Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Manufacture of Critical Safety Item (CSI) Sleeve Bearings

Active

Federal

Response Deadline09/30/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the Department of Defense, specifically Navsup Weapon Systems Support Mech, involves the manufacture of precision sleeve bearings identified by NIIN 016438857 for US Navy projects. The selected provider must perform precision machining and fabrication according to the Technical Data Package, develop Inspection and Test Plans per DI-QCIC-81110, and adhere to Special Emphasis Level I quality standards. The contract requires strict compliance with FAR 52.246-11 and the use of PKI Digital Certificates for ECDS submissions. Deliverables include the finished bearings and corresponding Critical Safety Item certifications. The response deadline for this opportunity is September 30, 2026.

General Info

DoD subcontract for manufacturing precision sleeve bearings for US Navy by September 30, 2026.

Agency

Department Of Defense → Navsup Weapon Systems Support MechView Agency

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0010426QFG41.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BEARING,SLEEVE

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 31

subcontract

Response DeadlineSep 30

Submission deadline

Response Deadline

09/30/2026, 08:30:00 PM UTCin 18 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Navsup Weapon Systems Support Mech

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures precision sleeve bearings (NIIN: 016438857) for prime contractors on US Navy projects. Performs precision machining and fabrication per the Technical Data Package, develops Inspection and Test Plans per DI-QCIC-81110, and ensures compliance with Special Emphasis (Level I) quality standards. Requires FAR 52.246-11 compliance and PKI Digital Certificates for ECDS submission. Delivers finished bearings and CSI certifications.

Similar Contracts

Same NAICS industry code

Supply of Bearing Seats (NSN 3110017260056)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Fluid Filter Elements (NSN 2910-01-432-0371)

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Supply of Fluid Filter Elements (NSN 2940017361620)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Liquid Pump Housing Supplier

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

BUSHING, SLEEVE

Solicitation # SPE4A6-26-T-26NV

Solicitation SPE4A6-26-T-26NV, issued by the DLA Aviation ASC Commodities Division, is a request for the procurement of 263 units of sleeve bushings (NSN 3120-00-242-8431). This item is designated as a critical application item and may require special tooling or casting and forging for manufacture. The procurement is governed by NAICS code 332991, with delivery required FOB Origin to DLA Distribution Warner Robins by a need ship date of November 15, 2026, and a final required delivery date of January 16, 2027. The contract mandates strict adherence to technical drawings 98897 4F02057, 98897 STP51-400V01, and 98897 DS5025. Quality requirements include compliance with SAE AS9003 or ISO 9001, with inspection and acceptance occurring at the origin. Packaging must follow MIL-STD-2073-1E, requiring each sleeve to be wrapped in neutral paper, and marking must comply with MIL-STD-129. The solicitation includes significant regulatory requirements, including ITAR and EAR export controls, the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Payment and invoicing must be processed through Wide Area WorkFlow (WAWF). Evaluation for award may include a price preference for certified HUBZone small businesses, and the government explicitly prohibits the use of additive manufacturing for these items. Quotations were due by September 11, 2026, and the buy is identified as a potential candidate for automated award.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-75B7

Solicitation SPE4A6-26-T-75B7 is a fixed-price request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of bearing seats. The requirement identifies the item as a critical application item, specifically NSN 3110017260056 and Macartney Inc part number 0031040708-195. The procurement consists of two line items: one unit for CLIN 0001 and three units for CLIN 0002. Delivery is required within 20 days after the order, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination in Port Hueneme, California. The contractor must adhere to stringent technical and quality standards, including MIL-DTL-197/M for preservation and packaging, MIL-STD-2073-1E for packaging data, and MIL-STD-129 for marking. Additional requirements include compliance with DLA packaging standards RP001 and specific bare item marking under RQ017. Administrative requirements mandate the use of the Wide Area WorkFlow system for invoicing and payment. The solicitation also incorporates various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements. Quotations were due by June 8, 2026, via the DIBBS system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture of Breech Cap Assembly (NSN 1095-00-878-4911)

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Supply of Fluid Filter Elements (NSN 2940-00-678-5357)

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Supply of Annular Ball Bearings (NSN 3110-00-921-3356)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

31--BEARING,BALL,THRUST

Solicitation # SPE4A6-26-T-28QU

The Department of Defense, through the ASC Commodities Division of DLA Aviation, has issued Request for Quotation SPE4A6-26-T-28QU for the procurement of 149 thrust ball bearings under NSN 3110001590943. This is a fixed-price contract with a delivery requirement of 263 days after award, with the items to be delivered to the DLA Distribution Depot Oklahoma. The solicitation is open for electronic submissions via the DIBBS system until September 18, 2026. This procurement is designated as an Air Force Critical Safety Item and carries strict domestic sourcing requirements; awards will only be made for bearings manufactured in the United States, its outlying areas, or Canada. Additionally, offers utilizing additive manufacturing processes are ineligible for award. Quality compliance is mandatory, requiring manufacturers to adhere to SAE AS9100 or an equivalent standard, while dealers and distributors must comply with AS9120. The contract specifies inspection and acceptance at the point of origin and utilizes the First Destination Transportation program. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, respectively. All payment requests and receiving reports must be processed through the Wide Area WorkFlow system. The procurement falls under NAICS code 332991 and incorporates various FAR and DFARS clauses, including those regarding the Buy American Act and the safeguarding of covered defense information.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

31--BUSHING,SLEEVE

Solicitation # SPE4A6-26-T-28RJ

Solicitation SPE4A6-26-T-28RJ is a fixed-price request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 34 sleeve bushings (NSN 3120011153346). The procurement falls under NAICS code 332991 and requires quotes to be submitted electronically via the DIBBS portal by September 18, 2026. The approved source for this item is 62983 393102. Delivery is required within 170 days after order, with a need ship date of March 8, 2027, and a final delivery destination of DLA Distribution San Joaquin in Tracy, California. The contract mandates strict quality and packaging standards, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Packaging must adhere to MIL-STD-2073-1E, with each sleeve wrapped in neutral paper to prevent damage, and marking must follow MIL-STD-129. Inspection and acceptance will occur at the point of origin. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and compliance with the Buy American Act and Berry Amendment. The procurement is managed by Buyer Shalonda Davis.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

31--BEARING,BALL,ANNULAR

Solicitation # SPE4A6-26-Q-1426

Solicitation SPE4A6-26-Q-1426 is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 527,000 annular ball bearings (NSN 3110-00-921-3356). This is a source-controlled drawing item requiring conformance to Basic Drawing 73030 541956, Revision D, and Reference QAP 13873 QAP-B02, Revision B. The items are to be delivered to DLA Distribution Cherry Point within 268 days after receipt of the order. The procurement is set aside for small businesses, and quotes are due by September 18, 2026. The government will award the contract based on best value, utilizing a trade-off process that weighs cost or price approximately equal to non-price factors. Past performance, specifically SPRS assessments and historical delivery schedule compliance, is identified as a significant evaluation factor. Technical requirements include CMMC Level 2 certification and adherence to specific ball and roller bearing acquisition restrictions. Packaging and marking must comply with MIL-STD-2073-IE and MIL-STD-129, with inspection and acceptance occurring at the point of origin. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

43--PURIFIER,CENTRIFUGA, IN REPAIR/MODIFICATION OF

Solicitation # N0010426RTC34

This presolicitation notice, issued by the Navsup Weapon Systems Support Mech, concerns the repair or modification of five centrifugal purifiers under NSN 7H-4330-014169311, TDP VER 003. The delivery terms are set as FOB Origin. The government intends to solicit and negotiate with a single source under FAR 6.302-1, as it has been determined that purchasing data rights or reverse engineering the parts is uneconomical. Interested parties may submit proposals, quotations, or capability statements within 45 days of publication, or within 15 days if offering a commercial item. While the government is not currently utilizing FAR Part 12 for commercial items, responsible sources may still identify their interest and capability to respond. Technical documentation and standards can be obtained through the DoD Single Stock Point or the ASSIST-Online portal.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 7 hours ago

DEADLINE

in about 1 month

41--COMPRESSOR UNIT,REF, IN REPAIR/MODIFICATION OF

Solicitation # N0010426RZB79

This presolicitation notice, issued by the Navsup Weapon Systems Support Mech, is for the repair or modification of four compressor units under NSN 7H-4130-015181389-A3. The delivery terms are set as FOB Origin. Due to the fact that the government does not own the necessary technical data and has determined that purchasing such rights or reverse engineering the parts is uneconomical, the government intends to solicit and negotiate with a single source under the authority of FAR 6.302-1. While this is not a formal request for competitive proposals, the government will consider capability statements, quotations, or proposals from all responsible sources to determine if a competitive procurement is warranted. Interested parties must submit their responses by October 28, 2026. The final decision to proceed with a sole-source or competitive contract remains at the sole discretion of the government.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 7 hours ago

DEADLINE

in about 2 months

Engine Starter Replacement Components/Parts

Motor and Generator Manufacturing

POSTED

DEADLINE

Electric Engine Starter Repair (GTK Weapon System)

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

ACCELEROMETER,MECHA

Solicitation # N0010426QNE28

This solicitation from the Navsup Weapon Systems Support Mech is for the repair of several sonar-related components, including towed arrays, adapter assemblies, and receiving sets. The scope covers the repair of 21 total units across five different National Stock Numbers. The government requires a requested repair turnaround time of 375 days and mandates government-source inspection and acceptance. Contractors must provide unit repair prices, beyond repair prices, and throughput constraints in their quotes. Key compliance requirements include a valid U.S. security clearance per DD Form 254 and strict adherence to mercury-free material standards for use on submarines and surface ships. The government retains an option to order an additional quantity up to 100 percent of the original order for 468 days after the award at the same price. All submissions must be sent via email to the designated point of contact, Rachel Kern.

Other Communications Equipment Manufacturing

POSTED

DEADLINE

DEFLECTOR,DIRT AND

Solicitation # N0010426QBQ38

This solicitation is for the procurement of dirt deflectors under a small-business set-aside, with a response deadline of September 17, 2026. The contract is a fixed-price agreement for supplies delivered FOB-destination, requiring compliance with specific technical documentation, including Individual Repair Part Ordering Data (IRPOD) and various military specifications. Pricing for quotations is generally valid for 60 days following the closing date. Key requirements include strict adherence to the established order of precedence for technical documents and the prohibition of mercury in hardware. Contractors must maintain an acceptable inspection system and follow detailed packaging and cleanliness standards, such as MIL-PRF-23199. Deliverables include a Certificate of Compliance and a cure date certificate submitted at the time of material delivery. The contract also mandates cybersecurity maturity model certification and adherence to specific distribution statements for the safeguarding of technical data.

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

DEADLINE

HALL EFFECT, 200A

Solicitation # N0010426QED44

Solicitation NO0104-26-Q-ED44 is a fixed-price, small business set-aside procurement issued by NAVSUP Weapon Systems Support Mech for the acquisition of 66 units of Hall Effect, 200A (NSN 1HM 6625-01-689-5402 X3). The total quantity was increased from 34 to 66 units via Amendment 0001, with deliveries split between shipping locations W25G1U and W62G2T. The award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with evaluations incorporating the Supplier Performance Risk System to assess item, price, and supplier risk. Technical requirements are governed by the Individual Repair Part Ordering Data (IRPOD) and Technical Data Package Version 002, with a strict prohibition on the intentional use of mercury. The contractor must provide a Certificate of Compliance per DI-MISC-A81356 and report Unique Item Identifiers (IUID) at the time of delivery. Inspection and acceptance will occur at the contractor's or subcontractor's plant. Shipping is FOB destination with costs prepaid. Payment and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system. Pricing for quotations remains valid for 60 days after the closing date.

