Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Manufacture of Aluminum Ventilation Ducting (6", 8")

Active

Federal

Response Deadline08/06/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the fabrication of 6-inch and 8-inch diameter rigid aluminum ventilation ducts with corrosion-resistant finishes that meet naval dimensional and performance standards. The work must be completed in accordance with military specifications to ensure durability and compatibility with naval ventilation systems. The ducts will be manufactured to exacting tolerances, emphasizing structural integrity, airflow efficiency, and resistance to environmental degradation in maritime conditions. This is a Small Business Set Aside contract under NAICS code 332312, reserved exclusively for small businesses. The solicitation was posted on August 4, 2026, and responses are due by August 6, 2026. The place of performance is in Kittery, Maine, with the Department of Defense through DLA Maritime - Portsmouth serving as the overseeing agency. All submissions must comply with federal subcontracting requirements, and the award will prioritize qualified small business vendors capable of meeting the technical and logistical demands of naval-grade ventilation components.

General Info

Small business to fabricate naval-standard aluminum ducts in Kittery, Maine, by August 6, 2026.

Agency

Department Of Defense → DLA Maritime - PortsmouthView Agency

NAICS

332312 - Fabricated Structural Metal ManufacturingView NAICS

Place of Performance

Kittery, ME, 03904, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 07:00:00 PM UTCin about 19 hours

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Maritime - Portsmouth

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA Maritime - Portsmouth

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabrication of 6" and 8" diameter rigid aluminum ventilation ducts with corrosion-resistant finishes, meeting naval dimensional and performance standards.

Similar Contracts

Same NAICS industry code

Steel Fabrication and Erection

ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Structural Steel Fabrication

NUCLEAR REACTOR PROGRAM

POSTED

about 7 hours ago

DEADLINE

Structural Steel Fabrication

Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

BAFFLE, FLUID COOLER, IN

Solicitation # SPE8E8-26-T-5028

The contract pertains to the procurement of 201 units of a baffle for a fluid cooler, identified by NSN 4420-01-612-5942 and part number PA12652373, supplied by Fairbanks Morse, LLC. Delivery is required within 167 days of contract award, with shipment originating FOB origin and inspection and acceptance occurring at the destination. The packaging must comply with MIL-STD-2073-1E, including specific preservation methods and materials, and marking must adhere to MIL-STD-129 with no special marking codes applied. Palletization follows DLA packaging requirements, and the final delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania. The unit of issue is each, with a total contract value of $201.00 per unit, totaling $40,401. The procurement is governed by DLA technical and quality requirements referenced through the Master List, and the solicitation was issued under contract number SPE8E8-26-T-5028 with an original required delivery date of November 17, 2026, and a need ship date of February 1, 2027. The solicitation closed on August 17, 2026, and was posted on August 5, 2026, with the primary point of contact being Alexis Selby of the Department of Defense.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 7 hours ago

DEADLINE

CONTRACTOR FIRST ARTIC

Solicitation # SPE8E6-26-T-4035

The contract is for the procurement of 30 units of a shock absorbing ski with NSN/Part Number 0001S00000053, issued under solicitation SPE8E6-26-T-4035, which is a Total Small Business Set-Aside. The delivery schedule requires fulfillment within 407 days after contract award, and the response deadline for submissions is August 17, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed. The item includes technical data subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, and requiring strict adherence to DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and prior approval from DLA. The place of performance is New Cumberland, Pennsylvania, with the contracting office under the Department of Defense’s DDSP New Cumberland Facility. The primary point of contact is Sophia Lim, reachable via email and phone provided.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 7 hours ago

DEADLINE

CORE ASSEMBLY, FLUID

Solicitation # SPE8E8-26-T-5050

The contract pertains to the procurement of a CORE ASSEMBLY, FLUID with the NSN 4420-01-587-9429, quantity of twelve units, under solicitation number SPE8E8-26-T-5050. The delivery timeline is set for 167 days after award, with the solicitation issued on August 5, 2026, and responses due by August 17, 2026. This procurement falls under NAICS code 332312 and is managed by DLA Dist San Joaquin on behalf of the Department of Defense, with performance located in Tracy, California, ZIP 95304-5000. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions determined by the solicitation or award date depending on acquisition size. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware, with exceptions permitted for functional uses in batteries, fluorescent lights, specific instruments, weapon systems, and chemical reagents designated by NAVSEA. Portable devices containing mercury must be shock-proof and equipped with a secondary containment boundary per NAVSEA 5100-003D. The attached drawing is for reference only and does not define requirements. Primary point of contact is Alexis Selby, reachable via email and phone provided.

DLA DIST SAN JOAQUIN

POSTED

about 7 hours ago

DEADLINE

Exterior Door Supply and DeliveryThe contract involves the supply and delivery of new exterior doors for a school site, with strict requirements for performance standards including resistance to weather conditions, enhanced security features, and full compliance with the Americans with Disabilities Act. All doors must meet specified durability and accessibility criteria to ensure long-term functionality and safety in an educational environment. The work is classified as a subcontract under NAICS code 332312, indicating manufacturing of metal doors and frames, and the procurement is managed by the BOE Maintenance organization in Connecticut. The solicitation was posted on August 5, 2026, with a firm deadline for responses set for September 1, 2026, at 6:00 PM. Delivery must be completed at the designated school location, though specific city or address details are not provided. No set-aside provisions or special contracting preferences are indicated, and the process is open to qualified subcontractors. All proposals must demonstrate capability to fulfill technical, regulatory, and logistical requirements as outlined in the procurement.

BOE Maintenance

POSTED

about 8 hours ago

DEADLINE

MISSISSIPPI RIVER BASIN, LOCK AND DAM 21, QUINCY, IL, BOLTED TAINTER GATE FABRICATION

Solicitation # W912EK26Z1BZ6

The contract requires the fabrication, painting, and delivery of bolted Tainter gates to Lock and Dam 21 in Quincy, Illinois, with all work performed under strict adherence to AWS D1.1 welding standards and no fracture critical members permitted. Fabrication may occur outside the contractor’s shop or at a third-party location as long as enclosure specifications are met. Gates must be delivered by barge to the site, with final inspection and acceptance occurring upon arrival at the destination, governed by F.O.B. Destination terms. The contract is structured as a Firm Fixed Price with six optional increments beyond the base award, each extending the delivery timeline by 150 days, and delivery is prohibited from January 1 to March 30 with no weather-related time extensions allowed. All items must be uniquely identified using a machine-readable UII per MIL-STD-130 encoded per ISO/IEC 15434 and labeled on shipping containers in compliance with MIL-STD-129. Packaging and preservation requirements specify protective packaging for self-lubricated components, controlled storage for paints and coatings (non-exceeding 5 gallons, protected from temperature extremes), and environmentally controlled conditions for rubber and elastomeric materials to prevent degradation. Quality control is mandatory with a certified plan incorporating AISC Quality Certification and compliance with paint and welding specifications. The contractor must provide all commercial warranties and pass through subfabricator warranties. Submission of shop drawings, product data, samples, test reports, and field reports is required, and all testing must use calibrated equipment with results submitted within seven days. The offeror must comply with E-Verify and Form I-9 requirements, submit security documentation in sealed format, and adhere to OPSEC and antiterrorism protocols. Proposals must be submitted electronically by September 1, 2026, via email in PDF format, with large files uploaded through a secure portal. A pre-solicitation conference was held on June 30, 2026, and questions on draft documents were due by June 26, 2026. The contractor is responsible for all quality and compliance, with final acceptance authority held by the Government. All items must be reported in the Wide Area WorkFlow system, and the contract contains no monetary values or estimated value provided within the documentation.

Endist Rock Island

POSTED

about 12 hours ago

DEADLINE

Cannelton Lock and Dam - culvert valve assemblies

Solicitation # W912QR-61396929

Contractors holding MATOC Pool contracts W911WN23D0001 through W911WN23D0007 are invited to submit a price proposal for the removal, fabrication, and installation of two culvert valve assemblies at Cannelton Lock and Dam in Indiana. Each assembly includes a strut arm, bell crank, culvert valve, pins, valve bearing blocks, and ancillary components as detailed in the plans. Work scope encompasses unwatering and maintaining a dry environment within the culvert valve chamber during installation, followed by rewatering, and may include disposal of removed components in accordance with demolition and deconstruction specifications. The estimated project value falls between five and ten million dollars. Award will be made based on the lowest evaluated price, and proposals must remain open for acceptance for a minimum of 60 calendar days from the due date. All submissions must be made electronically via the Procurement Integrated Enterprise Environment Solicitation Module, and must be received by 11:00 AM EDT on Monday, September 7, 2026. Proposals not submitted through PIEE or received after the deadline will be rejected. Inquiries must be submitted exclusively through the ProjNet system using the provided bidder key, and no questions will be addressed during the mandatory site visit. All vendors must be registered in SAM.gov to access the solicitation documents, which are available only through that portal using solicitation number W912QR-61396929. This is a Small Business Set Aside, with the North American Industry Classification System code 332312, and the contracting office is located in Louisville, Kentucky.

W072 Endist Louisville

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Gap Fencing - RAF Akrotiri

Solicitation # FA557026Q0022

This solicitation seeks a firm-fixed price solution to close a gap in the flightline fence at RAF Akrotiri, Cyprus, requiring the procurement and installation of two 191-foot-wide swing gates with a height of 6 to 7 feet, chain-link infill, mill finish, and manual operation via bottom wheels for smooth movement. The gates must include reinforced anchor posts and a securing mechanism such as a latch or chains to prevent swinging or bulging, with no trenching or rail installation permitted. The solution does not require crash rating, but the wheels must accommodate minor elevation changes. Proposals must be submitted via email by 1600 GMT+2 on 14 August 2026 and must include pricing that clearly states the total contract value, technical specifications, installation methodology, and a projected completion timeline. The technical documentation is limited to 20 pages and must be submitted separately from pricing. All offerors must maintain an active SAM registration and provide their NCAGE or CAGE code, along with the Unique Entity Identifier, and comply with mandatory representations and certifications including those related to defense information safeguarding, prohibitions on certain foreign procurements, human trafficking, and former DoD official compensation. The government will conduct a comparative evaluation based primarily on technical capability and price, favoring offers that exceed minimum standards through durability, warranty, past performance, and delivery timelines, with award going to the most advantageous offer—typically the lowest priced if no proposals exceed minimum criteria. Payment will be processed through WAWF using specified DoDAAC codes, with the service acceptor and inspecting authority both designated at FA5570 and FA5770 respectively. A voluntary site visit is scheduled for 11 August 2026 at 1400 local time in Cyprus, and attendance requires prior coordination with the point of contact, David T. Bartilson, via email. The place of performance and acceptance is FB4524 DET I9 OG LGS/CONS, BLDG I051B, RAF Akrotiri, Cyprus, with all supplies deliverable either directly to that location or shipped into Cyprus by the contractor. The contract includes extensive compliance clauses covering cybersecurity, telecommunications equipment restrictions, hexavalent chromium, regional procurement bans, and prohibition on detention interrogations, with Deviation 2026-00038 applied to multiple FAR and DFAR clauses governing offeror identity, subcontracting, protest rights, and security exclusions.

FA5570 501 Csw Rco

POSTED

about 12 hours ago

DEADLINE

Smithland Locks and Dam Machinery House Cover - Supply

Solicitation # W912QR26QA074

The contract solicitation for the Smithland Locks and Dam Machinery House Cover - Supply is issued under solicitation number W912QR26QA074 and is set aside exclusively for small businesses as a total set-aside under the SBA program. The NAICS code 332312 indicates the work relates to fabricated metal product manufacturing, specifically requiring the supply of a cover structure for the machinery house at the Smithland Locks and Dam. The solicitation is classified as combined, meaning it may incorporate elements of both purchase and service requirements. Proposals must be submitted by August 20, 2026, at 5:00 PM Eastern Time, with the opportunity posted on August 5, 2026. The contract is managed by the U.S. Army Corps of Engineers, Office of the District Engineer in Louisville, Kentucky, under the Department of Defense. All correspondence and inquiries should be directed to Jennifer King, the primary point of contact, reachable at 502-315-6166 or jennifer.l.king2@usace.army.mil. The office is located at 40202-2230, Louisville, KY. The place of performance is not specified in the data provided, but the cover is intended for installation at the Smithland Locks and Dam facility, which implies logistics and delivery requirements will be critical to the award decision. Bidders are expected to comply with all federal contracting regulations applicable to small business set-asides and Defense Department procurement standards.

W072 Endist Louisville

POSTED

about 12 hours ago

DEADLINE

Structural Steel Fabrication and ErectionThe contract titled Structural Steel Fabrication and Erection is a subcontract under the Board of Regents of the University System of Georgia, specifically managed by Georgia, for the fabrication and on-site assembly of structural steel members. The solicitation was posted on August 4, 2026, with a response deadline of August 25, 2026, at 7:00 PM. The North American Industry Classification System code 332312 indicates the work falls under Structural Metal Fabrication, requiring specialized expertise in designing, cutting, shaping, and assembling steel components according to engineering specifications. The place of performance is not specified in the provided details, but the work will occur at a site under the jurisdiction of the Georgia university system. All submissions must be completed by the stated deadline, and the contract will be awarded based on compliance with technical, safety, and scheduling requirements typical of public infrastructure projects. The absence of a set-aside classification suggests the opportunity is open to all qualified subcontractors regardless of business size or owner characteristics.

Board Of(university System of Georgia) Regents

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Maritime - Portsmouth

Same awarding agency

Manufacture and Supply of Square Mesh Safety NetsThe contract calls for the manufacture and delivery of 45 square mesh safety nets constructed from knotless rope composed of either Black Nylon or high-tenacity Polypropylene, meeting specific naval standards for durability and performance. The nets must be produced to precise specifications to ensure they fulfill safety requirements in marine and defense environments. The work is designated as a Small Business Set Aside under the SBA program, meaning only eligible small businesses may bid, and the NAICS code 313210 indicates the project falls under the manufacturing of textiles for industrial and technical uses. Performance is required at Kittery, Maine, with a zip code of 03904, and all delivered items must conform to the quality and compliance benchmarks established by the Department of Defense. The contract is managed by DLA Maritime - Portsmouth under the U.S. Department of Defense and was posted on August 4, 2026, with a firm response deadline of August 14, 2026, at 8:00 PM Eastern Time. It is classified as a subcontract, suggesting it is part of a larger procurement structure, but suppliers must still meet all technical, delivery, and compliance obligations outlined in the solicitation. While no point of contact is listed, interested parties are expected to review the official SAM.gov link for full details, including evaluation criteria, submission guidelines, and any additional technical requirements not specified in the summary. All work must be completed in accordance with federal procurement regulations applicable to defense contracts and small business participation.

Broadwoven Fabric Mills

POSTED

DEADLINE

Packaging, Labeling, and Logistics SupportThe contract requires full compliance with MIL-STD-129 standards for packaging and labeling of all duct types destined for delivery to the Defense Logistics Agency Maritime at the Portsmouth Naval Shipyard. This includes implementing QA-4 quality assurance documentation and embedding Unique Item Identifiers (UII) with RFID technology on all units to ensure traceability and inventory accuracy throughout the supply chain. The contractor must coordinate all logistics activities from packaging completion through final shipment, ensuring timely and secure delivery to the specified location in Kittery, Maine, with a zip code of 03904. All activities must align with federal defense logistics protocols and maintain strict adherence to U.S. Department of Defense requirements. This is a small business set-aside subcontract under NAICS code 561910, focused on packaging and labeling support services, and is administered by the Department of Defense through DLA Maritime. The solicitation was posted on August 4, 2026, with responses required by August 6, 2026, at 7:00 PM, leaving a narrow window for submission. The place of performance is fixed at Kittery, and all work must be executed to meet exacting military standards without deviation. Failure to comply with UII, RFID, or MIL-STD-129 requirements will result in rejection of deliverables, making technical precision and process validation critical for successful contract performance.

Packaging and Labeling Services

POSTED

DEADLINE

in about 19 hours

Supply of 20" Insulated Flex DuctingThe contract seeks the supply of 20-inch insulated flexible ventilation ducting specifically designed for shipboard HVAC systems, with requirements for fire-resistant and crush-resistant construction to meet rigorous marine operational standards. The ducting must be packaged according to detailed specifications to ensure integrity during transport and installation. This is a small business set-aside subcontract under the SBA program, exclusively available to qualified small businesses, and is tied to the NAICS code 332311 for sheet metal work. The opportunity was posted on August 4, 2026, with a strict response deadline of August 6, 2026, at 7:00 PM Eastern Time. Performance will be carried out at Kittery, Maine, with a zip code of 03904, under the auspices of DLA Maritime - Portsmouth, a division of the Department of Defense.

Prefabricated Metal Building and Component Manufacturing

POSTED

DEADLINE

in about 19 hours

Manufacture of R-3 Blue 14" Insulated Ventilation DuctThe contract calls for the manufacture of 14-inch R-3 Blue insulated ventilation ducts, featuring thermal insulation and a color-fast blue outer jacket, designed to meet rigorous naval standards for dimensional accuracy, fire resistance, and thermal performance. The product must adhere to exacting military specifications to ensure reliability and safety in demanding maritime environments, with the insulation and outer layer engineered to withstand extreme conditions while maintaining structural integrity and visual consistency over time. This is a small business set-aside subcontract under NAICS code 326220, issued by DLA Maritime - Portsmouth under the Department of Defense, with a response deadline of August 6, 2026, and a place of performance located in Kittery, Maine, zip 03904. The solicitation is open to eligible small businesses, and the work will supply critical ventilation components for naval applications, requiring strict compliance with all technical and regulatory requirements established by the Department of Defense.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

in about 19 hours

Manufacture of Rigid Plastic Ventilation Ducting (TR-FR Series)The contract entails the manufacture and delivery of rigid plastic ventilation ducting in 4 inch, 6 inch, and 8 inch diameters from the TR-FR series, in black and blue coloration, adhering to either military or commercial specifications. The products must be properly packaged and shipped to the Portsmouth Naval Shipyard located in Kittery, with a zip code of 03904. This is a small business set aside subcontract, meaning only eligible small businesses can respond, and it falls under the NAICS code 326220 which corresponds to plastic pipe and pipe fitting manufacturing. The solicitation was posted on August 4, 2026, with a strict response deadline of August 6, 2026, at 7:00 PM, leaving a narrow window for submissions. The contracting activity is managed by DLA Maritime under the Department of Defense, emphasizing the defense-related nature of the procurement.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

in about 19 hours

FOB Destination Delivery to Portsmouth Naval Shipyard

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

MIL-STD-129 Compliant Packaging and Labeling

Other Warehousing and Storage

POSTED

DEADLINE

Ruggedized Magnetic Switch Manufacturing

Other Electronic Component Manufacturing

POSTED

DEADLINE

SQUARE MESH SAFETY NET

Solicitation # SPMYM326Q8033

The Portsmouth Naval Shipyard, under the Department of Defense and managed by DLA Maritime, is soliciting quotes for 45 units of Square Mesh Safety Net under a total small business set-aside, with theNAICS code 313210 and a small business size standard of 1,000 employees. This solicitation, identified as RFQ SPMYM326Q8033, is issued as a combined synopsis/solicitation under FAR Part 12 and Simplified Acquisition Procedures per FAR Part 13, with no paper copies available and all submissions required to be made electronically. Evaluation will be conducted using the Lowest Price Technically Acceptable method, with vendor responsibility determined through the Supplier Performance Risk System (SPRS) and FAR 9.104 criteria. All responsible small business concerns may respond, but must be currently registered in the System for Award Management (SAM), include their CAGE code, business size, point of contact, and indicate preferred payment method—either Government Commercial Purchase Card (GCPC) or Wide Area Workflow (WAWF)—while confirming compliance with all technical specifications in Attachment 1 and required clauses. The contract incorporates a comprehensive set of FAR, DFARS, and DLAD clauses, including cybersecurity requirements such as 252.204-7012 and 252.240-7997, antitrafficking provisions, child labor protections, buy American and trade agreement certifications, prohibitions on procurement from the Xinjiang Uyghur Autonomous Region, and restrictions on certain telecommunications equipment. Additional local provisions require compliance with mercury control, prohibited packing materials, shipment marking, inspection at destination, and consignment instructions specific to Portsmouth Naval Shipyard. Offers must include manufacturer details if not the producer, and must be submitted via email to sam.j.aiguier.civ@us.navy.mil and PNSYSupplyQuotations@us.navy.mil by August 14, 2026, at 4:00 PM EST. Payment terms are net 30 days after acceptance, and the Government does not accept third-party payment platforms. Failure to complete and submit required provisions 252.204-7016 and 252.204-7019 will result in non-responsiveness.

Broadwoven Fabric Mills

POSTED

DEADLINE

IDIQ for Ventilation Ducting - 11 various items, 4 years

Solicitation # SPMYM326Q3115

The Portsmouth Naval Shipyard is soliciting qualified small businesses to provide ventilation ducting across eleven different items under a four-year indefinite-delivery/indefinite-quantity contract, with the solicitation number SPMYM326Q3115. This procurement is fully set aside for small businesses under the SBA’s Total Small Business Set Aside program and falls under NAICS code 326220. The contract requires manufacturers to produce ventilation ducting strictly in accordance with specified technical requirements, and participation will be determined through a reverse auction process expected to occur on or around August 7, 2026. Interested parties must submit their responses by the deadline of August 6, 2026, at 7:00 PM Eastern Time. The contract will be managed by the DLA Maritime - Portsmouth office, located in Portsmouth, New Hampshire, with performance taking place in Kittery, Maine. Primary point of contact is Emily Kritzman, with supplementary inquiries directed to the DLA-KME PNSY EMAIL BOX.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

in about 19 hours

VLS RUGGEDIZED DESIGN SWITCH

Solicitation # SPMYM326Q6073

This solicitation, issued under the combined synopsis/solicitation format in accordance with FAR Part 12 and Simplified Acquisition Procedures, seeks a single proximity switch—specifically a VLS ruggedized design magnetic switch with DPDT parallel wiring—manufactured exclusively by Powertronics Systems Florida Inc., AMETEK SCP, or TE Connectivity. The requirement is brand name mandatory due to the necessity of direct part number replacement for existing systems, and quotes from any other manufacturer will be rejected. The item, identified by part number 655792 and drawn to DWG 6557925/D with attached modifications, is needed in a quantity of 12 units, with a total of one line item under FSC 5930 and NAICS code 334419, subject to a small business size standard of 750 employees. Evaluation will follow the Lowest Price Technically Acceptable (LPTA) method, with vendor responsibility assessed through the Supplier Performance Risk System (SPRS) and FAR 9.104 standards. Offerors must submit descriptive literature verifying compliance with all technical specifications and, if not the manufacturer, provide proof of traceability including the original manufacturer’s name, location, and business size. All submissions must include completed provisions 252.204-7016 and 252.204-7019, along with pricing, FOB point, CAGE code, point of contact details, business size under NAICS 334419, GSA contract information if applicable, and preference for Government Commercial Purchase Card (GCPC) or Wide Area Workflow (WAWF) payment, noting that payment terms are Net 30 days after acceptance. Quoters must be currently registered in SAM.gov and submit responses via email to the designated points of contact by the August 20, 2026, deadline. Numerous FAR, DFARS, and DLA clauses apply, including cybersecurity requirements such as NIST SP 800-171, Cybersecurity Maturity Model Certification, and safeguarding of covered defense information, as well as Buy American, Trade Agreements, and prohibited sourcing provisions related to Xinjiang. Additional local clauses govern shipment marking, packaging restrictions, inspection at destination, consignment instructions, and single award conditions. The requirement is unrestricted to full and open competition with no set-aside, and the Portsmouth Naval Shipyard in Kitter

Other Electronic Component Manufacturing

POSTED

DEADLINE

Federal Contract Compliance & Representation SupportThe contract seeks support services to assist a prime contractor in meeting federal representation and compliance obligations, with a focus on FAR 52.204-26 requirements and accurate maintenance of small business and socioeconomic certifications such as Women-Owned Small Business, Service-Disabled Veteran-Owned Small Business, and HUBZone status. This subcontract is designed to ensure the prime contractor remains in full alignment with federal reporting and certification standards throughout project performance, minimizing risk of noncompliance and credential misrepresentation. Performance is expected to be based in Kittery, with a NAICS code of 541611 indicating management, scientific, and technical consulting services as the primary category. The contract is issued under the Department of Defense, specifically by DLA Maritime - Portsmouth, and is open for submission with a deadline of August 11, 2026. The solicitation does not specify a set-aside type, indicating it may be open to all eligible small business concerns, and the work is intended to directly support federal contractual obligations rather than deliver a distinct product or service.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE