Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Manufacture of Metal Marine Doors

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the fabrication of 26 metal marine doors, each with a clear opening of 26 inches by 66 inches, specified under NSN 2040-01-253-4544, and must fully comply with military standards for durability and performance in harsh marine environments. The work will be performed at a designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the doors must be manufactured to meet exacting defense-grade requirements for corrosion resistance, structural integrity, and operational reliability under saltwater exposure and extreme conditions. This is a small business set-aside subcontract under the SBA program, classified under NAICS code 332312, ensuring eligibility is restricted to qualifying small businesses. The solicitation was posted on July 29, 2026, with a response deadline of August 10, 2026, and is administered by the Maritime Supply Chain organization within the Department of Defense. While no point of contact or detailed technical specifications are provided in the data, bidders are expected to fully understand and adhere to the referenced NSN and associated military specifications for marine door systems, and submissions must align with the set-aside criteria to be considered for award.

General Info

Fabricate 26 military-grade marine doors to NSN 2040-01-253-4544, small business set-aside, due August 10, 2026, in New Cumberland, PA.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

332312 - Fabricated Structural Metal ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 29

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabrication of 26 metal marine doors with 26" x 66" clear opening per NSN 2040-01-253-4544, compliant with military specifications for marine environments.

Similar Contracts

Same NAICS industry code

Structural Steel Fabrication and ErectionThe contract pertains to the fabrication and on-site erection of structural steel components for construction projects under the San Diego Unified School District. Work will be performed in San Diego, California, with a specific performance zip code of 92124, and encompasses the full scope of manufacturing steel elements as well as their assembly at designated project sites. The NAICS code 332312 identifies this as a specialty trade contractor activity focused on structural steel fabrication and erection, indicating the specialized nature of the required work. This is a subcontract opportunity with a response deadline of August 20, 2026, at 9:00 PM Pacific Time, and it was posted on July 29, 2026. All submissions must be completed through the provided BidAmerica portal before the deadline to be considered.

San Diego Unified School District

POSTED

DEADLINE

Precision Fastener Supply – Machine ScrewsThe contract calls for the supply of 3,000 precision machine screws that must fully comply with military specifications, ensuring rigorous quality, dimensional accuracy, and material integrity required for defense applications. All items must be delivered with compliant packaging, proper marking, and complete documentation to meet the Defense Logistics Agency’s acceptance criteria, which includes traceability, labeling, and certification standards essential for military procurement. The requirement is issued as a subcontract under the NAICS code 332312, indicating it involves the manufacturing of industrial fasteners and related hardware. The solicitation was posted on July 29, 2026, with a firm response deadline of August 6, 2026, and is managed by the Aviation Supply Chain ESOC Buys team under the Department of Defense. There is no set-aside designation, meaning all eligible contractors may bid. The place of performance and point of contact details are not specified, but the contract will be processed through the DIBBS system, and successful vendors must be prepared to fulfill all technical, administrative, and logistical demands to ensure seamless integration into the defense supply chain.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Structural Fittings Manufacturing and SupplyThe contract requires the manufacture and supply of fifteen units of Structural Fitting with National Stock Number 1560-01-649-2616, all of which must fully comply with the Department of Defense’s technical specifications, quality requirements, packaging standards, and strict traceability protocols set by the Defense Logistics Agency. The work is scoped as a subcontract under NAICS code 332312 and is being managed by the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense. All deliverables must meet rigorous defense-grade compliance criteria to ensure suitability for military use, with emphasis on documentation, material sourcing, and quality control throughout the production lifecycle. Bids are solicited with a response deadline of August 11, 2026, and the opportunity was posted on July 29, 2026. There is no set-aside designation specified, and the place of performance has not been defined, indicating flexibility in manufacturing location provided all contractual obligations are met. The procurement is being handled through the DIBBS system, and interested parties must access the full solicitation via the provided UI link to obtain detailed technical documentation and submission guidelines. Compliance with DLA standards is non-negotiable, and failure to meet traceability or quality benchmarks will result in disqualification or contract termination.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Structural Steel Fabrication and SupplyThe contract involves the supply and delivery of structural steel plates that must meet rigorous military specifications, ensuring durability, dimensional accuracy, and performance under demanding operational conditions. All materials must be packaged and labeled in strict accordance with MIL-STD-129 standards, which govern uniformity in military logistics, including labeling formats, marking content, and packaging integrity to facilitate handling, storage, and identification throughout the supply chain. The fabricated components are intended for use at Robins Air Force Base, Georgia, and must be delivered to meet the exacting requirements of the Department of Defense's supply chain operations. This is a subcontract opportunity issued under the NAICS code 332312 for Structural Metal Fabrication, with a response deadline of August 6, 2026, and a posted date of July 29, 2026. The contracting office is the ASC SUPPLIER OPER AE AND AF DIV, indicating the procurement is managed by a defense logistics unit focused on aerospace and defense support. While no set-aside status or point of contact is specified, bidders must comply with all technical, logistical, and compliance obligations tied to military-grade steel fabrication. The solicitation is accessible via the DIBBS portal, and all proposals must demonstrate full adherence to military standards for both product quality and packaging.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Structural Steel Plate FabricationThe contract involves the manufacture and delivery of a precision-machined aluminum structural plate designed to meet aerospace-grade specifications under DLA technical standards. Despite the title referencing steel, the technical requirements specify aluminum as the material, and the work must adhere to stringent quality and dimensional controls typical of defense and aerospace applications. The item is to be delivered to the place of performance at JB MDL with zip code 08641-5500, indicating the delivery destination is a major U.S. military installation. The solicitation was posted on July 29, 2026, with a response deadline of August 6, 2026, indicating a short, competitive procurement window typical for specialized subcontracting opportunities. This is classified as a subcontract under NAICS code 332312, which corresponds to forging and stamping, suggesting the work may involve forming and machining processes rather than pure casting or fabrication. The contracting organization is the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, highlighting the defense supply chain context. No set-aside information is provided, meaning the opportunity is open to all qualified suppliers regardless of business size or ownership characteristics. The absence of a point of contact and specific agency address implies that all communications must be conducted through the designated DIBBS portal, where the full solicitation document can be accessed via the provided link.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

BEAM, STRUCTURAL

Solicitation # SPE8E4-26-Q-0332

The contract specifies the procurement of structural aluminum alloy beams made from 2024/T-3511 material with dimensions of 0.750 inches in height, 1.25 inches in width, and 0.063 inches in thickness, supplied in even whole feet lengths between 10 and 12 feet, at a weight of approximately 0.150 pounds per foot. A total of 589 linear feet is required under solicitation SPE8E4-26-Q-0332, with firm fixed pricing and zero variance allowed in quantity. Delivery must be completed within 30 days after award, with inspection and acceptance occurring at the destination. All material must conform to SAE AMS-QQ-A-200C and SAE AMS-QQ-A-200/3A specifications, and must be accompanied by a Certificate of Quality Compliance (Mill-Material Certification) with each shipment, a copy of which must be forwarded to the DLA Troop Support Contracting Officer. Continuous identification markings are mandatory on every unit, including the DLA contract number, NSN, specification revision, alloy, temper, manufacturer’s name, heat and lot numbers, and dimensions, applied via stamping or stenciling in legible, waterproof, and non-contaminating ink. Adhesive labels are required for bars, tubes, and shapes under 0.250 inches in nominal outer diameter. Packaging must comply with MIL-STD-2073-1E and ASTM B660 standards, and markings must adhere to MIL-STD-129, including dual-unit labeling when applicable. The supplier must be on the Qualified Suppliers List for Distributors (QSLD), and failure to comply results in rejection or potential criminal penalties. The material is designated a Critical Application Item, requiring strict adherence to quality and traceability controls. Delivery is to the DLA Distribution San Joaquin warehouse in Tracy, California, with FOB origin terms and no government inspection waivers apply beyond those stipulated for QSL-compliant suppliers.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

SHROUD ASSEMBLY, GENERA

Solicitation # SPE4A6-26-Q-1238

The contract pertains to the supply of 37 units of a shroud assembly for general use, identified by NSN 1560-00-829-9365, under solicitation SPE4A6-26-Q-1238. Engineering requirements are detailed in Drawing 008299365, with specific welding standards mandating weld class 'B' as defined in BAC 5975 and permitting a 3/16-inch weld size. The procurement is governed by technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and inspection and acceptance are to occur at the origin. Government identification must be removed from non-accepted items, and while item unique identification is not required per the service customer’s request, DFARS 252.211-7003(c)(1)(i) remains in effect. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior authorization from the U.S. Department of State or Commerce. Access to controlled data is limited to contractors holding a valid US/Canada Joint Certification Program certification, who have completed mandated DOD export control training and DLA questionnaires, and have been formally approved by DLA. The delivery schedule requires fulfillment within 200 days after award, with the solicitation open for response until August 11, 2026, and the contract managed by the Department of Defense’s ASC Commodities Division through Point of Contact Tierra Smith.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

MOUNT, RESILIENT, WEAPON

Solicitation # SPE4A7-26-T-599Z

This contract is for the procurement of 97 units of a resilient weapon system mount, identified by NSN 5342-01-159-6456 and part number 12293273-6, under solicitation SPE4A7-26-T-599Z. The item is classified as a critical application and Type I shelf-life item with a non-extendable shelf life of 60 months, requiring at least 85% of its shelf life to remain upon receipt by the first government activity. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including proper labeling per MIL-STD-129 with special marking code 32 for Type I shelf life. The product must be palletized and shipped FOB origin, with inspection and acceptance occurring at the point of manufacture. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes must be verified at level VII with an AQL of 0.1. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions effective as of the solicitation or award date depending on acquisition type. Delivery is due within 171 days of award, with an original required delivery date of April 21, 2027, and the item must be shipped to DDSP New Cumberland Facility in Pennsylvania. The unit price is $97.00 per each, totaling $9,409.00, and procurement is governed under NAICS code 332312 by the Department of Defense’s ASC Supplier Oper AE and AF Division.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

PANEL, STRUCTURAL, AI

Solicitation # SPE4A7-26-Q-0920

The contract is for one structural panel, item number 1560-01-196-4405, under solicitation SPE4A7-26-Q-0920, with a delivery deadline of 440 days after order. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions applicable based on the acquisition type and timeline—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions use the revision active on the RFP issue date unless a later amendment supersedes it. The item is subject to multiple DLA-specific requirements including packaging, inspection and acceptance at origin, physical identification and marking of the bare item, measurement and test equipment standards, and configuration change management through engineering change proposals. Importantly, the item is exempt from item unique identification per service customer request, and government identification must be removed from non-accepted supplies. The technical data associated with this item is subject to export controls under ITAR or EAR, requiring explicit authorization for any disclosure to foreign persons, regardless of location, and only contractors with approved JCP certification, completed training, and DLA clearance may access such data. All applicable DFARS clauses, including those governing export control and contractor responsibilities, are in effect. The solicitation was posted on July 29, 2026, with a response deadline of August 5, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with NyA Currie as the primary point of contact.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

FITTING, STRUCTURAL

Solicitation # SPE4A7-26-Q-0928

The contract specifies the procurement of 15 structural fittings with NSN 1560-01-649-2616 under solicitation SPE4A7-26-Q-0928, with a delivery requirement of 250 days after contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The supplier must comply with DLA packaging standards, inspection and acceptance at origin, and strict retention of supply chain traceability documentation as defined in DLA Procurement Note C03 from August 2016. Item Unique Identification is not required per the Service customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified; critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Export control of technical data is strictly enforced under ITAR or EAR, prohibiting any disclosure to foreign persons without prior authorization, and requires contractors to hold valid US/Canada Joint Certification Program certification, complete mandatory training and DLA questionnaires, and obtain formal approval from DLA to access controlled data. The contract is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with point of contact Rekisha Burton, and the solicitation response deadline is August 11, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

EXPANSION JOINT, PIPE

Solicitation # SPE7M3-26-T-7742

The contract is for the procurement of twelve expansion joints for pipe systems, identified by NSN 4730-01-454-0089, under solicitation SPE7M3-26-T-7742, with a total set-aside for small businesses as defined by the SBA. The technical and quality requirements for this item are governed by the DLA Master List of Technical and Quality Requirements, with compliance dependent on the revision in effect at the solicitation issue date or award date, depending on the acquisition size. The item is subject to export control under either ITAR or EAR, strictly limiting the handling and dissemination of associated technical data to authorized U.S. contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been expressly approved by DLA to access controlled data. Any disclosure, including to foreign nationals within the United States, constitutes an export requiring prior government authorization. Delivery is required within 142 days after contract award, with performance located in San Diego, California. The solicitation was posted on July 29, 2026, with responses due by August 10, 2026, and the contracting office is the Fluid Handling Division of the Department of Defense, with William Cain designated as the primary point of contact.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Liquidtight Flexible Conduit SupplyThe contract entails the supply of 5,900 feet of liquidtight flexible conduit that must fully comply with applicable electrical codes and technical specifications, with delivery terms set at FOB destination, meaning the seller assumes responsibility for transportation costs and risks until the goods reach the specified delivery point. The requirement is part of a Small Business Set Aside under the SBA, restricted exclusively to qualified small businesses, and is classified under NAICS code 332312 which pertains to the manufacturing of electrical and wiring fixtures. The solicitation was posted on July 29, 2026, with responses due by August 5, 2026, at 3:00 PM, indicating a tight turnaround for submissions. The contracting activity is administered by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, though the specific place of performance and point of contact details are not provided in the data. The contract is structured as a subcontract, and interested parties must access the official SAM.gov portal via the provided link to submit proposals or obtain further procedural guidance.

NASA Shared Services Center

POSTED

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

Invalid Knowledge Base ReferenceThe contract is a subcontract flagged for a Service-Disabled Veteran-Owned Small Business Set-Aside, indicating eligibility and preference for businesses owned by service-disabled veterans. It was posted on July 29, 2026, with a response deadline of August 10, 2026, and is managed by the Maritime Supply Chain under the Department of Defense. The place of performance is specified as Corpus Christi, Texas, with a zip code of 78419-5255, though no exact address or point of contact information is provided. The North American Industry Classification System code is listed as NA, and the agency organization details are incomplete, preventing full contract decomposition or analysis. The solicitation number is absent, and the contract can be accessed via a DIBBS link, but no prime contract data or vendor details are available for review.

POSTED

DEADLINE

Piston Ring Supply and ComplianceThe contract entails the supply of a single military-specification piston ring identified by NSN 4310017064138 and part number 18-20419-12R1, manufactured and delivered in full compliance with U.S. Department of Defense standards. Delivery requirements include strict adherence to MIL-STD-129 for item labeling and MIL-STD-2073-1E for packaging, ensuring the component is properly marked, protected, and documented for military logistics. The piston ring must also meet hazardous material handling protocols and be processed through the Defense Logistics Agency fulfillment system to guarantee seamless integration into the military supply chain. The solicitation is classified as a subcontract under NAICS code 333912, issued by the Maritime Supply Chain division of the Department of Defense, with performance required at FPO and a zip code of 09591. Bidders must submit their proposals by the deadline of August 10, 2026, with the opportunity originally posted on July 29, 2026. All suppliers are expected to fulfill documentation, packaging, and compliance specifications without exception, as nonconformity will result in rejection regardless of product quality. Access to the official solicitation details is available through the DIBBS platform using the provided link.

Air and Gas Compressor Manufacturing

POSTED

DEADLINE

Cybersecurity Compliance for Covered Defense InformationThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to safeguard covered defense information, ensuring compliance with federal cybersecurity standards for contractors handling sensitive government data. All systems and processes must be configured to meet the full suite of controls outlined in the NIST publication, covering areas such as access control, audit, configuration management, and incident response. In addition to maintaining these protections, the contractor is obligated to report any cyber incidents involving covered defense information within 72 hours of discovery, with full cooperation in investigations and remediation efforts. This is a subcontract under the Department of Defense’s Maritime Supply Chain initiative, with performance expected to take place at an FPO address identified by the zip code 96675. The North American Industry Classification System code 541512 indicates the work falls under computer systems design and related services. The solicitation was posted on July 29, 2026, and responses must be submitted by August 10, 2026. While no specific set-aside designation is provided, the contract is managed through the DLA DIBBS platform, and strict adherence to the timeline and cybersecurity requirements is mandatory for award consideration.

Computer Systems Design Services

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling SupportThe contract seeks specialized support for hazard communication related to electrical components containing hazardous materials, requiring the preparation of compliant hazard warning labels and Material Safety Data Sheets (MSDS) in accordance with regulatory standards. The work is intended to ensure that all hazardous substances within these components are properly identified, documented, and communicated to downstream users and handlers, mitigating safety risks and maintaining regulatory compliance across the supply chain. The contractor must possess the technical expertise to interpret chemical hazards and translate them into accurate, standardized safety documentation. This subcontract is issued under NAICS code 541690 and is managed by the Department of Defense through the Maritime Supply Chain organization. The place of performance is designated as FPO with a ZIP code of 96675, indicating operations may involve military or overseas logistics environments. Proposals must be submitted by August 10, 2026, following the solicitation posted on July 29, 2026. While no set-aside type is specified, the solicitation is accessible via the DIBBS platform, emphasizing the need for timely and precise adherence to federal procurement protocols for defense-related hazardous materials compliance.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Supply of Magnetic Contactors / Motor StartersThe contract requires the manufacture, testing, packaging, and delivery of magnetic contactors designated by NSN 6110014119297, commonly referred to as motor starters, strictly in accordance with military specifications to ensure reliability and performance under demanding operational conditions. The work must meet all applicable defense standards for quality, durability, and safety, with full compliance expected throughout the production and quality assurance processes. These components are critical for military equipment functionality and must be produced with precision to ensure seamless integration into existing systems. The solicitation is issued as a subcontract under the Department of Defense through the Maritime Supply Chain, with a response deadline of August 10, 2026, and the place of performance designated as FPO with ZIP code 96675. The NAICS code 335313 identifies the industry as Electric Lighting Equipment, Electrical Equipment, and Appliance, and Motor and Generator Manufacturing, aligning with the technical scope of the required components. All deliverables must be fully packaged and labeled per military logistics requirements for secure and efficient distribution to designated operational units.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Centrifugal Pump Impeller SupplyA single centrifugal pump impeller with a diameter of 8.1875 inches is being procured under a small business set-aside subcontract, exclusively available to small businesses as defined by the SBA under FAR 19.5. The item must comply strictly with military standards for packaging, marking, and hazardous materials handling to ensure safe and standardized handling throughout the defense supply chain. The solicitation is managed by the Maritime Supply Chain under the Department of Defense, with performance required at the specified location in New Cumberland, Pennsylvania, 17070-5002. The North American Industry Classification System code assigned is 333996, indicating the procurement falls under other miscellaneous manufacturing. The opportunity was posted on July 29, 2026, and responses are due by August 10, 2026, with all submissions expected to meet the technical, regulatory, and procedural requirements outlined for defense contracts.

Fluid Power Pump and Motor Manufacturing

POSTED

DEADLINE

Technical Data and Export Control ManagementThe contract pertains to the management of technical data subject to International Traffic in Arms Regulations and Export Administration Regulations, requiring strict control over access, handling, and dissemination to ensure compliance with U.S. export control requirements. It mandates the implementation of processes for authorizing foreign national access to controlled technical data, including screening, documentation, and ongoing monitoring to prevent unauthorized disclosure. All activities must adhere to federal export control standards and maintain the integrity of sensitive information throughout its lifecycle. This is a total small business set-aside subcontract under NAICS code 541618, issued by the Department of Defense through the Maritime Supply Chain organization. The opportunity was posted on July 29, 2026, with responses due by August 10, 2026. Performance is expected to take place in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The contracting mechanism is designed to prioritize small business participation, and the work involves specialized expertise in export compliance, technical data security, and regulatory adherence within the defense supply chain ecosystem.

Other Management Consulting Services

POSTED

DEADLINE

CMMC Level 2 Compliance and Cybersecurity SupportThe contract seeks third-party support for achieving and maintaining CMMC Level 2 compliance to safeguard controlled unclassified information within the maritime supply chain. The effort focuses on assessing cybersecurity posture and providing implementation guidance to meet the required safeguards outlined in the CMMC framework, specifically tailored for handling CUI across subcontracted operations. This is a small business set-aside under the SBA program, exclusively available to total small businesses, with the North American Industry Classification System code 541512 designating it as computer systems design and related services. Performance is centered in New Cumberland, Pennsylvania, with the Department of Defense, under the Maritime Supply Chain office, serving as the contracting authority. The solicitation was posted on July 29, 2026, and responses are due by August 10, 2026. The subcontract will engage qualified providers to conduct comprehensive assessments, remediate gaps, and ensure ongoing compliance with CMMC Level 2 requirements throughout the supply chain, reinforcing the defense industrial base’s cyber resiliency. All work must align with federal standards for protecting sensitive information and supporting the broader objectives of the DoD’s cybersecurity maturity initiatives.

Computer Systems Design Services

POSTED

DEADLINE

Domestic Transportation and FOB Origin LogisticsThe contract requires the domestic transportation of 26 marine doors from the manufacturer to the Defense Logistics Agency facility in New Cumberland, Pennsylvania, under FOB Origin terms, meaning the buyer assumes all responsibility and costs once the goods leave the seller’s location. The contractor must ensure full tracking of the shipment and provide complete delivery documentation upon arrival. This is a subcontract awarded under a Total Small Business Set-Aside, exclusively for small businesses as defined by the SBA, with the NAICS code 484220 indicating surface transportation of freight. The opportunity was posted on July 29, 2026, with responses due by August 10, 2026, and is managed by the Maritime Supply Chain organization under the Department of Defense. Delivery must be completed at the designated zip code 17070-5002, and the contractor is expected to meet all logistical requirements without additional support from the government beyond the specified terms.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Military Packaging, Labeling, and Hazardous Materials ComplianceThe contract requires comprehensive packaging and labeling of marine doors in strict adherence to MIL-STD-129 and MIL-STD-2073-1E standards, ensuring military-grade documentation, barcoding, and container marking for defense logistics. Additionally, compliance with OSHA hazard communication regulations is mandatory, including the accurate generation and inclusion of Safety Data Sheets (SDS) for any hazardous materials involved in the manufacturing or packaging process. All work must be executed under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA, with the NAICS code 561910 indicating the scope involves support activities for material handling and packaging services. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and responses are required by August 10, 2026, following a posting date of July 29, 2026. This is a subcontract opportunity issued under the Department of Defense through the Maritime Supply Chain organization, with all technical and regulatory requirements centered on defense logistics compliance and hazardous materials safety.

Packaging and Labeling Services

POSTED

DEADLINE

Small Business Subcontracting Participation (Administrative Support)The contract seeks administrative and compliance support services to facilitate small business participation and ensure adherence to Department of Defense subcontracting reporting requirements. The primary objective is to assist in meeting federal small business goals through proper documentation, tracking, and submission of subcontracting data in alignment with regulatory standards. The work is tied to NAICS code 541611, indicating a focus on management consulting services, and will be performed in Tracy, California, with a zip code of 95304-5000. The solicitation was posted on July 29, 2026, and responses are due by August 10, 2026. Although no specific set-aside designation is listed, the effort is embedded within the broader DOD framework to promote small business engagement across the maritime supply chain. Submission must be made through the DIBBS platform using the provided link, and all activities must support accurate and timely compliance with federal subcontracting obligations.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Electronic Component Packaging and Marking ServicesThe contract seeks specialized packaging and marking services for electronic components to ensure strict traceability between leaded and lead-free variants, aligning with military logistics standards for compliance and reliability. All work must adhere to rigorous requirements designed to prevent cross-contamination and maintain identity throughout the supply chain, supporting Department of Defense operations with fully auditable component provenance. The services are vital for sustaining mission-critical systems where material integrity and regulatory conformity are non-negotiable. Performance is required at Tracy, California, with a zip code of 95304-5000, and the opportunity is classified as a subcontract under NAICS code 385210. Proposals must be submitted by August 10, 2026, with the solicitation publicly posted on July 29, 2026, through the DIBBS platform. The contracting entity is the Maritime Supply Chain under the Department of Defense, emphasizing the operational importance of this effort within military aerospace and defense infrastructure.

POSTED

DEADLINE