5977-01-106-2173, for prime contractors supporting DLA Aviation projects under the Department of Defense. The contractor is responsible for producing assemblies that adhere to strict military aviation specifications and ensuring all items are packaged according to ASTM D3951 standards. Additionally, the provider must supply domestic end product certification and maintain the capacity to meet both surge and sustainment requirements. The scope of work includes the delivery of 150,000 units for the base period, with additional option quantities available. This opportunity falls under NAICS code 335311 and is managed by the SMSG Aviation Supply Chain Corporate LTC. Interested parties must respond by the deadline of October 16, 2026.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 1 month ago

DEADLINE

HOLDER ASSEMBLY, ELECTRICAL CONTACT BRUSH

Solicitation # SPE4AX-26-R-0010

Solicitation SPE4AX-26-R-0010 is a sealed bid invitation for a long-term, firm fixed-price requirements contract issued by DLA Aviation to support military service managed spare parts. The procurement is intended as a sole-source award to the Moog, Inc. manufacturing facility in Blacksburg, Virginia. The total period of performance is ten years, divided into a five-year base period and a five-year option period. The initial award identifies a population of 33 NSNs, specifically highlighting the procurement of 150,000 units of Holder Assembly, Electrical Contact Brush (NSN 5977-01-106-2173) with a delivery lead time of 90 days. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 for palletization, with the DLA Master List of Technical and Quality Requirements taking precedence. Higher-level quality requirements are enforced via FAR 52.246-11. Inspection and acceptance will occur at the source (origin). Administrative requirements include the use of the Wide Area Workflow (WAWF) system for electronic invoicing and payment. Proposals must include a completed pricing workbook, a capability assessment plan, and a small business subcontracting plan. Award will be based on the lowest offered unit prices for the specified quantity increments.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 1 month ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS