Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Manufacture of Metallic Aircraft Seals (NSN 2840-01-316-9945 NZ)

Active

Federal

Response Deadline11/06/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture of 22 new metallic aircraft seals, specifically Part Number 4054085-01, for prime contractors supporting DLA Aviation supply contracts for the F100 engine system. The scope of work includes precision machining, the execution of First Article Testing, and the generation of required First Article Qualification Test Plans and Test/Inspection Reports. To ensure quality and security, the contractor must maintain ISO 9001:2015 certification, adhere to NIST SP 800-171 standards, and provide CSI traceability. The project is categorized under NAICS code 336412 and is managed through the Department of Defense for DLA Aviation at Oklahoma City.

General Info

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma City

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

0, OK, USA

Set-Aside

NONE

Documents

This scope was carved out of SPRTA127Q0005.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SEAL,METALLIC,AIRCR

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 7

subcontract

Response DeadlineNov 6

Submission deadline

Response Deadline

11/06/2026, 07:00:00 PM UTCin 30 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures new metallic aircraft seals for prime contractors delivering DLA Aviation supply contracts for the F100 engine system. Performs precision machining of Part Number 4054085-01, conducts First Article Testing (FAT), and generates First Article Qualification Test Plans (DI-NDTI-81307A) and Test/Inspection Reports (DI-NDT1-80809B/T). Requires ISO 9001:2015, NIST SP 800-171, and CSI traceability. Delivers 22 finished seals.

Similar Contracts

Same NAICS industry code

FIELD ASSEMBLY, FUEL

Solicitation # SPE4A5-27-T-0137

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 9 hours ago

DEADLINE

SUPPORT, COMPRESSOR

Solicitation # SPE4A6-27-T-0663

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

VANE, COMPRESSOR, AIRCRA

Solicitation # SPE4A5-27-T-0139

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 9 hours ago

DEADLINE

Piston Tube Assembly Overhaul and ReassemblyThis subcontract involves the overhaul and reassembly of Piston Tube Assemblies for prime contractors supporting Navsup Weapon Systems Support Philadelphia projects. The scope of work includes the complete teardown, cleaning, and inspection of units to identify wear, followed by component-level repairs and reassembly to original specifications. All finished assemblies must be delivered in Ready for Issue condition and accompanied by a detailed history card. To ensure technical compliance, the contractor must maintain ISO 9001 or SAE AS9100 quality systems and adhere to ANSI/NCSL Z540.3 or ISO-10012-1 calibration standards. This Department of Defense project falls under NAICS code 336412, with a response deadline set for November 6, 2026.

Navsup Weapon Systems Support

POSTED

about 14 hours ago

DEADLINE

Precision Machining and Fabrication of F100 Injector AssembliesThis subcontract involves the precision machining and fabrication of 50 Injector Assemblies, part number 4081806, for F100 series turbine engines under DLA Aviation projects. The manufacturer is required to use high-strength nickel cobalt alloy and strictly follow drawing FD20302402106. Key deliverables include the finished assemblies and comprehensive First Article Testing reports. To ensure quality and security, the contractor must adhere to LPF-QAR-003 inspection requirements and utilize OEM or CEA certified processes. Additionally, the provider must maintain NIST SP 800-171 compliance. The project is managed under NAICS code 336412 for the Department of Defense.

Ok DLA Aviation At Oklahoma City

POSTED

about 14 hours ago

DEADLINE

Injector Assembly

Solicitation # SPRTA127R0040

Solicitation SPRTA127R0040, issued by the Department of Defense via DLA Aviation at Oklahoma City, seeks the manufacture of 50 Injector Assemblies (P/N 4081806, NSN 2915-01-550-3637NZ) for F100 series turbine engines. These components are designated as Critical Safety Items, requiring strict adherence to drawing specifications and approval of manufacturing processes by Pratt & Whitney or AFLCMC/LPSAA. The contract includes a First Article Testing (FAT) requirement for new manufacturers or those who have not produced the item within three years, consisting of three parts: two for production and one for destructive testing. Deliverables, including FAT test plans and reports, are due between 45 and 60 calendar days from the date of the contract. Award will be determined using the Best Value Process, Performance Price Tradeoff method, where technical acceptability is a prerequisite. For acceptable proposals, cost and past performance, the latter primarily assessed via the Supplier Performance Risk System, will be weighted approximately equally. The contractor must comply with rigorous quality standards, including ISO 9001 and LPF-QAR-003, and adhere to military packaging and marking standards MIL-STD-2073-1 and MIL-STD-129. Additionally, the solicitation mandates compliance with the Buy American Act, NIST SP 800-171 cybersecurity standards, and requires the use of Wide Area Workflow for invoicing and inspection reports.

Ok DLA Aviation At Oklahoma City

POSTED

about 14 hours ago

DEADLINE

Fuel Control, Main, T

Solicitation # SPRTA127R0002

Ok DLA Aviation At Oklahoma City

POSTED

about 14 hours ago

DEADLINE

SHIELD,HEAT,AIRCRAF

Solicitation # SPRTA127Q0004

Ok DLA Aviation At Oklahoma City

POSTED

about 14 hours ago

DEADLINE

SEAL,METALLIC,AIRCR

Solicitation # SPRTA127Q0005

Solicitation SPRTA127Q0005, issued by the Department of Defense via DLA Aviation at Oklahoma City, seeks quotes for metallic aircraft seals, identified by NSN 2840013169945NZ and Part Number 4054085-01. The requirement is for 22 units with a required delivery date of June 21, 2027, to the DLA Distribution Depot at Tinker AFB, Oklahoma. This is not a small business set-aside and falls under NAICS code 336412. The procurement is a rated order for national defense and requires new manufactured materials, specifically prohibiting surplus items. The items are designated as Critical Safety Items, necessitating strict adherence to ISO 9001-2015 quality standards and First Article Testing (FAT) for three parts. Packaging and marking must comply with MIL-STD-2073-1 and MIL-STD-129, including specific OEM details on AFMC Form 158. Award decisions will be based on a best-value trade-off between price and past performance for offerors deemed technically acceptable. Contractors must utilize Wide Area Workflow (WAWF) for invoicing and inspection reports, and comply with various cybersecurity and defense regulations, including NIST SP 800-171 and DFARS 252.204-7012.

Ok DLA Aviation At Oklahoma City

POSTED

about 14 hours ago

DEADLINE

Manufacture of Aircraft Rear Mount Subassembly (Dynafocal)This subcontract involves the manufacture and supply of two Aircraft Rear Mount Subassemblies (Dynafocal), identified by NSN 2840-00-6717128, for prime contractors supporting DLA Weapons Support ASC projects. The work requires the fabrication of high-precision Navy Identified Critical Safety Items to strict aerospace tolerances, with performance taking place at Hill AFB. To ensure quality and security, the contractor must maintain AS9100 certification and provide a CMMC Level 2 self-assessment. Production must adhere to SAE AS9100 quality standards and utilize either MIL-STD-1916 or ASQ H1331 zero-based sampling. The opportunity was posted on October 6, 2026, with a response deadline of October 14, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Turbine Engine Sleeve FabricationThis subcontract involves the fabrication of 10 turbine engine sleeves, identified by NSN 284003453146, for prime contractors supporting Department of Defense supply contracts. The work requires precision CNC machining and fabrication of aerospace-grade alloys in strict accordance with the DLA Master List of Technical and Quality Requirements. The selected provider must adhere to aerospace quality management standards and produce initial units for First Article Testing to ensure compliance. Managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div, this opportunity is designated as a Total Small Business Set-Aside under NAICS code 336412. The place of performance is located at Tinker AFB. Interested parties must respond by October 14, 2026, to be considered for this specialized aerospace manufacturing requirement.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Fuel System Valves (NSN 2910-01-454-3039)This subcontract involves the manufacture or sourcing of specialized fuel system valves, specifically NSN 2910-01-454-3039, to support prime contractors under the DLA Weapons Support program. The scope of work includes the delivery of up to four units on a FOB Origin basis, with strict adherence to MIL-STD-129 for packaging and marking, as well as 29 CFR 1910.1200 for the labeling of hazardous materials. Managed by the Department of Defense under the DLA Weapons Support Strategic Acquisition Program Directorate, the contract falls under NAICS code 336412. A critical compliance requirement for the provider is the completion of a CMMC Level 2 self-assessment. The response deadline for this opportunity is October 21, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

NDI and First Article Qualification TestingThis subcontract involves providing non-destructive inspection and qualification testing for F100 injector assemblies on DLA Aviation projects. The selected contractor will perform inspections according to LPF-QAR-003 and specific technical drawings, utilizing X-ray, Magnetic Particle, or Dye Penetrant equipment. The scope of work includes conducting destructive testing on First Article parts and delivering certified Test and Inspection Reports in compliance with DI-NDT1-80809B/T. To be eligible, the contractor must hold OEM or CEA facility certification. This opportunity is managed by the Department of Defense through DLA Aviation at Oklahoma City under NAICS code 541380. The response deadline for this requirement is November 6, 2026.

Testing Laboratories and Services

POSTED

about 14 hours ago

DEADLINE

Supply of High-Strength Nickel Cobalt AlloyThis subcontract involves the supply of raw high-strength nickel cobalt alloy intended for prime contractors working on DLA Aviation projects. The material is specifically required for F100 turbine engine injector assemblies and must strictly adhere to the aerospace-grade specifications outlined in drawing FD20302402106. The selected provider is responsible for delivering certified raw alloy stock accompanied by comprehensive material certifications and full traceability documentation. Additionally, all supplies must comply with the Buy American Act. This opportunity is managed under the Department of Defense for DLA Aviation at Oklahoma City, with a response deadline of November 6, 2026.

Iron and Steel Forging

POSTED

about 14 hours ago

DEADLINE

Solicitation # SPRTA1-27-R-0038

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

Solicitation # SPRTA1-27-R-0035

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

VALVE, BUTTERFLY

Solicitation # SPRTA1-27-R-0034

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

Aerospace Component Surface TreatmentThis subcontract, titled Aerospace Component Surface Treatment, involves providing specialized coatings and surface treatments for US Air Force burner operation components. The scope of work requires the application of thermal barrier coatings or anti-corrosion treatments to nickel cobalt alloys utilizing chemical vapor deposition or vacuum plasma spray techniques to deliver finished surface-treated injector assemblies. Managed by the Department of Defense through the DLA Aviation office in Oklahoma City, the contract mandates that providers hold both ISO 9001-2015 and Nadcap certifications. The solicitation was posted on October 6, 2026, with a response deadline set for November 5, 2026, falling under NAICS code 332813.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

First Article Testing (FAT) and Quality ValidationThis subcontract opportunity with the Department of Defense, managed by DLA Aviation at Oklahoma City, involves the testing and quality validation of first production units for US Air Force aerospace projects. The selected contractor will be responsible for developing and executing a First Article Test Plan and generating a corresponding First Article Test Report in accordance with DD Form 1423. Technical execution requires the use of metrology equipment, non-destructive testing tools, and burner simulation environments. To be eligible, contractors must maintain ISO 9001-2015 certification. The primary deliverables for this engagement are the completed FAT Plan and the final Report. Interested parties must submit their responses by November 5, 2026, under NAICS code 541380.

Testing Laboratories and Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS