Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Manufacture of MIL-SPEC Fixed Capacitors

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture of a fixed electrical capacitor with NSN 5910014518713 and part number CWR06KB155KC, produced to meet the stringent technical specifications of MIL-PRF-55365K and MIL-PRF-55365/4L for use in defense systems. This is a subcontract for defense-related production, emphasizing strict adherence to military performance and quality standards to ensure reliability in classified or mission-critical applications. The capacitors must be fabricated to exacting tolerances and undergo rigorous testing to conform to the referenced military specifications, with the end product intended for deployment in military hardware under the oversight of the Department of Defense. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and is classified under NAICS code 334416 for semiconductor and other electronic component manufacturing. The place of performance is specified as Fort Riley, Kansas, with a zip code of 66442-0000, indicating that production, testing, or delivery activities must occur at or near this location. The contract is managed by the Active Devices Division under the Department of Defense, and bidders must be prepared to fulfill all technical, compliance, and delivery requirements outlined in the military specifications without deviation. All work must be executed under the terms of a subcontracting arrangement, and the vendor must demonstrate capability to meet defense-grade timelines and quality controls.

General Info

Manufacture defense-grade capacitors to MIL-PRF-55365K/L specs for Fort Riley, Kansas delivery by August 20, 2026.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor ManufacturingView NAICS

Place of Performance

FT RILEY, KS, 66442-0000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Manufacture of a fixed electrical capacitor (NSN: 5910014518713, Part No: CWR06KB155KC) in compliance with MIL-PRF-55365K and MIL-PRF-55365/4L for defense applications.

Similar Contracts

Same NAICS industry code

NAICS: 334416
New
DIBBS
RESISTOR, THERMAL
Solicitation # SPE7M5-26-T-398D
The contract is for the procurement of two thermal resistors with NSN 5905-01-167-8648, designated as a critical application item, sourced exclusively from approved manufacturers LAVI SYSTEMS, INC. and EDEL ENGINEERING DEVELOPMENT CO. with specific part numbers S246-B52 and 10-30758-7 respectively. The contract imposes stringent quality and compliance requirements including adherence to MIL-STD-1916 or equivalent zero-based sampling plans with strict acceptance criteria—zero non-conformances required unless otherwise stated—and mandates assignment of verification levels VII, IV, and II for critical, major, and minor attributes. Configuration control requires formal engineering change proposals for any deviations, and all unapproved sources must receive ESA approval prior to submission. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with special attention to lead finish identification per IPC/JEDEC J-STD-609, requiring each unit package to be labeled according to specified paragraphs for Pb and Pb-free status. The items must be delivered FOB origin within 165 days to Tinker AFB, Oklahoma, with no variance allowed in quantity—exactly two units must be supplied. Inspection and acceptance occur at destination, and transportation logistics follow DLA procedural notes C19 and C20. All documentation must meet Source Approval Request standards, and removal of government identifiers from non-accepted supplies is prohibited. The contract is issued under SPE7M5-26-T-398D with a unit price of $2.00 per unit and a total value of $4.00, with a bid deadline of August 20, 2026.
ACTIVE DEVICES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, ELE
Solicitation # SPE7M5-26-T-399M
The contract pertains to the procurement of a single fixed electrical capacitor, identified by NSN 5910-01-451-8713 and part number CWR06KB155KC, compliant with MIL-PRF-55365K and MIL-PRF-55365/4L specifications. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance tied to the revision in effect on the solicitation or award date. The item must conform to qualification standards listed on Qualified Products Lists or Qualified Manufacturers Lists, and physical identification and marking must adhere to RQ017 and MIL-STD-129. Lead finish markings must follow IPC/JEDEC J-STD-609, applied to each unit pack with placement consistent with the standard’s technical guidelines. Packaging and preservation must comply with MIL-DTL-39028 for capacitors, and all packaging, labeling, and shipping must meet MIL-STD-2073-1E. Delivery is FOB origin, with inspection and acceptance occurring at destination, and no quantity variance is permitted. The delivery deadline is 20 days from contract award, with a required delivery date of August 10, 2026. The destination is Fort Riley, Kansas, for the U.S. Army, and transportation and shipment details are governed by DLAD Procurement Notes C19 and C20. Special marking codes and government use identifiers are included for logistics and tracking purposes.
ACTIVE DEVICES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, FILM
Solicitation # SPE7M5-26-T-397V
This contract specifies the procurement of a fixed film resistor identified by NSN 5905002535193 and part number RNC50H6652FS, meeting MIL-PRF-55182/1R Revision R dated 08/15/2024, with a required quantity of 2,381 units delivered FOB origin within 165 days. All components must comply with DLA packaging requirements and be marked in accordance with MIL-STD-129, including special marking code ZZ for unique requirements. The resistor must be protected from electrostatic discharge and electromagnetic interference using qualified packaging materials per MIL-PRF-81705, specifically Type I and Type III barrier materials sourced only from manufacturers listed on QPL-81705, with ESD and physical protection applied to all leads and terminals. Lead finish labeling must conform to IPC/JEDEC J-STD-609, and the item is designated as a critical application component undergoing full and open competition. The use of ozone-depleting substances is strictly prohibited in all manufacturing and processing stages unless approved in writing by the contracting officer, and mercury or mercury compounds are forbidden except in specific exempted applications such as batteries or specified instruments, with portable devices containing mercury requiring shockproof construction and secondary containment. Preservation and packaging must exclude mercury entirely under IP056, and all packaging must adhere to MIL-STD-2073-1E with preservation method GX and unit package codes as defined. Deliveries must be palletized to DLA standards and sent to the designated DLA distribution facility in New Cumberland, PA, with no variance allowed in quantity. The contract enforces strict compliance with technical and quality requirements referenced through the DLA Master List, and any proposed packaging solutions must be documented if the solicitation does not explicitly require ESD/EMI protection for items susceptible to environmental degradation.
ACTIVE DEVICES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, CER
Solicitation # SPE7M0-26-T-034P
This contract specifies the procurement of a fixed ceramic capacitor identified by NSN 5910-01-182-2217, with a quantity of one unit, under purchase request 7017784015. The item is classified as a commercial item, including commercial of a type, and must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, with applicable revision controls based on the solicitation or award date as determined by acquisition type. Physical identification and marking of the item are required, and government identification must be removed from any non-accepted supplies. Delivery is mandated within five days of award, with performance taking place at Robins AFB, GA, 31098-1626. The solicitation, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office, has a response deadline of August 20, 2026, and is solicited under SPE7M0-26-T-034P, with primary point of contact Audrey Acuna available via email and phone for inquiries.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
BATTERY POWER SUPPLY
Solicitation # SPE7L7-26-T-4660
The contract is for the supply of 10 units of a battery power supply with part number TI2000GPU-24 and NSN 6130-01-445-9539, under solicitation SPE7L7-26-T-4660, issued by the Defense Logistics Agency for the Department of Defense. Delivery is required within 20 days to the USCG Aviation Logistics Center in Elizabeth City, NC, with FOB destination terms and zero variance allowed in quantity. The item is classified as a commercial off-the-shelf product with a Type II shelf life of 12 months, extendable, and must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, including special marking code 33 for shelf life. Packaging must adhere to DLA’s procurement guidelines and include appropriate hazardous material controls as outlined in IP025. The item must not contain intentional mercury or mercury-containing compounds except where functionally necessary, such as in batteries, and any mercury-containing portable devices must include a secondary containment barrier as specified by NAVSEA. The supplier must comply with CMMC Level 2 cybersecurity self-assessment requirements and handle covered defense information per RD002. All hazardous materials must be accompanied by Safety Data Sheets (SDS) and labels conforming to OSHA’s Hazard Communication Standard 29 C.F.R. 1910.1200, and employees must be trained on these requirements. Sampling and inspection are governed by MIL-STD-1916 or equivalent zero-based plans, with acceptance standards of zero non-conformances unless otherwise stated. The contract requires full compliance with DLA’s master list of technical and quality requirements, and the item is subject to verification against critical, major, and minor attributes with assigned verification levels or AQLs. Shipping must use the fastest traceable means, explicitly prohibiting parcel post, and must follow the provided freight and parcel addresses. The solicitation is a total small business set-aside under NAICS code 334416, with responses due by August 20, 2026, and the original delivery date set for July 23, 2026.
Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
SEAL, NONMETALLIC CHANN
Solicitation # SPE7L3-26-T-168Z
The contract pertains to a nonmetallic channel seal designated by part number AT214162 and national stock number 5330014737861, with a single unit to be delivered within five days of order placement. The item must be packaged in accordance with MIL-DTL-117, Type II, Class C, Style 1, requiring a medium-duty, waterproof, greaseproof, and opaque bag to protect against ultraviolet degradation. Packaging and marking must comply fully with MIL-STD-2073-1E and MIL-STD-129, with no special marking required. All shipments are to be delivered FOB origin, inspected at destination, and shipped via traceable means—parcel post is prohibited. The delivery address is Fort McCoy, Wisconsin, with specific handling instructions for RDD shipment and hazardous materials compliance per IP025. The contract references DoD packaging and quality standards from the DLA Master List, and the revision in effect on the solicitation issue date governs requirements. The unit of issue is each, with no quantity variance allowed, and the purchase request number is 7017768611. The original required delivery date is August 10, 2026, with the solicitation issued under SPE7L3-26-T-168Z. The supplier is John Deere Construction & Forestry Co, and the contract is managed by the Department of Defense’s Land Supplier Operations Vehicle Support.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, CER
Solicitation # SPE7M1-26-T-269K
This contract outlines the procurement of a fixed ceramic capacitor, part number CCR06CG472GS, manufactured in compliance with MIL-PRF-20/36H and MIL-PRF-20N Supplement 1, both effective as of specified revision dates. The item is classified as a commercial item under FAR 11.001 and is subject to strict quality control, requiring procurement exclusively from qualified sources listed on the Qualified Product Database (QPD) in accordance with MIL-PRF-20. Commercial substitutes are prohibited without prior written government approval. The capacitor must meet all technical and quality requirements referenced through the DLA Master List of Technical and Quality Requirements, and the use of ozone-depleting substances is explicitly forbidden unless granted written authorization by the Contracting Officer. Mercury and mercury-containing compounds are prohibited in its construction or direct contact, with limited exceptions for specific functional uses such as batteries, fluorescent lighting, and naval instruments, all subject to additional containment requirements. The item must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129, including special packaging and preservation methods as defined by MIL-DTL-39028 for capacitors. Each individual unit pack must bear lead-free or lead-containing attribute markings as per IPC/JEDEC J-STD-609, with placement and documentation requirements fully specified. The delivery is FOB origin, with a total quantity of 1,281 units to be delivered within 74 days, subject to zero quantity variance. Inspection and acceptance occur at the destination, and the shipping address is designated as DLA Distribution Jacksonville. The contract prohibits the use of hazardous materials without compliance to IP025 and requires adherence to all transportation directives under DLAD Proc Notes C19 and C20. The item is designated as a critical application component, and all packaging data has been reviewed and released in SAP as of May 13, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, FILM
Solicitation # SPE7M0-26-T-034E
This contract specifies the procurement of a fixed film resistor identified by part number TNPW12062409BT-9 and NSN 5905014746356, with a quantity of one unit delivered FOB origin within five days. The item must comply with DLA packaging requirements under MIL-STD-2073-1E and marking standards per MIL-STD-129, including specific lead finish labeling in accordance with IPC/JEDEC J-STD-609, which requires accurate identification of Pb-free and other component attributes on each unit package. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The contractor must deliver to Fort Carson, Colorado, using traceable freight methods and avoid parcel post, with the shipment directed to the Central Receiving Point under the code W80BTZ. The contract includes strict zero variance in quantity, destination inspection and acceptance, and special marking requirements for compliance with federal standards. All data, including the point of contact, delivery date, and solicitation number, is tied to the DoD procurement system and is subject to government use and oversight.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, THERMAL
Solicitation # SPE7M5-26-T-396X
The solicitation SPE7M5-26-T-396X seeks the purchase of two thermal resistors (NSN 5905-01-193-7198) under FOB Destination terms with a delivery requirement of 275 days after award, culminating in a need ship date of May 23, 2027, to Tinker AFB, Oklahoma. The total estimated value is $4.00, with no option quantities or multi-line items provided, and contractors are strongly encouraged to quote ranges due to fluctuating demand, though this flexibility does not extend to Auto IDC. All offers must comply with stringent domestic sourcing requirements, including the Berry Amendment threshold of $150,000, the Buy American Act, and DFARS clauses 252.225-7006, 252.225-7012, and 252.225-7015, with non-domestic material suppliers required to disclose sourcing details. Offerors must certify they will not provide covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and must also affirm their small business status if claiming such designation, including joint venture representations under FAR 52.212-3 and 52.219-1. Compliance with hazardous materials labeling under DFARS 252.223-7001 and submission of Safety Data Sheets consistent with OSHA 29 CFR 1910.1200 is mandatory, alongside adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for markings, including CAGE codes, NSN, lot numbers, and IPC/JEDEC J-STD-609-compliant lead finish identification. Barcoding is required under MIL-STD-129, and mercury or mercury compounds are strictly prohibited. Contractors must use WAWF for invoicing and will be required to register with DLA’s AMPS system within two months to access the Vendor Shipment Module; those using VSM WebServices must update their internal schema to maintain shipping capability. Fast Pay is not applicable, and all submissions must be made electronically via DIBBS by August 20, 2026, with
ACTIVE DEVICES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
JACK, TIP
Solicitation # SPE7M5-26-T-399P
The contract pertains to the procurement of Emerson electronic connector, part number 105-0803-001, identified by NSN 5935-01-058-9244, under solicitation SPE7M5-26-T-399P. A total quantity of 1,163 units is required, split into two line items: six units at $6.00 each and 1,157 units at the same unit price, with no tolerance for quantity variance. Delivery must be completed within 165 days from the contract award, shipped FOB origin in compliance with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements. All items must be prepared for delivery using specific packaging codes, containment types, and preservation methods, with no special marking required. Inspection and acceptance occur at the destination, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stated. Critical attributes are assigned verification level VII with an AQL of 0.1. The product is classified as a critical application item. Shipping is directed to two DLA distribution points: Jacksonville, FL and Cherry Point, NC, with specific parcel and freight addresses provided. The contract adheres to DLA's technical and quality requirements as referenced in their master list, and transportation follows DLA procedures C19 and C20. The original delivery deadline was December 19, 2026, with a needed ship date of February 2, 2027.
ACTIVE DEVICES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
COIL, ELECTRICAL
Solicitation # SPE7M1-26-T-269L
The contract pertains to the procurement of a coil, electrical, identified by NSN 5950004360115 and part number MC13768, manufactured by Eaton Aerospace LLC for aerospace applications. A total quantity of 134 units is required, with delivery mandated to occur within 176 days from contract award, delivered FOB origin. Inspection and acceptance are to occur at the destination, with no tolerance allowed for quantity variance—plus or minus zero percent. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit packaging codes, while marking adheres to MIL-STD-129 without special identifiers. Palletization follows DLA packaging standards, and hazardous material handling is governed by IP025. The delivery destination is Hill AFB, Utah, with the parcel post and freight shipping address specified accordingly. Quality assurance is governed by tailored higher-level requirements, including sampling protocols that mandate zero-defect acceptance under MIL-STD-1916 or ASQ H1331 Table 1 unless otherwise directed, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes default to major classification. For simplified acquisitions, the referenced DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date or award date applies, while large acquisitions depend on the RFP issue date unless amended. All technical and quality requirements are incorporated by reference from the DLA Master List. The contract is issued under solicitation SPE7M1-26-T-269L, with a response deadline in August 2026 and an original required delivery date of July 16, 2027. The point of contact is Ryan Snyder of the Department of Defense’s Maritime Supply Chain, with unit of issue specified per ANSI X12 standards.
MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, WIRE
Solicitation # SPE7M5-26-T-397B
This contract is for the procurement of fixed wire resistors under solicitation SPE7M5-26-T-397B, with a total quantity of two units to be delivered within 20 days to the USS CHUNG HOON DDG 93 at FPO AP 96662. The item is identified by NSN 5905-00-617-8225 and must conform to strict technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, incorporating referenced R and I numbers. The use of any Class I ozone-depleting substances is prohibited in all manufacturing and testing processes unless explicitly approved in writing by the contracting officer; mercury and mercury-containing compounds are also banned unless specifically exempted for designated functional applications such as batteries, sensors, or naval-referenced reagents, with portable mercury-containing devices required to have shockproof construction and a secondary containment boundary. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129, including IPC/JEDEC J-STD-609 lead finish identification on each unit package. The contract specifies FOB destination delivery with zero quantity variance, inspection and acceptance at the delivery point, and requires compliance with DLA transportation procedures for vessel and RDD 777 shipments. Only approved vendors with designated part numbers from WARD LEONARD CT LLC, MARATHONNORCO AEROSPACE, INC., and OHMITE HOLDING, L.L.C. are eligible, and full and open competition is enforced. The contract is governed under federal procurement rules, with the purchase unit of issue being EA and unit price set at $2.00 per unit.
ACTIVE DEVICES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 484220
New
DIBBS
Specialized Freight & Destination Delivery for Regulated GoodsThe contract requires the specialized transport and delivery of packaged hazardous components to a designated location in Norfolk, Virginia, ensuring full compliance with all federal regulations governing hazardous materials handling, documentation, routing protocols, and chain-of-custody tracking. All parties involved must adhere to strict safety and security standards throughout the logistics process, with accurate recordkeeping and real-time tracking mandatory to maintain regulatory compliance and accountability. The scope encompasses end-to-end management of regulated goods, from pickup to final destination, with zero tolerance for deviation from approved procedures. This subcontract, issued under NAICS code 484220 by the Department of Defense’s Active Devices Division, has a response deadline of August 20, 2026, and was posted on August 9, 2026. Performance is localized to the Norfolk area, and bidders must demonstrate proven experience in handling regulated materials within defense supply chains. The solicitation does not specify set-aside provisions, indicating open competition, and all proposals must align with DoD standards for security, traceability, and operational integrity. Proposals should be submitted via the provided DIBBS link, as no point of contact is listed for inquiries.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Military Packaging and Marking ServicesThe contract requires the provision of comprehensive packaging, preservation, and labeling services strictly aligned with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring military-grade integrity for all materials. This includes precise bar-coding, systematic palletization, and full adherence to DLA RP001 requirements to guarantee traceability, durability, and compatibility with Department of Defense logistics systems. All work must be executed to meet stringent federal specifications for storage, transport, and handling of sensitive military assets. The solicitation is classified as a subcontract under NAICS code 493190, issued by the ACTIVE DEVICES DIVISION within the Department of Defense, with performance centered in Norfolk, Virginia, at ZIP code 23511. The response deadline is set for August 20, 2026, and potential bidders must ensure full compliance with all technical, procedural, and labeling mandates before submission. The contract emphasizes accuracy in documentation and operational readiness to support sustained military supply chain operations.
Other Warehousing and Storage

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract requires comprehensive compliance with OSHA and DFARS regulations for the handling, packaging, labeling, and documentation of hazardous materials. This includes the accurate preparation of Safety Data Sheets and the proper application of hazard warning labels to ensure all materials meet federal safety and defense standards. The work is critical to supporting military operations and must adhere to strict regulatory frameworks governing the transport and storage of dangerous goods. The solicitation is structured as a subcontract under NAICS code 541690, with a response deadline of August 20, 2026, and performance centered in Norfolk, Virginia, at the ZIP code 23511. The contracting entity is the ACTIVE DEVICES DIVISION within the Department of Defense, emphasizing the defense-related nature of the requirements. All deliverables must be executed to maintain regulatory compliance and support the integrity of defense supply chains, with no set-aside designation specified for small or specialized businesses.
Other Scientific and Technical Consulting Services

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332323
New
DIBBS
Manufacture of Heat Sink-Insulator ComponentThe contract calls for the fabrication and delivery of a specialized heat sink-insulator component that must meet rigorous military specifications, encompassing full compliance with performance, thermal, and environmental standards. The work includes design validation to ensure functional integrity, sourcing of approved materials meeting military-grade requirements, and end-to-end production under strict quality control protocols. All manufacturing processes must be documented and traceable to guarantee adherence to defense industry benchmarks, with final delivery expected at the specified performance location in Norfolk, Virginia, under the procurement oversight of the Department of Defense’s Active Devices Division. The opportunity is structured as a subcontract, with a response deadline of August 20, 2026, and was posted on August 9, 2026, indicating a limited window for qualified vendors to submit proposals. The NAICS code 332323 identifies the sector as Other Heating Equipment Manufacturing, underlining the technical nature of the component and its intended application in defense systems. While no set-aside classification is provided, the requirement demands proven experience in high-reliability component manufacturing for military applications. The sole point of reference for submissions is the DIBBS portal, and successful contenders must demonstrate capability not only in production but also in supply chain traceability and documentation to satisfy federal and defense compliance mandates.
Ornamental and Architectural Metal Work Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and SDS ManagementThe contract involves the preparation and ongoing management of Safety Data Sheets for defense-qualified connectors, ensuring full compliance with federal hazardous materials regulations. This subcontract requires precise documentation and continuous monitoring to meet Department of Defense safety and regulatory standards, specifically for connectors used in defense applications. The work must be executed in alignment with applicable federal, state, and industry guidelines to maintain the integrity and safety of materials handling, storage, and transportation. Performance is centered at Cherry Point, North Carolina, with a strict submission deadline of August 20, 2026, following a posting date of August 9, 2026. The contract falls under NAICS code 541690, which designates other scientific and technical consulting services, indicating the need for specialized expertise in regulatory compliance and chemical safety documentation. As a subcontract within the defense supply chain, adherence to strict compliance protocols is non-negotiable, and the selected provider must demonstrate a proven ability to manage complex hazardous material documentation under defense contract requirements.
Other Scientific and Technical Consulting Services

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Freight Logistics (FOB Origin)The contract entails the domestic and international transportation of connector assemblies from the manufacturer to the Defense Logistics Agency facility at Cherry Point, North Carolina, under FOB origin terms, meaning the buyer assumes responsibility for the goods once they leave the seller’s location. All shipments must comply with defense-specific documentation standards and include full tracing and tracking capabilities to ensure accountability and security throughout transit. The work is classified as a subcontract under NAICS code 484220, which covers truck transportation for specialized freight. The opportunity was posted on August 9, 2026, with a response deadline of August 20, 2026, and is managed by the Active Devices Division of the Department of Defense. Performance is designated specifically at the Cherry Point location with zip code 28533-5040, and all logistics must meet the stringent requirements of military supply chain protocols.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
Specialized Packaging and Marking ServicesThe contract requires specialized packaging, labeling, and marking services for connector assemblies to meet military compliance standards, including the application of hazardous material warnings and unique identification (UID) markings as mandated by defense requirements. All work must adhere strictly to federal and military specifications to ensure proper handling, traceability, and safety throughout the supply chain, with a focus on durability and clarity under operational conditions. The place of performance is designated as Cherry Point, North Carolina, with the deliverables intended for use within Department of Defense systems. The solicitation is issued as a subcontract under NAICS code 541380, with a response deadline of August 20, 2026, and was posted on August 9, 2026. The contract is managed by the Active Devices Division under the Department of Defense, though no set-aside provisions are specified, and the opportunity is open to qualified subcontractors capable of meeting the technical and regulatory demands of military-grade packaging and identification. All submissions must align with the requirements outlined in the DIBBS procurement system under reference number SPE7M526T398Q.
Testing Laboratories and Services

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334332
New
DIBBS
Precision Manufacturing of Electrical Connector AssembliesThe contract entails the manufacture, assembly, and rigorous testing of electrical connector assemblies meeting the SAE AS85049/88-19P03 specification, with full traceability required throughout all production stages to ensure compliance with military standards. All work must adhere to strict quality control protocols to guarantee performance, reliability, and conformance in demanding operational environments, and the deliverables must be fully documented to support auditability and accountability across the supply chain. The contract is classified as a subcontract under NAICS code 334332 and is issued by the Department of Defense’s Active Devices Division, with performance required at Cherry Point, North Carolina, 28533-5040. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026. The emphasis is on precision engineering and adherence to defense-grade specifications, requiring demonstrated capability in high-reliability electronic component production and prior experience with military or aerospace connector systems.

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541611
New
DIBBS
ITAR/EAR Technical Data and Export ComplianceThe contract requires management of ITAR and EAR-controlled technical data with strict adherence to export compliance regulations under DFARS 252.225-7048, ensuring proper access controls, employee training, and ongoing compliance measures are implemented. All activities must be conducted in a secure environment to safeguard sensitive technical information and prevent unauthorized dissemination to foreign entities, with a strong focus on maintaining regulatory integrity across all stages of data handling. This subcontract is issued under the NAICS code 541611 by the Department of Defense’s Active Devices Division, with performance expected at the facility in New Cumberland, Pennsylvania, ZIP code 17070-5002. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026. The contractor must demonstrate proven expertise in export control frameworks and be prepared to support defense-related technical operations under U.S. government compliance standards without reliance on set-aside provisions or specific small business designations.
Administrative Management and General Management Consulting Services

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
CMMC Level 2 Cybersecurity ComplianceThe contract requires the implementation and ongoing maintenance of Cybersecurity Maturity Model Certification (CMMC) Level 2 controls across systems handling Covered Defense Information (CDI). This includes executing a full compliance assessment and achieving certification through a Certified Third-Party Assessment Organization (C3PAO) to ensure alignment with Department of Defense cybersecurity standards. The work must be performed at the designated place of performance in New Cumberland, Pennsylvania, with a response deadline for proposals set for August 20, 2026. The contract is classified as a subcontract under NAICS code 541512, indicating it falls within the category of Custom Computer Programming Services, and is issued by the Active Devices Division of the Department of Defense. Compliance with CMMC Level 2 requirements is mandatory, encompassing both technical and organizational safeguards to protect sensitive defense data throughout the system lifecycle.
Computer Systems Design Services

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires comprehensive management of hazardous materials to ensure full compliance with OSHA regulations under 29 CFR 1910.1200, including identification of all hazardous substances, proper labeling that meets federal standards, and the authorship and timely submission of Safety Data Sheets for each material. These activities must be performed accurately and consistently to maintain workplace safety and regulatory alignment within the Department of Defense’s Active Devices Division. The scope of work is tied directly to the handling, documentation, and communication of chemical hazards to protect personnel and facilitate emergency response. Performance is expected at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the work falls under NAICS code 541690 for other scientific and technical consulting services. The solicitation was posted on August 9, 2026, with a firm deadline for responses on August 20, 2026, and is structured as a subcontract opportunity within the DIBBS system. There is no set-aside classification indicated, and all deliverables must adhere strictly to federal safety standards without deviation.
Other Scientific and Technical Consulting Services

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561910
New
DIBBS
Military Marking, Labeling, and Bar-Coding per MIL-STD-129The contract requires the application of standardized military markings and bar codes, including UID and Data Matrix codes, on containers in full compliance with MIL-STD-129 to ensure accurate logistics traceability across the Department of Defense supply chain. All labeling and marking must meet strict military specifications for durability, legibility, and scanability under operational conditions, ensuring seamless identification and inventory management at every stage of transport and storage. The work is tied to a subcontracting opportunity under NAICS code 561910, with performance required at the facility in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, with no set-aside provisions indicated. The contracting activity falls under the Active Devices Division of the Department of Defense, which oversees technical and logistical support functions critical to defense logistics. Interested parties must adhere to the detailed requirements of MIL-STD-129, including proper placement of labels, use of approved materials, and data accuracy for each item or container marked. Failure to comply with these standards may result in rejection of delivered goods and potential contract penalties. All work must be executed to support the DoD’s broader goal of end-to-end visibility and accountability in its supply operations.
Packaging and Labeling Services

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details