Bare Printed Circuit Board Manufacturing

POSTED

DEADLINE

28--ARM ASSY ROCKER

Solicitation # N0010426QEG55

This presolicitation notice, identified by solicitation number N0010426QEG55, is for the procurement of 50 units of the 28-ARM ASSY ROCKER under NSN 1H-2815-016959867-PP. The items are to be delivered to DLA Distribution centers in New Cumberland, Pennsylvania, and Tracy, California. The Department of Defense, through Navsup Weapon Systems Support Mech, intends to solicit this requirement from a single source under FAR 6.302-1, as the government does not own the data rights for the part and reverse engineering is deemed uneconomical. While this is not a formal request for competitive proposals, the government will consider proposals or capability statements from responsible sources received within 45 days of publication, or 30 days if awarded under an existing Basic Ordering Agreement. Interested parties have 15 days to notify the contracting officer if a commercial item can satisfy the requirement, as FAR Part 12 policies are not currently being utilized. The response deadline for this action is October 27, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

in about 1 month

48--VALVE,BUTTERFLY, IN REPAIR/MODIFICATION OF

Solicitation # N0010426QLC43

The Department of Defense, through Navsup Weapon Systems Support Mech, is issuing a presolicitation notice for the repair or modification of 75 butterfly valves under NSN 7H-4820-012448339, TDP VER 005. The government intends to negotiate with a single source under FAR 6.302-1 because it does not own the necessary data rights and has determined that reverse engineering or purchasing the data is uneconomical. Delivery is specified as FOB Origin. While this is not a formal request for competitive quotes, interested parties may submit capability statements or quotations to demonstrate their ability to meet the requirement. All submissions must include a CAGE code. The government will consider these responses to determine if a competitive procurement is warranted. Technical documentation can be accessed via the DODSSP or ASSIST-Online. Award is contingent upon the offeror meeting qualification requirements per FAR 52.209-1.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

in about 1 month

30--2-TON CHAIN HOIST

Solicitation # N0010426QBJ41

This solicitation, issued by the Navsup Weapon Systems Support Mech for a 2-ton chain hoist, is a fixed-price contract set aside for small businesses. The procurement is governed by strict technical requirements, including the Individual Repair Part Ordering Data and specific military specifications. Key compliance mandates include a prohibition on the intentional use of mercury, adherence to cybersecurity maturity model certification levels, and strict export controls that prohibit the release of technical documents to foreign nationals without prior approval from the Naval Sea Systems Command. The contract emphasizes a rigorous quality assurance and packaging process, requiring specific cleanliness controls and the use of approved packaging materials. Vendors must review mandatory drawings and data available via the BPMI website and provide a Certificate of Compliance upon material delivery. Pricing for quotations is generally valid for 60 days, and the current closing date for responses is July 23, 2026. All deliverables and technical data must follow the established order of precedence, with contract amendments taking the highest priority.

Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

DEADLINE

COMPRESSOR,GUN RECO

Solicitation # N0010426QUC09

This solicitation from the Navsup Weapon Systems Support Mech is for the procurement or repair of a Gun Recoil Compressor. The contract requires the awardee to be an authorized source, with distributors providing official OEM authorization. It specifies a firm-fixed price and, in the case of repair services, a requested turnaround time of 180 days. Failure to meet this turnaround time may result in a price reduction via a reconciliation modification. Key requirements include adherence to MIL-STD packaging and IUID standards per DFARS 252.211-7003. The contract is issued bilaterally, requiring written acceptance from the contractor. All quotes and certifications must be submitted electronically to the designated point of contact. The scope also includes strict quality assurance protocols, government source inspection, and specific guidelines for reporting design or part number changes.

Other Electronic Component Manufacturing

POSTED

DEADLINE

in about 1 month

Solicitation # N0010426QFE84

This solicitation, issued by Navsup Weapon Systems Support Mech, is for the procurement of high-criticality metal bars, specifically nickel-copper alloy and copper-nickel alloy forgings. Due to their use in crucial shipboard systems, these items are designated as Special Emphasis material, requiring strict adherence to quality assurance standards, including ISO-9001 and specific MIL-STD certifications. The contract emphasizes rigorous material traceability, ultrasonic inspection, and the prohibition of mercury-containing compounds to prevent system failures that could lead to loss of life or vessel loss. Key requirements include the submission of certification data 20 days prior to delivery and a final delivery window of 365 days. The procurement is a combined solicitation for multiple related items, allowing for awards at the CLIN level to multiple vendors. Offerors must provide a certificate of compliance and maintain a documented quality system available for government audit. The response deadline for this solicitation is September 25, 2026.

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS